171213REV – Water Intrusion may cause Electrical Short – 2018 REV Recreation Vehicles

“This site contains affiliate links for which OEMDTC may be compensated”

NHTSA Campaign Number: 17V829
Manufacturer REV Recreation Group
Components ELECTRICAL SYSTEM
Potential Number of Units Affected 347

 

Water Intrusion may cause Electrical Short

An electrical short can increase the risk of a crash.

 

Summary

REV Recreation Group (REV) is recalling certain 2018 American Coach American Dream, American Revolution, Fleetwood Discovery, Discovery LXE, Holiday Rambler Endeavor, Endeavor XE, and Monaco Marquis recreational vehicles. Water may enter the 12-volt harness connectors due to missing gaskets or the placement of the pin connectors, potentially causing an electrical short.

 

Remedy

REV Recreation Group will notify owners, and dealers will inspect, and if necessary, install a gasket for each affected harness pin connector and re-route harnesses that terminate near luggage compartment number five, free of charge. The recall began on February 15, 2018. Owners may contact REV customer service at 1-800-509-3417. REV’s number for this recall is 171213REV.

 

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

 


February 2018

https://static.nhtsa.gov/odi/rcl/2017/RCRIT-17V829-5196.pdf

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [1.75 MB]

 


February 2018

https://static.nhtsa.gov/odi/rcl/2017/RCONL-17V829-1264.pdf

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [107.58 KB]

 


February 2018

https://static.nhtsa.gov/odi/rcl/2017/RCMN-17V829-4106.pdf

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [112.43 KB]

 


February 2018

https://static.nhtsa.gov/odi/rcl/2017/RCONL-17V829-2102.pdf

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [112.85 KB]

 


February 2018

https://static.nhtsa.gov/odi/rcl/2017/RCONL-17V829-8663.pdf

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [106.16 KB]

 


February 2018

https://static.nhtsa.gov/odi/rcl/2017/RCONL-17V829-5538.pdf

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [103.54 KB]

 


January 8, 2018

https://static.nhtsa.gov/odi/rcl/2017/RCAK-17V829-6083.pdf

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [240.49 KB]

 


 

