Vehicle Rollaway from Guide Bushing Fatigue – 2019-2022 Freightliner Sprinter

SEOCONTENT-START

OMB Control No.: 2127-0004 Part 573 Safety Recall Report 22V-796 The information contained in this report was submitted pursuant to 49 CFR §573 Manufacturer Name : Daimler Vans USA, LLC Submission Date : OCT 24, 2022 NHTSA Recall No. : 22V-796 Manufacturer Recall No. : 22V2790611,2,3 Manufacturer Information : Manufacturer Name : Daimler Vans USA, LLC Address : One Mercedes-Benz Drive Sandy Springs GA 30328 Company phone : 8777628267 Population : Number of potentially involved : 124,305 Estimated percentage with defect : 100 % Vehicle Information : Vehicle 1 : 2019-2022 Mercedes-Benz Sprinter Vehicle Type : Body Style : VAN Power Train : DIESEL Descriptive Information : The recall population was determined through production records to include all Sprinter (907 platform) vehicles with manual parking brake and 7-speed automatic transmission. Production Dates : MAR 02, 2018 – OCT 17, 2022 VIN Range 1 : Begin : NR End : NR Not sequential Vehicle 2 : 2019-2022 Freightliner Sprinter Vehicle Type : Body Style : VAN Power Train : DIESEL Descriptive Information : The recall population was determined through production records to include all Sprinter (907 platform) vehicles with manual parking brake and 7-speed automatic transmission. Production Dates : MAR 02, 2018 – OCT 17, 2022 VIN Range 1 : Begin : NR End : NR Not sequential Description of Defect : Description of the Defect : Due to specific driver parking practices in combination with the threshold speed parameter (maximum speed up to which the parking lock function can be requested), there could be increased wear on the guide bushing of the park pawl. As a result, the parking pawl might not engage temporarily. FMVSS 1 : NR Part 573 Safety Recall Report 22V-796 Page 2 The information contained in this report was submitted pursuant to 49 CFR §573 FMVSS 2 : NR Description of the Safety Risk : If the vehicle is not properly secured in accordance with parking instructions in the operator’s manual (including usage of the parking brake), it cannot be ruled out that the vehicle might roll away from its parked position under certain circumstances. Thus, the risk of an accident could increase. Description of the Cause : Due to specific driver parking practices in combination with the threshold speed parameter (maximum speed up to which the parking lock function can be requested), there could be increased wear on the guide bushing of the park pawl. As a result, the parking pawl might not engage temporarily. Identification of Any Warning that can Occur : The driver will not receive a warning due to the nature of the failure mechanism. Involved Components : Component Name 1 : Software ESP (electronic stability program) contro Component Description : Software ESP (electronic stability program) control unit Component Part Number : A9079023001 Component Name 2 : Software ESP (electronic stability program) contro Component Description : Software ESP (electronic stability program) control unit Component Part Number : A9079023101 Component Name 3 : Software ESP (electronic stability program) contro Component Description : Software ESP (electronic stability program) control unit Component Part Number : A9079024002 Component Name 4 : Software ESP (electronic stability program) contro Component Description : Software ESP (electronic stability program) control unit Component Part Number : A9079024102 Component Name 5 : Software ESP (electronic stability program) contro Component Description : Software ESP (electronic stability program) control unit Component Part Number : A9079025202 Part 573 Safety Recall Report 22V-796 Page 3 The information contained in this report was submitted pursuant to 49 CFR §573 Component Name 6 : Software ESP (electronic stability program) contro Component Description : Software ESP (electronic stability program) control unit Component Part Number : A9079025302 Component Name 7 : Software ESP (electronic stability program) contro Component Description : Software ESP (electronic stability program) control unit Component Part Number : A9079021903 Component Name 8 : Software ESP (electronic stability program) contro Component Description : Software ESP (electronic stability program) control unit Component Part Number : A9079022003 Component Name 9 : Software ESP (electronic stability program) contro Component Description : Software ESP (electronic stability program) control unit Component Part Number : A9079024903 Component Name 10 : Software ESP (electronic stability program) contro Component Description : Software ESP (electronic stability program) control unit Component Part Number : A9079025003 Component Name 11 : Software ESP (electronic stability program) contro Component Description : Software ESP (electronic stability program) control unit Component Part Number : A9079024604 Component Name 12 : Software ESP (electronic stability program) contro Component Description : Software ESP (electronic stability program) control unit Component Part Number : A9079024704 Part 573 Safety Recall Report 22V-796 Page 4 The information contained in this report was submitted pursuant to 49 CFR §573 Component Name 13 : Software ESP (electronic stability program) contro Component Description : Software ESP (electronic stability program) control unit Component Part Number : A9079024804 Component Name 14 : Software ESP (electronic stability program) contro Component Description : Software ESP (electronic stability program) control unit Component Part Number : A9079029904 Component Name 15 : Software ESP (electronic stability program) contro Component Description : Software ESP (electronic stability program) control unit Component Part Number : A9079029704 Component Name 16 : Software ESP (electronic stability program) contro Component Description : Software ESP (electronic stability program) control unit Component Part Number : A9079029804 Component Name 17 : Software ESP (electronic stability program) contro Component Description : Software ESP (electronic stability program) control unit Component Part Number : A9079020806 Component Name 18 : Software ESP (electronic stability program) contro Component Description : Software ESP (electronic stability program) control unit Component Part Number : A9079021006 Component Name 19 : Software EIS (electronic ignition switch) control Component Description : Software EIS (electronic ignition switch) control unit Component Part Number : A9079027505 Part 573 Safety Recall Report 22V-796 Page 5 The information contained in this report was submitted pursuant to 49 CFR §573 Component Name 20 : Software TCM (transmission control module) control Component Description : Software TCM (transmission control module) control unit Component Part Number : A0009022852 Component Name 21 : Software TCM (transmission control module) control Component Description : Software TCM (transmission control module) control unit Component Part Number : A0009022852 Component Name 22 : Software DSM (direct select module) control unit Component Description : Software DSM (direct select module) control unit Component Part Number : A0124483610 Supplier Identification : Component Manufacturer Name : NR Address : NR NR Country : NR Chronology : Please See Attached. Description of Remedy : Description of Remedy Program : As a precautionary measure, Mercedes-Benz AG, via its Mercedes-Benz service partners, will update the software of various control units (among others ESP and transmission control unit) on the affected vehicles. How Remedy Component Differs from Recalled Component : Updated software with reduced threshold speed and recalibration of PLS function Identify How/When Recall Condition was Corrected in Production : A change in the process ensures that this issue can no longer occur from Oct 18, 2022 onwards. Part 573 Safety Recall Report 22V-796 Page 6 The information contained in this report was submitted pursuant to 49 CFR §573 Recall Schedule : Description of Recall Schedule : Dealers will be notified of the voluntary recall campaign tentatively in December 2022. A copy of all communications will be provided when available. Owners will be notified of the voluntary recall campaign one week after Dealer has been notified. Planned Dealer Notification Date : DEC 12, 2022 – DEC 12, 2022 Planned Owner Notification Date : DEC 19, 2022 – DEC 19, 2022 * NR – Not Reported

