Service Engineering Operations
Customer Service Division

Ford Motor Company
PO Box 1904
Dearborn, Michigan 48121

August 22, 2024

TO:

All U.S. Ford and Lincoln Dealers

SUBJECT:

NEW VEHICLE RECOMMENDED DEMONSTRATION / DELIVERY HOLD
Customer Satisfaction Program 24B48
Certain 2024 Model Year F-150 Lightning Vehicles
Powertrain Control Module Software Update

PROGRAM TERMS
This program will be in effect through August 31, 2025. There is no mileage limit for this program.
AFFECTED VEHICLES
Vehicle

Model Year

Assembly Plant

Build Dates

F-150
Lightning

2024

Rouge Electrical
Vehicle Center

December 15, 2023 through April 4, 2024

US population of affected vehicles: 6,942. Affected vehicles are identified in OASIS and FSA VIN
Lists.
REASON FOR THIS PROGRAM
In some of the affected vehicles, customers may not be able to save their vehicle’s charge locations
and charging times. Customers can still plug the vehicle in and charge normally, but the customer
cannot schedule a charging location and time because the charging location and time cannot be
saved.
SERVICE ACTION
Before demonstrating or delivering any new in-stock vehicles involved in this program, dealers are to
update the Powertrain Control Module (PCM). This service must be performed on all affected vehicles
at no charge to the vehicle owner. For new vehicle storage guidelines, refer to EFC13033, Storage
Guidelines for New Vehicles.
To assist vehicle owners to have this repair completed when parts are available, dealers should:
• Arrange for a mobile repair at the owner’s location, or:
• Arrange to pick up the owner’s vehicle and drive it to the dealership for repairs
• Pick-Up & Delivery, and mobile service should be made available for all customers. Refer to
the Rental and Claiming sections for further details.
1. “Completion Status”, which should show “Campaign Successful”. The “Release Notes”
will also indicate that the campaign was successfully downloaded onto the vehicle.
(Note: the FSA may still show as open in the Outstanding Field Service Actions section
of PTS even though the OTA update was successfully downloaded onto the vehicle.
This FSA will eventually be removed from the Outstanding Field Service Actions
screen of PTS.).
OWNER NOTIFICATION MAILING SCHEDULE
Owner letters are expected to be mailed the week of September 2, 2024. Dealers should repair any
affected vehicles that arrive at their dealerships, whether or not the customer has received a letter.
 Copyright 2024 Ford Motor Company

ATTACHMENTS
• Administrative Information
• Labor Allowances and Parts Ordering Information
• Technical Instructions
• Mobile Service Repair Assessment
• Mobile Repair/Vehicle Pick-Up & Delivery Record
• Owner Notification Letter
QUESTIONS & ASSISTANCE
For questions and assistance, contact the Special Service Support Center (SSSC) via the SSSC Web
Contact Site. The SSSC Web Contact Site can be accessed through the Professional Technician
System (PTS) website using the SSSC link listed at the bottom of the OASIS VIN report screen or
listed under the SSSC tab.
Customer Service Division

