Recall 0184 – Reduced Braking Ability from Brake Fluid Leak – 2023 Harley-Davidson FLHXSE & FLTRXSE Motorcycles

“This site contains affiliate links for which OEMDTC may be compensated”

October 4, 2023 NHTSA CAMPAIGN NUMBER: 23V672000

Reduced Braking Ability from Brake Fluid Leak

A brake fluid leak can reduce braking ability and increase the risk of a crash.

 

NHTSA Campaign Number: 23V672

Manufacturer Harley-Davidson Motor Company

Components SERVICE BRAKES, HYDRAULIC

Potential Number of Units Affected 2,212

 

Summary

Harley-Davidson Motor Company (Harley-Davidson) is recalling certain 2023 FLHXSE and FLTRXSE motorcycles. The rear brake line may not be secured properly, allowing it to chafe against the exhaust pipe, which can result in a brake fluid leak.

 

Remedy

Dealers will replace the rear brake line clamp, free of charge. Owner notification letters were mailed October 19, 2023. Owners may contact Harley-Davidson customer service at 1-800-258-2464. Harley-Davidson’s number for this recall is 0184.

 

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.

 

Check for Harley-Davidson Recalls

 


M1610
2023-10-16

M1610 (REV A): RECALL 0184 – 2023 CVO STREET GLIDE (FLHXSE) AND ROAD GLIDE (FLTRXSE) BRAKE LINE CLAMP

Purpose for Service Bulletin

This bulletin informs dealers that Harley-Davidson has learned that certain 2023 CVO Street Glide (FLHXSE) or Road Glide (FLTRXSE) model motorcycles may not have the rear brake line properly retained in a lower frame rail clamp, which may allow the brake line to contact the exhaust. Contact between the brake line and the exhaust could, over time, lead to a hole in the brake line and a loss of rear brake fluid. If brake loss remains undetected, rear braking may be compromised, increasing the risk of a crash.

 

Vehicles Affected

2023 CVO: Street Glide (FLHXSE), Road Glide (FLTRXSE)

Markets Affected

All markets affected.

Part Numbers

Refer to Table 2.

 

Table 2. Affected Part Numbers

Part No. Item Description
41800890 Rear brake line

 

Table 3. Recall Kit Part Numbers

Part No. Item Description
91500116 Recall Kit 0184, Brake Line P-Clamp

 

Required Dealer Action

1. See Figure 1. Remove and retain screw (1).

2. Remove and discard Original Equipment (OE) brake line clamp (2).

3. See Figure 2. Install new P-Clamp (3) from recall kit (Part No. 91500116).

a. Make sure P-Clamp (3) is properly orientated.

4. Install screw (1). Tighten.
Torque: 9–11 N·m (80–97 in-lbs)

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [740.25 KB]

 


Chronology :

09/07/2023 – The Harley-Davidson Technical Subcommittee (TSC) is made aware of an SR related to a melted brake line on a MY23 FLHXSE.

09/07/2023 – 09/13/2023 – The TSC met two times to review additional information. Available data shows that there are 3 field reports related to this condition. We are not aware of any crashes or injuries associated with this condition.

09/13/2023 – Upon completion of the investigation, TSC escalated the matter to H-D’s Field Action Committee (FAC) for further consideration.

09/19/2023 – The FAC reviewed the TSC’s findings and analysis and escalated the matter to H-D’s Executive Decision Authority (EDA).

09/27/2023 – Based upon the information developed during the investigation, the EDA authorized a voluntary recall to address this condition.

 


2 Affected Products

Vehicles

MAKE MODEL YEAR
HARLEY-DAVIDSON FLHXSE 2023
HARLEY-DAVIDSON FLTRXSE 2023

 


7 Associated Documents

Defect Notice 573 Report

RCLRPT-23V672-1755.PDF 214.761KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [209.73 KB]

 


Recall Acknowledgement

RCAK-23V672-4301.pdf 645.486KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [630.36 KB]

 


Manufacturer Notices(to Dealers,etc)

RCMN-23V672-1961.pdf 128.007KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [125.01 KB]

 


Recall 573 Report – October 13, 2023

RCLRPT-23V672-2607.PDF 214.727KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [209.69 KB]

 


Remedy Instructions and TSB

RCRIT-23V672-0468.pdf 758.013KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [740.25 KB]

 


Remedy Instructions and TSB

RCRIT-23V672-7505.pdf 757.234KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [739.49 KB]

 


ISSUED Owner Notification Letter(Part 577)

RCONL-23V672-4065.pdf 186.222KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download

