“This site contains affiliate links for which OEMDTC may be compensated” |
December 29, 2023 NHTSA CAMPAIGN NUMBER: 23V903000
Non-Locking Steering Rod Ball Joint Nuts Installed
Loose or missing nuts can result in the steering rod ball joint disconnecting from the steering knuckle, causing a loss of steering and increasing the risk of a crash.
NHTSA Campaign Number: 23V903
Manufacturer Ineos Automotive Americas, LLC
Components STEERING
Potential Number of Units Affected 61
Summary
Ineos Automotive Americas, LLC (Ineos) is recalling certain 2023-2024 Grenadier vehicles. Non-locking nuts may have been mistakenly installed on the steering rod ball joint.
Remedy
Dealers will install locking steering rod ball joint nuts, free of charge. Owner notification letters are expected to be mailed January 26, 2024. Owners may contact Ineos customer service at 1-919-296-3626.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
27/12/2023
IARCM002873
Tie Rod and Drag Link – Inspect Fixings
Reason for this document
Issue: An issue has been identified on a small percentage of the affected vehicles where the tie rod and drag links may have the incorrect fixing installed.
Cause: Manufacturing process.
Action: Follow the procedure below.
Chronology :
In early December 2023, INEOS became aware of reports involving two vehicles with loose steering rods observed. Separately, INEOS received a report related to a vehicle with a lost drag link during off-road driving.
INEOS initiated an investigation which included an inspection of internal fleet vehicles. This inspection revealed one vehicle in which was installed a non-locking nut instead of a locking nut at the steering rod ball joint. INEOS then conducted an analysis of the screwing curves of vehicles with the locking vs. non-locking nut.
Even though the non-locking nut had been torqued to the appropriate value, there was a potential for the nonlocking nut to loosen over time. On December 21, 2023 INEOS determined that a safety related defect exists in the identified vehicles and that 5 of those vehicles had been customer delivered.
2 Affected Products
Vehicle
MAKE | MODEL | YEAR |
INEOS | GRENADIER | 2023-2024 |
3 Associated Documents
Defect Notice 573 Report
RCLRPT-23V903-6400.PDF 214.018KB
Recall Acknowledgement
Remedy Instructions and TSB
RCRIT-23V903-6388.pdf 216.501KB
Latest Recalls Documents
For the Latest and Most recent Recall Information Visit the link below…
https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=23V903&docType=RCL
- ALL IN ONE FRONT END SERVICE KIT: Containing 5 adjustable tools for a wide range of domestic and import vehicles. Comes with 1x Ball Joint Separator, 1x Tie Rod and Ball Joint Remover, 1x Conical Pitman Arm Puller, 1x Pitman Arm and Tie Rod End Puller, 1x Pitman Arm Puller, 1x well-organized ABS case.
- HARDENED ALLOY CONSTRUCTION: Extraordinarily tough and durable alloy means these tools can stand up to the toughest jobs. This front end service tool kit can remove the most stubborn ball joints, tie rod ends, and pitman arms.
- UNIVERSALLY COMPATIBLE WITH A WIDE RANGE OF VEHICLES: The versatile design allows this tool to be used as a pitman arm remover, ball joint separator, or tie rod end puller for many small, domestic rear-wheel-drive vehicles, import vehicles, and light trucks.
- PROFESSIONAL PORTABLE ABS CASE: The custom-molded case is crafted from high-quality ABS hard plastic for the amateur or professional mechanic on the go. Conveniently keeps all your tools in one organized and secure place. Never miss out on a job or project from a misplaced tool.
- ORION MOTOR TECH PROMISE: If any issues from our tools arise please don’t hesitate to contact us. We guarantee the quality of our tools and want to ensure you’re only getting the best. Because to do perform your best, you deserve the best, that’s our Orion Motor Tech Promise.
- 1. ALL IN ONE FRONT END SERVICE KIT: Containing 5 adjustable tools for a wide range of domestic and import vehicles. Comes with 1x Ball Joint Separator, 1x Tie Rod and Ball Joint Remover, 1x Conical Pitman Arm Puller, 1x Pitman Arm and Tie Rod End Puller, 1x Pitman Arm Puller, 1x well-organized ABS case.