 Copyright 2024 Ford Motor Company

Administrative Information
Page 1 of 4
Customer Satisfaction Program 24B48
MOBILE SERVICE REPAIR ASSESSMENT LEVEL
• All repairs in this program have the following assessment level.
- Mobile Reprogramming
MOBILE REPAIR RECOMMENDATIONS
• Confirm with the customer a mobile repair is feasible.
• Check OASIS before going to the customer’s home or business to confirm if any other
outstanding FSA needs to be completed.
• Transportation – due to the simplicity of this repair, a specialty vehicle is not required.
MOBILE REPAIR ADDITIONAL INFORMATION
Please ensure the technician brings the following to the mobile repair destination:
• Printed Technical Instructions.
• Printed Repair/Work Order or any other necessary documentation as customer copy(s)
o Documents could also be emailed to the customer.
• Shirt/uniform and vehicle graphic with the dealership or Ford logos are recommended.
MOBILE REPAIR QUESTIONS AND ASSISTANCE
• For questions and assistance, contact the Special Service Support Center (SSSC) via the
SSSC Web Contact Site. Work with Dealership warranty administrator to create a SSSC
contact ID#.
• Once an SSSC agent responds to the new contact ID#, you may opt to call the SSSC hotline:
(800) 325-5621.
OASIS ACTIVATION
OASIS will be activated on August 22, 2024.
FSA VIN LISTS ACTIVATION
FSA VIN Lists will be available through https://web.fsavinlists.dealerconnection.com on August 22,
2024. Owner names and addresses will be available by September 16, 2024.
NOTE: Your FSA VIN Lists may contain owner names and addresses obtained from motor vehicle
registration records. The use of such motor vehicle registration data for any purpose other than in
connection with this program is a violation of law in several states, provinces, and countries.
Accordingly, you must limit the use of this listing to the follow-up necessary to complete this service
action.
SOLD VEHICLES
• Owners of affected vehicles will be directed to dealers for repairs.
• Immediately contact any of your affected customers whose vehicles are not on your VIN list
but are identified in OASIS. Give the customer a copy of the Owner Notification Letter (when
available) and schedule a service date.
• Correct other affected vehicles identified in OASIS which are brought to your dealership.
• Dealers are to prioritize repairs of customer vehicles over repairs of new and used vehicle
inventory.

 Copyright 2024 Ford Motor Company

Administrative Information
Page 2 of 4
Customer Satisfaction Program 24B48
STOCK VEHICLES
• Correct all affected units in your new vehicle inventory before delivery.
• Use OASIS to identify any affected vehicles in your used vehicle inventory.
BRANDED / SALVAGED TITLE VEHICLES
Affected branded / salvaged title vehicles are eligible for this service action.
OWNER REFUNDS
Refunds are not approved for this program.
RENTAL VEHICLES
Rental vehicles are not approved for this program.
MOBILE REPAIR CLAIMING QUESTIONS
Dealers participating in the Remote Experience Program:
• Ford Dealers - refer to EFC14125, 2024 Remote Experience Program.
• Lincoln Retailers - refer to EFC14164, 2024 Remote Experience Program.
Dealers NOT participating in the 2024 Remote Experience Program:
• For questions and assistance, contact the Special Service Support Center (SSSC) via the
SSSC Web Contact Site. Work with the Dealership warranty administrator to create an SSSC
contact ID#.
• Once an SSSC agent responds to the new contact ID#, you may opt to call the SSSC hotline:
(800) 325-5621.
FORD PICK-UP & DELIVERY
• Dealers participating in the Remote Experience Program –
o Refer to EFC14125, 2024 Remote Experience Program, Pick-Up & Delivery (PDL)
Offset section for additional details.
• Dealers NOT participating in the Remote Experience Program –
o Dealers may claim one-half labor hour per repair for vehicle Pick-Up & Delivery
services.
o Dealers must retain a Vehicle Pick-Up & Delivery Record with the repair order
documentation.

 Copyright 2024 Ford Motor Company

Administrative Information
Page 3 of 4
Customer Satisfaction Program 24B48
ADDITIONAL REPAIR (LABOR TIME AND/OR PARTS)
Additional repairs identified as necessary to complete the FSA should be managed as follows:
• For related damage and access time requirements, refer to the Warranty and Policy Manual /
Section 6 – Ford & Lincoln Program Policies / General Information & Special Circumstances
for FSAs / Related Damage.
• For vehicles within new vehicle bumper-to-bumper warranty coverage, no SSSC approval is
required, although related damage must be on a separate repair line with the “Related
Damage” radio button checked.
o Ford vehicles – 3 years or 36,000 miles
• For vehicles outside new vehicle bumper-to-bumper warranty coverage, submit an Approval
Request to the SSSC Web Contact Site before completing the repair.
CLAIMS PREPARATION AND SUBMISSION
• Technician Competency Requirement: The STST Competency 10 certification requirement
in the U.S. market only will be enforced starting with repair orders opened on or after April 1,
2024. FSA repairs will reject if the repairing technician is not certified in STST Competency 10
FSA. See EFC14251 for more details.
• Claim Entry: Enter claims using Dealer Management System (DMS) or One Warranty
Solution (OWS) online.
o When entering claims:
 Claim type 31: Field Service Action
 Sub Code: 24B48
 Customer Concern Code (CCC): D15
 Condition Code (CC): 04
 Causal Part Number: 12A650, Quantity 0
o For additional claims preparation and submission information, refer to the Recall and
Customer Satisfaction Program (CSP) Repairs in the OWS User Guide.
• Related Damage/Additional labor and/or parts: Must be claimed as Related Damage on a
separate repair line from the FSA with the same claim type and subcode as described in Claim
Entry above.
IMPORTANT: Click the Related Damage Indicator radio button.
• Ford Pick-Up & Delivery:
o Dealers participating in the Remote Experience Program –
 Refer to EFC14125, 2024 Remote Experience Program, Pick-Up & Delivery
(PDL) Offset section for additional details.
o Dealers NOT participating in the Remote Experience Program –
 Dealers may claim one-half labor hour per repair for vehicle Pick-Up & Delivery
services.
 Dealers must retain a Vehicle Pick-Up & Delivery Record with the repair order
documentation.

