Incorrectly Labeled GAWR – 2021-2023 Bwise EA10-10 & EA10-12 All Access Trailers

“This site contains affiliate links for which OEMDTC may be compensated”

August 5, 2022 NHTSA CAMPAIGN NUMBER: 22V587000

Incorrectly Labeled GAWR/Part 567

An incorrect label may lead to unintentionally overloading the vehicle, increasing the risk of a crash.

 

NHTSA Campaign Number: 22V587

Manufacturer Bwise Manufacturing

Components EQUIPMENT

Potential Number of Units Affected 76

 

Summary

Bwise Manufacturing (Bwise) is recalling certain 2021-2023 EA10-10 and EA10-12 All Access trailers. The GAWR of the trailer was incorrectly labeled at 4,995 lbs. and should be labeled 6,000lbs. As such, these vehicles fail to comply with the requirements of 49 CFR Part number 567, “Certification.”

 

Remedy

Dealers will mail new labels and instructions on how to replace it, free of charge. Owner notification letters were mailed on September 6, 2022. Owners may contact Bwise’s customer service at 1-717-261-0922.

 

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.

 


Chronology :

Incorrect data entry caused a misprint on the VIN labels. The error was discovered during a routine audit on June 30, 2022 and corrected. There is only one dealer who received all 76 units that were affected. They were contacted immediately by telephone and provided replacement labels for the 18 trailers still in their possession. After review and consideration of the accuracy of the labels, it was determined that a recall would be the most prudent course of action to get all incorrect labels replaced for the customers. There have been no reported warranty claims or customer complaints related to the misprinted labels.

 


3 Affected Products

Vehicle

MAKE MODEL YEAR
BWISE DUMP TRAILER 2021-2023

 


7 Associated Documents

Recall Acknowledgement

RCAK-22V587-7203.pdf 646.333KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [631.18 KB]

 


Non-Compliance Notice 573 Report

RCLRPT-22V587-8655.PDF 213.341KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [208.34 KB]

 


Recall 573 Report- 08/22/2022

RCLRPT-22V587-2433.PDF 213.685KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [208.68 KB]

 


ISSUED Owner Notification Letter(Part 577)

RCONL-22V587-1905.pdf 347.874KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [339.72 KB]

 


Recall Quarterly Report #1, 2022-3

RCLQRT-22V587-2130.PDF 211.116KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [206.17 KB]

 


Recall Quarterly Report #2, 2022-4

RCLQRT-22V587-9828.PDF 211.217KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [206.27 KB]

 


Recall Quarterly Report #3, 2023-1

RCLQRT-22V587-5242.PDF 211.295KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [206.34 KB]

 


Latest Recalls Documents

For the Latest and Most Recent Recalls Information Visit the link below…

https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=22V587&docType=RCL

 


 