- 2. HARDENED ALLOY CONSTRUCTION: Extraordinarily tough and durable alloy means these tools can stand up to the toughest jobs. This front end service tool kit can remove the most stubborn ball joints, tie rod ends, and pitman arms.
- 3. UNIVERSALLY COMPATIBLE WITH A WIDE RANGE OF VEHICLES: The versatile design allows this tool to be used as a pitman arm remover, ball joint separator, or tie rod end puller for many small, domestic rear-wheel-drive vehicles, import vehicles, and light trucks.
- 4. PROFESSIONAL PORTABLE ABS CASE: The custom-molded case is crafted from high-quality ABS hard plastic for the amateur or professional mechanic on the go. Conveniently keeps all your tools in one organized and secure place. Never miss out on a job or project from a misplaced tool.
- 5. ORION MOTOR TECH PROMISE: If any issues from our tools arise please don’t hesitate to contact us. We guarantee the quality of our tools and want to ensure you’re only getting the best. Because to do perform your best, you deserve the best, that’s our Orion Motor Tech Promise.
- FRONT END SERVICE KIT: This 3 piece ball joint removal tool set from Orion Motor Tech includes lever and scissor style ball joint separators and a conical pitman arm puller so you can quickly and safely remove standard pitman arms, outer tie rods, and ball joints without the damage often caused by hammers and pickle forks
- VERSATILE FITMENT: The pitman arm tool has a 0.8" (20mm) jaw spread and depth; the levered ball joint separator has a 0.9" (21.6mm) jaw spread, 0.8" (19.5mm) jaw depth, and 2.2" (55mm) max opening; and the scissor-style ball joint puller & tie rod end tool has a 0.8" (19mm) jaw spread, 1.3" (33mm) jaw depth, and 2.1" (52.5mm) max opening
- POWERFUL LEVERAGE: Our heat-hardened alloy steel tools and their forcing screws coated in corrosion-resistant black oxide will give you outstanding durability and performance, so your ball joint kit will have the strength to remove even the most stubborn, stuck, and seized parts time after time
- CONVENIENT ORGANIZATION: The custom molded case is crafted from ABS hard plastic for the amateur or professional mechanic on the go; never miss a job, with everything well organized for storage or transport
- FRIENDLY REMINDER: Please verify compatibility by comparing the component specs with your vehicle's parts
- Application: Compatible with BMW E38, E39, E52, E60, E61, E70, E83, E90, E91, E92, R50, R52, R53, RR1, RR2, X5. compatible with Mercedes W211, W219, W220, and W230. Compatible with Porsche 996 Carrera. Compatible with Audi A4, A6 lower suspension ball joint;Compatible with Land Rover
- Efficient Removal Ball Joint: Specially for quick and easy removing the ball joint connections, removal of tie rod ends, steering knuckles, and lower control arms to replace a ball joint. If you are doing any type of suspension work, this is a essential too. It makes separating ball joints as easy as a snap
- Not Damage Ball Joint Boot : Use this tool instead of the pickle fork. This tool is quieter, takes less effort, and most important of all, it does not damage the ball join boot. A must have if you are working on the suspension and have to separate the ball joint but are not planning on replacing it
- Easy To Use: lubricated the threads on this separator and applied turns slowly to the driver screw. the ball joint will violently popped out of the steering knuckle
- Heavy Duty: This ball joint separator made of heavy duty steel, thick and durable, which could withstand a lot of potential energy without breaking. and we offer 12 months warranty
- 🚗 For automotive front end work including changing tie rod ends, ball joints steering linkages and steering boxes. Pullers designed to permit part reuse versus “pickle-fork” type tools that may damage parts. Includes Tie Rod End Pullers, Pitman Arm Puller, Ball Joint Remover and Tie Rod End Lifter. Any automotive specialty tool will help make an automotive repair or maintenance task easier.
- 🚗 The kit can be used to easily removes common pitman arms, tie rods, and ball joints. The set includes 1 pitman arm puller, 1 universal ball joint separator, 1 outer tie rod remover, and 2 tie rod end pullers. All-in-one Tool Set in a heavy-duty blow-mold case with handle and latches for secure storage and easy storage.
- 🚗 Ball joint separator set is made of premium and durable alloy which can stand up to the toughest jobs.Removes the most stubborn ball joints, tie rod ends, and pitman arms.Each tool was built to withstand high-force applications.
