NHTSA ID Number: 11021934
Manufacturer Communication Number: 36920
TSB/Document Date: 2025-08-18
Summary
This is a Technical Journal: Check engine light and DTC - ECM P061C48/P060C48. Change engine oil and filter.
Remove the screws.
Remove the clips.
Remove the marked part.
TJ Instruction VCC-531608-1
Page 30 ( 65 )
Remove the screws.
Remove the marked part.
Torque:
Lower torque rod rear right, to Engine mount
bracket , 110 Nm
Remove the screws.
Remove the marked part.
Torque:
Lower torque rod rear right, to subframe ,
60 Nm
TJ Instruction VCC-531608-1
Page 31 ( 65 )
Install the Special tool.
Install the screws.
Use: Screw M10 x 20 mm
Special Tool: T9997534, Mounting
Install the Special tool.
Adjust to the specified value.
Special Tool: T9997533, Support
TJ Instruction VCC-531608-1
Page 32 ( 65 )
Remove the screws.
Remove the marked part.
1.
2.
Torque:
• Stage 1 : Engine mount bracket, to
Cylinder head, M12 , 90 Nm
• Stage 2 : Engine mount bracket, to
Cylinder head, M12 , 130°
Torque:
Engine mount bracket, to Cylinder head,
M10 , 60 Nm
Caution! Make sure that new bolts are
installed.
TJ Instruction VCC-531608-1
Page 33 ( 65 )
Vehicles early version
Note! Make sure to follow the correct
sequence during installation.
Remove the screws.
Remove the marked part.
Torque:
Right-hand engine pad to body frame ,
60 Nm
Vehicles late version
Note! Make sure to follow the correct
sequence during installation.
Remove the screws.
Remove the marked part.
Torque:
Right-hand engine pad to body frame ,
60 Nm
TJ Instruction VCC-531608-1
Page 34 ( 65 )
All vehicles
Special Tool: T9997718, Counterhold
Remove the marked part.
TJ Instruction VCC-531608-1
Page 35 ( 65 )
Note! The component can be reused
unless it has been subjected to abnormal
mechanical stress, damage or oil
contamination.
Lower the engine.
TJ Instruction VCC-531608-1
Page 36 ( 65 )
Note! Note the position of the component
before removal.
Extra information
Caution! Make sure that the component is
positioned correctly.
TJ Instruction VCC-531608-1
Page 37 ( 65 )
Continue the removal following the steps below.
Install the Special tool.
Pull the component in direction of the arrow.
Disconnect the connectors.
Remove the cable harness clips.
TJ Instruction VCC-531608-1
Page 38 ( 65 )
Remove the screws.
Remove the marked part.
Remove the screw.
TJ Instruction VCC-531608-1
Page 39 ( 65 )
Disconnect the connector.
Loosen the clips.
Remove the marked part.
Torque:
Lambda probe, tightening , 45 Nm
TJ Instruction VCC-531608-1
Page 40 ( 65 )
Remove the screws.
Remove the marked part.
Remove the screws.
Disconnect the connectors.
Fold marked part aside.
TJ Instruction VCC-531608-1
Page 41 ( 65 )
Undo the hose from the connection.
Fold marked part aside.
Remove the screws.
Remove the marked parts.
Torque:
M6 , 10 Nm
TJ Instruction VCC-531608-1
Page 42 ( 65 )
Extra information
Caution! Make sure that the correct spare
part is being used. See spare part catalogue
to choose correct component.
Apply grease on the area indicated.
Continue the removal following the steps below.
Vehicles early version
Caution! The component must be removed
by hand. Tools may not be used.
Note! Use new seals.
Remove the screws.
Remove the marked parts.
Torque:
M6 , 10 Nm
TJ Instruction VCC-531608-1
Page 43 ( 65 )
All vehicles
Disconnect the connector.
Remove the screws.
Remove the marked parts.
Note! Make sure to follow the correct
sequence during installation.
Note! Use a new seal.
Remove the clips.
Remove the screws.