“This site contains affiliate links for which OEMDTC may be compensated”
Bestseller No. 1
The Trailer Parts Outlet - 3.5k TK Trailer Axle - 3500 lb Idler 5 Lug - Dexter Compatible, 61/46 Hubface/Spring Center - (4'0) Frame Width / 5x4.5 Bolt Pattern
  • Specs: 3,500 lbs Idler Trailer Axle (Capacity 3.5K), 5 Lug, Tube: 2 3/8"
  • High Strength Straight Steel Axle Tube
  • Axle comes fully assembled, so all you'll have to do is attach the springs, the U-bolt kits, and the tire and wheel assemblies.
  • Underslung - Spring seats are welded to the bottom of the axle, which allows for a lower ride height.
  • Trailer Axle Design for use on Light Duty Trailers
Bestseller No. 2
The Trailer Parts Outlet - 2k TK Trailer Axle - 2000 lb Idler, 61/46 Hubface/Spring Center - (4'0) Frame Width / 4x4 Bolt Pattern
  • EZ Lube Design Removable rubber plug on the hub cap with easy access to a grease-able zerk fitting Grease your axle without pulling off your whole entire hub
  • Internal Wiring System To ensure seamless design Protect brake wires from wear and tear
  • High Strength Straight Steel Axle Tube Construction to ensure Even Tire Wear A better highway experience
  • Underslung - Axle is welded with spring seats on the bottom Allows for lower ride height For optimal usage, use with double eye springs
Bestseller No. 3
LCI Lippert 3,500LB Straight Idler Trailer Axle 72HF 58SC
  • 72" from Hubface to Hubface and 58" Spring Center to Spring Center.
  • Springs are 25 1/4" long and 1 3/4" wide
  • 4 Leaf Springs
  • 2-3/8" Main Tube
  • 5 Lug with a 4 1/2" bolt pattern. 1/2 lug studs.
Bestseller No. 4
The Trailer Parts Outlet - 2k TK Trailer Axle - 2000 lb Idler, 71/58 Hubface/Spring Center - (5'0) Frame Width / 5x4.5 Bolt Pattern
  • Capacity: 2000 lbs, Tube:1-3/4 | 5x4.5 Bolt Pattern
  • EZ Lube Design: Removable rubber plug on the hub cap with easy access to a grease-able zerk fitting. Grease your axle without pulling off your whole entire hub.
  • Internal Wiring System: To ensure seamless design and protect brake wires from wear and tear.
  • High Strength Straight Steel Axle Tube Construction: To ensure even tire wear and a better highway experience.
  • Underslung - Axle is welded with spring seats on the bottom: Allows for lower ride height. For optimal usage, use with double eye springs.
Bestseller No. 5
TK Axles + 3.5k-3500 Lb Capacity Trailer Idler Straight Axle - 5 on 4.5 Bolt Pattern (Assembled Idler Axle, 73" Hubface-58 Spring Center(5'0Frame))
  • Completely DEXTER Compatible; Half the Price
  • Capacity: 3500 lbs
  • Option to Add Spring and Ubolt Kits Needed to Hang Your Axle
  • Tube: 2 3/8"; EZ Lube Design
  • Underslung: Axle is welded with Spring Seats on the Bottom
Bestseller No. 6
The Trailer Parts Outlet - 3.5k TK Trailer Axle - (3500 lb Beam Only), 95/80 Hubface/Spring Center - (6'10) Frame Width for Utility/ATV/Boat/Cargo
  • Versatile Design - Compatible for use on Medium Duty Trailers Utility, Boat, Car Haulers, ATV, Lawn & Landscape, Flatbed, Livestock, Cargo, Enclosed, RV Trailers, Dump, Lowboy, Flatbed Trailers and more
  • EZ Lube design for effortless maintenance - grease your axle without removing the whole hub assembly
  • Underslung - Our trailer axle beam is welded with spring seats on the bottom Allows for lower ride height, for optimal usage, use with double eye springs
  • High-Strength Construction - Made with straight steel axle tube to ensure even tire wear and a better highway experience
  • Easy Installation - Simply pair with double eye springs for optimal usage and get your trailer back on the road in no time
Bestseller No. 7
The Trailer Parts Outlet - 3.5k TK Trailer Axle - 3500 lb Idler 5 Lug - Dexter Compatible, 89/74 Hubface/Spring Center - (6'4) Frame Width / 5x5 Bolt Pattern
  • Specs: 3,500 lbs Idler Trailer Axle (Capacity 3.5K), 5 Lug, Tube: 2 3/8"
  • High Strength Straight Steel Axle Tube
  • Axle comes fully assembled, so all you'll have to do is attach the springs, the U-bolt kits, and the tire and wheel assemblies.
  • Underslung - Spring seats are welded to the bottom of the axle, which allows for a lower ride height.
  • Trailer Axle Design for use on Light Duty Trailers
Bestseller No. 8
RIGID HITCH INCORPORATED 2,000 lb. Torsional Stub Axles with 5-Bolt on 4-1/2 Inch Hubs (TSA-20150)
  • 2,000 lbs capacity
  • Stub axles can be bolted (hardware not included) or welded to trailer frame
  • 45 degree downward starting angle
  • Perfect item to easily build your own custom motorcycle trailer
  • Read product description below for more detailed information.
Bestseller No. 9
The Trailer Parts Outlet - 6k TK Trailer Axle - 6000 lb Idler 6 Lug, 85/70 Hubface/Spring Center - (6'0) Frame Width / 6x5.5 Bolt Pattern
  • 6,000 lbs TK Trailer Axle (6K Capacity), Tube: 3", Bolt Pattern: 6x5.5
  • Axles come fully assembled - Packed with High-Temp Axle Grease
  • High Strength Steel Axle Tube Construction to ensure
  • Designed for use on Light Duty Trailers
Bestseller No. 10
LCI Lippert 3,500LB Straight Idler Trailer Axle 60HF 48SC
  • 60" from Hubface to Hubface and 48" Spring Center to Spring Center.
  • Springs are 25 1/4" long and 1 3/4" wide.
  • 4 Leaf Springs
  • 2-3/8" Main Tube
  • 5 Lug with a 4 1/2" bolt pattern. 1/2 lug studs.

Last update on 2024-04-12 / Affiliate links / Images from Amazon Product Advertising API

This product presentation was made with AAWP plugin.

 


Leave a Comment

Share to...