- 🚗 The full range adjustable tool set with different shapes and size allows for both foreign and domestic vehicles. Effective press-type ball joint separator allows easy separation of pitman arms, tie rods, and ball joints without damaging to boots and other parts that fork-type removers may cause.
- 🚗 Handor ball joint separator tools are (by far) the easiest means possible for removing ball joints. This high quality ball joint separator is essential for auto mechanics and car enthusiasts to easily loosen and remove ball joints for replacement and repair!
- All-in-One Front End Service Kit: Acymner's 3-piece set features lever and scissor-style ball joint separators, along with a conical pitman arm puller. Effortlessly remove pitman arms, outer tie rods, and ball joints without causing damage.
- Versatile Fitment: With jaw spreads and depths tailored for various applications, our tools ensure versatility. Tackle automotive tasks with ease using our pitman arm tool, levered ball joint separator, and scissor-style ball joint puller & tie rod end tool.
- Universal Compatibility: Highly adjustable for steering and suspension systems, our tools suit hundreds of makes and models, including American, European, and Japanese cars, light trucks, SUVs, and ATVs.
- Powerful Leverage: Crafted from heat-hardened carbon steel, our tools deliver exceptional durability. The corrosion-resistant black oxide-coated forcing screws provide the strength needed to tackle stubborn pitman arms, tie rods, and ball joints.
- On-the-Go Organization: The hard plastic case keeps both amateur and professional mechanics organized. Never miss a job with neatly arranged tools for easy storage or transport.
- 【Wide Application】This bearing extractor can complete a wide variety of pulling jobs on many different pieces of equipment; The parts within this bearing splitter set are effective in removing bearings, pulleys, gears, and bushes, the versatile design allows this tool to be used as a pitman arm remover, ball joint separator, or tie rod end puller for many small, domestic rear-wheel-drive vehicles, import vehicles, and light trucks
- 【High Efficiency】 Duratech bearing puller set has up to 5 Tons capacity and can be used separately or with other puller tools, giving the user options to deal with various pulling jobs. Suitable for beginners or professionals to use
- 【High-quality Materials】You don’t have to worry about this bearing puller set of tools breaking on the job; Constructed from heat treated Chrome Alloy steel with black oxide finish, this pinion bearing puller set ensures corrosion resistance and long-term durability under even punishing use
- 【Package List】1 × Pitman arm and tie rod end puller, 1×Pitman arm puller, 1×Conical pitman arm puller, 1×Ball joint separator, 1×Tie rod and ball joint remover
- 【Protective Carrying Case】Each component is contained in a heavy-duty plastic carrying case with a handle for safe storage and quick organization. If you are not satisfied with this product or if you have any questions, please feel free to let us know, give it a try and if you realize you have one of the few vehicles that it doesn't fit, please don’t hesitate to reach out to our team
- ESSENTIAL TOOL FOR BALL JOINT SERVICE - Use the ORION MOTOR TECH Ball Joint Press Set Ball Joint Tool / Bushing Removal Tool with 4WD Adapter to effortlessly remove press fit parts including ball joints, U-joints, brake anchor pins, and more on most 2-wheel drive (2WD) and 4-wheel drive (4WD) vehicles without removing the control arm from the vehicle.
- PROFESSIONAL GRADE QUALITY AND DURABILITY - Off road weekend warriors, novices, and professional mechanics trust the ORION kit because ORION MOTOR TECH sources the highest quality components from around the world. Constructed from heavy-duty forged steel with black-oxide finish on adapters for maximum strength and longevity that resists rust and corrosion.
- UNIVERSALLY COMPATIBLE WITH A WIDE RANGE OF VEHICLES - Fit most American domestic and imported 2-wheel drive (2WD) and 4-wheel drive (4WD) cars and light pickup trucks that have press-fit type ball joints, include 4-wheel drive (4WD) adapter that allows service for 1967 thru current 1/2 and 3/4 ton 4WD vehicles having the Dana 30 or 44 front axle (found on Ford, GM, Dodge, IHC and Jeep vehicles).