Remove the marked part.
Torque:
M6 , 10 Nm
TJ Instruction VCC-531608-1
Page 44 ( 65 )
Note! Use new seals.
Remove the screws.
Remove the marked part.
1.
2.
Torque:
M5 , 5 Nm
Torque:
M6 , 10 Nm
Remove the screws.
Remove the marked part.
Torque:
M6 , 10 Nm
TJ Instruction VCC-531608-1
Page 45 ( 65 )
Remove the Special Tool.
Remove the screws.
Remove the marked part.
TJ Instruction VCC-531608-1
Page 46 ( 65 )
Install the Special tool.
Pull the component in direction of the arrow.
Remove the nut.
Torque:
M8 , 24 Nm
TJ Instruction VCC-531608-1
Page 47 ( 65 )
Remove the nut.
Torque:
M8 , 24 Nm
Disconnect the connector.
TJ Instruction VCC-531608-1
Page 48 ( 65 )
Remove the screws.
Torque:
M8 , 24 Nm
Remove the screws.
Remove the marked part.
Hint: It may be necessary to twist or turn
the component.
Torque:
M8 , 24 Nm
TJ Instruction VCC-531608-1
Page 49 ( 65 )
Remove the screws.
Remove the marked part.
1.
2.
Torque:
M8 , 24 Nm
Torque:
M10 , 50 Nm
Note! Make sure that the component is
installed.
TJ Instruction VCC-531608-1
Page 50 ( 65 )
Remove the screws.
Torque:
M6 , 10 Nm
Warning! Be prepared to collect escaping
fluid.
Caution! Make sure that the area around
the component is clean and free of foreign
material.
Note! Make sure that a new component is
installed.
Remove the nuts.
Remove the marked part.
Special Tool: T9814129, Hook wrench
Torque:
• Stage 1 : High-Pressure Fuel Line to Fuel
Pump , 18 Nm
• Stage 2 : High-Pressure Fuel Line to Fuel
Pump , 30 Nm
TJ Instruction VCC-531608-1
Page 51 ( 65 )
Release the locks.
Caution! Make sure that the area around
the component is clean and free of foreign
material.
Caution! In order to avoid damage to the
injectors, the part must be carefully pulled
straight up.
Caution! Be extra careful when removing or
installing this component.
Remove the screws.
Remove the part carefully
1.
2.
3.
Torque:
Fuel rail M7 , 22 Nm
Torque:
Fuel rail M8 , 30 Nm
Torque:
M6 , 10 Nm
TJ Instruction VCC-531608-1
Page 52 ( 65 )
Warning! Be prepared to collect escaping
fluid.
Caution! Be extra careful when removing or
installing this component.
Remove the marked parts.
When necessary, perform the following instruction.
Note! Orientation view
Special Tool: T9512943, L-hook
TJ Instruction VCC-531608-1
Page 53 ( 65 )
Caution! In order to avoid damage to the
injectors, the part must be carefully pulled
straight up.
Caution! Be extra careful when removing or
installing this component.
Remove the marked part.
Special Tool: T9512943, L-hook
Replace injector seal , refer to:
Removal, replacement and installation
2 - Engine with mountings and equipment
23 - Fuel system
237 - injector and delivery pipe
Caution! Be extra careful when removing or
installing this component.
Install the marked components.
TJ Instruction VCC-531608-1
Page 54 ( 65 )
Extra information
Caution! Make sure that the mating faces
are clean and free of foreign material.
Caution! Clean carefully, using compressed
air.
Special Tool: T9997505, Cleaning tool
Remove the Special Tool.
TJ Instruction VCC-531608-1
Page 55 ( 65 )
Applies to reassembly of the same component
Note! The component can be reused
unless it has been subjected to abnormal
mechanical stress, damage or oil
contamination.
Caution! The part is to be reused.
TJ Instruction VCC-531608-1
Page 56 ( 65 )
Caution! The part is to be reused.
Continue the removal following the steps below.
