T-SB-0094-25

December 17, 2025

2026 Mirai Pre-Delivery Service (PDS)
Service
Category

General

Section

Pre-Delivery Service

Market USA

Applicability
YEAR(S)

MODEL(S)

2026

Mirai

ADDITIONAL INFORMATION

Introduction

Pre-Delivery Service (PDS) is a critical step in satisfying our new car customers. Customer
feedback indicates the following areas deserve special attention when performing PDS:


Careful inspection for paint chips/scratches and body dents/dings.



Proper operation of electrical accessories (including interior light, clock, and radio reset).



Interior cleanliness.



Proper function of mechanical systems.

The PDS process helps identify potential vehicle concerns before customer delivery. After
completing the PDS process, maintain accurate PDS records by ensuring the required
documents listed below are completed and recorded in accordance with Toyota Warranty Policy.
 GTS+ Health Check
 Completed PDS Check Sheet
 Battery Charge Test Print Out
 GTS+ Tire Pressure Information
Customer retention and proper maintenance of vehicles are, and have always been, a major
focus for Toyota. To help remind customers that regular service is essential to the proper
maintenance of the vehicle, dealers are required to install a service reminder sticker before
delivery. By doing this, customers will be reminded to return to your dealership for service. Your
current service reminder sticker may be used. (See PDS Check Sheet item 7 of “Final Inspection
and Cleaning.”)

Draft - Confidential

© 2025 Toyota Motor Sales, USA

Page 1 of 13

T-SB-0094-25

December 17, 2025

Page 2 of 13

2026 Mirai Pre-Delivery Service (PDS)
Introduction (continued)

This bulletin contains the PDS procedures that apply specifically to 2026 model year
Mirai vehicles.
Refer to T-SB-0023-25, the universal Check Sheet that contains PDS steps that apply to all 2026
model year Toyota vehicles. To properly perform a complete PDS, you must complete all
procedures contained in this TSB as well as the universal PDS Check Sheet. In addition, if the
vehicle is stored for over 30 days, refer to T-SB-0009-25, Long-Term Vehicle Storage Guidelines.
Refer to the table below for a definition of terms that may be used in this bulletin.
Table 1.
TERM

ACRONYM

Conventional Vehicle

CV

A vehicle with only a gasoline engine for propulsion

Electrified Vehicle

EV

A vehicle that utilizes a hybrid, plug-in hybrid, fuel cell, or battery
electric system for propulsion

Hybrid Electric Vehicle

HEV

Plug-in Hybrid Electric Vehicle

PHEV

Battery Electric Vehicle

BEV

Fuel Cell Electric Vehicle

FCEV

A vehicle with both a hydrogen fuel cell and an HV battery

State of Charge

SOC

The remaining capacity available in a battery

12-Volt

12V

Standard 12V battery used to power electrical systems
separate from high voltage components

High Voltage

HV

HV battery used to power the electrified vehicle

Draft - Confidential

DEFINITION

A vehicle with both a gasoline engine and an HV battery
A vehicle with both a gasoline engine and an HV battery that
can be charged externally
A vehicle with only an HV battery that can be charged externally

© 2025 Toyota Motor Sales, USA

T-SB-0094-25

December 17, 2025

Page 3 of 13

2026 Mirai Pre-Delivery Service (PDS)
Table of Contents



Warranty Policy ....................................................................................................................... 4



Warranty Information .............................................................................................................. 4



Required Tools & Equipment .................................................................................................. 4



D/C Cut Fuse Installation ........................................................................................................ 5



Front License Plate and Mounting Bracket Installation* .......................................................... 6



Front and Rear Emergency Towing Eyelet Removal and Hole Cover Installation ................... 8



Front Wheel Opening Extension Pad Installation .................................................................. 10



Installation of Rubber Body Plugs ......................................................................................... 11



Tire Pressure Warning System (TPWS) Initialization ............................................................ 12



Head Unit System Reset ....................................................................................................... 12



Dealer Contact Information for Call Dealer Head Unit Function* ........................................... 13



Navigation — Set Date & Time by GPS ................................................................................ 13
*If applicable.

