NHTSA ID Number: 11007075
Manufacturer Communication Number: 24U04 S1
TSB/Document Date: 2024-09-05
Summary
Certain 2024 Model Year F-150, F-150 Lightning, F-150 Raptor, 2024 Ranger, 2024 Ranger Raptor Enhanced Pre-Delivery Inspection (PDI) Vehicles in this Update Before Sale program were selected for an enhanced pre-delivery inspection due to Ford
's continued focus on launch quality. Reason for supplement: updated tech instructions
Service Engineering Operations
Customer Service Division
Ford Motor Company
PO Box 1904
Dearborn, Michigan 48121
August 13, 2024
TO:
All U.S. Ford and Lincoln Dealers
SUBJECT:
NEW VEHICLE RECOMMENDED DEMONSTRATION / DELIVERY HOLD
Update Before Sale 24U04 – Supplement #1
Certain 2024 Model Year F-150, F-150 Lightning, F-150 Raptor, 2024 Ranger, 2024
Ranger Raptor
Enhanced Pre-Delivery Inspection (PDI)
REF:
NEW VEHICLE RECOMMENDED DEMONSTRATION / DELIVERY HOLD
Update Before Sale 24U04
Dated April 19, 2024
New! REASON FOR THIS SUPPLEMENT
• Technical Instructions: The technical instructions for F-150 have been updated to remove
the gear shifter stowage check and add clarification to the coolant level check.
PROGRAM TERMS
This program will be in effect through April 30, 2025, for certain unsold vehicles, or up to 60 days post
the warranty start date (to allow for sales reporting and claim processing).
AFFECTED VEHICLES
Model
Vehicle
Year
Assembly Plant
Build Dates
F-150
2024
Dearborn
August 29, 2023 through March 11, 2024
F-150
2024
Kansas City
September 6, 2023 through March 11, 2024
F-150 BEV
2024
Rouge Electrical
Vehicle Center
December 15, 2023 through March 19, 2024
Ranger
2024
Michigan
July 24, 2023 through March 4, 2024
Vehicles are identified in OASIS and FSA VIN Lists.
REASON FOR THIS PROGRAM
Vehicles in this Update Before Sale program were selected for an enhanced pre-delivery inspection
due to Ford's continued focus on launch quality.
SERVICE ACTION
Before demonstrating or delivering any new in-stock vehicles involved in this program, dealers are to
perform an Enhanced Pre-Delivery Inspection (PDI) checklist in addition to the standard PDI. This
service must be performed on all affected vehicles at no charge to the vehicle owner. For new vehicle
storage guidelines, refer to EFC13033, Storage Guidelines for New Vehicles.
OWNER NOTIFICATION MAILING SCHEDULE
Owner letters will not be mailed for this program.
Copyright 2024 Ford Motor Company
New! ATTACHMENTS
• Administrative Information
• Labor Allowances and Parts Ordering Information
• Technical Instructions
QUESTIONS & ASSISTANCE
For questions and assistance, contact the Special Service Support Center (SSSC) via the SSSC Web
Contact Site. The SSSC Web Contact Site can be accessed through the Professional Technician
System (PTS) website using the SSSC link listed at the bottom of the OASIS VIN report screen or
listed under the SSSC tab.
Customer Service Division
Copyright 2024 Ford Motor Company
Administrative Information
Page 1 of 1
Update Before Sale 24U04 – Supplement #1
OASIS ACTIVATION
OASIS was activated on April 19, 2024.
FSA VIN LISTS ACTIVATION
FSA VIN Lists were made available through https://web.fsavinlists.dealerconnection.com on April 19,
2024.
NOTE: Your FSA VIN Lists may contain owner names and addresses obtained from motor vehicle
registration records. The use of such motor vehicle registration data for any purpose other than in
connection with this program is a violation of law in several states, provinces, and countries.
Accordingly, you must limit the use of this listing to the follow-up necessary to complete this service
action.
STOCK VEHICLES
Correct all affected units in your new vehicle inventory before delivery.
BRANDED / SALVAGED TITLE VEHICLES
Affected branded / salvaged title vehicles are not eligible for this program.
OWNER REFUNDS
Refunds are not approved for this program.
RENTAL VEHICLES
Rental vehicles are not approved for this program.
ADDITIONAL REPAIR (LABOR TIME AND/OR PARTS)
No additional repairs are required to complete the FSA. Additional repairs identified while completing
the Enhanced PDI checklist should be managed as follows:
• For any required repairs, submit on a separate repair line following normal warranty-repair
process.
