Axle May Crack and Separate – 2022 HD Trailer Non CDL Gooseneck Trailers

“This site contains affiliate links for which OEMDTC may be compensated”

October 14, 2022 NHTSA CAMPAIGN NUMBER: 22V777000

Axle May Crack and Separate

Cracking or separation of the axle and spindle can increase the risk of a crash.

 

NHTSA Campaign Number: 22V777

Manufacturer HD Trailer MFG. LLC

Components SUSPENSION

Potential Number of Units Affected 15

 

Summary

HD Trailer MFG, LLC (HD Trailer) is recalling certain 2022 Non CDL Gooseneck trailers equipped with Besser Pro 7000 lbs. Tubular Straight Axle assemblies. The weld that joins the spindle and the main axle may have been improperly placed, which can cause cracking or separation of the axle from the spindle.

 

Remedy

Dealers will inspect the axle serial numbers, and replace the axles as necessary, free of charge. Owner notification letters were mailed on February 21, 2023. Owners may contact HD Trailer’s customer service at 1-903-491-6759.

 

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.

 


HD TRAILER MFG, LLC has decided that a defect, which relates to motor vehicle safety, exists in ce1iain 102’x40″ Mega ramp/2022/NON-CDL GOOSENECK trailers.

 

WHY DOES MY TRAILER NEED REPAIRS?

The 7K besser pro axles may break due an improper weld on the axle tube, increasing the risk of a crash without prior warning.

 

WHATWIIL YOURDEALEROO?

Your dealer will replace the defective axle, free of charge. The repair should take approximately 8 hours to complete. However, due to scheduling, your dealer may require your trailer for longer. Your dealer should be able to provide a more accurate repair estimate.

 

WHAT SHOULD YOU DO?

Please contact your local authorized dealer and schedule an appointment for your free repair as soon as possible. To find your nearest dealer, contact us directly.

 

WHO SHOULD YOU CONTACT WITH FURTHER QUESTIONS OR CONCERNS?

If you have questions or concerns about this recall, please contact HD TRAILER MFG at 903-491-6759.

 


Chronology :

We were contacted by our Besser Pro sales rep on 07/23/2022 letting us know that they were having issues with their 7K axles due to a defective weld on the tube of the axle that connects to the spindle. This was the 7K 78HF 54SC axles. HD Trailer recall was October 2022

 


22E059 – Axle May Crack and Separate – Besser Pro 7000 lb Tubular Straight Axle

 

22E059 – Axle May Crack and Separate – Besser Pro 7000 lb Tubular Straight Axle

 


1 Affected Product

Vehicle

MAKE MODEL YEAR
HD TRAILER NON CDL GOOSENECKS 2022

 


5 Associated Documents

Recall Acknowledgement

RCAK-22V777-4496.pdf 647.072KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [631.91 KB]

 


Defect Notice 573 Report

RCLRPT-22V777-9155.PDF 212.708KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [207.72 KB]

 


Owner Notification Letter(Part 577)

RCONL-22V777-6064.pdf 185.092KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [180.75 KB]

 


Recall Quarterly Report #1, 2023-1

RCLQRT-22V777-6210.PDF 211.12KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [206.17 KB]

 


Recall 573 Report – 05/22/2023

RCLRPT-22V777-2107.PDF 212.732KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [207.75 KB]

 


Latest Recalls Documents

For the Latest and Most Recent Recalls Information Visit the link below…

https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=22V777&docType=RCL

 


 