**************************************************************************************************************

OMB Control No.: 2127-0004 Part 573 Safety Recall Report 22V-796 The information contained in this report was submitted pursuant to 49 CFR §573 Manufacturer Name : Daimler Vans USA, LLC Submission Date : NOV 04, 2022 NHTSA Recall No. : 22V-796 Manufacturer Recall No. : 22V2790611,2,3 Manufacturer Information : Manufacturer Name : Daimler Vans USA, LLC Address : One Mercedes-Benz Drive Sandy Springs GA 30328 Company phone : 8777628267 Population : Number of potentially involved : 124,305 Estimated percentage with defect : 100 % Vehicle Information : Vehicle 1 : 2019-2022 Freightliner Sprinter Vehicle Type : Body Style : VAN Power Train : DIESEL Descriptive Information : The recall population was determined through production records to include all Sprinter (907 platform) vehicles with manual parking brake and 7-speed automatic transmission. Production Dates : MAR 02, 2018 – OCT 17, 2022 VIN Range 1 : Begin : NR End : NR Not sequential Vehicle 2 : 2019-2022 Mercedes-Benz Sprinter Vehicle Type : Body Style : VAN Power Train : DIESEL Descriptive Information : The recall population was determined through production records to include all Sprinter (907 platform) vehicles with manual parking brake and 7-speed automatic transmission. Production Dates : MAR 02, 2018 – OCT 17, 2022 VIN Range 1 : Begin : NR End : NR Not sequential Description of Defect : Description of the Defect : Due to specific driver parking practices in combination with the threshold speed parameter (maximum speed up to which the parking lock function can be requested), there could be increased wear on the guide bushing of the park pawl. As a result, the parking pawl might not engage temporarily. FMVSS 1 : NR Part 573 Safety Recall Report 22V-796 Page 2 The information contained in this report was submitted pursuant to 49 CFR §573 FMVSS 2 : NR Description of the Safety Risk : If the vehicle is not properly secured in accordance with parking instructions in the operator’s manual (including usage of the parking brake), it cannot be ruled out that the vehicle might roll away from its parked position under certain circumstances. Thus, the risk of an accident could increase. Description of the Cause : Due to specific driver parking practices in combination with the threshold speed parameter (maximum speed up to which the parking lock function can be requested), there could be increased wear on the guide bushing of the park pawl. As a result, the parking pawl might not engage temporarily. Identification of Any Warning that can Occur : The driver will not receive a warning due to the nature of the failure mechanism. Involved Components : Component Name 1 : Parameter Set for ESP (electronic stability contro Component Description : Parameter Set for ESP (Electronic Stability Program) control unit Component Part Number : Error in software parameters specified by MBAG to supplier Component Name 2 : Parameter Set for EIS (Electronic Ignition Switch) Component Description : Parameter Set for EIS (Electronic Ignition Switch) control unit Component Part Number : Error in software parameters specified by MBAG to supplier Component Name 3 : Parameter Set for TCM (Transmission Control Module Component Description : Parameter Set for TCM (Transmission Control Module) control unit Component Part Number : Error in software parameters specified by MBAG to supplier Component Name 4 : Parameter Set for DSM(Direct Select Module) contro Component Description : Parameter Set for DSM(Direct Select Module) control unit Component Part Number : Error in software parameters specified by MBAG to supplier Supplier Identification : Component Manufacturer Part 573 Safety Recall Report 22V-796 Page 3 The information contained in this report was submitted pursuant to 49 CFR §573 Name : Mercedes-Benz AG Address : NR Foreign States Country : Germany Chronology : Please See Attached. Description of Remedy : Description of Remedy Program : As a precautionary measure, Mercedes-Benz AG, via its Mercedes-Benz service partners, will update the software of various control units (ESP control unit, transmission control unit, electronic ignition switch control unit and direct select module control unit) on the affected vehicles. Pursuant to 49 C.F.R. § 577.11(e), MBUSA does plan to provide notice about pre-notice reimbursement to owners since most of the involved vehicles would have been previously subject to the condition described and customers who have already paid to have this recall condition corrected may be eligible to receive reimbursement. How Remedy Component Differs from Recalled Component : Updated software with reduced threshold speed and recalibration of PLS function. Parameter Set ESP (electronic stability program) control unit Parameter Set EIS (electronic ignition switch) control unit Parameter Set TCM (transmission control module) control unit Parameter Set DSM (direct select module) control unit Identify How/When Recall Condition was Corrected in Production : A change in the process ensures that this issue can no longer occur from Oct 18, 2022 onwards. Recall Schedule : Description of Recall Schedule : Dealers will be notified of the voluntary recall campaign tentatively in December 2022. A copy of all communications will be provided when available. Owners will be notified of the voluntary recall campaign one week after Dealer has been notified. Planned Dealer Notification Date : DEC 12, 2022 – DEC 12, 2022 Planned Owner Notification Date : DEC 19, 2022 – DEC 19, 2022 * NR – Not Reported