CLAIMS PREPARATION AND SUBMISSION
• Claim Entry: Enter claims using Dealer Management System (DMS) or One Warranty
Solution (OWS) online.
o When entering claims:
Claim type 31: Field Service Action.
Sub Code: 24U04
Customer Concern Code (CCC): A99 – Administrative, Maintenance, Misbuilt
Condition Code (CC): 82 – Freight/Postage/Maintenance
Causal Part Number: 1523200 Quantity 0.
o For additional claims preparation and submission information, refer to the Recall and
Customer Satisfaction Program (CSP) Repairs in the OWS User Guide.
Copyright 2024 Ford Motor Company
Labor Allowances and Parts Ordering Information
Page 1 of 1
Update Before Sale 24U04 – Supplement #1
LABOR ALLOWANCES
Description
Labor Operation
Labor Time
F-150 – All - Enhanced Pre-Delivery Inspection
24U04B
0.4 Hours
Ranger – All - Enhanced Pre-Delivery Inspection
24U04C
0.4 Hours
PARTS REQUIREMENTS / ORDERING INFORMATION
Parts are not required to complete this inspection.
Copyright 2024 Ford Motor Company
TECHNICAL INSTRUCTIONS
PAGE 1 OF 7
UPDATE BEFORE SALE 24U04-S1
CERTAIN 2024 MODEL YEAR F-150 VEHICLES — ENHANCED PRE-DELIVERY
INSPECTION (PDI)
SERVICE PROCEDURE - All F-150 Vehicles
IMPORTANT! The Service Technician Specialty Training (STST) Competency 10 certification
requirement, for U.S. market only, will be enforced starting with repair orders
opened on or after April 1, 2024. Field Service Action (FSA) repairs will reject if
the repairing technician is not certified in STST Competency 10 FSA. See
Electronic Field Communication (EFC) 14251 for more details.
NOTE: Complete all of the inspection steps listed below. If a step fails or an issue is found,
document the step and/or issue, then continue to the next step.
1. With the Key on and Engine off, verify the seatbelt and door open chimes.
2. Verify the function of all four windows using the master switch (driver door window switch).
• Record the door that has any bounce back when powering the windows up.
3. Verify the display screen function. Check for lines, color and/or image distortion.
4. Press each gang switch individually and verify function. See Figure 1.
GANG
SWITCHES
24224B
FIGURE 1
CPR © 2024 FORD MOTOR COMPANY
DEARBORN, MICHIGAN 48121
08/2024
STUD FOR
TECHNICAL INSTRUCTIONS
PAGE 2 OF 7
UPDATE BEFORE SALE 24U04-S1
5. Verify proper operation of the 360° and center high mount stop lamp (CHMSL) camera display on the
12 inch screen by selecting each camera view. See Figure 2.
CAMERA
SWITCH
CAMERA
VIEWS
24224C
FIGURE 2
STUD FOR
MISSING NUT
STUD FOR
MISSING NUT
STUD FOR
MISSING NUT
PLACE COPY HERE
PLACE COPY HERE
CPR © 2024 FORD MOTOR COMPANY
DEARBORN, MICHIGAN 48121
08/2024
PLACE COPY HERE
TECHNICAL INSTRUCTIONS
PAGE 3 OF 7
UPDATE BEFORE SALE 24U04-S1
6. Activate the windshield wiper mister and cycle through the windshield wiper speeds to verify function.
NOTE: The vehicle should be at or near operating temperature.
7. Verify the Heating, Ventilation and Air Conditioning (HVAC) system performance.
• Set heat output at 85° F and check that the air blows hot.
• Set air conditioning output at 68° F and check that air blows cold.
8. Inspect the Instrument Panel (IP) for any loose damaged or missing trim.
9. Inspect the Left Hand (LH) IP topper for jagged edges. See Figure 3.
PASS
DOES NOT PASS
JAGGED
EDGE
24224D
FIGURE 3
10. Verify the LH IP topper is fully seated. See Figure 4.
PASS
DOES NOT PASS
IP TOPPER NOT
FULLY SEATED
STUD FOR
MISSING
24224E NUT
FIGURE 4
STUD FOR
MISSING NUT
STUD FOR
MISSING NUT
CPR © 2024 FORD MOTOR COMPANY
DEARBORN, MICHIGAN 48121
08/2024
PLACE COPY HERE
PLACE COPY HERE
PLACE COPY HERE
TECHNICAL INSTRUCTIONS
PAGE 4 OF 7
UPDATE BEFORE SALE 24U04-S1
11. If equipped, verify the function of the Heads Up Display (HUD). See Figure 5.
HUD
24224F
FIGURE 5
12. If equipped, press the active exhaust mode button on the steering wheel until the cluster display
shows Baja mode. See Figure 6.