 Copyright 2024 Ford Motor Company

Administrative Information
Page 4 of 4
Customer Satisfaction Program 24B48
CLAIMS PREPARATION AND SUBMISSION (Continued)
• Mobile Repair:
o Dealers participating in the Remote Experience Program –
 Ford Dealers - refer to EFC14125, 2024 Remote Experience Program.
 Lincoln Retailers - refer to EFC14164, 2024 Remote Experience Program.
o Dealers NOT participating in the Remote Experience Program –
 Mobile repair allowances can be claimed for dealer-performed mobile repairs.
Dealers that are working with Ford-contracted mobile repair companies should
refer to those companies for claiming instructions.
 For dealer-performed mobile repairs, retain a copy of the Service Management
signed record (see Repair Procedure Improvement & Revised Labor Time),
with the repair order documentation.
 Claim the mobile repair allowance Labor Operation Code 24B48MM along with
the applicable Labor Operation Code for the repair (refer to the Labor
Allowances table in Labor Allowances and Parts Ordering Information).

 Copyright 2024 Ford Motor Company

Labor Allowances and Parts Ordering Information
Page 1 of 1
Customer Satisfaction Program 24B48
LABOR ALLOWANCES
Description

Labor Operation

Labor Time

24B48B

0.6 Hours

Mobile Service:
This allowance is only for non-eligible 2024 Remote
Experience Program Dealers.
Can be used when the repair takes place away from the
dealership.
If Additional Time is Required Due to Travel, Please Submit
an SSSC Approval Form.

24B48MM

0.5 Hours

Vehicle Pick-Up & Delivery Allowance:
This allowance is only for non-eligible 2024 Remote
Experience Program Dealers.
NOTE: This allowance is for dealer-performed vehicle PickUp & Delivery for dealership repairs only. Can only be
claimed once, regardless of outstanding FSAs repaired.

24B48PP

0.5 Hours

Update the vehicle’s PCM software to the latest level

PARTS REQUIREMENTS / ORDERING INFORMATION
Parts are not required to complete this repair.

 Copyright 2024 Ford Motor Company

TECHNICAL INSTRUCTIONS
PAGE 1 OF 3
CUSTOMER SATISFACTION PROGRAM 24B48

CERTAIN 2024 MODEL YEAR F-150 LIGHTNING VEHICLES — POWERTRAIN
CONTROL MODULE SOFTWARE UPDATE
SERVICE PROCEDURE
IMPORTANT! The Service Technician Specialty Training (STST) Competency 10 certification

requirement, for U.S. market only, will be enforced starting with repair orders
opened on or after April 1, 2024. Field Service Action (FSA) repairs will reject if the
repairing technician is not certified in STST Competency 10 FSA. See Electronic

Field Communication (EFC) 14251 for more details.

