CAM0000033 – Bumper Mounted Spare Tire Carrier May Detach – 2021-2023 Winnebago Micro Minnie FLX Travel Trailers

“This site contains affiliate links for which OEMDTC may be compensated”

December 22, 2023 NHTSA CAMPAIGN NUMBER: 23V891000

Bumper Mounted Spare Tire Carrier May Detach

A spare tire carrier that fails can detach from the vehicle and become a road hazard, increasing the risk of a crash.

 

NHTSA Campaign Number: 23V891

Manufacturer Winnebago Towable

Components STRUCTURE

Potential Number of Units Affected 1,313

 

Summary

Winnebago Towable (Winnebago) is recalling certain 2021-2023 Micro Minnie FLX travel trailers. The spare tire carrier may fail when loaded with a certain off-road style tire.

 

Remedy

Dealers will replace the spare tire carrier, free of charge. Owner notification letters are expected to be mailed January 19, 2024. Owners may contact Winnebago customer service at 1-574-825-5280 ext. 5220. Winnebago’s number for this recall is CAM0000033. This recall is an expansion of NHTSA recall 23V270.

 

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.

 


NHTSA: 23V-891
Transport Canada: TC2023-699
Winnebago Towable: CAM0000033

MICRO MINNIE FLX SPARE TIRE CARRIER

 

PARTS:

280085 – Replacement Spare Tire Carrier Kit

 

Tools Needed:

Torque wrench, Impact gun, 9/16” socket, 13/16” socket.

 

REPAIR INSTRUCTIONS:

Using the impact gun and 13/16” socket, remove nuts from spare tire and set tire aside. Remove the tire carrier bolts that attach it to the bumper with 9/16” socket and discard old parts EXCEPT U-BOLT.

Hold the new tire carrier into place and attach the U-bolts around the bumper and into the holes on the carrier.

Thread the U-bolt nuts onto the bolts enough to prevent the carrier from slipping but also so the carrier can still slide on the bumper.

Place spare tire onto the new carrier so that the upper lug goes through the hole and the lower one goes through the center of the rim.

Thread the tire nuts onto these bolts. Using the torque wrench, tighten the nuts to 65 ft-lbs.

Adjust carrier location as to not block taillights or license plate.

Once location is set, tighten the U-bolt nuts to 20 ft-lbs.

 

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [151.38 KB]

 


Chronology :

In March, a VOQ inquiry from NHTSA stated a customer had experienced a failure on their bumper mounted spare tire carrier. An investigation was subsequently opened.

Winnebago identified a total of 21 spare tire carrier mount issues, with 12 of those issues resulting in total detachment. The first known issue occurred in September, 2020. There are no known accidents or injuries related to this issue.After completing a data analysis and technical investigation, the Product Safety Committee met on 4/10/2023 to review the findings of the investigation and determined that a defect related to motor vehicle safety was present.

In late December a Winnebago dealer notified the company that a Micro Minnie FLX model did not appear to be impacted by recall 23V270. After a brief investigation, it was determined that this model series was inadvertently missed in the data pull as it was thought to be included in the Micro Minnie model series.

Winnebago is not aware of any additional failures on the Micro Minnie FLX.

 


Bumper Mounted Spare Tire Carrier May Detach – 2021-2023 Winnebago Micro Minnie Travel Trailers

 

Bumper Mounted Spare Tire Carrier May Detach – 2021-2023 Winnebago Micro Minnie Travel Trailers

 


3 Affected Products

Vehicle

MAKE MODEL YEAR
WINNEBAGO MICRO MINNIE FLX 2021-2023

 


4 Associated Documents

Defect Notice 573 Report

RCLRPT-23V891-4670.PDF 214.057KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [209.04 KB]

 


Recall Acknowledgement

RCAK-23V891-5958.pdf 678.226KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [662.33 KB]

 


Manufacturer Notices(to Dealers,etc)

RCMN-23V891-9301.pdf 212.699KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [207.71 KB]

 


Remedy Instructions and TSB

RCRIT-23V891-6232.pdf 155.018KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [151.38 KB]

 


Latest Recalls Documents

For the Latest and Most recent Recall Information Visit the link below…

https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=23V891&docType=RCL

 


 

