| “This site contains affiliate links for which OEMDTC may be compensated” |
NHTSA Campaign Number: 18E080
Manufacturer TRW Automotive Inc
Components STEERING
Potential Number of Units Affected 1,999
A loss of steering can increase the risk of a crash.
Summary
TRW Automotive Inc (TRW) is recalling certain Outer Tie Rods, part number JTE7042, sold as replacement parts for certain 1988-2000 General Motors vehicles. The locking nut on these outer tie rod assemblies may not lock as designed, allowing the tie rod to separate and cause a loss of steering.
Remedy
TRW will notify their distributors and the known owners, and will refund the owners for the returned parts, free of charge. The manufacturer has not yet provided a notification schedule. Owners may contact TRW customer service at 1-248-863-2437.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Recall Acknowledgement
September 7, 2018
https://static.nhtsa.gov/odi/rcl/2018/RCAK-18E080-1996.pdf
Loading...
Reload document 
Open in new tab
| “This site contains affiliate links for which OEMDTC may be compensated” |
Bestseller No. 1
Orion Motor Tech Gear Puller Set, 3" 4" 6" 8" 3 Jaw Puller Kit for Pulley Gear Bearing Flywheel Removal, Heavy Duty Pulley Puller with Reversible Jaws 4 pcs Bearing Puller Tool Kit
- UNIVERSAL REMOVAL TOOLS: This 3 jaw puller set by Orion Motor Tech fits your wrench or ratchet to work as a gear puller, bearing puller, crank pulley puller, flywheel puller and more, letting you easily handle worn or broken parts
- BETTER TOGETHER: Our bearing puller set includes four puller sizes, offering maximum spreads of 3", 4", 6", and 8" and reaches of 4.3", 5", 7.3", and 9.2" to cover most applications
- 3 JAW DESIGN: These power steering pulley pullers bite tightly onto your components with their reinforced jaws and distribute even pulling force to remove parts without causing damage
- REVERSIBLE JAWS: Each pulley removal tool can be reversed to pull parts from either the inside or outside, with the 6" and 8" gear puller provide 4 configurations for a sure grip thanks to their dual fixing holes
- TOOLS FOR MECHANICS: Drop-forged and heat-treated carbon steel builds with corrosion proof coatings ensure these pullers last for resilient service with unrivaled strength and durability
Bestseller No. 2
Thorstone 46pcs Harmonic Balancer Puller Set, Steering Wheel Flywheel Crankshaft Pulley Puller
- 🚖MULTIFUNCTION - Allowing unit to be used with harmonic balancer, flywheel, crankshaft, steering wheel, pulley and other two or three hole applications.
- 🚖HIGH-QUALITY - All components are crafted from heat treated carbon steel with oxide finishes, helping the tool withstand tough pulling jobs and resist rust.
- 🚖COMPATILIBIYTY - Includes 30 different bolts and a four-yoke slot, can handle a range of jobs on most cars, trucks, SUVs and small engine vehicles.
- 🚖PACKAGE - Comes with a heavy duty blow molded carrying case, for easy transportation, safe storage and quick organization.
- 🚖100% SALE SUPPORT -We back up all products for life, 24*7 fast response customer service free all your concerns. Sincerely thanks for your support to Thorstone!
Bestseller No. 3
MANNIFEN CR-V Single Hook Two Claws Puller Separate Lifting Device.TAO+ Stores Offer 4 Different Sizes of jaw Puller for You to Choose to Deal with
- High quality material - The 2 jaw bearing puller is made of forged chrome vanadium steel material. It has high hardness . Heat treatment process makes it more good.TAO+stores offer 4 different sizes of jaw puller for you to choose to deal with different parts (small, medium and large): 4 inches, 6 inches, 8 inches, 10 inches, please choose the appropriate model when purchasing.
- Convenient Adjustment - The 2 jaw gear puller can adjust the clamping depth and working space,Suitable for most different sizes of gears and bearings.,design makes it easy to grasp the gears and bearings and pull them out.
- Specification - The screw length of the two jaws puller is 6.5 inches/165mm,Bracket Length:6 inches/ 150mm（The top end of the bracket 2 has anti-dropout pins, and the 2-Jaw Gear Puller actually uses a gear maximum of 5.3 inches）,Screw Diameter (top): 14mm,Screw Diameter (bottom): 14mm,Total length of claw:5.6inches/140mm（The actual length used after installing the bracket on the claw is 3.8 inches/97mm）,Claw Thickness:5mm, For more size description please see size picture and video.
- Wide application - The two jaws bearing remover is widely used in various bearings that are not easy to disassemble. 2-jaw separator tool for removal of stuck or small tolerance pulleys, gears, bearings and more without damage them.
- High quality after-sales service - Customers’ feedback always matters. The goal of our MANNIFEN brand is to make you satisfied with buying. If you’re not 100% content with our 6 inch two claws gear puller, please feel free to contact us. We'll try our best to provide you with a satisfactory solution.
