“This site contains affiliate links for which OEMDTC may be compensated” |
September 25, 2023 NHTSA CAMPAIGN NUMBER: 23E070000
Tire Sidewall Separation/FMVSS 119
A loss of tire pressure increases the risk of a crash.
NHTSA Campaign Number: 23E070
Manufacturer Dexter Axle Company
Components TIRES
Potential Number of Units Affected 19,808
Summary
Dexter Axle Company (Dexter Axle) is recalling certain Goodride ST 200 tire and wheel assemblies with size: ST235/80R16 LRE tires. The sidewall of the tires may experience bubbling and separate, causing loss of tire pressure. As such, these tires and wheel assemblies fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 119, “New Pneumatic Tires-Other Than Passenger Cars.”
Remedy
Dealers will inspect and replace the tires as necessary, free of charge. Owner notification letters were mailed in October 14, 2023. Owners may contact Dexter Axle customer service at 1-574-295-7888.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Goodride ST200 ST235/80R16 LRE Inspection and Replacement
PURPOSE:
Recall Inspection and Replacement Instructions of certain Goodride ST200 ST235/80R16 LOAD RANGE E tires.
RECALL REMEDY PROCESS:
Using the attached Goodride Tire Recall Form, record all necessary information in order to complete the remedy.
MATERIALS: Torque Wrench with Readable Output or Clicker Style; 3/4 Deep well Socket; Socket Extension; Impact Gun and / or Breaker Bar; Equipment for lifting and securing the trailer (See Trailer Mfg. Instructions), as well as Tire Mounting/Dismounting Equipment. Safety Equipment Including, but not limited to, Safety Glasses, Gloves and Steel-Toed Shoes.
Chronology :
29-August: First indication of failure modes noted mid-afternoon in Cooper, TX stock
30-August: Customer ATW (Big Tex) rejected a total of 760 tire/wheel assemblies due to visual delamination
31-August: Initiated stock sorting at internal assembly operartions in Cooper, TX
1-Sept: Identified suspect stock date range and contacted ZC Rubber (tire manufacturer)
1-Sept: Quartined all tires within the suspect date range (week 16-week 25)
1-Sept: Initiated testing of suspect tires
12-Sept: Evalute testing results with reference to FMVSS standards and determined a potential safety noncompliance
1 Affected Product
Tire
BRAND | TIRE LINE/SIZE | PRODUCTION DATES |
---|---|---|
GOODRIDE | ST 200/ST235/80R16 LRE |
3 Associated Documents
Recall Acknowledgement
RCAK-23E070-9066.pdf 646.686KB
Noncompliance Notice 573 Report
RCLRPT-23E070-5466.PDF 214.086KB
Remedy Instructions and TSB
RCRIT-23E070-8460.pdf 1241.795KB
Latest Recalls Documents
For the Latest and Most recent Recall Information Visit the link below…
https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=23E070&docType=RCL
- Set of 4 New Premium Radial Trailer Tires 225/75R15 10PR, Brand: FREE COUNTRY
- Full cap ply ( nylon overlay cross entire tread area), significant upgrade from most other products on the market have nylon strips on shoulder area only, add the critical safety feature!
- Featured "Scuff Guard" ring on tire wall for better tire side protection
- 8 mm deep tread depth vs 5.6 mm of other cheap competitors, durable and longer mileage life
- Heavy duty 10 ply rated, load range E. Steel belted, speed rating M----up to 81mph.
- Tire Size: 205/75D15 Load Range: C
- Tire Weight Rating: 1820 Lbs. Max. Pressure: 50 PSI
- Bolt Configuration: 5 Lug 4.5" Center - See diagram for fitment
- Top Quality Tire - 2 year limited warranty with free roadside assistance
- Reinforced square shoulder tread for optimum road contact, with variable tread pitch for reduced road noise
- Tire Size: 175/80D13 Load Range: C
- Tire Weight Rating: 1360 Lbs. Max. Pressure: 50 PSI
- Bolt Configuration: 5 Lug 4.5" Center - See diagram for fitment
- Top Quality Tire - 2 year limited warranty with free roadside assistance
- Reinforced square shoulder tread for optimum road contact, with variable tread pitch for reduced road noise
- 2 new premium full nylon cap ply 8PR ST205/75R15 Radial trailer tires, brand: FREE COUNTRY
- Full nylon cap ply ( nylon overlay cross entire tread area), significant upgrade from most other products on the market have nylon strips on shoulder area only, add the critical safety feature!
