A Connection offline
Technical Service Bulletin
cluster, var. other malf.
‘Status ___[Relessedforpubishing SSCS
New customer code
(Object of complaint ———=SCSCS~*~S~S«*d oman ype Position
Sauk meen momen ee |
and drive device functions -> software update -> information electronics control |services -> error
module software update message
and drive device functions -> screen display function
Saga omnes fraser |
map display (MAP) function
er kee
> selecting telephone mode (TEL) function
ode dovetaeting” enone eterna Wntinaty
and drive device functions
a Ee
select radio mode (RADIO) function
Vehicle data
A6/A7/A8/e-tron / Q7 / Q8&
Sales types
aa faorfa
SE) CR
jax faorfa PR
jax faozofa |
lame _f2ozofa |
lamnvfaoigfa ff
jane faorgfa PR
lant [aozofa fT
[se faorja |

aoa |
PR numbers
?:with I8T ?:and ?:with 7UG ?:and ?:without I8V
?:or ?:with I8V
Control units
number version number version
Q3
Sales types
aoa |
aoa |
aia fT
PR numbers
with 1I8T
Control units
Diagnostic address Software part Software Hardware part Hardware
9 number version number version
Documents
note jpg

A Connection offline
Technical Service Bulletin Transaction No.: 2068233/4
91 MIB2+: toolbar resets, radio station issues, blue sheen on map, privacy popup, nav Release date: Mar 4, 2025
not in cluster, var. other malf.
Condition
REVISION HISTORY
revision [pate |rurpore
Revised Service (Updated Service information)
Revised Warranty (Updated warranty table)
01/31/2025 | Revised Warranty (Updated warranty table)
02/17/2023 | Revised header (Updated PR Code filter)
Customer states:
+ The quick access toolbar resets to default settings.
+ — Radio stations sporadically cannot be changed.
+ Ablue sheen is visible on top of the whole navigation map when the remaining range display is activated.
+ The privacy popup is always shown on startup, even after clicking “Do not show again’, if any privacy settings
are active.
+ The navigation guidance is no longer shown on the instrument cluster.
+ Various other MMI malfunctions.
Technical Background
Software issues may cause the unexpected behaviors listed under “Condition”.
Production Solution
MIB3 Infotainment system is introduced in series production.
Service
This bulletin replaces the following Pending Service Solutions:
* 2062388: PSS 91 MIB2+ High: The quick access toolbar resets itself to factory settings.
* 2062386: PSS 91 MIB2+ High: radio stations sporadically cannot be changed.
* 2062341: PSS 91 MIB2+: Blue sheen on top of the map display.
* 2060474: PSS 91 MIB2+ High: privacy pop-up is always shown with active privacy settings.
* 2060478: PSS 91 MIB2+ High: navigation guidance is no longer shown in the instrument cluster.
Required equipment:
+ ODIS Tester.

+ SVM code.
+ MIB2 High Software update on SD Card (see Required Parts and Tools or download the software from
MirrorServer using the SD Creator Program).

Prerequisites for update:
This update must only be performed after ensuring that field campaign 91X4 or 91Y3 (only for A8) has been
performed successfully.
From model year 2020 onwards, the systems were delivered from the factory with software version 2711; no
previous update is required in such cases and the update to version 2873 can be started.
IMPORTANT:
Before starting the update, please check whether control unit 1 for the Infotainment control module, J794 (diagnostic
address 005F) has software version 2711, 2716 or 2718.
If the software version is lower, this update must not be performed.
In this case, check whether field campaign 91X4 / 91Y3 has been performed successfully and perform the update
according to the relevant instructions if necessary.
If the software version 2711, 2716 or 2718 is installed on the Infotainment control module, J794 (diagnostic address
005F), proceed as follows:
Update:

Before performing the update, please deactivate the “automatic online map update” function in the MMI

under “Settings” >> “System update”. Reactivate the function after the update.
Update the MIB2+ High infotainment system using either Method 1 or Method 2 according to TSB 2056558: 97
MIB2+ Software Update Instructions and use the appropriate SVM code listed in the table below.
Method 1: Automated update using ODIS.
Method 2: Manual update due to SVM code or Server issues.
PR Number | SD Creator Part Number | SVM Code

A6/A7/A8/e-tron/Q7/Q8 4KO 906 961AC MH2PUS2873

AG/IAT/Q7/Q8 4KO 906 961 T MH2PUS2873
Replacing parts will not fix the problem. If parts are replaced without good reason, they will be charged back.
Warranty

Claim Type: + If the vehicle is outside of any warranty, this Technical Service Bulletin is

informational only.

Damage Code: L039
Labor Operations: Method 1: Automated update using ODIS
Software update 0151 0010 See SRT with
associated operations
Software update 0150 0060 Time stated on the
diagnostic protocol
Method 2: Manual update
Program display and operating unit 9196 2599 50 TU
GFF / Guided Functions 0150 0060 Time stated on the
diagnostic protocol
Charge Battery 2706 8950 See SRT with
associated operations
Claim Comment: As per TSB 2068233/4
All warranty claims submitted for payment must be in accordance with the Audi Warranty Policies and Procedures
Manual. Claims are subject to review or audit by Audi Warranty.
Required Parts and Tools
Mode! PR Code SD Card Quantity
AG/AT/A8/e-tron/Q7/Q8 4KO 906 961AC | 01 (Shop tool)
AG/AT/Q7/Q8 4KO 906 961 T =| 01 (Shop tool)
Additional Information
The following Technical Service Bulletin(s) may be necessary to complete this procedure:
+ TSB 2011732: 00 Software Version Management (SVM), operating instructions.
+ TSB 2056558: 97 M/B2+ Software Update Instructions.
+ TSB 2047812: 00 SD Creator: how to set up and use the SD Creator for obtaining vehicle software updates
via the MirrorServer.
All part and service references provided in this TSB (2068233) are subject to change and/or removal. Always check
with your Parts Department and/or ETKA for the latest information and parts bulletins. Please check the Repair
Manual for fasteners, bolts, nuts, and screws that require replacement during the repair.
©2025 Audi of America, Inc. All rights reserved. The information contained in this document is based on the latest
information available at the time of printing and is subject to the copyright and other intellectual property rights of
Audi of America, Inc., its affiliated companies, and its licensors. All rights are reserved to make changes at any time
without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form
or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be
modified or reposted to other sites, without the prior expressed written permission of the publisher.