ZN Connection offline

Technical Service Bulletin Transaction No.: 2080373/1
34 Uncomfortable gear shifts when shifting in higher gears Release date: Dec 9, 2025
Condition
Model(s) Year(s) VIN Range Vehicle Specific Equipment
Q3 2022 All OEW
Customer statement:

* Uncomfortable gear shifts when shifting up from 5th to 6th gear.
and/or
* Uncomfortable gear shifts when shifting up from 6th to 7th gear.
and/or

* Uncomfortable gear shifts when shifting up from 7th to 8th gear.

Workshop findings:

* Norelevant event memory entries in diagnostic address 0002.
Technical Background

Optimized ignition timing during upshifts.

Production Solution

Implemented in MY23.

Service

©

Always use DolP when flashing a control module via ODIS in supported vehicles.

- To activate DolP, select Administration > General > GFF Process > DoIP communication > Only allow
DolP communication.

- This setting will automatically reset when the diagnostic session has ended. You can tell if DoIP is
active by observing a red LED on the VAS 6154 (A).

Follow all instructions in TSB 2011732: 00 Software Version Management (SVM), operating instructions.

Update the Transmission Control Module (0002) using the SVM action code as listed in the table below, if
necessary:

Model Old Software

Part Number

Old Software
Version

New Software
Part Number

New Software
Version

SVM Code
Input

Diagnostic
Address

(or higher) (or higher)
0001
Q3 0001 83A 906 259 D 83A 906 259 D 0003 01A320
0002
Warranty
Claim Type: * — If the vehicle is outside of any warranty, this Technical Service Bulletin is

informational only.

Service Number: 2470
Damage Code: 0041
Labor Operations: Software update 0151 0010 See SRT with
associated operations
Software update 0151 0060 Time stated on the
diagnostic protocol
Claim Comment: As per TSB 2080373/1

All warranty claims submitted for payment must be in accordance with the Audi Warranty Policies and Procedures

Manual. Claims are subject to review or audit by Audi Warranty.

Additional Information

All part and service references provided in this TSB (2080373) are subject to change and/or removal. Always check
with your Parts Department and/or ETKA for the latest information and parts bulletins. Please check the Repair
Manual for fasteners, bolts, nuts, and screws that require replacement during the repair.

©2025 Audi of America, Inc. All rights reserved. The information contained in this document is based on the latest
information available at the time of printing and is subject to the copyright and other intellectual property rights of
Audi of America, Inc., its affiliated companies, and its licensors. All rights are reserved to make changes at any time
without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form
or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be

modified or reposted to other sites, without the prior expressed written permission of the publisher.