Bestseller No. 1
GADFISH Spare Tire Carrier,Spare Tire Mount Boat Trailer Carrier Bracket,Heavy Duty Lock Holder,Fits 4 & 5 & 6 Lugs Trailer Wheels on 4", 4.5'', 4.75'', 5'' and 5.5'' Bolt Patterns,Holds up to 150 Lbs
  • 【150 LBS HEAVY DUTY】This spare tire bracket is reinforced with an upgraded triangular structure welded together, with a sturdy rectangular behind plate that holds the steel beam firmly in place and holds up to 150 Lbs.
  • 【WIDE APPLICABILITY】Our spare tire carrier compatible with 4 lug X 4" diameter hole pattern, 5 lug X 4.5"/4.75“/5” diameter hole pattern, and 6 lug X 5.5" diameter hole pattern. Because of its universal compatibility, it is also suitable for boat trailers.
  • 【Robust Construction】Once the screws are tightened, your spare tire mount will no longer have the risk of losing a tire. The industrial solid iron and sandblasting process gives it a durable, smooth and attractive surface so you don't have to have bumpy roads.
  • 【EASY TO INSTALL】Features a sloping and raised design concept to reduce wind resistance and low clearance to the ground, firmly lock the tire. Different length bolts, no drilling required, just need a wrench, make installation and removal a breeze and you can choose the height of the steel beam yourself.
  • 【WORRY-FREE VOUCHSAFING】GADFISH Spare tire carriers comes with 18 months of support and are rigorously tested before shipment. Please feel free to contact us if you have any questions regarding Carrier installation. We will definitely give you a satisfying solution.
Bestseller No. 2
MaxxHaul 50214 Spare Tire Carrier for Utility Trailer Tires
  • Holds 4-lug (4 on 4" bolt pattern) and 5-lug (5 on 4-1/2" bolt pattern) trailer wheels and not compatible with 5 on 4-3/4" or 5 on 5" bolt pattern
  • Mounts on trailer tongues up to 3 inch wide and 5 inch high
  • Angled and raised mount design makes this ideal for boat trailers as well
  • Durable powder coat finish to resist rust and corrosion
  • Zinc plated mounting hardware
Bestseller No. 3
DIYIIRON Wall Mount Spare Tire Carrier for Trailer,Spare Tire Carrier Bracket for Enclosed Trailer,Universal Wheel Bracket Trailer Spare Tire Mount,Fits Most Tire
  • 【Function】The wall mount spare tire carrier is used to mount to the wall of the trailer to hold the spare tire,easy to install and fits most spare trailer tires
  • 【Tough Construction】Made of heavy-duty steel, stronger and will not wobble;with a galvanized surface,which is heat and corrosion resistant,and hold max load up to 120 lbs
  • 【New Design】The trailer tire carrier bracket equipped with two lengths of bolts to fit different size tires.The fixed plate is widened to 2.4 inches,making the bracket more secure and not easy to loose.The wing nut can better lock the tire, prevent it from falling off, and be easy to remove
  • 【Easy to Install】The spare tire carrier is easy to install and remove, no need to buy other accessories, you can install according to our picture.When not in use, you can easily remove the bolt,save your space and keep tidy.
  • 【Package Include】Carrier Bracket*1, 6inch long bolt*1, 4.5inch short bolt*1, screws*4, washers*2, hexagon nut*1, wing nut*1,locking nut*1
Bestseller No. 4
VONLX U-Bolt Spare Tire Carrier Holder Bracket for Trailer Side Mount 4 or 5 Lug Zinc Plated Fit for Ski Boat, Fishing Boat or Sailboat Trailer
  • [Specification] U-bolt tire carrier bracket fits trailer frames up to 2" or 3" wide (up to 4" high) and up to 15" tires. For 4 or 5 lug wheels (bolt style: 4 to 4 or 5 to 4 -1/2).
  • [High Quality Material] U-bolt trailer spare tire mount is made of 8.8 grade thick steel, which can bear heavy objects and resist deformation. The galvanized coating on the surface is durable and rust-proof, and it is not afraid of bad weather.
  • [Easy to Install] This spare tire holder can be easily installed to secure the tire. Just put the bolts into the throat of the trailer and tighten. The spare tire is mounted on the side of the trailer protector.
  • [Function] U-bolt spare tire bracket for trailer is a simple solution for hauling spare trailer tires.
  • [Package includes] 1 x U-bolt and 2 x lug nuts.
Bestseller No. 5
Extreme Max 3004.4553 Economy Spare Tire Carrier
  • Heavy-duty, welded, reinforced zinc-plated steel construction
  • Fits 4 hole rims with 4" bolt circle patterns and 5 hole rims with 4.5" bolt circles
  • Designed for front or mid-trailer mounting
  • Easy-to-install bolt-on design - No cutting or drilling
  • All mounting hardware included - Two-year replacement warranty
Bestseller No. 6
Spare Tire Carrier Zinc Plated U-Bolt Holder Bracket Side Mount for 4 or 5 Lug