**************************************************************************************************************

OMB Control No.: 2127-0004 Part 573 Safety Recall Report 22V-796 The information contained in this report was submitted pursuant to 49 CFR §573 Manufacturer Name : Daimler Vans USA, LLC Submission Date : OCT 21, 2022 NHTSA Recall No. : 22V-796 Manufacturer Recall No. : NR Manufacturer Information : Manufacturer Name : Daimler Vans USA, LLC Address : One Mercedes-Benz Drive Sandy Springs GA 30328 Company phone : 8777628267 Population : Number of potentially involved : 124,305 Estimated percentage with defect : 100 % Vehicle Information : Vehicle 1 : 2019-2022 Mercedes-Benz Sprinter Vehicle Type : Body Style : VAN Power Train : DIESEL Descriptive Information : The recall population was determined through production records to include all Sprinter (907 platform) vehicles with manual parking brake and 7-speed automatic transmission. Production Dates : MAR 02, 2018 – OCT 17, 2022 VIN Range 1 : Begin : NR End : NR Not sequential Vehicle 2 : 2019-2022 Freightliner Sprinter Vehicle Type : Body Style : VAN Power Train : DIESEL Descriptive Information : The recall population was determined through production records to include all Sprinter (907 platform) vehicles with manual parking brake and 7-speed automatic transmission. Production Dates : MAR 02, 2018 – OCT 17, 2022 VIN Range 1 : Begin : NR End : NR Not sequential Description of Defect : Description of the Defect : Due to specific driver parking practices in combination with the threshold speed parameter (maximum speed up to which the parking lock function can be requested), there could be increased wear on the guide bushing of the park pawl. As a result, the parking pawl might not engage temporarily. FMVSS 1 : NR Part 573 Safety Recall Report 22V-796 Page 2 The information contained in this report was submitted pursuant to 49 CFR §573 FMVSS 2 : NR Description of the Safety Risk : If the vehicle is not properly secured in accordance with parking instructions in the operator’s manual (including usage of the parking brake), it cannot be ruled out that the vehicle might roll away from its parked position under certain circumstances. Thus, the risk of an accident could increase. Description of the Cause : Due to specific driver parking practices in combination with the threshold speed parameter (maximum speed up to which the parking lock function can be requested), there could be increased wear on the guide bushing of the park pawl. As a result, the parking pawl might not engage temporarily. Identification of Any Warning that can Occur : The driver will not receive a warning due to the nature of the failure mechanism. Involved Components : Component Name 1 : Software ESP (electronic stability program) contro Component Description : Software ESP (electronic stability program) control unit Component Part Number : A9079023001 Component Name 2 : Software ESP (electronic stability program) contro Component Description : Software ESP (electronic stability program) control unit Component Part Number : A9079023101 Component Name 3 : Software ESP (electronic stability program) contro Component Description : Software ESP (electronic stability program) control unit Component Part Number : A9079024002 Component Name 4 : Software ESP (electronic stability program) contro Component Description : Software ESP (electronic stability program) control unit Component Part Number : A9079024102 Component Name 5 : Software ESP (electronic stability program) contro Component Description : Software ESP (electronic stability program) control unit Component Part Number : A9079025202 Part 573 Safety Recall Report 22V-796 Page 3 The information contained in this report was submitted pursuant to 49 CFR §573 Component Name 6 : Software ESP (electronic stability program) contro Component Description : Software ESP (electronic stability program) control unit Component Part Number : A9079025302 Component Name 7 : Software ESP (electronic stability program) contro Component Description : Software ESP (electronic stability program) control unit Component Part Number : A9079021903 Component Name 8 : Software ESP (electronic stability program) contro Component Description : Software ESP (electronic stability program) control unit Component Part Number : A9079022003 Component Name 9 : Software ESP (electronic stability program) contro Component Description : Software ESP (electronic stability program) control unit Component Part Number : A9079024903 Component Name 10 : Software ESP (electronic stability program) contro Component Description : Software ESP (electronic stability program) control unit Component Part Number : A9079025003 Component Name 11 : Software ESP (electronic stability program) contro Component Description : Software ESP (electronic stability program) control unit Component Part Number : A9079024604 Component Name 12 : Software ESP (electronic stability program) contro Component Description : Software ESP (electronic stability program) control unit Component Part Number : A9079024704 Part 573 Safety Recall Report 22V-796 Page 4 The information contained in this report was submitted pursuant to 49 CFR §573 Component Name 13 : Software ESP (electronic stability program) contro Component Description : Software ESP (electronic stability program) control unit Component Part Number : A9079024804 Component Name 14 : Software ESP (electronic stability program) contro Component Description : Software ESP (electronic stability program) control unit Component Part Number : A9079029904 Component Name 15 : Software ESP (electronic stability program) contro Component Description : Software ESP (electronic stability program) control unit Component Part Number : A9079029704 Component Name 16 : Software ESP (electronic stability program) contro Component Description : Software ESP (electronic stability program) control unit Component Part Number : A9079029804 Component Name 17 : Software ESP (electronic stability program) contro Component Description : Software ESP (electronic stability program) control unit Component Part Number : A9079020806 Component Name 18 : Software ESP (electronic stability program) contro Component Description : Software ESP (electronic stability program) control unit Component Part Number : A9079021006 Component Name 19 : Software EIS (electronic ignition switch) control Component Description : Software EIS (electronic ignition switch) control unit Component Part Number : A9079027505 Part 573 Safety Recall Report 22V-796 Page 5 The information contained in this report was submitted pursuant to 49 CFR §573 Component Name 20 : Software TCM (transmission control module) control Component Description : Software TCM (transmission control module) control unit Component Part Number : A0009022852 Component Name 21 : Software TCM (transmission control module) control Component Description : Software TCM (transmission control module) control unit Component Part Number : A0009022852 Component Name 22 : Software DSM (direct select module) control unit Component Description : Software DSM (direct select module) control unit Component Part Number : A0124483610 Supplier Identification : Component Manufacturer Name : NR Address : NR NR Country : NR Chronology : Please See Attached. Description of Remedy : Description of Remedy Program : As a precautionary measure, Mercedes-Benz AG, via its Mercedes-Benz service partners, will update the software of various control units (among others ESP and transmission control unit) on the affected vehicles. How Remedy Component Differs from Recalled Component : NR Identify How/When Recall Condition was Corrected in Production : A change in the process ensures that this issue can no longer occur from Oct 18, 2022 onwards. Part 573 Safety Recall Report 22V-796 Page 6 The information contained in this report was submitted pursuant to 49 CFR §573 Recall Schedule : Description of Recall Schedule : Dealers will be notified of the voluntary recall campaign tentatively in December 2022. A copy of all communications will be provided when available. Owners will be notified of the voluntary recall campaign one week after Dealer has been notified. Planned Dealer Notification Date : DEC 12, 2022 – DEC 12, 2022 Planned Owner Notification Date : DEC 19, 2022 – DEC 19, 2022 * NR – Not Reported