- Featured "Scuff Guard" ring on tire wall for better tire side protection
- 8 mm deep tread depth vs 5.6 mm of other cheap competitors, durable and longer mileage life
- Steel belted 8 ply rated, load range D, Speed rating M---up to 81mph,
- Tire Size: ST205/75R15 205/75R15 205 75R15, Max Capacity: 2150 pounds; Maximum PSI: 65; Rim Diameter: 15"; Rim Width: 5.5" ;Load Range: D= 8 Ply Construction
- This Radial ply tire is constructed with double steel belts and double polyester cords for increased durability,and shoulder design provides better heat dissipation resulting in longer tread life and even wear
- Nylon cap ply ( A protective layer of nylon is wrapped around entire tread area), to help prevent tread separation.
- This tire uses radial construction,Created specifically for trailers - not intended for use on other vehicles.
- Rim(s) NOT included !Refer to your existing tire sidewall and/or trailer owner's manual to determine the appropriate tire size and load capacity for your application.
- Tire only, Rim not included
- Improved tread wear
- Greater heat resistance
- Increased durability
- Fit Type: Vehicle Specific
- Tire Size: 175/80D13 Load Range: C
- Tire Weight Rating: 1360 Lbs. Max. Pressure: 50 PSI
- Bolt Configuration: 5 Lug 4.5" Center - See diagram for fitment
- Top Quality Tire - 2 year limited warranty with free roadside assistance
- Reinforced square shoulder tread for optimum road contact, with variable tread pitch for reduced road noise
- Tire Size: ST175/80D13; Ply Rated: 6; Load Range: C
- Speed Range: J; Max Load: 1360 LBS
- Overall Diameter OD : 24“ ; Section Width SW: 177mm
- Aspect Ratio: 80mm ; Rim Dameter: 13“
- Tread Depth: 6.5mm
Last update on 2024-04-12 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.
SEOCONTENT-START
DEXTER WORK INSTRUCTION
Procedure Goodride ST200 ST235/80R16 LRE
Inspection and Replacement
October 16, 2023
Applies to: Service Technicians / Dealers / End Users Page 1 of 6
PURPOSE:
Recall Inspection and Replacement Instructions of certain Goodride ST200 ST235/80R16 LOAD
RANGE E tires.
COVERED TIRES:
Brand Model Size Plant ID Size Code Opt. Code Affected Date Codes
MR ST200 ST235/80R16 LRE 1JU MR 2A2T 1623 2523
RECALL REMEDY PROCESS:
Using the attached Goodride Tire Recall Form, record all necessary information in order to complete the remedy.
MATERIALS: Torque Wrench with Readable Output or Clicker Style; 3/4 Deep well Socket; Socket
Extension; Impact Gun and / or Breaker Bar; Equipment for lifting and securing the trailer (See Trailer Mfg.
Instructions), as well as Tire Mounting/Dismounting Equipment. Safety Equipment Including, but not limited to,
Safety Glasses, Gloves and Steel-Toed Shoes.
PROCEDURE:
Following each instruction below is essential to comply with federal law and good safety practices.
Inspection Identification of Covered Product
1. Record trailer information (make, model, etc.) on
the Goodride Tire Recall Form. Be sure to include
the Vehicle Identification Number (VIN) of trailer
fitted with Goodride ST200 ST235/80R16 LRE
tires.
Note:
number (Left/Front section of trailer).
“, 13/16″, 7/8”
&CAUTION
Do not 11ft or support. the trailer on any p,art of the ,axle or suspension
sys.tern. Never· go under any trailer unless it is p,r:operly .supported on
Jack stands which have been rated for the load. Improperly .supported
vehicles can fall unexpectedly and c.ause ser1ous Injury o-r· death ..
–
MANUFACTURED BYIFABRIQU~ PAR: – DATE: tw:lC<
GVWRJPNBV 7620 KG (16800 LBJ
GAWR (EACH AXLE~PNBEjCHAQUE ESSIEU) 3175 KG (7000 LB)
UVW 6290 KG(13888 lB)
TIREJPNEU ST235185R16, lRG RIMS/JANTE16, SJ, 8 x 6.5
COlO INFL. PRESS/PRESS, OE GONFL A FROID758 KPA( 110 PSIILPC)-SINGLE
IM6l!l1Elf t\’IIJORMI TOllWPLl:Ull Ul FEDERAi IDTOR l!ll[LE IU!l!STAIOIRDI ~ lfTECT OHTII! DATE OFIWIUfAC!I.I!!
lll-Oll!il80il TH6 ra!tlE COHFOll.MI IQILLIPPLCl.i1! SIINOlRDS IIIEICRll!OIA’DIR 111E tlNIIIJN IDTOR l’Elll:1£ I.IFIT!
