NHTSA ID Number: 11027563
Manufacturer Communication Number: L-SB-0054-25
TSB/Document Date: 2026-01-09
Summary
Pre-Delivery Service (PDS) is a critical step in satisfying our new car customers. Customer feedback indicates the following areas deserve special attention when performing PDS: •Careful inspection for paint chips/scratches and body dents/dings. •Proper operation of electrical accessories (including interior light, clock, and radio reset). •Interior cleanliness. •Proper function of mechanical systems. The PDS process helps identify potential vehicle concerns before customer delivery. After completing the PDS process, maintain accurate PDS records by ensuring the required documents listed below are completed and recorded in accordance with Lexus
Warranty Policy. •GTS+ Health Check •Completed PDS Check Sheet •Battery Charge Test Print Out •GTS+ Tire Pressure Information Customer retention and proper maintenance of vehicles are and have always been a major focus for Lexus. To help remind customers that regular service is essential to the proper maintenance of the vehicle, dealers are required to install a service reminder sticker before delivery. By doing this, customers will be reminded to return to your dealership for service. Your current service reminder sticker may be used. This bulletin contains the PDS procedures that apply specifically to the 2026 model year UX 300h. Refer to L-PDSB-CS001-D the universal Check Sheet that contains PDS steps that apply to all 2026 model year Lexus vehicles. To properly perform a complete PDS, you must complete all procedures contained in this TSB as well as the PDS Check Sheet. In addition, if the vehicle is stored for over 30 days, refer to L-SB-0011-25, Long-Term Vehicle Storage Guidelines.
F Sport Model
A
Attachment point “A”
3
Mounting Bracket
B
Attachment point “B”
4
Dimples
© 2025 Lexus, a division of Toyota Motor Sales, USA
L-SB-0054-25
December 19, 2025
Page 7 of 14
2026 UX 300h Pre-Delivery Service (PDS)
Front License Plate and Mounting Bracket Installation (continued)
2. Screw the two self-tapping screws directly into the dimples to install the front license plate
mounting bracket.
NOTICE
• Do NOT pre-drill holes into the dimples on the front bumper cover.
• Do NOT overtighten the self-tapping screws.
3. Install the front license plate onto the mounting bracket using two noncorroding bolts
with the following dimensions:
Nominal Length: 15.0 mm (0.59 in.)
Diameter: 6.0 mm (0.24 in.)
Figure 3.
Figure 4.
A
2
1
1
Nominal Length
2
Diameter
2
1
B
2
1
A
Non-F Sport Model
B
F Sport Model
1
2
Front License Plate
© 2025 Lexus, a division of Toyota Motor Sales, USA
L-SB-0054-25
December 19, 2025
Page 8 of 14
2026 UX 300h Pre-Delivery Service (PDS)
Front and Rear Emergency Towing Eyelet Removal and Hole Cover Installation
1. Remove the front and rear emergency
towing eyelets from the front and rear
bumpers by turning them counterclockwise.
Figure 5.
NOTE
If it is difficult to loosen the front emergency
towing eyelet, use a steel bar.
1
2
1
Front Emergency Towing Eyelets
2
Rear Emergency Towing Eyelet
© 2025 Lexus, a division of Toyota Motor Sales, USA
L-SB-0054-25
December 19, 2025
Page 9 of 14
2026 UX 300h Pre-Delivery Service (PDS)
Front and Rear Emergency Towing Eyelet Removal and Hole Cover Installation (continued)
2. Place one of the removed emergency towing eyelets into the luggage tray in the
luggage compartment.
NOTE
Dispose of the other two removed emergency towing eyelets.
Figure 6.
A
B
1
A
Type A
B
Type B
C
Type C
1
Emergency Towing Eyelet
1
© 2025 Lexus, a division of Toyota Motor Sales, USA
C
1
L-SB-0054-25
December 19, 2025
Page 10 of 14
2026 UX 300h Pre-Delivery Service (PDS)
Front and Rear Emergency Towing Eyelet Removal and Hole Cover Installation (continued)
3. Install the front AND rear emergency towing
eyelet hole covers, which are stored in the
glove box, on the front and rear bumpers.