SaleBestseller No. 4
Bearing Puller Set, 5 Ton Capacity Bearing Separator, Pinion Wheel Bearing Removal Kit with 2" and 3" Jaws, Wheel Hub Axle Puller Set, Heavy Duty Bearing Splitter Tool Kit with Blue Case
- VERSATILE BEARING PULLER: This Orion Motor Tech bearing puller set enables you to complete a wide range of pulling jobs, ideal for removing large or small bearings on front and rear wheel hub axle shafts, as well as gears, pulleys, and steering wheels
- ALL-IN-ONE TOOL KIT: Our bearing separator set includes a 3" bearing separator jaw, 2" bearing separator jaw, 6" yoke, 6-1/4" forcing screw, four 4" extension screws, four 5" extension screws, and two 4-1/2" L-type legs
- WIDE APPLICATION: The 2 bearing splitter jaws’ 5 ton capacity ensures they stand up to punishing use; suitable for professionals and home mechanics and compatible with most vehicles, ATVs, and light trucks
- EFFECTIVE OPERATION: The knife like taper feature allows the jaws to get behind bearings to securely grip any bearing; the included tools enable you to reach and remove bearings in tight spaces effectively
- DURABLE CONSTRUCTION: Constructed from heat treated Cr-V steel with black oxide finish, this pinion bearing puller set ensures corrosion resistance and long-term durability under even punishing use
SaleBestseller No. 5
Orion Motor Tech OMT 5-in-1 Ball Joint Separator, Pitman Arm Puller, Tie Rod End Tool Set for Front End Service, Splitter Removal Kit (RD06)
- ALL IN ONE FRONT END SERVICE KIT: Containing 5 adjustable tools for a wide range of domestic and import vehicles. Comes with 1x Ball Joint Separator, 1x Tie Rod and Ball Joint Remover, 1x Conical Pitman Arm Puller, 1x Pitman Arm and Tie Rod End Puller, 1x Pitman Arm Puller, 1x well-organized ABS case.
- HARDENED ALLOY CONSTRUCTION: Extraordinarily tough and durable alloy means these tools can stand up to the toughest jobs. This front end service tool kit can remove the most stubborn ball joints, tie rod ends, and pitman arms.
- UNIVERSALLY COMPATIBLE WITH A WIDE RANGE OF VEHICLES: The versatile design allows this tool to be used as a pitman arm remover, ball joint separator, or tie rod end puller for many small, domestic rear-wheel-drive vehicles, import vehicles, and light trucks.
- PROFESSIONAL PORTABLE ABS CASE: The custom-molded case is crafted from high-quality ABS hard plastic for the amateur or professional mechanic on the go. Conveniently keeps all your tools in one organized and secure place. Never miss out on a job or project from a misplaced tool.
- ORION MOTOR TECH PROMISE: If any issues from our tools arise please don’t hesitate to contact us. We guarantee the quality of our tools and want to ensure you’re only getting the best. Because to do perform your best, you deserve the best, that’s our Orion Motor Tech Promise.
SaleBestseller No. 6
OTUAYAUTO Battery Terminal and Wiper Arm Puller
- This Puller designed for professionally dual-purpose use
- Easy and safely to remove the stuck on the rear wiper arm
- Use to remove battery terminal clamp without damage to cause battery post
- Jaw opening: 1/16" - 1-1/16" (6-28mm); Outer diameter:1-7/8" (48mm)
- Tighten knurled cone to force jaws under the cable clamp. Also removes bolted on windshield wiper arms that fit over a tapered spline
Bestseller No. 7
Harmonic Balancer Puller Set, 46 Pcs Flywheel Steering Wheel Puller Kit Gear Puller Yoke Crankshaft Pulley Puller
- Kit features four yoke slots allowing unit to be used for two or three-hole applications
- 30 Different size bolts included
- The floating swivel prevents damage to the shaft ends
- Yoke is heat-treated alloy steel for strength and durability
- Set includes yoke, pressure screw, and pulling screws in a molded storage case
Bestseller No. 8
MOFEEZ 3" 4" 6" 3 Jaw Gear Bearing Puller Removal Tool for Slide Gears, Pulley, and Flywheel (Silver)
- DAMAGE-FREE REMOVAL: This Mofeez 3 jaw puller removal tool makes removal side gear puller, sprocket puller, bearing puller, pulley puller, flywheel puller and more simple and damage-free. It can be worked with your wrench, ratchet, or spanner.
- BUILT TO LAST: All parts are made with premium carbon steel for maximum strength. The jaws are galvanized to provide superior corrosion resistance and long service life.
- 3 OR 6 POSITION DESIGN: The universal and reversible jaws offer versatile inside or outside grip along with short or long reach; The 3-inch and 4-inch gear puller has 3 positions and the 6-inch gear pullers have 6 positions.
- PACKAGE CONTENTS: Included is a 3-inch gear puller with a 4.5-inch jaw spread and 1.5-inch jaw reach, 4-inch gear puller with a 6.25-inch jaw spread and 2.5-inch jaw reach, and a 6-inch gear puller with a 8.75-inch jaw spread and 4.75-inch jaw reach.
SaleBestseller No. 9
GEARWRENCH 2 or 3 Jaw Internal/External Ratcheting Puller Set, 2 and 5 Ton - 3627
- Ratcheting pullers have a time-saving, indexing jaw design
- Legs index into position and stay in place, letting you easily support the puller and quickly connect each jaw one at a time to the pulley without help
- Pullers can also be converted to two- and three-leg pullers
Bestseller No. 10
GEARWRENCH 2 or 3 Jaw Internal/External Ratcheting Short/Long Leg Puller, 5 Ton - 3628D
- Since our 1919 beginning, KD Tools has been driven by innovation.
- From our first specialty tool, the Model-T valve spring lifter, to our latest Ratcheting Puller, we've built our reputation with tools that make tough jobs easy.
- That's why we are the first choice for thousands of automotive technicians worldwide.
Last update on 2024-06-13 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.