  • Fitness: Fits trailer frames up to 2" or 3" wide (up to 4" tall), fits up to 15" tires;For 4 or 5 lug wheels (bolt pattern: 4 on 4 or 5 on 4-1/2)
  • Package:1 Premium Spare Tire Carrier U-Bolt Bracket with nuts;
  • Spare tire is mounted along side of trailer (to prevent damage);
Bestseller No. 7
AUTODUNK Spare Tire Mount Bracket for Trailer, 120LBS Weight Capacity, Fits Most 4 & 5 Lugs Wheels on 3.94″, 4″, 4.25″ and 4.72″ Bolt Patterns
  • AUTODUNK Trailer Spare Tire Carrier is fit for trailer tongues to 2.95″wide and 3.94″ high, To hold 4-lug and 5-lug wheels with 3.94″, 4″, 4.25″ and 4.72″ bolt patterns
  • Designed to hold max load up to 120 lbs, and galvanized material is rust and corrosion
  • The bolt-on installation and removal is easy. No drilling is required for installation. We come with detailed installation instructions
  • The close-to-trailer design helps reduce wind resistance. Features raised design that moves the wheel up for increased ground clearance
  • Package includes zinc plated mounting hardware, you don’t have to buy bolts and nuts separate. AUTODUNK worry-free 18-month warranty and friendly customer service
Bestseller No. 8
VEVOR Spare Tire Carrier, Trailer Spare Tire Mount, 160 lbs Capacity, Utility Trailer Accessories Fits Most 4 & 5 & 6 & 8 Lugs Wheels on 4", 4.25", 4.5", 4.75", 5", 5.5", 6", 6.5" Bolt Patterns
  • Versatile and Application-Friendly: This trailer spare tire carrier is designed to fit a wide range of wheel sizes, making it suitable for various applications. It is compatible with 4x4", 5x4.25", 5x4.5", 5x4.75", 5x5", 5x5.5", 6x5.5", 6x6", and 8x6.5" diameter hole types.
  • Quick and Effortless Installation: Installing this spare tire mount is a breeze. You'll only need one wrench, and there's no drilling required. The spare trailer tire mount adopts a bolt inclined fixed protrusion design, which firmly locks your tire, reduces wind resistance and keeps away from the ground clearance.
  • Double-sided Stiffeners: The trailer tire mount is made of high-quality wrought iron, and the solid structural design can withstand up to 160 pounds. With a durable black powder coating finish, this trailer spare tire mount is specifically designed to resist rust and corrosion, and is the best choice for outdoor use.
  • Completed Accessories: Say goodbye to the hassle of searching for separate mounting hardware. This spare tire carrier comes with galvanized mounting hardware included in the package. Knowing that all the necessary components are provided for a seamless installation experience, you can have peace of mind.
  • Perfect Compatibility: Designed specifically for trailer tongues, including marine trailers, this trailer tire mount is engineered to fit perfectly. You can be confident that it will securely accommodate your spare tire, ensuring a snug fit for your trailer.
Bestseller No. 9
Extreme Max 3005.3732 Universal Easy-Mount Wall Mount Spare Tire Carrier for Enclosed Trailers - Includes Two Bolts Sizes for Custom Fit Compatibility
  • Universal fit for most spare trailer tires
  • Holds tire tight and flush against the inside wall of an enclosed trailer
  • Aluminum-constructed bracket with zinc-plated steel bolts
  • Contains two bolt lengths, 4" and 6", featuring an American 1/2" x 13 full thread
  • Two-year warranty
SaleBestseller No. 10
Foozet Spare Tire Mount for Trailer, Spare Tire Carrier, 120 LBS Weight Capacity Heavy-Duty Spare Tire Carrier Compatible with 4 & 5 & 6 Lugs Wheels on 4", 4.5'', 4.75'', 5" or 5.5" Hole Patterns
  • TRAILER SPARE TIRE MOUNT - Trailer Accessories Compatible with 4 lug X 4" diameter hole pattern, 5 lug X 4.5"/4.75“/5” diameter hole pattern, and 6 lug X 5.5" diameter hole pattern.
  • TRAILER COMPATIBILITY - This spare tire carrier is designed to fit trailer tongues, including boat trailers’, to 1.5 to 3.5"wide and 2 to 4" high.
  • HEAVY DUTY CONSTRUCTION - This trailer spare tire mount with thick galvanized steel. The extra heavy duty welded steel construction for worry free trailering.Also very sturdy not likely to fall apart
  • OPTIMIZED DESIGN : 1 - This spare tire carrier with Double-nut prevent one of them from loosing,no fear of losing the tire on the road. 2 - First Spring-sheet lock the Carriage screw and bracket ,and then install the tires. You can easily install the cone nuts fixing the tire.
  • HARDWARE ATTACHMENT - For this spare tire bracket of trailer, you can choose different lengths of screws according to the size of the steel beam of your frame.

Last update on 2024-04-12 / Affiliate links / Images from Amazon Product Advertising API

This product presentation was made with AAWP plugin.

 


Leave a Comment

Share to...