“This site contains affiliate links for which OEMDTC may be compensated”
Bestseller No. 1
The Trailer Parts Outlet - 3.5k TK Trailer Axle - 3500 lb Idler 5 Lug - Dexter Compatible, 61/46 Hubface/Spring Center - (4'0) Frame Width / 5x4.5 Bolt Pattern
  • Specs: 3,500 lbs Idler Trailer Axle (Capacity 3.5K), 5 Lug, Tube: 2 3/8"
  • High Strength Straight Steel Axle Tube
  • Axle comes fully assembled, so all you'll have to do is attach the springs, the U-bolt kits, and the tire and wheel assemblies.
  • Underslung - Spring seats are welded to the bottom of the axle, which allows for a lower ride height.
  • Trailer Axle Design for use on Light Duty Trailers
Bestseller No. 2
The Trailer Parts Outlet - 2k TK Trailer Axle - 2000 lb Idler, 61/46 Hubface/Spring Center - (4'0) Frame Width / 4x4 Bolt Pattern
  • EZ Lube Design Removable rubber plug on the hub cap with easy access to a grease-able zerk fitting Grease your axle without pulling off your whole entire hub
  • Internal Wiring System To ensure seamless design Protect brake wires from wear and tear
  • High Strength Straight Steel Axle Tube Construction to ensure Even Tire Wear A better highway experience
  • Underslung - Axle is welded with spring seats on the bottom Allows for lower ride height For optimal usage, use with double eye springs
Bestseller No. 3
LCI Lippert 3,500LB Straight Idler Trailer Axle 72HF 58SC
  • 72" from Hubface to Hubface and 58" Spring Center to Spring Center.
  • Springs are 25 1/4" long and 1 3/4" wide
  • 4 Leaf Springs
  • 2-3/8" Main Tube
  • 5 Lug with a 4 1/2" bolt pattern. 1/2 lug studs.
Bestseller No. 4
The Trailer Parts Outlet - 2k TK Trailer Axle - 2000 lb Idler, 71/58 Hubface/Spring Center - (5'0) Frame Width / 5x4.5 Bolt Pattern
  • Capacity: 2000 lbs, Tube:1-3/4 | 5x4.5 Bolt Pattern
  • EZ Lube Design: Removable rubber plug on the hub cap with easy access to a grease-able zerk fitting. Grease your axle without pulling off your whole entire hub.
  • Internal Wiring System: To ensure seamless design and protect brake wires from wear and tear.
  • High Strength Straight Steel Axle Tube Construction: To ensure even tire wear and a better highway experience.
  • Underslung - Axle is welded with spring seats on the bottom: Allows for lower ride height. For optimal usage, use with double eye springs.
Bestseller No. 5
TK Axles + 3.5k-3500 Lb Capacity Trailer Idler Straight Axle - 5 on 4.5 Bolt Pattern (Assembled Idler Axle, 73" Hubface-58 Spring Center(5'0Frame))
  • Completely DEXTER Compatible; Half the Price
  • Capacity: 3500 lbs
  • Option to Add Spring and Ubolt Kits Needed to Hang Your Axle
  • Tube: 2 3/8"; EZ Lube Design
  • Underslung: Axle is welded with Spring Seats on the Bottom
Bestseller No. 6
The Trailer Parts Outlet - 3.5k TK Trailer Axle - (3500 lb Beam Only), 95/80 Hubface/Spring Center - (6'10) Frame Width for Utility/ATV/Boat/Cargo
  • Versatile Design - Compatible for use on Medium Duty Trailers Utility, Boat, Car Haulers, ATV, Lawn & Landscape, Flatbed, Livestock, Cargo, Enclosed, RV Trailers, Dump, Lowboy, Flatbed Trailers and more
  • EZ Lube design for effortless maintenance - grease your axle without removing the whole hub assembly
  • Underslung - Our trailer axle beam is welded with spring seats on the bottom Allows for lower ride height, for optimal usage, use with double eye springs
  • High-Strength Construction - Made with straight steel axle tube to ensure even tire wear and a better highway experience
  • Easy Installation - Simply pair with double eye springs for optimal usage and get your trailer back on the road in no time
Bestseller No. 7
The Trailer Parts Outlet - 3.5k TK Trailer Axle - 3500 lb Idler 5 Lug - Dexter Compatible, 89/74 Hubface/Spring Center - (6'4) Frame Width / 5x5 Bolt Pattern
  • Specs: 3,500 lbs Idler Trailer Axle (Capacity 3.5K), 5 Lug, Tube: 2 3/8"
  • High Strength Straight Steel Axle Tube
  • Axle comes fully assembled, so all you'll have to do is attach the springs, the U-bolt kits, and the tire and wheel assemblies.
  • Underslung - Spring seats are welded to the bottom of the axle, which allows for a lower ride height.
  • Trailer Axle Design for use on Light Duty Trailers
Bestseller No. 8
RIGID HITCH INCORPORATED 2,000 lb. Torsional Stub Axles with 5-Bolt on 4-1/2 Inch Hubs (TSA-20150)
  • 2,000 lbs capacity
  • Stub axles can be bolted (hardware not included) or welded to trailer frame
  • 45 degree downward starting angle
  • Perfect item to easily build your own custom motorcycle trailer
  • Read product description below for more detailed information.
Bestseller No. 9
The Trailer Parts Outlet - 6k TK Trailer Axle - 6000 lb Idler 6 Lug, 85/70 Hubface/Spring Center - (6'0) Frame Width / 6x5.5 Bolt Pattern
  • 6,000 lbs TK Trailer Axle (6K Capacity), Tube: 3", Bolt Pattern: 6x5.5
  • Axles come fully assembled - Packed with High-Temp Axle Grease
  • High Strength Steel Axle Tube Construction to ensure
  • Designed for use on Light Duty Trailers
Bestseller No. 10
LCI Lippert 3,500LB Straight Idler Trailer Axle 60HF 48SC
  • 60" from Hubface to Hubface and 48" Spring Center to Spring Center.
  • Springs are 25 1/4" long and 1 3/4" wide.
  • 4 Leaf Springs
  • 2-3/8" Main Tube
  • 5 Lug with a 4 1/2" bolt pattern. 1/2 lug studs.

Last update on 2024-04-12 / Affiliate links / Images from Amazon Product Advertising API

This product presentation was made with AAWP plugin.

 


Leave a Comment

Share to...