“This site contains affiliate links for which OEMDTC may be compensated” |
December 21, 2023 NHTSA CAMPAIGN NUMBER: 23V873000
Overloaded Electrical System May Cause Fire
Overloaded electrical circuits can overheat, increasing the risk of fire.
NHTSA Campaign Number: 23V873
Manufacturer REV Ambulance Group Orlando, Inc.
Components ELECTRICAL SYSTEM
Potential Number of Units Affected 25
Summary
REV Ambulance Group Orlando, Inc. (REV) is recalling certain 2020-2024 Type I, III and IX vehicles. In the event of a short circuit or wiring failure, the firmware may fail to shut off the output pin, resulting in overloaded electrical circuits.
Remedy
Dealers will update the firmware, free of charge. All vehicles were repaired by December 14, 2023, therefore no owner notification letters will be sent. Owners may contact REV customer service at 1-855-661-9232.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Chronology :
REV Ambulance Gorup Orlando, Inc. (REVO) warranty department received a Technical Service Bulletin (TSB), regarding Equipment recall 23E-084. REVO was notified on December 13th, 2023. REVO conducted an inventory inspection on December 14th and determined that 25 units were affected. All units have been updated to correct the issue, per Weldon’s provided instructions.
23E084 – Overloaded Electrical System May Cause Fire – Weldon 8×16 Input-Output Node Vehicle Multiplex Systems
12 Affected Products
Vehicles
MAKE | MODEL | YEAR |
REV AMBULANCE | TYPE I | 2020-2024 |
REV AMBULANCE | TYPE III | 2020-2024 |
REV AMBULANCE | TYPE IX | 2020-2021 |
4 Associated Documents
Defect Notice 573 Report
RCLRPT-23V873-3525.PDF 213.48KB
Recall Acknowledgement
RCAK-23V873-9023.pdf 645.619KB
Recall 573 Report-Amendment 1 – 12/29/2023
RCLRPT-23V873-4910.PDF 213.499KB
Recall 573 Report-Amendment 2 – 01/08/2024
RCLRPT-23V873-6101.PDF 213.513KB
Latest Recalls Documents
For the Latest and Most recent Recall Information Visit the link below…
https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=23V873&docType=RCL
- 【Meet Different Needs】 The 12V round voltmeter comes with a panel and a nylon nut, which can be mounted separately on the 29mm diameter mounting hole or fixed on the matching panel, so that it could meet your different mounting needs.
- 【Blue LED Display】 This 12V battery meter with blue LED light, can be widely used under DC 12V 24V. With the digital voltage meter, you can easily monitor the voltage status of your car battery in real times, especially in dark environments.
- 【Waterproof & Useful】 The marine voltmeter gauge is waterproof design, so this LED voltmeter is safe to use even in moist environments. And also the mini voltmeter is fit for 12V 24V cars, automotive, motorcycles, RVs, SUV, Off-road, ATV, boats, marine, ships, trucks, tractor, etc.
- 【Measuring Range】 The rating of this battery voltage monitor is DC 8-48V, and its accuracy is 0.1V. With the precise 3-digit LED digital voltmeter, you can better monitor of the car's battery voltage status, helping to extend battery life.
- 【Easy installation】 This 12 volt battery monitor comes with a set of wires, two mounting screws, a matching panel and a nylon nut, making it easy to install and use.
- Efficient setting key: the multifunctional battery capacity indicator has a new design of the front setting button, and have several functions: cycle voltmeter/battery percentage, turn on the backlight, black, sleep mode, battery type selection etc.
- Humanized designs: the battery capacity voltage indicators are designed with switched function button, you can press to check the battery capacity or real-time voltage and turn off, with alarm design, the battery meter display will flash when the battery capacity is low
- Fit different battery: the battery gauge indicators are compatible with 12V/ 24V/ 36V/ 48V/ 60V/ 72V/ 84V acid battery, ternary lithium battery, polymer lithium-ion battery, 3 -15 series lithium ion battery, storage battery, water battery and more
- LCD display: the battery capacity gauge indicators come with PVC waterproof screen protector with bright back-light, which makes you can read the results on the clear LCG display from different angles, low working power consumption and the max is 5 mA
- Suitable for: the battery meters with alarms can be applied to different machines and places such as garden, home, office and more, can serve you for a long time, meeting your different needs and practical battery indicators will give you nice experience
- Universal battery capacity indicator voltage meter - wide voltage input range DC 12V-84V Lead-acid Batteries and 3S-26S Lithium Batteries: Ternary lithium batteries, polymer batteries, lithium-ion batteries, storage batteries.