REQU.111111 ~ El’fm Cll !HEOITE OF IIIJIUIICTIIRt • CE lOIEULE m CONFORl!l l TMULElNORIESOIII ~lQNT !JPLltllLES
ENY!llTIJ OIi-“‘~”· -~ ‘. ·””‘RI!! omaW.USAUTOID8l!$ OlJCAHIDJ EN \’ICU!lU LI.Ol!E orn FUiEATllli
~ LN.IN.L.V,: ~DXrY7’!ljvPE: TRAILER TR.A/REM : Fifth Wheel
See manufacturer’s certification label for VIN [~== :1 ~
DEXTER WORK INSTRUCTION
Procedure Goodride ST200 ST235/80R16 LRE
Inspection and Replacement
October 16, 2023
Applies to: Service Technicians / Dealers / End Users Page 2 of 6
2. Verify the following for each tire installed on the
trailer (including the Spare):
a. Tire Brand: Goodride
b. Tire Model: ST200
c. Tire Size: ST235/80R16
d. Load Range: E
e. Country of Origin: China
f. Date Code: 1623 2523
Note:
may differ for each tire installed on a trailer. Please
be sure to check each tire to verify the information above.
Tires MADE IN THAILAND are not covered in this recall.
3.
TIN’s
For replacement of recalled tires, please contact
Dexter at (866) 875-4951 or by email at:
goodriderecall@dextergroup.com.
Date Code
DEXTER WORK INSTRUCTION
Procedure Goodride ST200 ST235/80R16 LRE
Inspection and Replacement
October 16, 2023
Applies to: Service Technicians / Dealers / End Users Page 3 of 6
Remove and Replace the Tire and Wheel Assembly:
1. Please refer to and follow the Trailer
removal and
installation of the wheel/tire assembly.
2. Raise and support the trailer (or loose axle).
Instructions.
IMPORTANT! Securing the Trailer is a Safety Critical
Part of this Operation. Failure to result in following
Trailer Manufacturer Instructions Could Lead to Sever
Injury or Death.
3. Remove the wheel nuts with an impact wrench or
breaker bar and socket and remove the tire &
wheel.
4.
IMPORTANT! Tire Mounting and Dismounting can be
dangerous and should qualified technicians using
proper procedures and tools.
5. Mount and inflate the replacement tire on the
original equipment wheel.
Inflate tire to the Trailer Manufacturers
recommended Cold Tire Inflation Pressure or to
maximum of 550 kPa (80 psi).
Note:
Manufacturer’s instructions for
Secure trailer according to Trailer Manufacturer’s
Each recalled tire is to be dismounted, promptly
and permanently altered and made unsuitable for
resale to prevent the tires from being used on a
motor vehicle. See the Destruction and Disposal
Section below for more detail.
Note:
Alteration of the recalled tires required per 49
U.S.C. Chapter 301 and 49 CFR Part 573.
Recommend mounting the tire with the “Date
Code” on the outboard side.
DEXTER WORK INSTRUCTION
Procedure Goodride ST200 ST235/80R16 LRE
Inspection and Replacement
October 16, 2023
Applies to: Service Technicians / Dealers / End Users Page 4 of 6
6. Reinstall Wheel/Tire Assembly which has been
fitted with a replacement tire on the wheel hub,
using the existing wheel nuts and accessories
(center caps, trim rings, etc.)
Note:
Do not exceed the Trailer Mfg. recommend lug
nut torque.
Always hand start wheel nuts.
Seat the wheel nuts before lowering trailer.
Do not use an impact wrench to tighten wheel
nuts.
7.
8.
•
•
•
•
Remove Jack Stand, Lower trailer, and Torque
wheel (lug) nuts per the Trailer Manufactures
Instructions.
In leu of instructions, Wheel Hardware should be
tightened in multiple stages (as shown below)
using a star pattern:
For 1/2″ Studs:
1st Stage ➔ 45 ft*lbs (60 Nm)
2nd Stage ➔ 70 ft*lbs (95 Nm)
3rd Stage ➔ 100 ft*lbs (136 Nm)
For 9/16″ Studs:
1st Stage ➔ 45 ft*lbs (60 Nm)
2nd Stage ➔ 80 ft*lbs (110 Nm)
3rd Stage ➔ 130 ft*lbs (176 Nm)
Upon completion of the service, the following
information should be submitted back to Dexter for
the claim to be processed: the Goodride Tire Recall
Form, Service Invoice, and a single photo
containing all recalled tires to
goodriderecall@dextergroup.com.