**************************************************************************************************************

IMPORTANT SAFETY RECALL This notice applies to your vehicle VIN: Update Park Lock Function NHTSA Recall #22V796 December, 2022 This notice is sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act. Mercedes-Benz AG (“MBAG”), the manufacturer of Freightliner Sprinter vans, has determined that a defect, which relates to motor vehicle safety, exists in certain Model Year (“MY”) 2019-2022 Freightliner Sprinter vehicles. Our records indicate that your vehicle is included in the affected population of vehicles. A component of the vehicle’s park lock system might fatigue, which can cause the parking pawl not to engage and result in a vehicle rollaway. This may increase the risk of a crash. Daimler Vans USA reminds drivers to always follow the parking instructions in the vehicle’s Operator’s Manual, including setting the manual parking brake. An authorized Freightliner Sprinter dealer will update the software of various control units (Direct Select Module, Electronic Ignition Switch Module, Electronic Stability Program Module, and Transmission Control Unit) on the affected vehicles, free of charge. Unfortunately, the software to remedy this issue is currently not yet available. We are working to obtain the necessary software to correct this condition as quickly as possible. When the software becomes available, we will send you another letter asking you to take your vehicle to an authorized Freightliner Sprinter dealer to have the recall completed free of charge. Should you have any concerns or questions regarding your vehicle before you receive the next recall letter when the software is available, please contact an authorized Freightliner Sprinter dealer. If for any reason a dealer is unable to remedy your situation, we are always happy to hear from you. Please contact us at 1-877-762-8267. A vehicle identification number (VIN)-based recall lookup tool on our website offers a search function that will indicate whether a vehicle has been subject to a safety recall, and whether that vehicle has had the free remedy performed. Please visit www.Freightlinersprinterusa.com/en/recall-information and enter your 17 digit VIN in the VIN Look-up tool. We also encourage you to sign up for recall alerts at www.nhtsa.gov/alerts. In the event that you are no longer the vehicle owner, or have had a change of address, please complete the reverse side and return the updated information in the enclosed envelope. If this is a leased vehicle and the lessor and registered owner receive this notice, please forward this information by first class mail to the lessee within 10 business days to comply with Federal Regulations. We apologize for any inconvenience this situation may cause you. Sincerely, Daimler Vans USA • A safety defect exists in your vehicle. • Remedy software is not yet available for your vehicle. • We will contact you again once the software is available. IMPORTANT SAFETY RECALL Daimler Vans USA, LLC One Mercedes-Benz Drive Sandy Springs, GA 30328 Phone: (770) 705-0600