Module Programming
NOTE: Program appropriate vehicle modules before performing diagnostics and clear all Diagnostic
Trouble Codes (DTCs) after programming. For DTCs generated after programming, follow normal
diagnostic service procedures.
1. Connect a battery charger to the 12 Volt (V) battery.
• Use of a heavy-duty charger is recommended to maintain proper battery voltage during this
procedure.
NOTE: Verify the negative cable of the charger is installed on a chassis or engine ground and not
the 12V battery negative terminal to prevent the battery saver mode from activating on the
vehicle.
NOTE: If the diagnostic software does not load or if the vehicle cannot be identified properly, make sure
there is a good internet connection and the Vehicle Communication Module (VCM) is properly
connected to the Data Link Connector (DLC).
2. Log into Ford Diagnostic and Repair System (FDRS).
NOTE: Vehicle information is automatically retrieved by the diagnostic software and a Network Test is
run. Vehicle identification data appears on the screen when this is complete.
3. Click Read VIN from Vehicle or manually enter the Vehicle Identification Number (VIN).
NOTE: Available modules are shown on the left hand (LH) side of the screen and available procedures
are listed on the right hand (RH) side of the screen. Modules that are communicating are
highlighted in green.
4. Select Toolbox tab.
5. From the list on the LH side of the screen, select the PCM.
6. From the list on the RH side of the screen, select PCM - Powertrain Control Module (PCM) Software
Update.
7. Click RUN. Follow all on-screen instructions carefully. Then, continue on next page.
CPR © 2024 FORD MOTOR COMPANY
DEARBORN, MICHIGAN 48121
08/2024

TECHNICAL INSTRUCTIONS
PAGE 2 OF 3
CUSTOMER SATISFACTION PROGRAM 24B48

NOTE: After the programming of the PCM, the FDRS will automatically prompt you to update the
necessary modules based on the vehicles options and calibration levels. Follow the on-screen
instructions to complete the update. You may be prompted to update one or more of the following
modules.

• Anti-lock brake system (ABS) module
• Secondary on-board diagnostic control module B (SOBDMB)
• Secondary on-board diagnostic control module C (SOBDMC)
• Secondary on-board diagnostic control module A (SOBDMA)
• Battery energy control module (BECM)

8. From the list on the RH side of the screen, select Self-Test and click RUN.
9. Click the Run Selected Tests button in the lower right.
10. Click the Clear & Retest button at the top of the screen to clear DTCs in all modules.
11. Disconnect the battery charger from the 12V battery once the programming has completed.

Important Information for Module Programming

NOTE: When programming a module, use the following basic checks to ensure programming completes
without errors.
• Make sure the 12V battery is fully charged before carrying out the programming steps and connect
FDRS/scan tool to a power source.
NOTE: A good internet connection is necessary to identify the vehicle and to load the diagnostic software.
• Inspect the Vehicle Communication Module II (VCM II)/Vehicle Communication Module III (VCM III) or
the Vehicle Communication and Measurement Module (VCMM) and the cables for any damage. Make
sure scan tool connections are not interrupted during programming.
• A hardwired connection is strongly recommended.
• Turn off all unnecessary accessories (radio, heated/cooled seats, headlamps, interior lamps, HVAC
system, etc.) and close doors.
• Turn the accessories back on after programming has completed.
• Disconnect/depower any aftermarket accessories (remote start, alarm, power inverter, CB radio,etc.).
• Follow all scan tool on-screen instructions carefully.
• Disable FDRS/scan tool sleep mode, screensaver, hibernation modes.
• Create all sessions key on engine off (KOEO). Starting the vehicle before creating a session will cause
errors within the programming inhale process.

CPR © 2024 FORD MOTOR COMPANY
DEARBORN, MICHIGAN 48121
08/2024

TECHNICAL INSTRUCTIONS
PAGE 3 OF 3
CUSTOMER SATISFACTION PROGRAM 24B48

Recovering a module when programming has resulted in a blank module
a. Disconnect the VCM II/VCM III or the VCMM from the data link connector (DLC) and your computer.
b. After ten seconds, reconnect the VCMII/VCMIII or the VCMM to the DLC and the PC. Launch FDRS.
The VCMII/VCMIII or the VCMM icon should turn green in the bottom right corner of the screen. If it
does not, troubleshoot the FDRS to VCM connection.
c. If you are using the same FDRS as the initial programming attempt, select the appropriate VIN from
the Vehicle Identification menu. If you are using a different FDRS, select “Read VIN from Vehicle”
and proceed through the Network Test.
d. In the Toolbox menu, navigate to the failed module and Download/Run Programmable Module
Installation (PMI). Follow the on-screen prompts. When asked if the original module is installed,
select “No” and continue through the installation application.
e. Once programming has completed, a screen may list additional steps required to complete the
programming process. Make sure all applicable steps are followed in order.