6 Lug Bolt
Pattern
-0
8 Lug Bolt
Pattern
DEXTER WORK INSTRUCTION
Procedure Goodride ST200 ST235/80R16 LRE
Inspection and Replacement
October 16, 2023
Applies to: Service Technicians / Dealers / End Users Page 5 of 6
Destruction and Disposal:
9. To prevent future use of recalled tires, the tires
must permanently altered to prevent the tires from
being used on vehicles.
Preferred Method:
Drill a minimum of 3 holes through the sidewall to
twist
type drill bit or hole saw.
Optional Method:
Cut completely through the sidewall from the bead
area to the tread, just to the right of the TIN.
If any removed tires are not promptly and
permanently altered and made unsuitable for
resale for any reason, you must immediately
contact Dexter at (866) 875-4951 or via email:
goodriderecall@dextergroup.com, and explain the
number of tires that were not disabled and the
reason they were not disabled.
Preferred Method:
Optional Method:
TIN
right of the Tl N, using a 3/8″ or larger diameter TIN
DEXTER WORK INSTRUCTION
Procedure Goodride ST200 ST235/80R16 LRE
Inspection and Replacement
October 16, 2023
Applies to: Service Technicians / Dealers / End Users Page 6 of 6
10.
IMPORTANT! Federal law bans the sale of new or
used noncompliant tires (49 CFR 573.11); (49 CFR
573.12); and any seller is under a duty to notify
NHTSA if it learns of any sale of a new or used
recalled tire for use on a motor vehicle (49 CFR
573.10).
Whenever possible, removed tires under the recall
should be properly disposed in a way minimize the
environmental impact (shredding, crumbling,
recycling, and recovery) or another alternative
beneficial non-vehicular use, and the disposal of
recalled tires in landfills should be limited to only
when necessary.
For more information regarding proper disposal
please contact Dexter at (866) 875-4951 or via
email: goodriderecall@dextergroup.com.
Otherwise, recalled tires can be disposed of, at a
location of the Service Center’s choosing, provided
the methods comply with applicable state and local
laws and regulations regarding disposal of tires.
GOODRIDE TIRE RECALL FORM
Date: _________
Repair Center: ______________________________________________________
Customer name: _____________________________________________________
Address: __________________________________________________________
__________________________________________________________________
City State Zip Code
Contact Phone #: ______________________________
Email: ________________________________________
Ship to address: Check if same as above.
Name: _______________________________________
Address: __________________________________________________________
__________________________________________________________________
City State Zip Code
Unit
Information: ______________________________________________________ _
Make Model Manufacturer
VIN#: _______________________________ Date of Purchase: ______________
(Last 8 Digits)
Size & Brand of Tire(s): _______________________________________________
# of Recall Tires: _______________
Tire #1 Identification number: (TIN) _____________________________________
Tire #2 Identification number: (TIN) _____________________________________
Tire #3 Identification number: (TIN) _____________________________________
Tire #4 Identification number: (TIN) _____________________________________
Tire #5 Identification number: (TIN) _____________________________________
Tire #6 Identification number: (TIN) _____________________________________
□
2900 Industrial Parkway E • Elkhart, IN 46515 • Phone: 574-295-7888 • www.dexterqroup.com
A DEXKO GLOBAL COMPANY
GOODRIDE TIRE RECALL FORM
TIN Example:
Please send the form, picture of permanently altered tire(s) and invoice to:
goodriderecall@dextergroup.com
ALL INFORMATION IS REQUIRED TO PROCESS CLAIM
Please note that upon the completion of the recall remedy, Dexter will need the
following:
Invoice for the charges related to the recall remedy:
o Allowable rack time to properly secure trailer and remove affected tire
and wheel assemblies is approximately 0.50 hours per trailer.
o Allowable time for dismount and mount of the replacement tires is
approximately 0.25 hours per tire.
o Standard disposal fee will be reimbursed.
All permanently altered tires must appear in the same picture to ensure
compliance with federal regulations. Full TIN must appear in picture.
o Invoice will not be reimbursed until the picture is provided.