**************************************************************************************************************

IMPORTANT SAFETY RECALL This notice applies to your vehicle VIN: Update Park Lock Function NHTSA Recall #22V796 January, 2023 Dear Valued Freightliner Sprinter Owner: This notice is being sent to you in accordance with the National Traffic and Motor Vehicle Safety Act. Mercedes-Benz AG (“MBAG”), the manufacturer of Freightliner Sprinter vans, has determined that a defect which relates to motor vehicle safety exists in certain Model Year (“MY”) 2019-2022 Freightliner Sprinter vehicles. Our records indicate that your vehicle is included in the affected population of vehicles. What is the issue? A component of the vehicle’s park lock system might fatigue, which can cause the parking pawl not to engage and result in a vehicle rollaway. This may increase the risk of a crash. Daimler Vans USA reminds drivers to always follow the parking instructions in the vehicle’s Operator’s Manual, including setting the manual parking brake. What will your Freightliner Dealer do? An authorized Freightliner Sprinter dealer will update the software of various control units (Direct Select Module, Electronic Ignition Switch Module, Electronic Stability Program Module, and Transmission Control Unit) on the affected vehicles, free of charge. The repair will take approximately 1 hour. Steps to take. For additional information and to schedule an appointment, please contact your preferred authorized Freightliner Sprinter dealer at your earliest convenience. To locate authorized dealers see https://www.mbvans.com/en/dealers. Please mention you are scheduling an appointment to update the park lock function under Recall Campaign # You may be asked for your 17-digit Vehicle Identification Number (VIN) which for your convenience is located above your name at the top of this letter. If this is a leased vehicle and the lessor and registered owner receive this notice, please forward this information by first class mail to the lessee within 10 business days to comply with Federal Regulations. A VIN-based recall lookup tool on our website now offers a search feature that will indicate whether a vehicle has been subject to a safety recall, and whether that vehicle has had the free remedy performed. See https://www.freightlinersprinterusa.com/en/recall-information Should you have any questions, please contact your authorized Freightliner Sprinter dealer. We apologize for any inconvenience this may have caused and look forward to taking care of this important safety issue immediately. Sincerely, Daimler Vans USA • A remedy is available for your vehicle. • Schedule an appointment with your authorized Freightliner dealer as soon as possible. • This repair will be provided free of charge. IMPORTANT SAFETY RECALL Daimler Vans USA, LLC One Mercedes-Benz Drive Sandy Springs, GA 30328 Phone: (770) 705-0600 Additional Information for Owners: If an authorized Freightliner Sprinter dealer for any reason is unable to remedy the situation without charge, or within a reasonable amount of time, pursuant to law 49 U.S.C. Chapter 301, you may submit a complaint to the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Avenue, S.E., Washington, D.C. 20590 or call the toll-free Auto Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153); or go to https://www.safercar.gov. IMPORTANT If for any reason YOU NO LONGER OWN THIS VEHICLE OR have a CHANGE OF ADDRESS, please COMPLETE THE SECTION BELOW, place in the ENCLOSED ENVELOPE, and DROP IN ANY MAIL BOX. If possible, provide the name and address of the present owner so that we may contact them. ❑ EXPORTED ❑ LEASE, VEHICLE RETURNED ❑ SCRAPPED ❑ SOLD ❑ STOLEN ❑ OTHER _________________________ ❑ NEW OWNER INFORMATION OR ❑ MY NEW NAME OR ADDRESS IS: Last Name, First Name Street Apt City State ZIP Email Address Phone (numbers only) Mobile (numbers only) ———————————————– ———————————————————————————- Date Signature **** PLEASE DO NOT DETACH. RETURN COMPLETE LETTER **** DO NOT USE THE ENCLOSED ENVELOPE FOR OTHER CORRESPONDENCE VIN: IMPORTANT SAFETY RECALL Daimler Vans USA, LLC One Mercedes-Benz Drive Sandy Springs, GA 30328 Phone: (770) 705-0600 Reimbursement to Customers for Repairs Performed Prior to Recall If you have already paid to have this recall condition corrected, you may be eligible to receive reimbursement. Requests for reimbursement may include parts, labor, fees and taxes. Reimbursement may be limited to the amount the repair would have cost if completed by an authorized Mercedes-Benz dealer. The following documentation must be presented to your dealer for reimbursement. Original or clear copy of all receipts, invoices and/or repair orders that show: • The name and address of the person who paid for the repair. • The Vehicle Identification Number (VIN) of the vehicle that was repaired. • What problem occurred, what repair was done, when it was done and who repaired it. • The total cost of the repair expense that is being claimed. • Proof of payment of repair (copy of front and back of cancelled check or copy of credit card receipt). • Reimbursement will be made by check from your dealer. If your claim is denied you will receive a letter from MBUSA within 60 days of receipt with the reason(s) for the denial. IMPORTANT SAFETY RECALL Daimler Vans USA, LLC One Mercedes-Benz Drive Sandy Springs, GA 30328 Phone: (770) 705-0600

**************************************************************************************************************

Daimler Vans USA, LLC A Daimler AG Company One Mercedes-Benz Drive Sandy Springs, GA 30328 770.705.0600 News Channel Update | Vans Customer Service and Parts Internal TO: Freightliner Principals, General Managers, Sales Managers, Service Managers, Parts Managers FROM: Anthony Washington, Department Manager, Regulations and Certifications Re: Initial Recall Campaign Notification Model 907 (Sprinter) Model Years 2019-2022 Update Park Lock Function (Software Update) DATE: November, 2022 IMPORTANT RECALL CAMPAIGN INFORMATION Please see the attached documents related to the campaign listed above Daimler Vans USA, LLC A Daimler AG Company One Mercedes-Benz Drive Sandy Springs, GA 30328 770.705.0600 News Channel Update | Vans Customer Service and Parts Internal Campaign No. : Campaign Desc. : Update Park Lock Function 2022100017 2022100018 2022100019 PDV2790611 PDV2790612 PDV2790613 This is to notify you of an initial Recall Campaign to update the park lock function on approximately 5,573 MY19-22 Freightliner Sprinter vans. The recall campaign will be visible on the www.safercar.gov website and may generate questions from customers. All affected VINs will be flagged as “PENDING” in VMI and cannot be sold. Background Issue Mercedes-Benz AG (MBAG), the manufacturer of Freightliner Sprinter Vans has determined that on certain Sprinter (907 platform) vehicles, a component of the park lock system might wear due to specific driver parking practices and impair the safe parking of the vehicle. If the vehicle is not properly secured in accordance with parking instructions in the operator’s manual (including usage of the parking brake), it cannot be ruled out that the vehicle might roll away from its parked position under certain circumstances. Thus, the risk of an accident could increase. What We’re Doing DVUSA is conducting a voluntary recall. An authorized Freightliner Sprinter dealer will update the software of various control units (among others ESP and transmission control unit) on the affected vehicles. Parts The remedy is not yet available Vehicles Affected Vehicle Model Year(s) Model Year 2019-2022 Vehicle Model Sprinter VS30, Platform 907 Vehicle Populations Total Recall Population 5,573 Given this notice, it is a violation of Federal Law for a dealer to sell or lease any new Sprinter vehicles in dealer inventory covered by this notification until the vehicle has been repaired. Loaner and demonstrator vehicles may continue to be driven, but must not be retailed until repaired. Additionally, given this notice, it is a violation of Federal Law for rental companies to rent new Sprinter vehicles covered by this notification until the vehicle has been repaired. Next Steps/Notes Customer Notification Timeline An owner notification letter to be mailed in November, 2022. AOMS/SOMS AOMs – This recall may generate questions from your dealers. Please forward this notice to your dealers ASAP. Rental Fleet Partners This recall may affect vehicles in your fleet. Please contact your respective DVUSA fleet representative for further information and next steps. For repairs, please contact your preferred DVUSA dealer. While we regret any inconvenience this may cause, we are determined to maintain a high level of vehicle quality and customer satisfaction. Daimler Vans USA, LLC A Daimler AG Company One Mercedes-Benz Drive Sandy Springs, GA 30328 770.705.0600 News Channel Update | Vans Customer Service and Parts Internal Frequently Asked Questions 1. What is the issue? A component of the park lock system might wear due to specific driver parking practices and could then impair a safe parking of the vehicle. 2. What vehicles are impacted? All 907 Sprinters with a manual parking brake and 7-speed automatic transmission. 3. What does the fix look like? The software of various control units (among others ESP and transmission control unit) will be updated on the affected vehicles. 4. How does this issue impact vehicles currently at the plant or VPC or in transit to the United States? These units are affected as well, but have been segregated into a different population. 5. When will the fix be available for units currently in dealer inventory? The fix for vehicles in dealer inventory is anticipated to be available in Q1 2023.