Figure 7.
1
A. Insert the arrow-shaped part of the
emergency towing eyelet hole cover “A”
into the eyelet hole “B” as shown.
B. Install the emergency towing eyelet hole
cover to the hole of the bumper.
B
A
NOTE
Make sure the front emergency towing eyelet
cover is installed in the front, and the rear
emergency towing eyelet cover is installed
in the rear.
2
3
A
B
4
1
Front
2
Front Emergency Towing Eyelet Hole Cover
3
Rear
4
Rear Emergency Towing Eyelet Hole Cover
A
Arrow-shaped Part
B
Eyelet Hole
© 2025 Lexus, a division of Toyota Motor Sales, USA
L-SB-0054-25
December 19, 2025
Page 11 of 14
2026 UX 300h Pre-Delivery Service (PDS)
Installation of Rubber Body Plugs
1. Confirm the number of plugs in the glove box. If two plugs are present, perform
substep 2A ONLY. If four plugs are present, perform substep 2A AND substep 2B.
2. Install plugs according to the instructions below by confirming the number of plugs in the
glove box.
A. Install two plugs in the rear side member hole or rocker inner hole as shown.
B. Install two plugs in the torque box hole or rocker inner hole as shown.
Figure 8.
2
1
6
3
4
5
6
1
Front Side
4
Rear Side Member Hole or Rocker Inner Hole
2
Rear Side
5
Rocker Inner
3
Torque Box Hole or Rocker Inner Hole
6
Install Plug Here (if Applicable)
NOTICE
• The installation of these plugs is required to prevent rust.
• These plugs are stored in the glove box.
• The number of plugs may vary according to production locations in the same
vehicle model.
© 2025 Lexus, a division of Toyota Motor Sales, USA
L-SB-0054-25
December 19, 2025
Page 12 of 14
2026 UX 300h Pre-Delivery Service (PDS)
Power Back Door Initialization
Refer to the applicable Repair Manual for the power back door initialization procedure.
•
2026 UX 300h:
Vehicle Exterior – Door / Hatch – Power Back Door System – Initialization
Tire Pressure Warning System (TPWS) Initialization
Refer to the applicable Repair Manual for the TPWS initialization procedure.
•
2026 UX 300h:
Suspension – Tire Pressure Monitoring – Tire Pressure Warning System – Initialization
NOTE
• When the outside temperature is significantly colder than the shop’s temperature, or there is a
significant ambient temperature change overnight, use GTS+ to determine the proper tire pressure.
• From the Health Check Result Status pane, select the refresh button within the Compensation
Pressure data display.
• This model has four TPWS sensors.
Seating Position Control ECU Initialization
Refer to the applicable Repair Manual for the seating position control ECU initialization
procedure (procedure 2).
•
2026 UX 300h:
Vehicle Interior – Seat – Front Power Seat Control System (w/ Memory) – Registration
Head Unit System Reset
Prior to vehicle delivery confirm radio displays the welcome screen with language options when
Ignition is ON.
If the welcome screen with language options does not display complete the following steps:
1.
2.
3.
4.
Turn the engine switch (power switch) to the ON position (ON mode).
Enter the Following menus: Settings – Info & Security – Info & Security Reset.
Select yes when the system reset dialogue box appears.
Cycle engine switch (power switch) OFF – On to confirm welcome screen appears.
© 2025 Lexus, a division of Toyota Motor Sales, USA
L-SB-0054-25
December 19, 2025
Page 13 of 14
2026 UX 300h Pre-Delivery Service (PDS)
Customize ACC Function
The pre-startup function detects when a user enters the vehicle and energizes the audio head
unit (+BA) so that the multimedia system can quickly be used. This function is not enabled at the
factory to reduce parasitic current draw in transit and storage. To enable this function, it is
necessary to set the ACC customization function in the audio head unit display to OFF before
vehicle delivery. This can be done through the audio head unit or using GTS+ software.
