“This site contains affiliate links for which OEMDTC may be compensated” |
October 20, 2022 NHTSA CAMPAIGN NUMBER: 22V790000
A loose fastener may prevent the parking brake from properly engaging, allowing the vehicle to rollaway and increasing the risk of a crash.
NHTSA Campaign Number: 22V790
Manufacturer Orange EV
Components PARKING BRAKE
Potential Number of Units Affected 106
Summary
Orange EV (OEV) is recalling certain 2022 e-Triever vehicles. The fastener for the parking brake slack adjustor may not have been properly tightened.
Remedy
OEV Service will tighten or replace the fastener, free of charge. All affected vehicles were remedied by December 19, 2022. Owners may contact OEV customer service at 1-866-688-5223.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Chronology :
August 2022 customer reported parking brake not holding.
Multiple rounds of adjustments and additional not holding reports resulted in replacement of slack adjusters which also loosened.
On 10/5 we discovered that the anchor stud was missing a nut and allowing the anchor pin to float freely.
Correction of this issue on 10/5 resulted in slack adjuster setting holding as expected.
More installed trucks in the field were evaluated (and the nuts torqued) to determine if this was a unique, owner created issue. The discovery of more affected trucks resulted in a determination that the issue needed official corrective action.
All corrective action was performed at no cost to customer
1 Affected Product
Vehicle
MAKE | MODEL | YEAR |
ORANGE EV | E-TRIEVER | 2022 |
4 Associated Documents
Recall Acknowledgement
RCAK-22V790-4874.pdf 646.528KB
Defect Notice 573 Report
RCLRPT-22V790-8323.PDF 214.793KB
Recall 573 Report-Amendment 1 – 01/03/2023
RCLRPT-22V790-4879.PDF 214.959KB
Recall Quarterly Report #1, 2022-4
RCLQRT-22V790-8209.PDF 211.098KB
Latest Recalls Documents
https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=22V790&docType=RCL
- Specifically engineered to provide premium performance for everyday driving conditions
- Application specific semi-metallic, ceramic and organic friction materials with First To Market coverage
- Shim materials quiet noise, vibration and harshness
- Consistent fit, form and function including slots and chamfers when designed by Original Equipment
- Abutment clips and integral electronic wear sensors included where applicable
- Asbestos free and made from new steel.Material:Steel
- Secondary post cure and precision cam ground
- Post cured for more brake power and shorter break-in time
- Shoes are Arc Ground for proper fitment
- Superior durability made to last
- SUPER PREMIUM GRADE: Raybestos Element3 Brake Shoes offer super premium replacement brake shoes made with organic materials to ensure the best performance and service life
- NEW STEEL: Premium new steel, either contour or cam ground--depending on the application--facilitates proper shoe to drum contact to ensure great stopping power
- SUPERIOR DURABILITY: Premium dipped coating provides resistance for superior durability and reliability in long term use
- EASY INSTALLATION: Attached levers and hardware included where applicable for easy and complete installation
- VEHICLE FIT: Buick Rainier 2004-2007; Cadillac DeVille 2000-2005, DTS 2006-2011, Escalade 2002-2014, Escalade ESV 2003-2014, Escalade EXT 2002-2013; Chevrolet Astro 2003-2005, Avalanche 2007-2013, Avalanche 1500 2002-2006, Express 1500 2003-2014, Silverado 1500 1999-2013, Silverado 1500 Classic 2007, Silverado 1500 HD 2001-2003, 2005-2006, Silverado 2500 2004, Silverado 2500 HD 2004-2005, SSR 2003-2006, Suburban 1500 2000-2014, Suburban 2500 2003-2005, Tahoe 2000-2014, Trailblazer 2002-2009, Trailblazer EXT 2002-2006
- OPTIMAL BRAKING PERFORMANCE -- OE-matched friction material for optimal brake performance
- MAXIMIZES FRICTION-TO-DRUM CONTACT -- Precision ground material maximizes friction-to-drum contact
- MATCHES OE DESIGN --Attached levers and pins included to match OE (on specific applications)
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- HARDWARE INCLUDED -- Attached levers and pins to match OE are included on select applications
- Direct replacement - this parking brake hardware kit is designed to match the original hardware required to repair the parking brake on specified vehicles
- Ideal solution - this kit is a reliable replacement for original components that have failed due to fatigue
- Durable construction - this kit is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality - backed by team of product experts in the United States and more than a century of automotive experience
- Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool
- Performs to standards required by OE manufacturers ensuring optimal protection, service life, and safety
- Includes necessary hardware for easy installation
- Thoroughly manufactured to meet your expectations for fit, form, and function
- Country of Origin: Taiwan, Province Of China
- Performs to standards required by OE manufacturers ensuring optimal protection, service life, and safety
- Manufacturer Part# 1911785 1911594.