**************************************************************************************************************

Daimler Vans USA, LLC A Mercedes-Benz AG Company One Mercedes-Benz Drive Sandy Springs, GA 30328 770.705.0600 News Channel Update | Vans Customer Service and Parts Internal TO: Freightliner Principals, General Managers, Sales Managers, Service Managers, Parts Managers FROM: Anthony Washington, Department Manager, Regulations and Certifications Re: Recall Campaign Launch Notification Model 907 (Sprinter) Model Years 2019-2022 Update Park Lock Function (Software Update) DATE: December, 2022 IMPORTANT RECALL CAMPAIGN INFORMATION Please see the attached documents related to the campaign listed above Work instructions are listed in sequence Scroll down for applicable campaign Daimler Vans USA, LLC A Mercedes-Benz AG Company One Mercedes-Benz Drive Sandy Springs, GA 30328 770.705.0600 News Channel Update | Vans Customer Service and Parts Internal Campaign No. : Campaign Desc. : 2022120008 Update Park Lock Function 2022120007 2022120006 22V2790611 22V2790612 22V2790613 This is to notify you of a Recall Campaign Launch to update the park lock function on approximately 5,555 MY19-22 Freightliner Sprinter vans. The recall campaign will be visible on the www.safercar.gov website and may generate questions from customers. All affected VINs will be flagged as “OPEN” in VMI and cannot be sold until repaired. Background Issue Mercedes-Benz AG (MBAG), the manufacturer of Freightliner Sprinter Vans has determined that on certain Sprinter (907 platform) vehicles, a component of the park lock system might wear due to specific driver parking practices and impair the safe parking of the vehicle. If the vehicle is not properly secured in accordance with parking instructions in the operator’s manual (including usage of the parking brake), it cannot be ruled out that the vehicle might roll away from its parked position under certain circumstances. Thus, the risk of an accident could increase. What We’re Doing DVUSA is conducting a voluntary recall. An authorized Freightliner Sprinter dealer will update the software of various control units (Direct Select Module, Electronic Ignition Switch Module, Electronic Stability Program Module, and Transmission Control Unit) on the affected vehicles. Remedy The Software is available Vehicles Affected Vehicle Model Year(s) Model Year 2019-2022 Vehicle Model Sprinter VS30, Platform 907 Vehicle Populations Total Recall Population 5,555 Given this notice, it is a violation of Federal Law for a dealer to sell or lease any new Sprinter vehicles in dealer inventory covered by this notification until the vehicle has been repaired. Loaner and demonstrator vehicles may continue to be driven, but must not be retailed until repaired. Additionally, given this notice, it is a violation of Federal Law for rental companies to rent new Sprinter vehicles covered by this notification until the vehicle has been repaired. Next Steps/Notes Customer Notification Timeline An owner notification letter to be mailed in end of January, 2023 AOMS/SOMS AOMs – This recall may generate questions from your dealers. Please forward this notice to your dealers ASAP. Rental Fleet Partners This recall may affect vehicles in your fleet. Please contact your respective DVUSA fleet representative for further information and next steps. For repairs, please contact your preferred DVUSA dealer. While we regret any inconvenience this may cause, we are determined to maintain a high level of vehicle quality and customer satisfaction. V-RC-2019050017 Campaign No. December, 2022 2022120008 – 22V2790611 TO: SUBJECT: ALL FREIGHTLINER CENTERS Model 907 Sprinter, Model Year 2019-2022 Update Park Lock Function (software update) Mercedes-Benz AG (MBAG), the manufacturer of Freightliner Sprinter Vans, has determined that on certain Sprinter (907 platform) vehicles, a component of the park lock system might wear due to specific driver parking practices and impair the safe parking of the vehicle. If the vehicle is not properly secured in accordance with parking instructions in the operator’s manual (including usage of the parking brake), it cannot be ruled out that the vehicle might roll away from its parked position under certain circumstances. Thus, the risk of an accident could increase. DVUSA is conducting a voluntary recall. An authorized Freightliner Sprinter dealer will update the software of various control units (Direct Select Module, Electronic Ignition Switch Module, Electronic Stability Program Module, and Transmission Control Unit) on the affected vehicles. n: Prior to performing the campaign: • Please check VMI to determine if the vehicle is involved in the Campaign and if it has been previously repaired. • Please review the entire Recall Campaign bulletin and follow the repair procedure exactly as described. Please note that Recall Campaigns do not expire and may also be performed on a vehicle with a vehicle status indicator. Approximately 5,553 vehicles are involved. Order No. V-RC-2022120008 This bulletin has been created and maintained in accordance with MBUSA-SLP S423QH001, Document and Data Control, and MBUSASLP S424HH001, Control of Quality Records. Van Group 27 CODE: 22V2790611 SM27.19-D-0041SG 15.12.2022 Update control unit software (code: 22V2790611, acc. no.: 27 906 11) Model 907 with transmission 722.9 Work instructions © 2022 by Mercedes-Benz AG Printed in Germany This document, including all its parts, is protected by copyright. Any further processing or use requires the previous written consent of Mercedes- Benz AG, Department