When using the audio head unit:
1. Turn the engine switch (power switch) to the ON position (ON mode).
2. Enter the following menus: Settings – Vehicle Customization – Utility – ACC Customize.
3. Change the setting to OFF (toggle to left).
When using GTS+:
1. Turn the engine switch (power switch) to the ON position (ON mode).
2. Connect GTS+ and enter the following menus: Customize – Others.
3. Change the Accessory Mode (ACC) Transition setting to “Invalid”, select Apply.
Deletion of Vehicle Alert History
As the D/C Cut fuse is removed, the communication between the various ECUs is interrupted.
When the D/C Cut fuse is reinstalled, the communication status is restored, but Lexus Enform
Service Connect may store malfunction history in the form of vehicle alert history. Therefore, it is
necessary to operate the multi-display and delete the vehicle alert history AFTER installing the
D/C Cut fuse during PDS at the dealership.
Deletion Procedure
1. Turn the engine switch (power switch) to the ON position (ON mode).
2. Enter the Following menus: Vehicle – Vehicle Alert.
3. If there is vehicle alert history present, use the delete button to the right of the alert.
HINT
If there is no vehicle alert history stored, the screen will indicate “There are no vehicle alert
messages at this time.”
4. A Banner will display confirming “Deleted vehicle alert information.”
© 2025 Lexus, a division of Toyota Motor Sales, USA
L-SB-0054-25
December 19, 2025
Page 14 of 14
2026 UX 300h Pre-Delivery Service (PDS)
Dealer Contact Information for Call Dealer Head Unit Function
Refer to the Multimedia System Owner’s Manual to add dealer contact information.
•
2026 UX 300h:
Section 2-8 Vehicle Settings – Setting Dealer Information
Navigation — Set Date & Time by GPS
Prior to vehicle delivery, it is necessary to turn the Set date & time by GPS setting to the
ON position.
1. Turn the engine switch (power switch) to the ON position (ON mode).
2. Navigate the following menus in the head unit: Settings – General – Date & Time –
Set Date & Time by GPS.
3. Ensure the Set date & time by GPS function is set to the ON position.
- High density negative paste, improves performance and...
- Enhanced life alloy or Silver Calcium stamped alloy...
- Calcium lead positive grid, maximizes conductivity and...
- Robust envelope separator with puncture resistant back...
- Vent cap design that resists acid leakage
- High density negative paste, improves performance and...
- Enhanced life alloy or Silver Calcium stamped alloy...
- Calcium Lead positive grid, maximizes conductivity and...
- Robust Envelope Separator with puncture-resistant back...
- Vent cap design that resists acid leakage
Last update on 2026-05-30 / Affiliate links / Images from Amazon Product Advertising API
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: L-SB-0054-25
Replacement Service Bulletin Number:
MFR Communication Date: 2026-12-19
MFR Internal Campaign ID/Software Version: L-SB-0054-25
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: UNKNOWN OR OTHER
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- 💯【Conta.ct us for Support Directly】If you met any issues about: Received a registered device/ Language Changing/ Function not Support/ VCI150 Blueto-oth connector malfunction/ Subscription Renewal, please conta.ct us via 📞autelsupply @outlook. com🛣️, we will provide perfect solution for you. ⚠️Note: Autel MK900BT comes with 1-Year Free Software Update, most features will remain active after update subscription expires. 1. For questions regarding updates or need more useful accessories, please conta.ct us via 📞autelsupply @outlook.com🛣️. 2. If the device fails to charge or turn on, please conta.ct us via 📞autelsupply @outlook. com🛣️, we will handle it promptly.