 


Latest Recalls Documents

For the Latest and Most Recent Recalls Information Visit the link below…

https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=23V672&docType=RCL

 


 

Bestseller No. 1
Prestone AS401 DOT 3 Synthetic Brake Fluid - 32 oz.
  • Provides an extra margin of safety in extreme braking conditions
  • Mix of polyglycol ethers ensures hot brake-system operation will not create dangerous vapor
  • Excellent for ABS, disc and drum brake systems
  • Delivers braking power when needed by avoiding a spongy pedal
  • Both wet and dry boiling points exceed the minimum government standards
Bestseller No. 2
LUCAS OIL 10826 Brake Fluid - 1 Quart
  • High quality blend of polyethylene glycol ethers and additives
  • Compatible with all brake system rubber components and other brake fluids
  • Prevents seal hardening or softening
  • Protects against rust and corrosion
  • Provides excellent lubricity
Bestseller No. 3
BOSCH ESI6-32N Brake Fluid (Direct Replacement for DOT 3, DOT 4, and DOT 5.1) - 1 Quart
  • High compatibility. Use with or direct replacement for DOT 3, DOT 4, and DOT 5. 1
  • Extended Service Interval (ESI): Lasts 100% longer than DOT 3, 50% longer than DOT 4, and 10% longer than DOT 5. 1
  • Exceeds all DOT 3, DOT 4, and DOT 5. 1 standards
  • Wet boiling point ~ 365 DegreeF/Viscosity at -40 DegreeC ~ 685mm2/s
  • Standard brake fluid has a recommended change interval of 2 years. The recommended change interval for Bosch ESI6 is 3 years.
Bestseller No. 4
Johnsen's 2234 Premium DOT-3 Brake Fluid - 1 Gallon
  • Premium DOT 3 Brake Fluid has a minimum boiling point of 450°F
  • Meets and exceeds DOT 3 and all other Federal and SAE specifications and standards for motor vehicle brake fluids
  • Mixes with all DOT 3 approved brake fluids
  • Designed for use in disc, drum and ABS brake systems
SaleBestseller No. 5
Johnsen's 5034 Premium Synthetic DOT-4 Brake Fluid - 1 Gallon
  • Synthetic quality brake fluid
  • Contains special ingredients to guard against vapor lock and moisture absorption
  • Exceeds requirements for both DOT 3 and DOT 4 brake fluids
  • Specially formulated for DOT 4 brake fluid applications
  • Designed for use in disc, drum and ABS brake systems
Bestseller No. 6
ACDelco GM Original Equipment 10-4110 DOT 3 Hydraulic Brake Fluid - 16 oz
  • Premium brake and hydraulic clutch fluid that protects internal components from corrosion under normal use
  • High boiling point to minimize brake fluid boiling and vapor lock
  • Excellent low temperature capability and stability when used where lower cold viscosities are required
  • Excellent low temperature capability and stability when used where lower cold viscosities are required
SaleBestseller No. 7
Liqui Moly BRAKE FLUID DOT 4 1LTR
  • Premium oil imported from Germany
Bestseller No. 8
Quicksilver 8M0128415 DOT 4 Brake Fluid – 12 Ounce
  • The 336⁰F wet boil point and 521⁰F dry boil point exceeds common characteristics for DOT 4 brake fluids
  • Provides corrosion protection in brake components
  • Matches needs of all DOT 4 manufacturer recommendations
  • Compatible with all DOT 3 and DOT 4 applications
Bestseller No. 9
ATE Original TYP 200 Racing Quality DOT 4 Brake Fluid, 1 Liter Can
  • Minimal decrease of boiling point due to excellent water locking properties
  • Non-foaming when filling and bleeding the brake system
  • Excellent corrosion protection due to selected additives
  • High safety tolerance against steam bubbles
  • Makes brake fluid changing intervals of up to 3 years possible
SaleBestseller No. 10
Motul MTL100949 8068HL RBF 600 Factory Line Dot-4 100 Percent Synthetic Racing Brake Fluid-500, 300. ml, 2 Pack
  • 2 Pack
  • Dry boiling point 594 degrees F
  • Motul 600 brake fluid is 100 percent synthetic and has an extremely high boiling poin
  • Helping to prevent vapor lock and brake fade during hard use
  • This brake fluid exceeds both DOT 3 and DOT 4 specifications

Last update on 2024-04-12 / Affiliate links / Images from Amazon Product Advertising API

This product presentation was made with AAWP plugin.

 


Leave a Comment

Share to...