- Fitment: Fit for Polaris UTV as Follows ▶ Ranger 500 2010 ▶ Ranger 800 2010-2014 Exclude 6x6, Mid-size Edition ▶ Ranger 800 Crew 2010-2014 Exclude 6x6, Mid-size Edition
- Feature:OEM specifications. Parking Brake Caliper is made of high-quality materials, it is not easily deformed and has a long service life.
- Package:Parking Brake Caliper × 1.
- Service: If there is any product problem within 1 year, please contact us to solve it for you.We provide product service.
- Asbestos free and made from new steel
- Secondary post cure and precision cam ground
- Post cured for more brake power and shorter break-in time
- Shoes are Arc Ground for proper fitment
- Superior durability made to last
- OPTIMAL BRAKING PERFORMANCE -- OE-matched friction material for optimal brake performance
- MAXIMIZES FRICTION-TO-DRUM CONTACT -- Precision ground material maximizes friction-to-drum contact
- MATCHES OE DESIGN -- Attached levers and pins included to match OE (on specific applications)
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- HARDWARE INCLUDED -- OE-style lubricant and abutment clips are included
- Precision engineered OE style design ensures proper fit for a no hassle installation
- 100 percent asbestos-free friction formulations for extended wear, consistent braking performance and long life
- 100 percent all-new steel provides durable construction for long life
- Rust inhibitive coating prevents rust and extends durability
- Set includes brake shoes for 1 axle (2 wheels); Bonded construction; Hardware kit not included
Last update on 2024-06-12 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.
SEOCONTENT-START
OMB Control No.: 2127-0004 Part 573 Safety Recall Report 22V-790 The information contained in this report was submitted pursuant to 49 CFR §573 Manufacturer Name : Orange EV Submission Date : OCT 20, 2022 NHTSA Recall No. : 22V-790 Manufacturer Recall No. : NR Manufacturer Information : Manufacturer Name : Orange EV Address : 5710 NW 41st St., Ste. 300 Riverside MO 64150 Company phone : 2141072 Population : Number of potentially involved : 106 Estimated percentage with defect : 100 % Vehicle Information : Vehicle 1 : 2022-2022 Orange EV e-Triever Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : OTHER Power Train : NR Descriptive Information : Slack adjustor anchor pin mounting nut was not properly torqued by neither the component manufacturer nor Orange EV. OEV has remedied 71 trucks as part of the evaluation process and there remain 35 trucks to check/perform corrective action(s). Production Dates : APR 30, 2022 – OCT 07, 2022 VIN Range 1 : Begin : 1Z9TA8EA0NR530008 End : 1Z9TA8EA4NR530142 ✔ Not sequential Description of Defect : Description of the Defect : the parking brake slack adjustor anchor pin mounting nut was not properly torqued by neither the component manufacturer nor Orange EV. FMVSS 1 : 105 – Hydraulic and electric brake systems FMVSS 2 : NR Description of the Safety Risk : Potential degradation and failure of the efficacy of the parking brake. Description of the Cause : the nut were not properly torqued by either the axle OEM or OEV personnel Identification of Any Warning that can Occur : None Involved Components : Part 573 Safety Recall Report 22V-790 Page 2 The information contained in this report was submitted pursuant to 49 CFR §573 Component Name 1 : NR Component Description : NR Component Part Number : NR Supplier Identification : Component Manufacturer Name : NR Address : NR NR Country : NR Chronology : August 2022 customer reported parking brake not holding. Multiple rounds of adjustments and additional not holding reports resulted in replacement of slack adjusters which also loosened. On 10/5 we discovered that the anchor stud was missing a nut and allowing the anchor pin to float freely. Correction of this issue on 10/5 resulted in slack adjuster setting holding as expected. More installed trucks in the field were evaluated (and the nuts torqued) to determine if this was a unique, owner created issue. The discovery of more affected trucks resulted in a determination that the issue needed official corrective action. Description of Remedy : Description of Remedy Program : OEV service techs will contact customers and go to customer site to tighten or replace the Slcak nut. How Remedy Component Differs from Recalled Component : No difference Identify How/When Recall Condition was Corrected in Production : After discovery, the corrective action of torquing the nut were determined as the appropriate production action. Recall Schedule : Description of Recall Schedule : OEV will provide customer notifications within 60 days Planned Dealer Notification Date : NR – NR Planned Owner Notification Date : DEC 19, 2022 – FEB 19, 2023 Part 573 Safety Recall Report 22V-790 Page 3 The information contained in this report was submitted pursuant to 49 CFR §573 * NR – Not Reported