- 🔥🔥🔥【2026 AUTEL FLAGSHIP MK900BT MK900-BT, NEW MODEL OF MK808S MK900 MX900 MK808BT MX808S】2026 newest Autel MK900BT retains all features of MK808S MX900 MX808S MK808Z MK808Z-BT MK808K-BT, while EXTRA added powerful functions (value 2000+ bucks). The Pro-level Autel MK900BT makes a big leaps: 28+➡40+, 50+➡3000+ Active Tests, 2026 NEW✅CAN FD & DOIP protocols ✅Pre&Post diagnostic report ✅WIFI Print ✅Auto VIN&Auto Scan 2.0 ✅Scan VIN/ License ✅Battery Test (Need purcha.se BT506). If found defect or us.ed, please conta-ct 📞autelsupply @outlook. com📞 get perf-ect solut.ion.
- 🚗【3000+ ACTIVE TESTS (50➡3000+), SAME AS MS906 PRO】Differ from MS906BT MS906 MP808 MK808 MX808 MK808BT only 50 tests, Autel scanner MK900BT escaner automotriz professional offers 3000+ active tests, it can send command to ECUs & monitor actuators operation, quickly locating faulty components. Bidirectional scanning takes your diagnostics to the next level with menu lists 3000+ active tests, such as windows, rear mirrors, sunroof, wipers, fuel injector, coolant fans, radiator fan, AC clutch, coolant pump and more. Note: Functions are not available for all vehicles, please send vehicle VIN to us check compatibility.
- 🚗【40+ HOT SERVICES FOR 150 MAKES (28+➡40+)】Full level-up of OBD2 code reader MaxiCOM MK808S MK808 MK808Z MX808 MK808Z-BT with 28 service, Autel scan tool MK900BT/ MK900-BT offers 40+ maintenance service on 150+ brands 10,000 vehicles from 1996-2025-2026. Hottest Services like: Oil Reset, ABS Bleed, SAS Calibration, Injector Coding, SRS, Throttle Reset, Gearbox Reset, Battery Registration etc. Added 12+ advanced resets: rain slash light sensor reset, HVA.C/ SUS calibration etc. Welcome to send Vehicle Make>Model>Year>VIN>Functions you required to 📞autelsupply @ outlook . com📞 check compatibility.
- 🚗【OE ALL SYSTEM DIAGNOSE, AUTO SCAN 2.0: SCAN LICENSE/ AUTO VIN】2026 new release Autel MaxiCOM MK900-BT scan tool embodies all system diagnostic with its 8in display for all vehicles. Like Sna.p-on tools, it can perform ✔Read/Clear Codes✔Displays 5-in-1 Live Data✔Record & Playback Data✔Retrieve Info on all available systems like ABS ECM BCM SRS TCM etc. In addition to Auto VIN technology, Autel MK900BT adds Scan License/ Auto Scan 2.0 to identify vehicle’s VIN/ license, make, year, model, no need manual input; One-click WiFi Printing of Pre&Post comparison diagnostic reports, highlight root causes of problems.
- 【TURN OFF CEL】 This AL319 car scanner diagnostic tool supports Reading and Clearing DTCs, DTC Look Up, displaying Live Data, Freeze Frame & I/M Readiness, view vehicle information, etc., to figure out the root cause of the Check Engine Light (CEL) and turn it off, helping you catch any potential issues early and avoid excessive costs from unnecessary repairs.
- 【EXTENSIVE APPLICATION】 Autel AL319 Compatible with 7 languages (English, French, Spanish, etc.) and various post-1996 OBD II protocol vehicles (Toyota
, Nissan, Honda, Ford, etc.), this OBD II scanner provides accurate and fast diagnosis for worldwide car owners. - 【FOR END USER & DIYERS】 This error code reader AL319 is “plug and play” and comes with an easy interface. Even if you’re not familiar with vehicle repair, you can quickly take control of this obd2 scanner, and get the information you want.
- 【USER-FRIENDLY DESIGN】 This OBD2 scanner and check engine code reader features a patented One-Click I/M Readiness, TFT color display, built-in speaker, LED Indicator etc. The cable is long enough without being too long and getting in the way. No batteries are needed.
- 【HIGH-QUALITY SERVICES】 12 months war.ranty from the date of purchase and lifetime free update are offered by this Automobile OBDII scan tool. Welcome to contact us via Q&A, email, or hotline, and our after-sale-service team for technical support.
