Transmission Cooler Insufficiently Welded – 2022 E-One Cyclone 2, Cyclone N, & Typhoon N

“This site contains affiliate links for which OEMDTC may be compensated”

June 30, 2023 NHTSA CAMPAIGN NUMBER: 23V459000

Transmission Cooler Insufficiently Welded

Contaminated transmission fluid may cause transmission failure and a loss of drive power, increasing the risk of a crash.

 

NHTSA Campaign Number: 23V459

Manufacturer E-One Incorporated

Components POWER TRAIN

Potential Number of Units Affected 17

 

Summary

E-One Incorporated (E-One) is recalling certain 2022 Cyclone 2, Cyclone N, and Typhoon N vehicles. The transmission cooler may be insufficiently welded, which can result in engine coolant contaminating the transmission fluid.

 

Remedy

Dealers will replace the transmission cooler and fluids, free of charge. Owner notification letters are expected to be mailed July 31, 2023. Owners may contact E-ONE customer service at 1-352-237-1122.

 

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.

 


Chronology :

On March 23, 2023, SO 145099, began exhibiting transmission shifting issues.

On March 24, 2023, it was discovered that the transmission cooler was leaking and allowing engine coolant to contaminate the transmission fluid. E-ONE contacted Radicon, the manufacturer of the transmission cooler, and informed them of the issue.

On March 27, 2023, Radicon informed E-ONE that they found a problem in their welding process in the production units that they had in inventory.

On April 3, 2023, E-ONE received the faulty transmission cooler from truck SO 145099.

On April 28, 2023, Radicon informed E-ONE of their analyses of the returned transmission cooler and they informed E-ONE that the failure of the transmission cooler resulted from the same welding problem as Radicon found in their inventory.

On May 4, 2023, a second failed transmission cooler was returned to E-ONE.

On May 16, 2023, Radicon received the second transmission cooler and confirmed the same welding problem previously seen.

On June 8, 2023, E-ONE recommended to the REV Group Recall Committee that a recall be conducted for this issue.

On June 27, 2023, REV Group Recall Committee met and approved a recall be conducted for this issue.

 


3 Affected Products

Vehicles

MAKE MODEL YEAR
E-ONE CYCLONE II 2022
E-ONE CYCLONE N 2022
E-ONE TYPHOON N 2022

 


2 Associated Documents

Recall Acknowledgement

RCAK-23V459-5670.pdf 645.452KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [630.32 KB]

 


Defect Notice 573 Report

RCLRPT-23V459-7180.PDF 216.013KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [210.95 KB]

 


Latest Recalls Documents

For the Latest and Most Recent Recalls Information Visit the link below…

https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=23V459&docType=RCL

 


 