Draft - Confidential

© 2025 Toyota Motor Sales, USA

T-SB-0094-25

December 17, 2025

Page 4 of 13

2026 Mirai Pre-Delivery Service (PDS)
Warranty Policy

If the need for additional repairs or adjustment is noted during PDS, the required service should
be performed under warranty. Reimbursement will be managed under the warranty policy.
The Warranty Policy and Procedures Manual requires that you maintain the completed
Check Sheet in the customer’s file. If you cannot produce a completed form for each retailed
vehicle upon TMS and/or Region/Distributor audit, the PDS payment amount will be subject
to debit.
An additional Repair Order completed in conjunction with normal PDS MUST have time
punch/flags for service. If multiple repairs are performed, separate time flags MUST be punched
for each repair.

Warranty Information
OP CODE

DESCRIPTION

MODEL

TIME

OFP

T1

T2

001013

Pre-Delivery Service (PDS)

Mirai

1.2

–

–

–

Required Tools & Equipment
REQUIRED EQUIPMENT

SUPPLIER

Techstream ADVi*
Techstream Lite

PART NUMBER

QTY

TSADVUNITECP
ADE

Techstream Lite (Green Cable)

TSLP3DLR01

1

TSLP2DLR01

*Essential SST.

NOTE
 Only ONE of the Techstream units listed above is required.
 GTS+ Software version 2025.04.002.02 or later is required.
 Additional Techstream units may be ordered by calling Approved Dealer Equipment (ADE)
at 1-800-368-6787 or by visiting TIS – Diagnostics – Tools & Equipment – Techstream Order Portal.

Draft - Confidential

© 2025 Toyota Motor Sales, USA

T-SB-0094-25

December 17, 2025

Page 5 of 13

2026 Mirai Pre-Delivery Service (PDS)
D/C Cut Fuse Installation

Check the location of the D/C Cut No. 1 and D/C Cut No. 2 fuses (30A). They may have been
removed at the assembly plant and temporarily stored in the blank spaces of the relay block in
the engine compartment to minimize battery discharge during transportation and storage.


If the D/C Cut No. 1 and D/C Cut No. 2 fuses (30A) are still in their original location in the
relay block, proceed with performing a Health Check using GTS+.



If the D/C Cut No. 1 and D/C Cut No. 2 fuses (30A) are NOT in their original location, it is
necessary to remove the D/C Cut No. 1 and D/C Cut No. 2 fuses (30A) from the blank spaces
in the relay block and reinstall them in their original location as shown. After installation,
confirm that ALL related DTCs are cleared.

Figure 1.
1

2
3

4

5

1

Relay Block

4

Install the D/C Cut No. 1 Fuse (30A)
(Original Location)

2

Remove the D/C Cut No. 1 Fuse (30A)
(Blank Space)

5

Install the D/C Cut No. 2 Fuse (30A)
(Original Location)

3

Remove the D/C Cut No. 2 Fuse (30A)
(Blank Space)

NOTE
 With the D/C Cut No. 1 and D/C Cut No. 2 fuses (30A) removed, if ANY DTCs are detected when the
ignition is turned ON during transportation, use GTS+ to clear ALL DTCs AFTER ensuring that there
are NO malfunctions.
 While the vehicle is stored at the dealership, disconnect the negative (–) battery terminal to prevent
battery discharge. Refer to T-SB-0017-25, Battery Inspection and Maintenance During PDS, for
battery maintenance information.

Draft - Confidential

© 2025 Toyota Motor Sales, USA

T-SB-0094-25

December 17, 2025

Page 6 of 13

2026 Mirai Pre-Delivery Service (PDS)
Front License Plate and Mounting Bracket Installation

The front license plate bracket and two self-tapping screws are stored in the vehicle. Follow this
procedure to install the front license plate bracket and front license plate in states where it is
required by law.
1. Align attachment point “A” of the mounting
bracket with the dimples on the
radiator grille.

Figure 2.
1