• With the vehicle running, press the accelerator pedal to increase engine RPM. Listen for a
metallic, metal-on-metal type sound.
STUD FOR
MISSING NUT
ACTIVE EXHAUST MODE BUTTON
FIGURE 6
STUD
FOR
24224G
MISSING NUT
STUD FOR
MISSING NUT
PLACE COPY HERE
PLACE COPY HERE
PLACE COPY HERE
CPR © 2024 FORD MOTOR COMPANY
DEARBORN, MICHIGAN 48121
08/2024
STUD FOR
MISSING NUT
STUD FOR
MISSING NUT
TECHNICAL INSTRUCTIONS
PAGE 5 OF 7
UPDATE BEFORE SALE 24U04-S1
13. Verify the four wheel drive buttons are functional. See Figure 7.
a. Cycle through all four mode buttons checking for sticking.
b. Verify each button light turns on and off.
24224H
FIGURE 7
14. Verify the function of the glove compartment and if equipped the upper storage compartment.
See Figure 8.
UPPER STORAGE
COMPARTMENT
GLOVE
COMPARTMENT
STUD FOR
MISSING NUT
STUD FOR
MISSING NUT
24224I
FIGURE 8
STUD FOR
MISSING NUT
PLACE COPY HERE
PLACE COPY HERE
PLACE COPY HERE
CPR © 2024 FORD MOTOR COMPANY
DEARBORN, MICHIGAN 48121
08/2024
TECHNICAL INSTRUCTIONS
PAGE 6 OF 7
UPDATE BEFORE SALE 24U04-S1
15. Verify proper operation of ALL the power points inside the cab, frunk (BEV Only) and the bed (if
equipped) with a multimeter.
• 110 Outlets (110V tester is acceptable, but cannot be a ground fault tester with a trip switch).
• 12 volt power point
• USB ports
• USB-C
16. Verify keyless entry keypad function and button light up when pressed. See Figure 9.
KEYLESS ENTRY
KEYPAD
24224K
FIGURE 9
17. Verify the headlamp, tail lamp and CHMSL for fit, function and any signs of obvious damage.
See Figure 10.
NOTE: Headlamps shown, inspection for tail lamps and CHMSL similar.
STUD FOR
MISSING NUT
STUD FOR
MISSING NUT
STUD FOR
24224J NUT
MISSING
FIGURE 10
PLACE COPY HERE
PLACE COPY HERE
CPR © 2024 FORD MOTOR COMPANY
DEARBORN, MICHIGAN 48121
08/2024
PLACE COPY HERE
TECHNICAL INSTRUCTIONS
PAGE 7 OF 7
UPDATE BEFORE SALE 24U04-S1
18. Verify all four doors open and close freely, without binding, rubbing and/or noise.
19. Check that all the badges are correct, present and undamaged.
• Front Grill
• Fenders
• Charge Port (if equipped)
• Pick-up Box
20. Verify the front and rear bumper parking aid sensors are fully seated.
21. Check the tailgate for function.
a. Cycle open and close a total of 5 times.
- Advanced VCI Box, Industry-leading J2534 Pass-Thru...
- High-Speed OEM-Level Diagnostics & Programming: Unlock true...
- Coverage for 17 Car Brands & Ultra Reliability: Works...
- User-Friendly RLink Platform & Expert Support: TOPDON’s...
- 6.6 ft USB-C Cable & Portable Storage Case: The RLink J...
Last update on 2026-06-23 / Affiliate links / Images from Amazon Product Advertising API
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: 24U04 S1
Replacement Service Bulletin Number:
MFR Communication Date: 2024-08-13
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: UNKNOWN OR OTHER
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [2026 Top-Tier Hardware and Software Upgrade]: Topdon ArtiDiag900 Lite scanner has enhanced hardware and latest features, including Android 11.0, 5x faster CPU, 10000mAh battery for 12 hours of continuous operation, stable wireless diagnosis with Bluetooth 5.0, 8-inch touchscreen. Added bi-directional control, wireless diagnosis, battery testing (optional), and DTC repair guide
- [TOPDON Bidirectional Scan Tool]: This bidirectional obd2 scanner sends commands to the vehicle's ECU for active testing, enabling users to accurately and quickly locate faulty components such as injectors, coolant pumps, windows, wipers, headlights, mirrors, etc. The bidirectional control scanner is the ideal choice for workshops/automotive repair shops as it significantly reduces mechanic's diagnostic time.