Remove camshaft seal , refer to:
Removal, replacement and installation
2 - Engine with mountings and equipment
21 - Engine
215 - transmission
Loosen each bolt 2 turns at a time until all bolts
are removed.
Remove the marked part.
TJ Instruction VCC-531608-1
Page 57 ( 65 )
Vehicles early version
Caution! Note the location of the
component before removal.
Caution! Take extra care when handling the
components.
Remove the marked parts.
Vehicles late version
Caution! Note the location of the
component before removal.
Caution! Take extra care when handling the
component.
Remove the marked parts.
TJ Instruction VCC-531608-1
Page 58 ( 65 )
Cleaning
Caution! Take extra care not to damage the
mating faces.
Caution! Make sure that the oil galleries are
clean and free of foreign material.
Note! Make sure that the mating faces are
clean and free of foreign material.
Use: Putty knife (plastic)
Use: Abrasive cloth
Use: Isopropanol ,
Caution! Take extra care not to damage the
mating faces.
Caution! Make sure that the oil galleries are
clean and free of foreign material.
Note! Make sure that the mating faces are
clean and free of foreign material.
Use: Putty knife (plastic)
Use: Abrasive cloth
Use: Isopropanol ,
TJ Instruction VCC-531608-1
Page 59 ( 65 )
Installation
Use: Engine oil ,
Use: Engine oil ,
TJ Instruction VCC-531608-1
Page 60 ( 65 )
Vehicles early version
Caution! Make sure that the components
are positioned correctly.
Caution! Make sure that the components
are positioned correctly.
Install the marked components.
TJ Instruction VCC-531608-1
Page 61 ( 65 )
Vehicles late version
Caution! Make sure that the components
are positioned correctly.
Install the marked components.
All vehicles
Caution! Make sure that the components
are positioned correctly.
TJ Instruction VCC-531608-1
Page 62 ( 65 )
Caution! Make sure that the components
are positioned correctly.
Install the marked components.
Caution! Make sure that the components
are positioned correctly.
TJ Instruction VCC-531608-1
Page 63 ( 65 )
All vehicles
Note! The component must be installed within 5 minutes of applying the sealant.
Use: Chemical gasket , 1161771
Caution! Make sure that equal pressure is
applied to the full length of the component.
Note! Make sure to follow the sequence
indicated.
Install the marked component.
Install the screws.
Tighten each bolt 2 turns at a time.
Torque:
M7 , 17 Nm
TJ Instruction VCC-531608-1
Page 64 ( 65 )
To install, reverse the removal procedure.
Check
Reinstall the fuse.
Start the engine.
Warning! Make sure that there are no leaks.
TJ Instruction VCC-531608-1
Page 65 ( 65 )
Warning! Make sure that there are no leaks.
Switch off the engine.
Discard of the previously installed fuse and
install a new one.
- Formulated for engines with 75,000 miles or more, Valvoline...
- Delivers 20% better wear protection and 15% better sludge...
- Extra detergents safeguard against friction, corrosion and...
- Advanced friction-fighting additives help maximize...
- Provides performance benefits for high mileage, new and...
- Advanced protection against the four main causes of engine...
- Delivers 40% stronger wear protection than industry...
- Provides 15% better deposit defense vs. industry standards...
- Up to 2.5X better heat protection vs. industry standards to...
- Engineered for excellent low-temperature flow, reducing...
Last update on 2026-06-12 / Affiliate links / Images from Amazon Product Advertising API
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: 36920
Replacement Service Bulletin Number:
MFR Communication Date: 2025-07-24
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: ENGINE
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- 💯【Conta.ct us for Support Directly】If you met any issues about: Received a registered device/ Language Changing/ Function not Support/ VCI150 Blueto-oth connector malfunction/ Subscription Renewal, please conta.ct us via 📞autelsupply @outlook. com🛣️, we will provide perfect solution for you. ⚠️Note: Autel MK900BT comes with 1-Year Free Software Update, most features will remain active after update subscription expires. 1. For questions regarding updates or need more useful accessories, please conta.ct us via 📞autelsupply @outlook.com🛣️. 2. If the device fails to charge or turn on, please conta.ct us via 📞autelsupply @outlook. com🛣️, we will handle it promptly.