- CONVENIENTLY ORGANIZED IN CUSTOM MOLDED CASE - Ball joint press / bushing/ removal tool kit is enclosed inside a heavy-duty 11” x 3” x 15” inch (27.9cm x 7.6cm x 38.1cm) plastic blow-molded carrying case with handle for easy storage, safe storage, and quick organization. Package include: 3x Receiving Tube, 1x Removal Adapter, 1x Installation Adapter, 1x Screw, 1x Install Cup Adapter, 1x Forcing-screw Press, 1x Receiving Cup, 1x Installing Cup.
- ORION MOTOR TECH - We pursue outstanding quality and professional technical support. If you are not satisfied with this product or if you have any question, please feel free to let us know.
- Professional front end service tool set makes it easy to separate pitman arms, tie rods, and ball joints without damage.
- Total 5 units tools are in different shapes and sizes, can remove even the most stubborn ball joints/ tie rods/ pitman arms.
- Made of heat-treated alloy steel, with great strength and durability, offering 1 year warranty.
- All tools were packed in a convenient ABS carrying case for easy storage and transportation.
- List: 1x ball joints separator, 2x C-shape small/ large pitman arms puller, 2x tie rods remover.
- Gearwrench's Ball Joint Separator is made for separating the ball joint from the spindle support arm on domestic and import front wheel drive vehicles
- Adjustable for different size ball joints
- Suitable for most cars and light trucks (not intended for use on 3/4 ton or 1 ton trucks)
- Works on ball joints from 1-1/8” to 2-1/8” and 30 to 56mm in size
- Slot is 7/8" wide by 1-1/4" Deep
Last update on 2024-04-14 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.
SEOCONTENT-START
OMB Control No.: 2127-0004
Part 573 Safety Recall Report 23V-903
The information contained in this report was submitted pursuant to 49 CFR §573
Manufacturer Name : Submission Date :
Ineos Automotive Americas, LLC DEC 29, 2023 NHTSA Recall No. : 23V-903 Manufacturer Recall No. : NR Manufacturer Information :
Manufacturer Name : Ineos Automotive Americas, LLC Address : 2020 Progress CT STE 100-112
Raleigh NC 27608
Company phone : 919-296-3626
Population :
Number of potentially involved : 61 Estimated percentage with defect : 100 %
Vehicle Information : Vehicle 1 : 2023-2024 INEOS AUTOMOTIVE GRENADIER
Vehicle Type : LIGHT VEHICLES Body Style : STATIONWAGON Power Train : GAS
Descriptive Information : The affected vehicles were determined based on analyzing production records, and include units that were assembled during the production period where an incorrect part may have been used until a production change was introduced.
Production Dates : MAY 17, 2023 – DEC 04, 2023
VIN Range 1 : Begin : SC6GM1CA0RF010858 End : SC6GN3CAXPFP10148 Not sequential Description of Defect :
Description of the Defect : On certain MY23 and MY24 vehicles, incorrect non locking steering rod ball joint nuts may have been used during assembly instead of a locking nut which could result in the nut becoming loose over time or potentially result in a lost nut condition. If the nut loosens to the point at which it becomes lost, the steering rod ball joint can become uncoupled from the steering knuckle.
FMVSS 1 : NR FMVSS 2 : NR
Description of the Safety Risk : If the non-locking nut loosens enough that it becomes lost and the steering
rod ball joint uncouples from the steering knuckle, a loss of steering functionality could occur.
Description of the Cause : NR Identification of Any Warning
that can Occur : Steering free play, excessive vibration and noise as a result of a loose nut.