- [Wireless Bluetooth Diagnostic Experience]: The AD900 Lite scan tool comes with a Bluetooth 5.0 VCI, supporting a wireless diagnostic range of up to 33 feet (10 meters), allowing you to diagnose without being confined to cables or tight spaces. Stable and fast wireless diagnosis provides a comfortable repair environment. It also offers VCI cables to increase connectivity options.
- [DTC Repair Guide Function]: Easily diagnose issues with your vehicle and receive guidance on repairs with the topdon scan tool's fault code definitions for all systems,maximize your diagnostic capabilities. This function is compatible with Chrysler
/Dodge/Jeep/Fiat 2010-2014 and expanding with continual updates,the AritDiag 900 Lite car diagnostic scanner is the must-have tool for any technician or DIY enthusiast. - [OE-Level Full System Diagnostics]:AritDiag900 Lite full system diagnostic scanner can scan ALL available modules(Engine, Transmission, Airbag, ABS, ESP, TPMS, Gateway, Steering, Radio, Air conditioning, ect.) to✔read ECU info, ✔read/clear codes, ✔view live data stream, ✔retrieves freeze-frame, ✔perform active tests, and more. With just a simple click, it provides you with accurate and in-depth diagnostics.
- Dual WiFi & 10.1" Touchscreen: Provides a stable, high-speed wireless link 3x faster than bluetooth, and a responsive, professional interface. Topdon ONE obd2 scanner diagnostic tool ensures smooth, non-lagging diagnostic scan, boosting mechanic efficiency
- J2534 Pass-Thru Support: The included ONE VCI supports the J2534 standard, allowing it to function as a pass-thru device when paired with OEM diagnostic software.Through TOPDON’s RLink platform, technicians can perform dealer-level coding, expanding in-house capabilities without investing in multiple factory automotive scan tools
- OE Topology Mapping: Visualize the vehicle’s ECU network exactly as it’s built.Zoom, pan, and highlight specific modules to pinpoint component issues with precision.Topology mapping displays real-time communication between modules
- 50 Plus Service Functions: Covers high-demand services like ADAS calibration, DPF regen, TPMS reset, ABS bleed, and throttle adaptation.Expands your service menu, allows you to charge premium rates, and turns away zero jobs due to lack of tooling. Vehicle-specific functionality may vary
- Advaned ECU Coding: 10 of the most serviced brands in North America, including full ECU coding and flash hidden support for BMW, VW, Au-di, Benz, Porsche, Toyota, Ni ssan and more. Enables module replacement, feature customization, and personal settings with automatic backup or restore.Lets your shop safely offer high-margin customization services, attracting more customers and boosting profit
- Bi-Directional Control, Quickly Locate Problems: Turn your phone into a professional diagnostic tool. You can send commands from your phone to the ECU to test injectors, cooling fans, headlights, A/C clutch, windows, wipers, and more. See which one doesn't respond. Helps you quickly locate the problem and save time. No need to tear things apart, avoid blind disassembly.
- Flexible Subscription, Choose Advanced Features as Needed: TopScan Lite provides free-for-life access to core diagnostics, including full system scan, code reading, performance tests, and repair information. After purchase, advanced features (bi-directional control, service operations, live data, code clearing, and AI functions) are free-for-the-first-year. After the first year, if you want to use advanced features, you need to subscribe on a monthly, quarterly, or yearly basis. As new models and reset functions are updated, the tool will also be continuously upgraded.
- Full System Diagnostics, No Fault Hides: Unlike basic diagnostic tools that only cover 4 systems, TopScan can scan all systems. Read and clear trouble codes, view live data streams, and generate a complete vehicle health report – all issues are clear at a glance. Covers 10,000+ vehicle models and is compatible with 99.99% of vehicles.
- AI Assistant - TopFix: Think of TopFix as your personal AI mechanic. It leverages a repair database and OEM data to deliver clear, step-by-step repair solutions. Features include AI Q&A, one-click translation, and a full repair log, making your diagnostic process simpler and more efficient.
- 8+ Hot Resets, Keep Your Car in Top Shape: One-tap resets for oil, throttle, EPB, steering angle, DPF, ABS, BMS, and airbag. It enables car owners to easily perform essential maintenance, ensuring the vehicle stays in optimal condition and extends its service life.
Last update on 2026-06-23 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.