- 🔥🔥🔥【2026 AUTEL FLAGSHIP MK900BT MK900-BT, NEW MODEL OF MK808S MK900 MX900 MK808BT MX808S】2026 newest Autel MK900BT retains all features of MK808S MX900 MX808S MK808Z MK808Z-BT MK808K-BT, while EXTRA added powerful functions (value 2000+ bucks). The Pro-level Autel MK900BT makes a big leaps: 28+➡40+, 50+➡3000+ Active Tests, 2026 NEW✅CAN FD & DOIP protocols ✅Pre&Post diagnostic report ✅WIFI Print ✅Auto VIN&Auto Scan 2.0 ✅Scan VIN/ License ✅Battery Test (Need purcha.se BT506). If found defect or us.ed, please conta-ct 📞autelsupply @outlook. com📞 get perf-ect solut.ion.
- 🚗【3000+ ACTIVE TESTS (50➡3000+), SAME AS MS906 PRO】Differ from MS906BT MS906 MP808 MK808 MX808 MK808BT only 50 tests, Autel scanner MK900BT escaner automotriz professional offers 3000+ active tests, it can send command to ECUs & monitor actuators operation, quickly locating faulty components. Bidirectional scanning takes your diagnostics to the next level with menu lists 3000+ active tests, such as windows, rear mirrors, sunroof, wipers, fuel injector, coolant fans, radiator fan, AC clutch, coolant pump and more. Note: Functions are not available for all vehicles, please send vehicle VIN to us check compatibility.
- 🚗【40+ HOT SERVICES FOR 150 MAKES (28+➡40+)】Full level-up of OBD2 code reader MaxiCOM MK808S MK808 MK808Z MX808 MK808Z-BT with 28 service, Autel scan tool MK900BT/ MK900-BT offers 40+ maintenance service on 150+ brands 10,000 vehicles from 1996-2025-2026. Hottest Services like: Oil Reset, ABS Bleed, SAS Calibration, Injector Coding, SRS, Throttle Reset, Gearbox Reset, Battery Registration etc. Added 12+ advanced resets: rain slash light sensor reset, HVA.C/ SUS calibration etc. Welcome to send Vehicle Make>Model>Year>VIN>Functions you required to 📞autelsupply @ outlook . com📞 check compatibility.
- 🚗【OE ALL SYSTEM DIAGNOSE, AUTO SCAN 2.0: SCAN LICENSE/ AUTO VIN】2026 new release Autel MaxiCOM MK900-BT scan tool embodies all system diagnostic with its 8in display for all vehicles. Like Sna.p-on tools, it can perform ✔Read/Clear Codes✔Displays 5-in-1 Live Data✔Record & Playback Data✔Retrieve Info on all available systems like ABS ECM BCM SRS TCM etc. In addition to Auto VIN technology, Autel MK900BT adds Scan License/ Auto Scan 2.0 to identify vehicle’s VIN/ license, make, year, model, no need manual input; One-click WiFi Printing of Pre&Post comparison diagnostic reports, highlight root causes of problems.
- 【TURN OFF CEL】 This AL319 car scanner diagnostic tool supports Reading and Clearing DTCs, DTC Look Up, displaying Live Data, Freeze Frame & I/M Readiness, view vehicle information, etc., to figure out the root cause of the Check Engine Light (CEL) and turn it off, helping you catch any potential issues early and avoid excessive costs from unnecessary repairs.
- 【EXTENSIVE APPLICATION】 Autel AL319 Compatible with 7 languages (English, French, Spanish, etc.) and various post-1996 OBD II protocol vehicles (Toyota
, Nissan, Honda, Ford, etc.), this OBD II scanner provides accurate and fast diagnosis for worldwide car owners. - 【FOR END USER & DIYERS】 This error code reader AL319 is “plug and play” and comes with an easy interface. Even if you’re not familiar with vehicle repair, you can quickly take control of this obd2 scanner, and get the information you want.