Involved Components : Part 573 Safety Recall Report 23V-903 Page 2 Component Name 1 : NR Component Description : NR Component Part Number : NR Supplier Identification : Component Manufacturer
Name : INEOS AUTOMOTIVE LIMITED
Address : Hawkslease, Chapel Lane, Lyndhurst Foreign States SO43 7FG
Country : United Kingdom Chronology :
In early December 2023, INEOS became aware of reports involving two vehicles with loose steering rods observed. Separately, INEOS received a report related to a vehicle with a lost drag link during off-road driving. INEOS initiated an investigation which included an inspection of internal fleet vehicles. This inspection revealed one vehicle in which was installed a non-locking nut instead of a locking nut at the steering rod ball joint. INEOS then conducted an analysis of the screwing curves of vehicles with the locking vs. non-locking nut. Even though the non-locking nut had been torqued to the appropriate value, there was a potential for the non- locking nut to loosen over time. On December 21, 2023 INEOS determined that a safety related defect exists in the identified vehicles and that 5 of those vehicles had been customer delivered. Description of Remedy :
Description of Remedy Program : INEOS dealers will perform at no charge to the customer, a replacement of
the steering rod ball joint nuts. How Remedy Component Differs from Recalled Component :
Identify How/When Recall Condition was Corrected in Production : The replacement nut utilizes an oval lock nut design to secure the fastener. Running changes were made to the production line assembly process on December 7th. Recall Schedule :
Description of Recall Schedule : Communicate notification to dealers beginning 12.29.2023. Distribute
recall notice to customer vehicles within 60 days of the recall filing. The information contained in this report was submitted pursuant to 49 CFR §573 Part 573 Safety Recall Report 23V-903
Page 3
The information contained in this report was submitted pursuant to 49 CFR §573
Customers will be advised to seek reimbursement for pre-notification remedies through INEOS.
Planned Dealer Notification Date : DEC 29, 2023 – DEC 29, 2023
Planned Owner Notification Date : JAN 26, 2024 – JAN 26, 2024
* NR – Not Reported
**************************************************************************************************************
Page 1
Recall
INEOS Automotive Limited, 15-19 Britten St, London SW3 3TY, UK
© Copyright INEOS Automotive Limited, 2022
Released Date Doc No.
Title Affected Vehicle(s)
27/12/2023
IARCM002873
Tie Rod and Drag Link – Inspect Fixings Grenadier PF000020 – PF000132 PFP10138 – PFP10153 RF006422 – RF010952 Prior to starting any reworks, please make sure you check the vehicle is affected by checking the VIN using Vehicle Simple Search in the Warranty System. Reason for this document
Issue: An issue has been identified on a small percentage of the affected vehicles where the tie rod and drag links may have the incorrect fixing installed.
Cause: Manufacturing process. Action: Follow the procedure below. Workshop Procedure
TOPIC – Tie Rod and Drag Link – Inspect Fixings
Operation Repair Time
Visually inspect all 4 fixings – All OK 0.2
Visually inspect all 4 fixings – Replace Fixings as Required 0.3
Parts
Part Number Description Qty
GRA-0000-004680 M16 Nut 4 (as required)
Information
1 Tie Rod Location Drag Link Location Recall Procedure – Drag Link 1 Raise the vehicle on a ramp. Refer To: TOPIC_0000000382 Lift Vehicle On Ramp
2 Measure both drag link fixings as shown in the image below. Warning: The correct fixing will be a locknut type fixing. Incorrect fixing will be a standard type fixing. – If either of the fixing measurements are 15.7 mm, go to step 3.
– If both fixing measurements are 17.7 mm, go to step 7.
3 Remove and discard the fixings that measured 15.7 mm.
4 Install new fixings as required. Torque: 100NM
5 Release the Vehicle INEOS Automotive Limited, 15-19 Britten St, London SW3 3TY, UK
© Copyright INEOS Automotive Limited, 2022 Page 2 Recall Procedure – Tie Rod 1 Raise the vehicle on a ramp. Refer To: TOPIC_0000000382 Lift Vehicle On Ramp
2 Measure both tie rod fixings as shown in the image below. Warning: The correct fixing will be a locknut type fixing. Incorrect fixing will be a standard type fixing. – If either of the fixing measurements are 15.7 mm, go to step 3.
– If both fixing measurements are 17.7 mm, go to step 7.
3 Remove and discard the fixings that measured 15.7 mm. 4 Visually inspect the thread of the affected ball joint(s). – If the thread of the affected ball joint(s) is damaged, go to step 5.
– If the thread of the affected ball joint(s) is not damaged, go to step 6.
5 Install new fixings as required. Torque: 100 Nm
6 Release the vehicle. INEOS Automotive Limited, 15-19 Britten St, London SW3 3TY, UK
© Copyright INEOS Automotive Limited, 2022 Page 3 Page 4
Recall
INEOS Automotive Limited, 15-19 Britten St, London SW3 3TY, UK
© Copyright INEOS Automotive Limited, 2022
Change History
Reference No. Date Description
IARCM002873 27/12/2023 First release
**************************************************************************************************************
**************************************************************************************************************
SEOCONTENT-END