- Multifunctional Battery Capacity voltage meter Indicator - Battery tester Right Switch key can switch voltmeter, battery percentage, switch off. Left setting key have several functions: Cycle voltmeter/battery percentage, turn on the backlight, black, sleep mode, battery type selection etc.
- High Quality of battery voltage meter - Large LCD screen display with green backlit and low power consumption.Two display modes can be available: battery symbol and battery percentage, battery symbol and voltmeter.
- Safety to Use - The battery voltage meter Built-in 30cm power cable, simple to connect. Reverse protection design, won't burn if connect reversely.
- Portable and Waterproof voltage meter- Small size, light weight, equipped with a PVC film, the surface is waterproof.
- 3 in 1 battery voltage meter - With a switched function button to choose the battery capacity, real-time voltage or turn off; New alarm function, when the battery capacity is lower 20%, the screen display will flash to alarm.(Note: package only include 1 battery meter!)
- Universial battery status monitor - wide working voltage input range DC 12V-84V.Can be automatically detect to the accurate capacity according to the battery voltage.
- Suitable for various battery types - fits to 12V/24V/36V/48V/60V/72V/84V lead acid battery, Ternary Lithium battery, Polymer lithium-ion battery, 3-28 series Lithium ion battery, Storage battery, Water battery and 4-28 series Lithium Iron Phosphate batteries, etc
- Sensitive LCD digital display - the small battery voltage reader with a PVC waterproof screen protector, clear and bright green backlight LCD display from any angle; Low working power consumption(5mA max), in additional there's a turn off button for it.
- Multifunctional application - suitable for golf cart, RV, marine, boat, club car, motorcycle, car, bike, ebike, scooter, truck, vehicle, jet ski, forklift
- Fits for DC 12V/24V cars, test range: DC 7V-35V; Each voltage meter has passed QC test prior to shipping
- Made of high quality PC material, durable and waterproof, works well in wet enviroment
- EASY TO READ: Bright and clear led digital display, reads fine on any light condition
- EASY TO INSTALL: Comes with mounting plates, tightening rings, spade connectors and screws for easy installation and wiring
- Measurement Accuracy: 0.1V-0.2V, perfect for car/motorcycle/RV/truck/boat/ATV/UTV etc.
- HIGH PERFORMANCE DUAL USB CHARGING PORTS - 24W / 4.8A USB Car Charger charges your favorite mobile devices Compatible for iPad (max speed), iPhone XS, XR, 8 Plus (max speed), HTC, Galaxy, MP3 Players, Digital Cameras, PDAs, Mobile Phones.
- REAL-TIME MONITORING - Concise LED screen displays vehicle’s operating voltage (12V/24V) or the total USB charging output (5V/4.8A Max) in real time, fully controlling the whole charging process. The LEDs are bright enough to read the display without being a distraction while driving.
- SAFE ON THE GO - Intelligent circuit design protects against short circuiting, over-heating, over-currents, and over-charging. Charging stops when battery is full.
- COMPACT DESIGN - One of the industry's smallest USB car chargers for added portability, featuring two USB ports and an LED Display make it easy to access after dark. Input: 12-24V; Output: DC 5V 4.8A or 24W (Shared by two ports). One Year Warranty.
- 12 MONTHS WARRANTY - Comes with 30 days Money Back Guarantee and 12-Months Hassle-free Replacement Warranty.
- What you get: you will receive 1 pieces of double voltmeters, which remind you of charge or replacement in time, effectively avoid emergent dead battery at starting car engine
- Practical LED digital display: the double voltmeters are embedded in 3-bit LED digital display, clearly shows you the current precise readings of working volts, well helps you to early notice your car voltage condition
- Wide range of application: large input of up to DC 60V with over-current, over-volt and short circuit protection, well protects the whole circuit, fits for most 12-24V car, motorcycle, RV vehicles and boats
- Reliable material: made of flame retardant and durable nylon material, good conductivity pins with black matte surface treatment, wear and tear resistant, suitable for long lasting usage
- Convenient to install: panel mount and easy to install, drill size measures approx. 1.15 inch in diameter, with locking fastener for stable mounting, fits to almost all panel locations you desired
- 🔋【Essential Tool for Your Garage】Don't let your car battery suffer from the damaging effects of disuse or harsh climates. BM300 can help monitor your battery health, including Voltage, Cranking, Charging system and travel records. Quickly reads data (Accuracy over 99.5%) to determine if the car battery is abnormal and take appropriate measures to protect the battery.
