“This site contains affiliate links for which OEMDTC may be compensated” |
June 16, 2023 NHTSA CAMPAIGN NUMBER: 23V433000
Failure of the load-holding feature can result in unintended movement of the platform or load, increasing the risk of injury.
NHTSA Campaign Number: 23V433
Manufacturer Altec Industries, Inc.
Components EQUIPMENT
Potential Number of Units Affected 3,824
Summary
Altec Industries, Inc. (Altec) is recalling certain 1999-2022 L Series and LR Series aerial devices. A hydraulic hose may have been installed between the cylinder port and load-holding valve instead of metallic tubing, which can result in a damaged hydraulic hose and failure of the load-holding feature.
Remedy
Altec will inspect the units for a hydraulic hose and replace it with specified metallic tubing, as necessary, free of charge. Owner notification letters are expected to be mailed August 11, 2023. Owners may contact Altec customer service 1-877-462-5832. Altec’s number for this recall is CSN 3090.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Chronology :
In 2021, Altec identified units in production with hydraulic hoses installed in locations where metallic tubing was specified. A production change was made to improve the manufacturability of the assemblies. In 2022 production continued to report difficulty with the assemblies. On September 8, 2022, a potential field action investigation was opened to determine if improper assemblies had reached the field. The investigation resulted in service instructions being launched on November 8, 2022, to collect data on the units in the field to determine the potential affected population. On May 16, 2023, the data collection work was closed after the required level of information was collected. The collected data was reviewed to determine affected units’ assemblies, unit models, and production dates. On June 9, 2023, Altec determined a defect was present on a specific population of aerials that might not comply with aerial device standards and a field campaign was required. There were no warranty claims or field reports identified. There have been no accidents, injuries or deaths related to this issue.
48 Affected Products
Vehicles
MAKE | MODEL | YEAR |
ALTEC | L SERIES AERIAL DEVICE | 1999-2022 |
ALTEC | LR SERIES AERIAL DEVICE | 1999-2022 |
2 Associated Documents
Defect Notice 573 Report
RCLRPT-23V433-7574.PDF 213.95KB
Recall Acknowledgement
RCAK-23V433-8401.pdf 645.954KB
Latest Recalls Documents
For the Latest and Most Recent Recalls Information Visit the link below…
https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=23V433&docType=RCL
- Formulated with premium base stocks for added resistance to thermal breakdown
- Outstanding wear protection
- Excellent resistance to system rust and oil oxidation
- Maintains excellent water separating properties
- Excellent foam control and air release deliver consistent system operation
- Formulated with premium base stocks for added resistance to thermal breakdown
- Outstanding wear protection
- Excellent resistance to system rust and oil oxidation
- Maintains excellent water separating properties
- Excellent foam control and air release deliver consistent system operation
- SUPERIOR WEAR PROTECTION: U1P ISO AW 68 Hydraulic Oil minimizes friction and wear for extended equipment life.
- VERSATILE PERFORMANCE: Suitable for high-pressure industrial applications, this fluid remains stable across wide temperature ranges, safeguarding critical components and seals.
- ADVANCED RUST & CORROSION PREVENTION: Protects hydraulic systems from rust and corrosion for optimal operation.
- OUTSTANDING DEMULSIFICATION: Separates water for cleaner oil and improved system life.
- EXCELLENT FILTERABILITY: Maintains performance at high temperatures and prevents filter clogs.
- Reduces the operating temperature of hydraulic systems
- Conditions old seals and O-rings to stop and prevent future leaks
- Well suited for use in equipment with wet brakes
- Removes varnish and restores pressure for more efficient operation
- Compatible with both synthetic and conventional hydraulic fluids
- MAG 1 AW32 (ISO32) 10-Weight Hydraulic Fluid is a high quality oil that is ideal for use in most 2-stage log splitter pumps. Benefits include exceptional protection against wear from contaminants and higher operating temperatures and pressures ensures longer equipment life.
- Formulated with highly refined group ii base stocks for added resistance to thermal breakdown
- Superior wear protection to protect critical components
- Excellent frictional properties for smooth-shifting, excellent anti-shudder performance
- J20c equivalent, protection against varnish and sludge formation
- Superior thermal stability and oxidation resistance, good seal compatibility
- Formulated with premium base stocks for added resistance to thermal breakdown
- Outstanding wear protection
- Excellent resistance to system rust and oil oxidation
- Maintains excellent water separating properties
- Excellent foam control and air release deliver consistent system operation
Last update on 2024-04-11 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.