- 【USER-FRIENDLY DESIGN】 This OBD2 scanner and check engine code reader features a patented One-Click I/M Readiness, TFT color display, built-in speaker, LED Indicator etc. The cable is long enough without being too long and getting in the way. No batteries are needed.
- 【HIGH-QUALITY SERVICES】 12 months war.ranty from the date of purchase and lifetime free update are offered by this Automobile OBDII scan tool. Welcome to contact us via Q&A, email, or hotline, and our after-sale-service team for technical support.
, 
- 📞【Warm Tips】Dear friend, if you have any issues or need any tech support after receiving your MK900BT (received a registered item/ language changing/ functions compatibility/ renew subscription, etc.), please don't hesitate to tell us directly via 💌Autelonline @ outlook . com💌, we will do whatever we can to help you at first time. Besides, if you need other accessories, such as Autel endoscope MV108S, please don't hesitate to con-tact us.
- 🔥【Amazon Choice MK900BT, 2.0 Newer of MK900 MX900 MS906 MK808BT PRO MP808S MK808S MX808S】Big News! 2026 Autel most cost-effective 8in All System & Bidirectional Scan Tool MK900BT is born! 619 only, yet featuring 40+ Hot Services same as MaxiSys Ultra/ MS909/ Elite II Pro/ MK908P/ MS906 PRO/ MS906MAX, among lots of advanced & newer functions: ✅3000+ Active Tests ✅CAN FD/ DoIP new protocols ✅OE All System Diagnosis, Autel Scan 2.0 ✅5-in-1 Live Data ✅detailed Pre & Post Scan ✅Scan VIN/License ✅WiFi Print ✅FAC AutoAuth & Renault SGW ✅Endoscope with MV108/MV105 ✅160+ car brands coverage, etc.
- 😊【Why Choose Autel Scanner MK900-BT, Not MK808S MK900 MX900?】➊ MK900BT escaner automotriz designs with Autel MaxiVCI V150, adopting advanced German Wireless Technology with more stable&faster data transmission, allowing you to work in and around vehicles with a 10M/33FT remote diagnostics. Instead, at almost the same budget, MK900 MK808S outdated wired code reader only with 1m cable, so you must curl up on the steering wheel! ➋ MK900BT can work with Autel BT506 to perform professional cranking charging system tests and in-vehicle & out-of-vehicle battery tests, but MK900 MK808S CANNOT. Some sellers say MK900 can work with BT506, pls don't believe it, who are not Autel a.uthorized sellers.
- 🚀【Upgraded Hardware 2.0, 10X F.aster than Ever】Based on old Android 4.4.4 ver. of MX808 MK808 MK808BT MP808 MP808BT MS906 MS906BT, Autel scan tool MK900-BT takes a big leap to 🟢f.astest OS 11 🟢4-core, 1.8GHz RK3566 speed boosted + lower power consumption🔋doubled 7700mAh Battery 🟢larger & sharper 8" 1280*800 touchscreen with intuitive user interface 🟢expanded 4+64G enough to save more files/data 🟢8M Rear camera gives clearer snapshot, etc. MK900BT scanner for car, is the best bang for your b.uck in the category.
- 📢【New Released: CAN FD/DoIP + WIFI Print + Pre & Post Scan + Scan VIN/ License】MK900BT OBD2 scanner diagnostic tool updates lots of advanced features previously available only for scanners above 2000$ (MS906 Pro MS908S Pro, etc.) ✅New protocols CAN FD works for GM 2019+ ✅DOIP works for Volv.o 2018+, Jaguar&Land Rover 2017+, BM.W F&G chassis models ✅Same WIFI Print as MaxiSys Ultra ✅Detailed Pre/ Post scan reports to up repair efficiency ✅Scan VIN/License can identify your cars in seconds, more accurately! But Autel MK808S/ MK808BT PRO cannot.
Last update on 2026-06-12 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.