- 👨🎓Tips Before Order: 🚩All function are vehicle-specific - send VIN(17 digits)/Make/Model/Year & needed function via 📞auteldirect @ outlook . com📞 to check before order. 🚩Register tool: a) Follow on-screen guide; or b) Register em-ail on Autel we-b, then bind using SN(back of device) + verification code (find in tool settings or con-tact us via above em-ail). MK808BT PRO comes with ✅English, if need Spanish, please s.end device SN to add. ✅1-year war-ranty. ✅$150 worth 1yr fr-ee updates(New users: ignore renewal alerts). ⚠️📢Post-expiry: Most functions remain functional,for exclusions, refer to A+ Tips. ⚠️Fee for FCA AutoAuth Ga.teway(optional): $50/year, charged by AutoAuth,not Autel.
- 【2026 MK808BT PRO: Same as MK900BT, up of MK900 MX900 MK808S MX808S】Why pay more? 2026 MK808BT PRO functions as MK900BT and saves you 100USD. At same c0st, you now get diagnostic 8X faster and sup-port for 150+ models(1996-2026).💡Dramatically Improved: ✔️Faster & Smarter OS: Android 4.4➡ Android 11 ✔️More Services: 28+➡ 40+ ✔️Bidirectional Control: 50+➡ 3,000+ ✔️Enhanced Hardware: 1/32G➡ 4G/64G ✔️2.4GHz➡ 5G Dual WiFi ✔️Working range: 0.9m➡ 10m+ 🔋Battery test is clear on the large 7in display(BT506 required). 🔔Your Autel scanner is shipped brand new. For any issues(used, damaged, incompatible), e-m-a-il 📞auteldirect @ outlook . com📞 for priority resolution.
- 👍【New Next-Level Bidirectional Control, 50➡3000+ Tests, Covers Daily Repairs】Unlike the Autel DS708 DS808 MP808 MK808 and MX808 car diagnostic scanners, which offer only 50 functional tests, the Autel bidirectional scan tool MK808BT PRO is equipped with over 3000 active tests. These tests are widely used on car subsystems to help technicians quickly check if the car's actuators are functioning properly. Such as ABS, windows, rearview mirrors, wipers, sunroofs, fuel injectors, AC clutches, coolant fans, radiator fans, coolant pumps,etc. Tips📢: All functions are vehicle-specific, not universal to all vehicles,pls send VIN to 📞auteldirect @ outlook . com📞check compatibility before order.
- 👍【28+ Hot Services for 150+ Makes】Autel scan tool MK808BT PRO, upgraded with a BT VCI Mini(valued at 120USD), surpasses the old wired OBDII scanner MK808S MK900, by providing a convenient 33ft wireless working range, offering greater freedom and comfort compared to the 3.3ft cable limit of the MK900 MK808S MX808S car scanner. New features include VIN Check across different modules for comparison and 28+ resets, such as injector coding, ABS autobleed, Oil reset, SAS cali.bration, BMS, throttle relearn, suspension adjustments, etc. ⚠️📢Tips: Service functions are vehicle-specific, not universal to all vehicles, pls send VIN to 📞auteldirect @ outlook . com📞check compatibility before order.
- 👍【All Available Module Diagnosis - OE-Level Scanner】The OE versatile OBDII scan tool MK808BT PRO escaner para autos effectively works with all car systems: ABS, ECM, BCM, SRS, TCM,etc. It identifies vehicles via AutoVIN/manual input/select, like S.nap-on tools, it can ✔read/clear 7000+ DTCs, ✔read ECU info, ✔view 5-in-1 live data, ✔perform active tests, and ✔reset services. ✔Reports can be shared via QR-code and printed, working globally and 21+ multilingual. Supports 150+ US/EU/Asian makes, with ongoing updates from 2024 to 2026. ⚠️Note📢: The AutoVIN function usually works for post-2006 cars, depending on if the vehicle's VIN is stored in the ECU. You can always do manual input/select.
Last update on 2026-06-23 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.