SEOCONTENT-START
OMB Control No.: 2127-0004 Part 573 Safety Recall Report 23V-433 The information contained in this report was submitted pursuant to 49 CFR §573 Manufacturer Name : Altec Industries, Inc. Submission Date : JUN 16, 2023 NHTSA Recall No. : 23V-433 Manufacturer Recall No. : CSN 3090 Manufacturer Information : Manufacturer Name : Altec Industries, Inc. Address : 210 Inverness Center Drive Birmingham AL 35242 Company phone : 205 991 7733 Population : Number of potentially involved : 3,824 Estimated percentage with defect : 100 % Vehicle Information : Vehicle 1 : 1999-2022 Altec L series and LR series aerial devices Vehicle Type : Body Style : Power Train : NR Descriptive Information : The recall population was determined from a review of production records. Production Dates : AUG 01, 1999 – OCT 31, 2022 VIN Range 1 : Begin : NR End : NR Not sequential Description of Defect : Description of the Defect : Jib and Platform positioning cylinders on certain Altec aerial devices could have a hydraulic hose installed between a cylinder port and the load-holding valve. Hose failure could allow motion of the platform or material handling jib. FMVSS 1 : NR FMVSS 2 : NR Description of the Safety Risk : Damage to the hydraulic hose could cause a failure of the load-holding feature and allow the platform or load to have uncontrolled movement increasing the risk of injury or death to the operator or others nearby. Description of the Cause : NR Identification of Any Warning that can Occur : When the inspector knows the tubing is required, the hose can be identified in a periodic inspection. If the hose is damaged, a nick or other witness mark or oil leak might be visible before uncontrolled motion. Involved Components : Part 573 Safety Recall Report 23V-433 Page 2 The information contained in this report was submitted pursuant to 49 CFR §573 Component Name 1 : Hose Assembly Component Description : Hose Assembly Component Part Number : NR Supplier Identification : Component Manufacturer Name : Altec Inc. Address : 2106 S Riverside Rd Saint Joseph Missouri 64507-2535 Country : United States Chronology : In 2021, Altec identified units in production with hydraulic hoses installed in locations where metallic tubing was specified. A production change was made to improve the manufacturability of the assemblies. In 2022 production continued to report difficulty with the assemblies. On September 8, 2022, a potential field action investigation was opened to determine if improper assemblies had reached the field. The investigation resulted in service instructions being launched on November 8, 2022, to collect data on the units in the field to determine the potential affected population. On May 16, 2023, the data collection work was closed after the required level of information was collected. The collected data was reviewed to determine affected units’ assemblies, unit models, and production dates. On June 9, 2023, Altec determined a defect was present on a specific population of aerials that might not comply with aerial device standards and a field campaign was required. There were no warranty claims or field reports identified. There have been no accidents, injuries or deaths related to this issue. Description of Remedy : Description of Remedy Program : The affected units will be inspected for a hydraulic hose installed in an incorrect location. If a hose is present, it will be replaced with the specified metallic tubing. The recall remedy will be completed free of charge when presented for repair. The Altec Warranty Policy covers the recall remedy including cases requiring reimbursement for the cost of obtaining a prenotification remedy of the problem associated with this recall. How Remedy Component Differs from Recalled Component : The remedy will use metallic tubing between the cylinder port and the load-holding device. Identify How/When Recall Condition was Corrected in Production : Production updated the work instructions, training, and component stocking in October of 2022. Part 573 Safety Recall Report 23V-433 Page 3 The information contained in this report was submitted pursuant to 49 CFR §573 Recall Schedule : Description of Recall Schedule : Altec will issue CSN 3090 to the owners of the affected units. Altec does not have a dealer network and issues letters to owners only. Planned Dealer Notification Date : AUG 11, 2023 – AUG 11, 2023 Planned Owner Notification Date : AUG 11, 2023 – AUG 11, 2023 * NR – Not Reported
**************************************************************************************************************
**************************************************************************************************************
**************************************************************************************************************
**************************************************************************************************************
SEOCONTENT-END