GSP/OR, D-70546 Stuttgart. This applies in particular to reproduction, distribution, alteration, translation, microfilming and storage and/or processing in electronic systems, including databases and online services. SM27.19-D-0041SG Update control unit software (code: 22V2790611, acc. no.: 27 906 11) Model 907 with transmission 722.9 Operation no. of the operation texts or standard texts and flat rates Category Op. no. Operation text Time Damage Code Code L 02 2443 Operations: Connect/disconnect diagnostic system 0.1 hr 27 906 11 22V2790611 L 02 2445 Operations: Connect/disconnect charger (vehicle diagnosis system connected) 0.1 hr 27 906 11 22V2790611 L 02 2442 Operations: Update ………….. control unit software (vehicle diagnosis system connected) 0.1 hr 27 906 11 22V2790611 Important! Automated procedure – up to five (5) control units are updated. Notes on programming control units AH54.21-P-0001-03Z g Check 1 Check whether vehicle is affected by measure. Update software 2 Connect charging equipment. f Maintaining on-board electrical system voltage when performing test and diagnosis work on vehicle AR54.10-D-1127TS p During the entire work procedure a sufficiently large voltage supply must be provided for the vehicle’s on-board electrical system. Otherwise any undervoltage that occurs may damage the control units. i Follow the operating instructions for the charger. i Use the charger to ensure that an adequate power supply (min. 12.5 V) is provided for the onboard electrical system battery. Update control unit software (code: 22V2790611, acc. no.: 27 906 11) SM27.19-D-0041SG V-RC-2022120008 1 3 Connect diagnostic system. a AD00.00-D-2000-06TS i Always use the latest XENTRY Diagnosis software release with all available add-ons. i It is absolutely essential to precisely follow the operation steps as described in the vehicle diagnosis system. 4 Update automatic transmission control unit software. i The operation steps must be performed exactly as per XENTRY Diagnosis. Automated procedure – up to five (5) control units are updated. 5 Disconnect diagnostic system. a AD00.00-D-2000-06TS 6 Remove charger from vehicle. f AR54.10-D-1127TS SM27.19-D-0041SG Update control unit software (code: 22V2790611, acc. no.: 27 906 11) 2 V-RC-2022120008 V-RC-2019050017 Campaign No. December, 2022 2022120007 – 22V2790612 TO: SUBJECT: ALL FREIGHTLINER CENTERS Model 907 Sprinter, Model Year 2019-2022 Update Park Lock Function (software update) Mercedes-Benz AG (MBAG), the manufacturer of Freightliner Sprinter Vans, has determined that on certain Sprinter (907 platform) vehicles, a component of the park lock system might wear due to specific driver parking practices and impair the safe parking of the vehicle. If the vehicle is not properly secured in accordance with parking instructions in the operator’s manual (including usage of the parking brake), it cannot be ruled out that the vehicle might roll away from its parked position under certain circumstances. Thus, the risk of an accident could increase. DVUSA is conducting a voluntary recall. An authorized Freightliner Sprinter dealer will update the software of various control units (Direct Select Module, Electronic Ignition Switch Module, Electronic Stability Program Module, and Transmission Control Unit) on the affected vehicles. Prior to performing the campaign: • Please check VMI to determine if the vehicle is involved in the Campaign and if it has been previously repaired. • Please review the entire Recall Campaign bulletin and follow the repair procedure exactly as described. Please note that Recall Campaigns do not expire and may also be performed on a vehicle with a vehicle status indicator. Approximately 5,553 vehicles are involved. Order No. V-RC-2022120007 This bulletin has been created and maintained in accordance with MBUSA-SLP S423QH001, Document and Data Control, and MBUSASLP S424HH001, Control of Quality Records. Van Group 27 CODE: 22V2790612 SM27.19-D-0042SG 15.12.2022 Update control unit software (code: 22V2790612, acc. no.: 27 906 12) Model 907 with transmission 722.9 Work instructions © 2022 by Mercedes-Benz AG Printed in Germany This document, including all its parts, is protected by copyright. Any further processing or use requires the previous written consent of Mercedes- Benz AG, Department GSP/OR, D-70546 Stuttgart. This applies in particular to reproduction, distribution, alteration, translation, microfilming and storage and/or processing in electronic systems, including databases and online services. SM27.19-D-0042SG Update control unit software (code: 22V2790612, acc. no.: 27 906 12) Model 907 with transmission 722.9 Operation no. of the operation texts or standard texts and flat rates Category Op. no. Operation text Time Damage Code Code L 02 2443 Operations: Connect/disconnect diagnostic system 0.1 hr 27 906 12 22V2790612 L 02 2445 Operations: Connect/disconnect charger (vehicle diagnosis system connected) 0.1 hr 27 906 12 22V2790612 L 02 2442 Operations: Update ………….. control unit software (vehicle diagnosis system connected) 0.1 hr 27 906 12 22V2790612 Important! Automated procedure – up to five (5) control units are updated. Notes on programming control units AH54.21-P-0001-03Z g Check 1 Check whether vehicle is affected by measure. Update software 2 Connect charging equipment. f Maintaining on-board electrical system voltage when performing test and diagnosis work on vehicle AR54.10-D-1127TS p During the entire work procedure a sufficiently large voltage supply must be provided for the vehicle’s on-board electrical system. Otherwise any undervoltage that occurs may damage the control units. i Follow the operating instructions for the charger. i Use the charger to ensure that an adequate power supply (min. 12.5 V) is provided for the onboard electrical system battery. Update control unit software (code: 22V2790612, acc. no.: 27 906 12) SM27.19-D-0042SG V-RC-2022120007 1 3 Connect diagnostic system. a AD00.00-D-2000-06TS i Always use the latest XENTRY Diagnosis software release with all available add-ons. i It is absolutely essential to precisely follow the operation steps as described in the vehicle diagnosis system. 