“This site contains affiliate links for which OEMDTC may be compensated”
Bestseller No. 1
Saillong 12 AWG Wire Harness Connector Replacement Compatible with Peg-Perego 12 Volt SLA Battery Ride On Vehicle Children's Riding Toys, 2 Pins Connector Wire with 3 Pcs Fuse
  • [High Compatibility]: the harness connector is fully compatible with Peg-Perego 12 volt battery ride on toys; The quality harness connector can be applied to connect a standard 12 volt SLA battery to your vehicle; In addition to compatible with Peg-Perego, it will also help you upgrade your other batteries to lithium batteries
  • [Package Included]: you will get 1 piece of 12 volt wire harness connector, the total length of the wire harness connector is 9.8 inch/ 25 cm, please carefully check the product details before buying, also contains 3 pieces of 40 AMP fuses; Please note that batteries are not included in the package
  • [Durable Wire Harness Connector]: wheel battery wire connector is durable and lightweight, and equipped with 3 pieces fuse holder for easy connection to the ride on toys, which is faster and better; Made of quality ABS plastic, it has good resistance to shock, moisture, and corrosion
  • [Safe to Use]: the wire harness connector with 12 AWG wires and 3 pieces 40A fuse; The thick copper wire improves conductivity and safety and allows large currents to make safe use of equipment; The fuse can prevent excessive transient current from damaging the battery and equipment; 3 Pieces fuses are easy to change at any time
  • [Easy to Install]: 2 pins wire connector compact structure, easy to install and dismantle; Foolproof installation effectively improves work efficiency, you can quickly install and replace the battery; Only need few seconds will allow you to nicely increase the battery life of the riding toy; Plenty of power for your toy cars
Bestseller No. 2
Weewooday 2 Pieces Wire Harness Connector for 12-Volt SLA Battery with Heavy Duty 12 Gauge Wires and Safety Fuse Box for Most 12 Volt Kid Ride Toy Cars
  • What you get: you will get 2 pieces 12-volt wire harness connectors, the totally length of the wire harness connector is 11.1 inch/ 28.2 cm, please carefully check whether the product details before buying
  • Double protection: the wire harness connector was equipped with heavy duty 12 gauge wires and safety fuse box, double protection and use safety, you and your family can use them at ease
  • Replaceable fuse: the wire harness on the wire harness connector can be installed with 40-Amp fuses, and each wire harness connector is equipped with 3 replaceable fuses, you and your family can replace it at any time according to the actual usage
  • Not included battery: this product only contains wiring harness connectors and does not include 12V SLA batteries, you need to purchase a 12-volt battery separately to use it with the connector
  • Compatibility: the wire harness connector is fully compatible with most 12-volt riding toys (only suitable for 12V, not for 6V, please pay attention to whether the riding toys are suitable when purchasing)
SaleBestseller No. 3
SafeAMP Wire Harness Connector for Peg-Perego 12-Volt SLA Battery
  • Use it to connect a standard 12-Volt SLA battery to your Peg-Perego vehicle.
  • The connector is 100% compatible with all Peg-Perego 12-Volt ride-on toys.
  • A 40-AMP fuse (included) is installed on the harness and it is replaceable.
  • 12-Volt SLA Battery Not Included (you need to purchase a 12-Volt battery separately to use with the connector)
Bestseller No. 4
SafeAMP® Wire Harness Connector Compatible with 12-Volt Ride On Vehicle with red 2 pins Connector
  • [Compatibility] Please make sure your ride on toy have the 2 pins red connector as shown in picture to make sure our connector is compatible.
  • [Compatible Ride-On Brands] Compatible with some Best Choice Products Kids 12V Ride On Truck and Best Choice Products 12V Kids Ride-On Electric ATV
  • [Usage] Use it to connect a standard 12-Volt SLA battery to your Ride-On vehicle with red 2 pins connector.
  • [Safety] A 40-AMP fuse (included) is installed on the harness and it is replaceable. This connector has 12 AWG wire cable.
  • [Battery Not Included] 12-Volt SLA Battery Not Included (you need to purchase a 12-Volt battery separately to use with the connector)
Bestseller No. 5
Saillong 2 Pack 12 AWG Wire Harness Connector Replacement Compatible with Peg-Perego 12 Volt SLA Battery Ride On Vehicle Boys and Girls Riding Toys, 4 Pins Connector Wire with 6 Pcs Fuse
  • [High Compatibility]: the harness connector is fully compatible with Peg-Perego 12 volt battery ride on toys; The quality harness connector can be applied to connect a standard 12 volt SLA battery to your vehicle; In addition to compatible with Peg-Perego, it will also help you upgrade your other batteries to lithium batteries
  • [Package Included]: you will get 2 piece of 12 volt wire harness connector, the total length of the wire harness connector is 10.6 inch/ 27 cm, please carefully check the product details before buying, also contains 6 pieces of 40 AMP fuses; Please note that batteries are not included in the package