INTERNAL USE ONLY:
Tires shipped (Y,N): ___________
Tire order number: ____________
Tire cost: $_________
Freight charges: $_____________ Admin. Initials: ____________
DOT Symbol Manufacturer’s Code
Plant Code Date Code
•
•
2900 Industrial Parkway E • Elkhart, IN 46515 • Phone: 574-295-7888 • www.dexterqroup.com
A DEXKO GLOBAL COMPANY
**************************************************************************************************************
OMB Control No.: 2127-0004
Part 573 Safety Recall Report 23E-070
The information contained in this report was submitted pursuant to 49 CFR §573
Manufacturer Name : Dexter Axle Company
Submission Date : SEP 25, 2023
NHTSA Recall No. : 23E-070
Manufacturer Recall No. : NR
Manufacturer Information :
Manufacturer Name : Dexter Axle Company
Address : 2900 INDUSTRIAL PARKWAY EAST
PO BOX 250 ELKHART IN 46516
Company phone : 574-295-7888
Population :
Number of potentially involved : 19,808
Estimated percentage with defect : 2 %
Equipment Information :
Brand / Trade 1 : GOODRIDE
Model : ST 200
Part No. : 940041-TT
Size : ST235/80R16 LRE
Function : NR
Descriptive Information : – Product audit of inflated tire/wheel assembles
– Date of manufacture from specific manufacturing site
– One product configuration from specific manufacturing site
Production Dates : APR 17, 2023 – JUN 25, 2023
Description of Noncompliance :
Description of the
Noncompliance :
Sidewall of tires are “delaminating” or manifesting a condition called
“bubbling” in the side wall after inflation.
FMVSS 1 : 119 – New pneumatic tires- other than passenger cars
FMVSS 2 : NR
Description of the Safety Risk : The integrity of the tire sidewall is compromised which may lead to a loss of
tire pressure resulting in loss of mobility of a trailer-in-tow.
No known incidents reported from customers or warranty claims
Trailer control will not impacted by this non-compliance
Description of the Cause : Sidewall thickness is less than specification
Identification of Any Warning
that can Occur :
Defect would be visible on the sidewall of the tire.
Part 573 Safety Recall Report 23E-070 Page 2
The information contained in this report was submitted pursuant to 49 CFR §573
Involved Components :
Component Name : GOODRIDE Tire
Component Description : ST235/80R16 LRE
Component Part Number : 940041-TT
Supplier Identification :
Component Manufacturer
Name : ZC Rubber
Address : No.1, #1 Street Hangzhou Economic & Tech
Xiasha, Hangzhou Foreign States 310018
Country : China
Chronology :
29-August: First indication of failure modes noted mid-afternoon in Cooper, TX stock
30-August: Customer ATW (Big Tex) rejected a total of 760 tire/wheel assemblies due to visual delamination
31-August: Initiated stock sorting at internal assembly operartions in Cooper, TX
1-Sept: Identified suspect stock date range and contacted ZC Rubber (tire manufacturer)
1-Sept: Quartined all tires within the suspect date range (week 16-week 25)
1-Sept: Initiated testing of suspect tires
12-Sept: Evalute testing results with reference to FMVSS standards and determined a potential safety noncompliance
Description of Remedy :
Description of Remedy Program : Inspect tires for specific site codes and manufacturing dates related to tire
identification number (TIN)
Replace all tires with TIN’s of the suspect tires
Dexter will cover the costs of freight, tire replacement, labor, rack time,
and disposal fees
How Remedy Component Differs
from Recalled Component :
Manufacturing site and manufacturing date codes
Identify How/When Recall Condition
was Corrected in Production :
Revised the manufacturing process at China plant the week 25 (25-
Jun-2023)
Part 573 Safety Recall Report 23E-070 Page 3
The information contained in this report was submitted pursuant to 49 CFR §573
Recall Schedule :
Description of Recall Schedule : Issue a notification letter to each OEM/customers that may have received
tire/wheel assemblies with tires produced between 17-April and 25-June
2023 at the ZC Rubber Hangzhou manufacturing site (reference TIN).
Plan to submit draft of Owner Notification letter no later than 5-Oct. for
comment by NHTSA. Notifications will be mailed no earlier than 5
business days after submission.
Planned Dealer Notification Date : OCT 16, 2023 – NOV 17, 2023
Planned Owner Notification Date : NR – NR
Purchaser Information :
The following manufacturers purchased this defective/noncompliant equipment for possible use or
installation in new motor vehicles or new items of motor vehicle equipment:
Name : NR
Address : NR
NR
Country : NR
Company Phone : NR
* NR – Not Reported
**************************************************************************************************************
**************************************************************************************************************
**************************************************************************************************************
SEOCONTENT-END