Spindle Mount May Crack and Separate from Arm – 2023-2024 Belmont FlatTrak Trailers

“This site contains affiliate links for which OEMDTC may be compensated”

February 13, 2024 NHTSA CAMPAIGN NUMBER: 24V105000

Spindle Mount May Crack and Separate from Arm

A spindle arm that separates from the spindle mount can cause a loss of vehicle control, increasing the risk of a crash.

 

NHTSA Campaign Number: 24V105

Manufacturer Belmont Trailers LLC

Components STEERING

Potential Number of Units Affected 56

 

Summary

Belmont Trailers LLC (Belmont) is recalling certain 2023-2024 FlatTrak trailers. The spindle mount may crack, resulting in the spindle mount and spindle arm separating.

 

Remedy

Dealers will repair the spindle, free of charge. Owner notification letters were mailed February 27, 2024. Owners may contact Belmont customer service at 1-717-556-0040.

 

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.

 


Chronology :

When first cracks were discovered, we made some calls to get some local trailers back to evaluate. We decided to do a complete recall when there was more than one trailer with the defect.

 


2 Affected Products

Vehicle

MAKE MODEL YEAR
BELMONT TRAILER FLATRAK 2023-2024

 


4 Associated Documents

Defect Notice 573 Report

RCLRPT-24V105-2451.PDF 212.394KB

 


Defect Notice 573 Report

RCLRPT-24V105-1887.PDF 212.394KB

 


Recall Acknowledgement

RCAK-24V105-4926.pdf 646.523KB

 


Owner Notification Letter(Part 577)

RCONL-24V105-2870.pdf 811.939KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [792.91 KB]

 


Latest Recalls Documents

For the Latest and Most recent Recall Information Visit the link below…

https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=24V105&docType=RCL

 


 

Bestseller No. 1
SOUTHWEST WHEEL 2-Pack 2,000 lbs Trailer Axle Spindle with 4-4" Bolt Circle Hub
  • 1 1/4" Diameter, 3 3/8" long shaft, BT8 1" spindle.
  • Spindle includes spindle nut, spindle washer, and cotter pin.
  • 4-4" BT8 hub pre raced and studded.
  • Hub includes inner and outer bearing L44643, seal, grease cap, and lug nuts.
  • Rated at 1000 lbs. per spindle, two will hold 2,000 lbs.
Bestseller No. 2
RIGID HITCH INCORPORATED Pair of 5-Bolt on 4-1/2 Inch Hub Assembly (AKSQ-2000545) Includes (2) Square Stock 1 Inch Straight Spindles & Bearings
  • Pair of 1" straight spindles includes castle nuts and cotter pins.
  • Bearings included - (4) L-44643 1" inside dimension.
  • Hubs have pre-installed pressed in races.
  • Hub has a 5-bolt pattern on 4-1/2" bolt circle. Pilot diameter 2.59", flange diameter 6-1/2" and measures 4-1/4" tall (through center of hub)
  • Spindles feature a SQUARE 1-1/2" stock diameter with a bearing surface of 1 Inch
Bestseller No. 3
RIGID HITCH INCORPORATED Square Stock - Trailer Axle Spindle for 1 Inch I.D Bearings
  • 1" diameter bearing surfaces
  • 1-1/2" square mounting surface
  • Capacity 1,000 lbs - Thread 1"-14
  • Inner/outer bearings, seal not included - Nut, washer and cotter pin are included
  • Read product description below for more information
Bestseller No. 4
SOUTHWEST WHEEL 2-Pack 2,000 lbs Trailer Axle Spindle with 5-4.5" Bolt Circle Hub
  • 1 1/4" Diameter, 3 3/8" long shaft, BT8 1" spindle.
  • Spindle includes spindle nut, spindle washer, and cotter pin.
  • 5-4.5" BT8 hub pre raced and studded.
  • Hub includes inner and outer bearing L44643, seal, grease cap, and lug nuts.
  • Rated at 1000 lbs. per spindle, two will hold 2,000 lbs.
Bestseller No. 5
[2-Pack] SP466 - Spindle #42 E-Z Lube with 5-Bolt Flange for 5,200-7,000 lbs Trailer Axle
  • ✔️ [Part Number] - SP466 Trailer Axle Spindle
  • ✔️ [Stub Diameter] - 2-1/4" (2.25") | 57.15 mm
  • ✔️ [Bolt Pattern] - 8 on 6-1/2"
  • ✔️ [Fitment] - 5,200-7,000 lbs Trailer Axle E-Z lube Spindle #42
  • ✔️ [Compatible Bearings] - Bearing sets: 25580/20, 14125A/14276
Bestseller No. 6
RIGID HITCH INCORPORATED Square Stock - Trailer Axle Spindle for 1-3/8 Inch to 1-1/16 Inch I.D Bearings
  • 1.376" diameter inner bearing surface - 1.061" diameter outer bearing surface
  • 1.75" square mounting surface
  • Capacity 1,750 lbs - Thread 1"-14
  • Inner/outer bearings, seal not included - Nut, washer and cotter pin are included
  • Read product description below for more information
Bestseller No. 7
RIGID HITCH INCORPORATED Round Stock - Trailer Axle Spindle with 4-Hole Flange - 1-3/8 Inch to 1-1/16 Inch I.D Bearings
  • 1.376" diameter inner bearing surface - 1.061" diameter outer bearing surface
  • 1¾" diameter mounting surface - 4-hole flange for mounting brake backing plate
  • Capacity 1,750 lbs - Thread 1"-14
  • Inner/outer bearings, seal not included - Nut, washer and cotter pin are included
  • Read product description below for more information
Bestseller No. 8
QJZ SP504 - Trailer Spindle for 3500 lbs Axle - #84 E-Z Lube Weld-On - Drop Style (4 in) with Brake Flange Compatible with Bearings Kit: L44649/10 & L68149/11
  • ✔️ [Part Number] - SP504 Trailer Axle Spindle
  • ✔️ [Stub Diameter] - 1-3/4 inches
  • ✔️ [Overall Spindle Length] - 8-1/4 inches
  • ✔️ [Fitment] - 3,500 lbs Trailer Axle Bearing E-Z Lube #84
  • ✔️ [Center of Spindle To Center of Axle Beam] - Drop 4"
Bestseller No. 9
SOUTHWEST WHEEL 2,000 lbs Trailer Axle Spindle with 5-4.5" Bolt Circle Hub
  • 1 1/4" Diameter, 3 3/8" long shaft, BT8 1" spindle.
  • Spindle includes spindle nut, spindle washer, and cotter pin.
  • 5-4.5" BT8 hub pre raced and studded.
  • Hub includes inner and outer bearing L44643, seal, grease cap, and lug nuts.
  • Rated at 1000 lbs. per spindle, two will hold 2,000 lbs.
Bestseller No. 10
Spindle #84 E-Z Lube Weld-On with Brake Flange for 3500 lbs Trailer Axle - Compatible with Bearings Kit L44649/10 & L68149/11 - [2-Pack]
  • ✔️ [Part Number] - SP131 Trailer Axle Spindle
  • ✔️ [Stub Diameter] - 1-3/4 inches
  • ✔️ [Overall Spindle Length] - 8-1/4 inches
  • ✔️ [Fitment] - 3,500 lbs Trailer Axle Bearing E-Z Lube #84
  • ✔️ [Quantity in Package] - 2 Pack of Spindle #84

Last update on 2024-06-18 / Affiliate links / Images from Amazon Product Advertising API

This product presentation was made with AAWP plugin.

 


Leave a Comment

Share to...