- 🔋【Easier Monitoring with Bluetooth Connection】Say goodbye to standing in front of the monitor during the monitoring process! 3.2-ounce battery monitor allows you to sit comfortably in your car or anywhere within 33ft range and monitor real-time battery data for proactive intervention. Whether it's raining, sunny, or snowy, easily conduct real-time monitoring of the battery from the comfort of your car.
- 🔋【Hassle-free Monitoring of Once Installation】Install once and permanently attach to your battery, saving the hassle of repetitive installation. Access battery health data directly from your phone and enjoy real-time monitoring as long as the APP is on. In addition, with an average power consumption of only 1.5mA that it can be almost unnoticeable. So you don't have to worry about the BM300 draining your battery by being attached to it all the time.
- 🔋【Quality Assurance with Safety as Priority】Built-in electrical overload circuit breaker with reverse polarity protection function ensures user safety during operation. The fire-resistant housing enhances high-temperature durability for added safety. In addition to these safety features, it also boasts exceptional alarm functionality. Which will notify you via the APP when the battery encounters malfunctions, abnormal voltage or power, alleviating your concerns in this regard.
- 🔋【Trustworthy Original Material】Automotive battery monitor is built to withstand extreme conditions with its durable ABS shell, providing top-notch impact resistance. The connectors are designed with red and black rubber grips for easy placement on the battery terminals, making for efficient testing to achieve the best performance.
- Switch Control:The voltage gauge waterproof a more accurate battery voltage. You can toggle between voltage and battery percentage or turn it off to reduce battery drain while in storage.
- oltage Gauge: Support 5-48V Input Voltage. Power display range 0-100%. Precise 3-bit LED digital display.
- Check States: Battery Capacity Voltage Monitor Gauge Indicator better helps you to early notice your car voltage condition.
- Widely Use: Fit for 5-58V Cars, Motorcycles, RV, SUV, Off-road, ATV, Boat, Marine, Ship, Truck, Tractor etc.Mini size and easy to install.
- Package Includes: 1 x Car Voltmeter Gauge; 2 x Insulated Terminals; 2 x Screws, 2 x Wires.
- Compact & Effortless Installation: Mini-sized and added wires designed for convenience and easy installation. This digital car voltmeter has a measurement range from 5V to 30V, ensuring compatibility with various power systems.
- Clear LED Display: Equipped with a precise 3-bit LED digital display, facilitating easy readability. Enables real-time monitoring of battery voltage, providing instant insights into your battery's status.
- Battery Status at a Glance: Timely awareness of battery voltage between full charge and discharge, ensuring proactive maintenance and optimal performance.
- Complete Package: Each package includes 1 Car Voltmeter Gauge, 2 wires, and 2 Screws.
- Versatile Compatibility: Compatible with a wide range of vehicles, including Cars, Motorcycles, RVs, SUVs, Off-road vehicles, ATVs, Boats, Marine vessels, Ships, Trucks, Tractors, and more. Supports both 12V and 24V systems.
Last update on 2024-06-11 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.
SEOCONTENT-START
OMB Control No.: 2127-0004
Part 573 Safety Recall Report 23V-873
The information contained in this report was submitted pursuant to 49 CFR §573
Manufacturer Name : Submission Date :
REV Ambulance Group Orlando, Inc. DEC 21, 2023 NHTSA Recall No. : 23V-873 Manufacturer Recall No. : NR Manufacturer Information :
Manufacturer Name : REV Ambulance Group Orlando, Inc.
Address : 2737 N. Forsyth Road
Winter Park FL 32792 Company phone : 800-628-8178 Population :
Number of potentially involved : NR Estimated percentage with defect : NR Vehicle Information : Vehicle 1 : 2020-2024 REV Ambulance Group Orlan Type I, Type III, & Type IX Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES
Body Style :
Power Train : NR
Descriptive Information : REV’s Type I, Type III, and Type IX vehicles are equipped with Weldon’s Vmux 8×16 Input/Output Node and are subject to recall. Weldon provided quantities and serial numbers.
Production Dates : JAN 01, 2020 – JUN 30, 2023
VIN Range 1 : Begin : NR End : NR Not sequential Description of Defect :
Description of the Defect : In the affected products, short circuit protection may not function properly. In the case of a short circuit in the wiring or the connected load, overheating of the wiring or the load may occur.