  • [Durable Wire Harness Connector]: wheel battery wire connector is durable and lightweight, and each equipped with 3 pieces fuse holder for easy connection to the ride on toys, which is faster and better; Made of quality ABS plastic, it has good resistance to shock, moisture, and corrosion
  • [Safe to Use]: each wire harness connector with 12 AWG wires and 3 pieces 40A fuse; The thick copper wire improves conductivity and safety and allows large currents to make safe use of equipment; The fuse can prevent excessive transient current from damaging the battery and equipment; 3 Pieces fuses are easy to change at any time
  • [Easy to Install]: 4 pins wire connector compact structure, easy to install and dismantle; Foolproof installation effectively improves work efficiency, you can quickly install and replace the battery; Only need few seconds will allow you to nicely increase the battery life of the riding taoy; Plenty of power for your toy cars
Bestseller No. 6
SefePoder Replacement Wire Harness Connector Compatible with Power Wheels 12 Volt Battery,12AWG Wire with Fuse, Lithium LiFePO4 and Lead-Acid Batteries Both Available
  • Wire harness connector compatible with 12-volt fisher price power wheels battery.
  • This wire harness connector can safely connect to standard 12 volt SLA and lithium battery to your power wheels vehicle.
  • Three 40-AMP fuses are included for easy replacement. 12AWG heavy duty output, double protection and safe use.
  • Please note that this product only contains harness connector, not include 12-Volt Battery.
  • 1*Sefepoder wire harness connector, If you have any question for our product, Contact us
Bestseller No. 7
Orion Motor Tech Wire Connector 4 Pack, 50A Wire Harness Plug Kit for 6-12 Gauge Cables, 12V-36V Battery Quick Connect Disconnect Set for Car Bike ATV Winches Lifts Motors More, Set of 4, Red
  • WIRE CONNECTOR PACK---This handy electrical wire connection set from Orion Motor Tech includes 4 clearly marked quick connect plugs that let you patch and disconnect 6 to 12 gauge (0.08"-0.16") wire pathways from 12V, 24V, or 36V batteries, supporting currents up to 50 amps
  • WIDE APPLICATION---Our versatile weatherproof QC plugs offer a simple, convenient way to handle direct power connections to car batteries; truck, ATV, and RV winches, lifts, and cranes; and trolling and outboard motors on boats and watercraft, as well as home and industrial applications like lathes, chargers, and power inverters
  • BUILT TO LAST---Each wire harness's unibody polycarbonate housing provides superior resistance to wear, corrosion, water, and heat for its full service life of over 10,000 connections; the 8 copper terminal pins are silver plated to minimize resistance and maximize stability and dependability; and the attached boot caps keep debris out between uses
  • EASY TO USE--- These quick connectors provide built-in texturing and polarity marks for sure grip and easy use; their genderless design attaches & detaches quickly and smoothly; and use is as easy as stripping the ends of your wires, fitting them into the terminals, and securing them with a crimping tool
  • SATISFACTION GUARANTEED---Order this reliable quick connecting and disconnecting plug kit with your peace of mind assured thanks to its 1 year warranty and Orion Motor Tech's friendly 24/7 customer service; order it today at no risk and enjoy hassle-free wiring for years to come!
Bestseller No. 8
jssandan Power Wire Harness Connector for 12V SLA Battery Ride Toys Replacement for Fisher-Price Power Wheels
  • The wire harness connector is compatible with all Fisher-Price Power Wheels 12V ride-on toys SLA battery
  • It can connect a standard 12V SLA battery to vehicles
  • Please note: This product does not contain 12volt SLA battery, you need to purchase it before you can use it with the connector .
  • Safe use: 12-wire gauge with safety fuse box, three 40-AMP fuses included, which can be replaced at any time .
  • Note before use: do not use overload charging, do not drag, do not overheat the components, do not contact with any liquid or electrical components.
Bestseller No. 9
Tetra-Teknica MotoBasics Series RHS-01 12V Ring Terminal Harness with Black Fused 2-Pin Quick Disconnect Plug, 2 Feet, 16 Gauge Copper Wire, 10A Fuse, 2 Per Pack
  • Plugs into a variety of maintenance battery chargers
  • Convenient for hard-to-access batteries
  • 2 feet long SPT-2 16AWG copper wire with 10A fuse
  • 2-pin quick disconnect plug compatible with most heated suits for motorcycles or snowmobiles
  • Attached weatherproof dust cover protects 2-pin quick disconnect SAE terminals from raindrops and dusts
Bestseller No. 10
12V Battery connector 2-Pin Wiring Harness with Fuse Compatible with Power Wheels 12Volt Ride on Toys Kids car Replacement Parts Ride on car Wire Harness
  • Red Square socket battery harness and 12V fuse for children's cars
  • [Safety] A 15-AMP fuse (included) is installed on the harness and it is replaceable,
  • If your car is 6v or 24V, please change the fuse on it
  • Make sure the red socket shape is consistent so that it is compatible with your charger
  • Need to buy a matching charger can be searched ASIN:"B0CSD4GWP8"

Last update on 2024-06-29 / Affiliate links / Images from Amazon Product Advertising API

This product presentation was made with AAWP plugin.

Leave a Comment

Share to...