CPR © 2024 FORD MOTOR COMPANY
DEARBORN, MICHIGAN 48121
08/2024

Mobile Service Repair Assessment
Page 1 of 2
NEW VEHICLE RECOMMENDED DEMONSTRATION / DELIVERY HOLD
Customer Satisfaction Program 24B48
Certain 2024 Model Year F-150 Lightning Vehicles
Powertrain Control Module Software Update
Mobile Service Repair Assessment
Assessment levels have been identified to help determine the ease of performing eligible mobile
service repairs for a Field Service Action (FSA) outside of the dealership service facility.
Dealer Bulletin
Within the Administrative Information Attachment of the dealer bulletin a mobile service repair
assessment level(s) will be provided. These assessment levels have been determined using the
amount of time, equipment and labor identified to perform the intended service action.
Assessment Levels
- Mobile Reprogramming
- Light Mobile Service
- Enhanced Mobile Service
- Advanced Mobile Service
- Wheel and Tire Mobile Service
- Not a Mobile Service Repair
Description of each level that is used to determine the overall assessment.
– Mobile Reprogramming
• Module Programming or similar type services
• Minimum tools maybe required other than an IDS/FDRS setup
• FDRS programming that requires internet connection (wi-fi or mobile hotspot)
• Make sure vehicle has a charge port to ensure battery voltage is maintained during
flashing of the module(s)
• Repairs not greater than 1 hour in length (including time to wait for programming)
Note: The location will need a charging station or wall box to maintain the 12-volt battery.
•
•
•
•

– Light Mobile Service
Interior repair procedures that do not require seat, dash, or headliner removal
Under hood repairs that do not require large component removal
Exterior repairs that do not require large component/panel removal
Repairs may require standard hand tools (Access to a Technician starter kit or similar)

 Copyright 2024 Ford Motor Company

Mobile Service Repair Assessment
Page 2 of 2
NEW VEHICLE RECOMMENDED DEMONSTRATION / DELIVERY HOLD
Customer Satisfaction Program 24B48
Certain 2024 Model Year F-150 Lightning Vehicles
Powertrain Control Module Software Update
– Enhanced Mobile Service
• A two-person process is required anytime a procedure requires work under the
vehicle
• Brake Inspection and Brake Repair/Replacement
• Limited Suspension Component replacement (no alignment)
• Under Vehicle access for limited repairs (no large component removal)
• Vehicle Check Up - VCU
• Pre-Delivery Inspection - PDI
• Used Car Inspection/Presale Inspection
• May require floor jack, jack stands, and impact tools
Note: Wheel lock may be required.
•
•
•

– Advanced Mobile Service
Fluid Exchange/Oil Change
Light Repairs
Brake Hydraulic Repairs

– Wheel and Tire Mobile Service
• Tire Removal from Wheel
• Tire Balancing
• Tire Repair
Note: Specialized Mobile Service unit and equipment including Tire balancer and Tire
Changer required.
– Not a Mobile Service Repair
• Large component removal
• BEV Battery Replacement
• Requires a vehicle hoist – to complete the repair (more than inspection)
• Required vehicle alignment
• Requires significant vehicle disassembly
• Repairs greater than 2-3 hours
• Any repairs that require M-Time
• Includes a service procedure where the vehicle owner may be distressed about the state
of their vehicle

 Copyright 2024 Ford Motor Company

Mobile or Pick-Up and Delivery Repair Record
Page 1 of 1
Customer Satisfaction Program 24B48

Mobile Repair / Vehicle Pick-Up and Delivery Record
VIN ____________________________ received (check one):
☐ Mobile Repair

☐ Pick-up and/or delivery service

As outlined below for the 24B48 Field Service Action program.
☐ Mobile Repair – Date: _______________
OR
☐ Pick-up

– Date: _______________

☐ Delivery

– Date: _______________

Repair Order #

Repair Order Date

Service Manager Signature

Date

 Copyright 2024 Ford Motor Company