FMVSS 1 : NR FMVSS 2 : NR
Description of the Safety Risk : Depending on how the product is installed in the vehicle, this could increase the risk of a vehicle fire.
Description of the Cause : NR
Identification of Any Warning
that can Occur :
NR
Involved Components : Part 573 Safety Recall Report 23V-873 Page 2 Component Name 1 : V-MUX 8 x 16 Input / Output Node Component Description : I
Component Part Number : 6030-2000-00 Supplier Identification : Component Manufacturer
Name : Weldon Division of Akron Brass Address : 3656 Paragon Drive
Columbus Ohio 43228
Country : United States Chronology :
REV Ambulance Gorup Orlando, Inc. (REVO) warranty department received a Technical Service Bulletin (TSB), regarding Equipment recall 23E-084. REVO was notified on December 13th, 2023. REVO conducted an inventory inspection on December 14th and determined that 25 units were affected. All units have been updated to correct the issue, per Weldon’s provided instructions. Description of Remedy :
Description of Remedy Program : If the vehicle is equipped with a V-MUX 8 x 16 Input / Output Node the end
user must perform a firmware update. Weldon will be responsible for reimbursing the facility for performing the repairs. How Remedy Component Differs from Recalled Component :
Identify How/When Recall Condition was Corrected in Production : NR On December 13th we received notification from Weldon that there was an issue with the VMUX 8 x 16 Input/Output Node. On December 14th we identified the affected population and updated the firmware for the affected components. Recall Schedule :
Description of Recall Schedule : REV Ambulance Group Orlando will begin to notify dealers and customers in January or sooner.
Planned Dealer Notification Date : JAN 15, 2024 – MAR 01, 2024
Planned Owner Notification Date : JAN 22, 2024 – MAR 01, 2024 The information contained in this report was submitted pursuant to 49 CFR §573 Part 573 Safety Recall Report 23V-873
Page 3
The information contained in this report was submitted pursuant to 49 CFR §573
* NR – Not Reported
**************************************************************************************************************
OMB Control No.: 2127-0004
Part 573 Safety Recall Report 23V-873
The information contained in this report was submitted pursuant to 49 CFR §573
Manufacturer Name : Submission Date :
REV Ambulance Group Orlando, Inc. JAN 08, 2024 NHTSA Recall No. : 23V-873 Manufacturer Recall No. : NR Manufacturer Information :
Manufacturer Name : REV Ambulance Group Orlando, Inc.
Address : 2737 N. Forsyth Road
Winter Park FL 32792 Company phone : 800-628-8178 Population :
Number of potentially involved : 210 Estimated percentage with defect : 100 % Vehicle Information : Vehicle 1 : 2020-2024 REV Ambulance Group Orlan Type I, Type III, & Type IX Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES
Body Style :
Power Train : NR
Descriptive Information : REV’s Type I, Type III, and Type IX vehicles are equipped with Weldon’s Vmux 8×16 Input/Output Node and are subject to recall. Weldon provided quantities and serial numbers.
Production Dates : JAN 01, 2020 – JUN 30, 2023
VIN Range 1 : Begin : NR End : NR Not sequential Description of Defect :
Description of the Defect : In the affected products, short circuit protection may not function properly. In the case of a short circuit in the wiring or the connected load, overheating of the wiring or the load may occur.
FMVSS 1 : NR FMVSS 2 : NR
Description of the Safety Risk : Depending on how the product is installed in the vehicle, this could increase the risk of a vehicle fire.
Description of the Cause : NR
Identification of Any Warning
that can Occur :
NR
Involved Components : Part 573 Safety Recall Report 23V-873 Page 2 Component Name 1 : V-MUX 8 x 16 Input / Output Node Component Description : I
Component Part Number : 6030-2000-00 Supplier Identification : Component Manufacturer
Name : Weldon Division of Akron Brass Address : 3656 Paragon Drive
Columbus Ohio 43228
Country : United States Chronology :
REV Ambulance Gorup Orlando, Inc. (REVO) warranty department received a Technical Service Bulletin (TSB), regarding Equipment recall 23E-084. REVO was notified on December 13th, 2023. REVO conducted an inventory inspection on December 14th and determined that 235 units were affected. All units in-house (25 units) have been updated to correct the issue, per Weldon’s provided instructions. Description of Remedy :
Description of Remedy Program : If the vehicle is equipped with a V-MUX 8 x 16 Input / Output Node the end
user must perform a firmware update. Weldon will be responsible for reimbursing the facility for performing the repairs. How Remedy Component Differs from Recalled Component :
Identify How/When Recall Condition was Corrected in Production : NR On December 13th we received notification from Weldon that there was an issue with the VMUX 8 x 16 Input/Output Node. On December 14th we identified the affected population and updated the firmware for the affected components. Recall Schedule :
Description of Recall Schedule : REV Ambulance Group Orlando will begin to notify dealers and customers in January or sooner.