SaleBestseller No. 1
Hayden Automotive 678 Universal Rapid-Cool 9.5” x 11” Add-On Transmission Cooler – Not for Direct Replacement of the OE Cooler
  • Size Is 3/4 Inch X 11 Inch X 9-1/2 Inch
  • Pick-Up Trucks And Vans, Class "C" Motor Homes , Travel Trailers To 24 Feet
  • Gvwr Up To 24,000 Pounds, Towing Up To 5,000 Pounds
  • Patented Internal Turbulation Increases Heat Transfer With Minimal Pressure Drop
SaleBestseller No. 2
Hayden Aluminum Automotive 403 Ultra-Cool Tube and Fin Transmission Cooler
  • Size: 0.75"D x 12.5"W x 7.5"H. Outlet and Inlet Size: 3/8".
  • Mid-size and full-size cars, pick-ups; Compatible with OEM cooler systems
  • GVWR up to 18,000 pounds, towing up to 3,500 pounds
  • 100% pressure testing to 150 PSI for quality assurance; Ultrasonically soldered for durability. High efficiency turbulators.
  • Please check that this cooler fits your vehicle before purchasing. Please utilize the Compatibility Guide PDF towards the bottom of this page for fitment confirmation.
SaleBestseller No. 3
Hayden Automotive 676 Custom-Add-On Rapid-Cool Transmission Cooler 11.0” x 5.875” x 0.70”, Not for Direct Replacement
  • Size: 11.0”L x 5.875” W x 0.70”H
  • Sub-compact to compact cars; GVWR up to 18,000 pounds
  • Made of steel
  • Patented internal turbulation increases heat transfer with minimal pressure drop
  • Pre-drilled mounting brackets for easy installation
Bestseller No. 4
Automotive Cooling Transmission Oil Cooler For GMC Fits Yukon Sierra 1500 TGM4050111
  • [Warranty]: Lifetime guarantee
  • [Design Material]: Built with the highest grade materials and components
  • [Quality Control]: Each Product is quality inspected and 100% tested
  • [Fitment]: OE design to ensure exact fit, form and function Carefully crafted to exceptional OE standards for precise fit
  • [Compatibility]: If You Would Like To Verify Fitment, Please Send Us A Message As We Respond Quickly
SaleBestseller No. 5
Hayden Automotive 405 Ultra-Cool Tube and Fin Transmission Cooler
  • Size is 3/4 inch x 10 inch x 15-7/8 inch
  • Class "A" motor homes, large travel trailers, 5th wheel trailers
  • GVWR up to 26,000 pounds, towing up to 10,000 pounds
  • Ultrasonically soldered for durability
  • 100 percentage pressure tested
Bestseller No. 6
52 Inch Stainless Steel Braided Lines Transmission Cooler Hose Fitting Fit for Chevy Ford Mopar GM GMC Buick Cadillac Cars and Trucks Replace TH350/ 700R4/ TH400
  • Each 3/8" hose is about 52" long with AN-6 inverted flare ends, and 2 lines in the kit;
  • Fit single and dual pass coolers
  • Fit for lots of Chevy, Ford, Mopar, GM, GMC, Buick, Cadillac cars & trucks.
  • The universal kit is perfect for your Rat Rod, Hot Rod, Street Rod, Muscle Car, Custom and more
  • Package includes:(4) AN-6 flared to 1/4" NPT billet adaptors,(2) AN-6 flared to 3/8" NPT billet adaptors,4) 90 degree AN-6 inverted flare to AN-6 flare billet adaptors,(2) lines in the kit, and each line is about 52".
Bestseller No. 7
Hayden Automotive 512 High Performance Transmission Cooler
  • Size is 3/4 inch x 7-1/2 inch x 12-1/2 inch
  • SAE 45 degree fittings for maximum reliability
  • Electrostatically powder coated to prevent corrosion
  • All aluminum lightweight construction
  • Fits full-size vehicles towing up to 2,500 pounds
SaleBestseller No. 8
Hayden Automotive 106 Transmission Oil Cooler Hose 3/8-IN Diameter x 4.5-FT Length
  • Size is 8 inch x 4-1/2 feet
  • Designed for transmission fluid applications
  • Made for tight radius applications found in transmission cooler installations
  • Package Dimensions : 12" L x 14.5" W x 15" H
SaleBestseller No. 9
Hayden 679 Universal 11” Rapid-Cool Add-On Transmission Cooler to Enhance Cooling (not for direct replacement of the factory unit)
  • Size is 3/4 inch x 11 inch x 11-5/8 inch. Compatible with OEM cooler systems
  • Class "A" motor homes, large travel trailers, 5th wheel trailers
  • GVWR up to 30,000 pounds, towing up to 10,000 pounds
  • Patented internal turbulation increases heat transfer with minimal pressure drop
  • Pre-drilled mounting brackets for easy installation
Bestseller No. 10
Hayden Automotive 401 Ultra-Cool Tube and Fin Transmission Cooler
  • Size is 3/4 inch x 5 inch x 12-1/2 inch
  • Sub-compact to compact cars
  • GVWR up to 12,000 pounds
  • Ultrasonically soldered for durability
  • 100 percentage pressure tested

Last update on 2024-04-23 / Affiliate links / Images from Amazon Product Advertising API

This product presentation was made with AAWP plugin.

 


Leave a Comment

Share to...