**************************************************************************************************************
OMB Control No.: 2127-0004 Part 573 Safety Recall Report 22V-790 The information contained in this report was submitted pursuant to 49 CFR §573 Manufacturer Name : Orange EV Submission Date : JAN 03, 2023 NHTSA Recall No. : 22V-790 Manufacturer Recall No. : NR Manufacturer Information : Manufacturer Name : Orange EV Address : 5710 NW 41st St., Ste. 300 Riverside MO 64150 Company phone : 2141072 Population : Number of potentially involved : 106 Estimated percentage with defect : 100 % Vehicle Information : Vehicle 1 : 2022-2022 Orange EV e-Triever Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : OTHER Power Train : NR Descriptive Information : Slack adjustor anchor pin mounting nut was not properly torqued by neither the component manufacturer nor Orange EV. OEV has remedied 71 trucks as part of the evaluation process and there remain 35 trucks to check/perform corrective action(s). Production Dates : APR 30, 2022 – OCT 07, 2022 VIN Range 1 : Begin : 1Z9TA8EA0NR530008 End : 1Z9TA8EA4NR530142 ✔ Not sequential Description of Defect : Description of the Defect : the parking brake slack adjustor anchor pin mounting nut was not properly torqued by neither the component manufacturer nor Orange EV. FMVSS 1 : 105 – Hydraulic and electric brake systems FMVSS 2 : NR Description of the Safety Risk : Potential degradation and failure of the efficacy of the parking brake. Description of the Cause : the nut were not properly torqued by either the axle OEM or OEV personnel Identification of Any Warning that can Occur : None Involved Components : Part 573 Safety Recall Report 22V-790 Page 2 The information contained in this report was submitted pursuant to 49 CFR §573 Component Name 1 : Slack Adjuster Component Description : It controls the slack on the parking brake line Component Part Number : AB0402B0-3 Supplier Identification : Component Manufacturer Name : FUWA Address : No. 1 Santai Road North Taishan City, Guangdong Foreign States 529200 P. Country : China Chronology : August 2022 customer reported parking brake not holding. Multiple rounds of adjustments and additional not holding reports resulted in replacement of slack adjusters which also loosened. On 10/5 we discovered that the anchor stud was missing a nut and allowing the anchor pin to float freely. Correction of this issue on 10/5 resulted in slack adjuster setting holding as expected. More installed trucks in the field were evaluated (and the nuts torqued) to determine if this was a unique, owner created issue. The discovery of more affected trucks resulted in a determination that the issue needed official corrective action. All corrective action was performed at no cost to customer Description of Remedy : Description of Remedy Program : OEV service techs will contact customers and go to customer site to tighten or replace the Slcak nut. How Remedy Component Differs from Recalled Component : No difference other than Correctly tightened Identify How/When Recall Condition was Corrected in Production : After discovery, the corrective action of torquing the nut were determined as the appropriate production action. Recall Schedule : Description of Recall Schedule : OEV has performed all corrective actions prior to the 60 day window elapsing Planned Dealer Notification Date : NR – NR Planned Owner Notification Date : DEC 19, 2022 – FEB 19, 2023 Part 573 Safety Recall Report 22V-790 Page 3 The information contained in this report was submitted pursuant to 49 CFR §573 * NR – Not Reported
**************************************************************************************************************
SEOCONTENT-END