Planned Dealer Notification Date : JAN 15, 2024 – MAR 01, 2024
Planned Owner Notification Date : JAN 22, 2024 – MAR 01, 2024 The information contained in this report was submitted pursuant to 49 CFR §573 Part 573 Safety Recall Report 23V-873
Page 3
The information contained in this report was submitted pursuant to 49 CFR §573
* NR – Not Reported
**************************************************************************************************************
OMB Control No.: 2127-0004
Part 573 Safety Recall Report 23V-873
The information contained in this report was submitted pursuant to 49 CFR §573
Manufacturer Name : Submission Date :
REV Ambulance Group Orlando, Inc. DEC 29, 2023 NHTSA Recall No. : 23V-873 Manufacturer Recall No. : NR Manufacturer Information :
Manufacturer Name : REV Ambulance Group Orlando, Inc.
Address : 2737 N. Forsyth Road
Winter Park FL 32792 Company phone : 800-628-8178 Population :
Number of potentially involved : NR Estimated percentage with defect : NR Vehicle Information : Vehicle 1 : 2020-2024 REV Ambulance Group Orlan Type I, Type III, & Type IX Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES
Body Style :
Power Train : NR
Descriptive Information : REV’s Type I, Type III, and Type IX vehicles are equipped with Weldon’s Vmux 8×16 Input/Output Node and are subject to recall. Weldon provided quantities and serial numbers.
Production Dates : JAN 01, 2020 – JUN 30, 2023
VIN Range 1 : Begin : NR End : NR Not sequential Description of Defect :
Description of the Defect : In the affected products, short circuit protection may not function properly. In the case of a short circuit in the wiring or the connected load, overheating of the wiring or the load may occur.
FMVSS 1 : NR FMVSS 2 : NR
Description of the Safety Risk : Depending on how the product is installed in the vehicle, this could increase the risk of a vehicle fire.
Description of the Cause : NR
Identification of Any Warning
that can Occur :
NR
Involved Components : Part 573 Safety Recall Report 23V-873 Page 2 Component Name 1 : V-MUX 8 x 16 Input / Output Node Component Description : I
Component Part Number : 6030-2000-00 Supplier Identification : Component Manufacturer
Name : Weldon Division of Akron Brass Address : 3656 Paragon Drive
Columbus Ohio 43228
Country : United States Chronology :
REV Ambulance Gorup Orlando, Inc. (REVO) warranty department received a Technical Service Bulletin (TSB), regarding Equipment recall 23E-084. REVO was notified on December 13th, 2023. REVO conducted an inventory inspection on December 14th and determined that 235 units were affected. All units in-house (25 units) have been updated to correct the issue, per Weldon’s provided instructions. Description of Remedy :
Description of Remedy Program : If the vehicle is equipped with a V-MUX 8 x 16 Input / Output Node the end
user must perform a firmware update. Weldon will be responsible for reimbursing the facility for performing the repairs. How Remedy Component Differs from Recalled Component :
Identify How/When Recall Condition was Corrected in Production : NR On December 13th we received notification from Weldon that there was an issue with the VMUX 8 x 16 Input/Output Node. On December 14th we identified the affected population and updated the firmware for the affected components. Recall Schedule :
Description of Recall Schedule : REV Ambulance Group Orlando will begin to notify dealers and customers in January or sooner.
Planned Dealer Notification Date : JAN 15, 2024 – MAR 01, 2024
Planned Owner Notification Date : JAN 22, 2024 – MAR 01, 2024 The information contained in this report was submitted pursuant to 49 CFR §573 Part 573 Safety Recall Report 23V-873
Page 3
The information contained in this report was submitted pursuant to 49 CFR §573
* NR – Not Reported
**************************************************************************************************************
**************************************************************************************************************
**************************************************************************************************************
SEOCONTENT-END