4 Update automatic transmission control unit software. i The operation steps must be performed exactly as per XENTRY Diagnosis. Automated procedure – up to five (5) control units are updated. 5 Disconnect diagnostic system. a AD00.00-D-2000-06TS 6 Remove charger from vehicle. f AR54.10-D-1127TS SM27.19-D-0042SG Update control unit software (code: 22V2790612, acc. no.: 27 906 12) 2 V-RC-2022120007 V-RC-2019050017 Campaign No. December, 2022 2022120006 – 22V2790613 TO: SUBJECT: ALL FREIGHTLINER CENTERS Model 907 Sprinter, Model Year 2019-2022 Update Park Lock Function (software update) Mercedes-Benz AG (MBAG), the manufacturer of Freightliner Sprinter Vans, has determined that on certain Sprinter (907 platform) vehicles, a component of the park lock system might wear due to specific driver parking practices and impair the safe parking of the vehicle. If the vehicle is not properly secured in accordance with parking instructions in the operator’s manual (including usage of the parking brake), it cannot be ruled out that the vehicle might roll away from its parked position under certain circumstances. Thus, the risk of an accident could increase. DVUSA is conducting a voluntary recall. An authorized Freightliner Sprinter dealer will update the software of various control units (Direct Select Module, Electronic Ignition Switch Module, Electronic Stability Program Module, and Transmission Control Unit) on the affected vehicles. n: Prior to performing the campaign: • Please check VMI to determine if the vehicle is involved in the Campaign and if it has been previously repaired. • Please review the entire Recall Campaign bulletin and follow the repair procedure exactly as described. Please note that Recall Campaigns do not expire and may also be performed on a vehicle with a vehicle status indicator. Approximately 5,553 vehicles are involved. Order No. V-RC-2022120006 This bulletin has been created and maintained in accordance with MBUSA-SLP S423QH001, Document and Data Control, and MBUSASLP S424HH001, Control of Quality Records. Van Group 27 CODE: 22V2790613 SM27.19-D-0043SG 15.12.2022 Update control unit software (code: 22V2790613, acc. no.: 27 906 13) Model 907 with transmission 722.9 Work instructions © 2022 by Mercedes-Benz AG Printed in Germany This document, including all its parts, is protected by copyright. Any further processing or use requires the previous written consent of Mercedes- Benz AG, Department GSP/OR, D-70546 Stuttgart. This applies in particular to reproduction, distribution, alteration, translation, microfilming and storage and/or processing in electronic systems, including databases and online services. SM27.19-D-0043SG Update control unit software (code: 22V2790613, acc. no.: 27 906 13) Model 907 with transmission 722.9 Operation no. of the operation texts or standard texts and flat rates Category Op. no. Operation text Time Damage Code Code L 02 2443 Operations: Connect/disconnect diagnostic system 0.1 hr 27 906 13 22V2790613 L 02 2445 Operations: Connect/disconnect charger (vehicle diagnosis system connected) 0.1 hr 27 906 13 22V2790613 L 02 2442 Operations: Update ………….. control unit software (vehicle diagnosis system connected) 0.1 hr 27 906 13 22V2790613 Important! Automated procedure – up to five (5) control units are updated. Notes on programming control units AH54.21-P-0001-03Z g Check 1 Check whether vehicle is affected by measure. Update software 2 Connect charging equipment. f Maintaining on-board electrical system voltage when performing test and diagnosis work on vehicle AR54.10-D-1127TS p During the entire work procedure a sufficiently large voltage supply must be provided for the vehicle’s on-board electrical system. Otherwise any undervoltage that occurs may damage the control units. i Follow the operating instructions for the charger. i Use the charger to ensure that an adequate power supply (min. 12.5 V) is provided for the onboard electrical system battery. Update control unit software (code: 22V2790613, acc. no.: 27 906 13) SM27.19-D-0043SG V-RC-2022120006 1 3 Connect diagnostic system. a AD00.00-D-2000-06TS i Always use the latest XENTRY Diagnosis software release with all available add-ons. i It is absolutely essential to precisely follow the operation steps as described in the vehicle diagnosis system. 4 Update automatic transmission control unit software. i The operation steps must be performed exactly as per XENTRY Diagnosis. Automated procedure – up to five (5) control units are updated. 5 Disconnect diagnostic system. a AD00.00-D-2000-06TS 6 Remove charger from vehicle. f AR54.10-D-1127TS SM27.19-D-0043SG Update control unit software (code: 22V2790613, acc. no.: 27 906 13) 2 V-RC-2022120006

**************************************************************************************************************

**************************************************************************************************************

**************************************************************************************************************

SEOCONTENT-END