NHTSA ID Number: 11006914
Manufacturer Communication Number: 2024.32_0824.pdf
TSB/Document Date: 2024-09-04
Summary
Tesla does not provide physical owner's manual copies. Instead, all available owner’s manual content is integrated into the vehicle software, and only the content relevant for a given vehicle, based on vehicle configuration and software version installed, is displayed on its touchscreen. This file contains all available owner’s manual content for the vehicle converted to PDF format, and given the distribution method and NHTSA’s submission format requirements, it is the best available representative copy of owner’s manual content. However, a customer who accesses the owner’s manual via their vehicle’s touchscreen would only see the parts of this PDF file that are relevant to their vehicle.
Seat position
Rear facing only*
Rear facing as long as possible, Forward facing
then forward facing*
Recommended attachment
method
If combined weight of child
and safety seat is up to
65 lbs (29 kg), attach using
either LATCH** (lower
anchor only) or the seat belt
only.*** If combined weight
of child and safety seat is
over 65 lbs (29 kg), attach
using the seat belt only.***
If combined weight of child and
safety seat is up to 65 lbs
(29 kg), attach using either
LATCH** (both lower anchors
and top tether anchor), or the
seat belt and upper tether
strap.*** If combined weight of
child and safety seat is over
65 lbs (29 kg), attach using the
seat belt and upper tether
strap.***
Secure the booster seat
using lower LATCH anchors
(if available) and then
restrain the child with the
seat belt. If the booster seat
is not equipped with LATCH
anchors, then secure the
booster seat with the child
using the seat belt. However,
if the combined weight of the
child and booster seat
exceeds 65 lbs (29 kg),
secure the booster seat with
the child using the seat belt
only.
* Many child safety seats currently available allow children to ride rear-facing using the child safety seat’s integrated 5-point
harness for a longer period of time BASED UPON SPECIFIC HEIGHT AND WEIGHT LIMITS. Keep your child in a rear facing seat
for as long as possible. CHECK THE CHILD SAFETY SEAT MANUFACTURER’S INSTRUCTIONS AND CAREFULLY FOLLOW ALL
INSTRUCTIONS.
** LATCH ("Lower Anchors and Tethers for Children") and ISOFIX are international
standards for attachment points for child
safety seats in passenger cars that enable compliant child safety seats to be quickly and safely secured. The system has
other regional names including LUAS ("Lower Universal Anchorage System") or Canfix in Canada. It has also been called the
"Universal Child Safety Seat System" or UCSSS.
*** Subject to instructions provided by the child safety seat manufacturer.
****Keep your child in a forward facing child safety seat with a harness and tether until the child reaches the child safety seat's
maximum allowable height or weight as specified by the manufacturer of the child safety seat.
NOTE: When installing a child restraint system, you must also buckle the seat belt to silence the seat belt warning chime.
WARNING: Do not use Easy Entry (as described in Driver Profiles on page 297) to automatically move the driver's seat to
the full rearward position if a child safety seat is installed on a rear seat behind the driver's seat. With reduced clearance,
the movement of the seat may impact a child's legs, cause injury, or dislodge the seat.
WARNING: Do not use LATCH anchors with child safety seats or booster seats that have an integral safety belt where
the combined weight of the child plus the child safety seat exceeds 65 lbs (29.5 kg).
WARNING: Laws that govern how and where children should be carried when traveling in a vehicle are subject to change.
It is the driver’s responsibility to keep up to date on, and comply with, all current regulations in the region(s) where
CybertruckModel SModel X is driven. To check the child passenger safety laws for states in the U.S., go to: http://
www.ghsa.org/html/stateinfo/laws/childsafety_laws.html.
Owner's Manual
165
Owners Manual
Seating Larger Children
If a child is too large to fit into a child safety seat, but too small to safely fit into the standard seat belts, use a booster seat
appropriate for the child’s age and size. Carefully follow the manufacturer’s instructions to secure the booster seat.
Installing Child Safety Seats
There are two general methods used to install child safety seats:
• Seat belt retained - these seats are secured using the vehicle’s seat belts.
• LATCH retained - these seats attach to anchor bars built into the vehicle’s rear seats.
Check the child safety seat manufacturer’s instructions and the table in this manual to determine which installation method to
use. Some child safety seats can be installed using either method. Always follow the child safety seat manufacturer’s
instructions.
Installing Seat Belt Retained Child Seats
First, make sure that the child safety seat is appropriate for the weight, height, and age of the child.
Avoid dressing the child in bulky clothing and do not place any objects between the child and the restraint system.
Adjust harnesses for every child, every trip.
To securely hold child safety seats, all passenger seating positions are equipped with an automatic locking retractor (ALR)
that, by pulling the seat belt beyond the length needed for a typical adult occupant, locks the belt into place until the seat belt
is unbuckled and the webbing is fully retracted. The ALR mechanism operates as a ratchet, winding in slack and preventing the
seat belt from extending any further until it has been completely rewound. When installing a child safety seat, engage the
belt's automatic locking retractor by pulling the seat belt webbing until it is fully extended. The ALR system engages only
when the seat belt is at its maximum extension point.
NOTE: An automatic locking retractor disengages only when the seat belt is unbuckled and fully retracted. The belt can then
be worn as a normal belt, sliding freely in and out and locking tight only in an emergency. Once disengaged, the belt must be
fully extended to re-engage the locking mechanism whenever you install a child safety seat.
Always follow the detailed instructions provided by the child safety seat manufacturer. General guidelines are provided below.
1. Place the child safety seat in CybertruckModel SModel X, and fully extend the seat belt. Route and buckle the seat belt in
accordance with the child safety seat manufacturer’s instructions.
166
Owner's Manual
Owners Manual
2. Allow the seat belt to retract, and remove all slack in the seat belt while firmly pushing the child safety seat into the
CybertruckModel SModel X seat.
3. Once all slack has been removed, forcefully pull the seat belt webbing to confirm that the automatic locking retractor (ALR)
is engaged.
NOTE: The ALR disengages only after unbuckling and fully retracting the seat belt webbing. Once disengaged, the belt
must be fully extended to re-engage the locking mechanism.
4. Attach the upper tether strap(s), as required by the manufacturer of the child restraint system (see Attaching Upper Tether
Straps on page 169).
Installing ISOFIX (LATCH) Child Seats
Lower LATCH anchors are provided in the second row outboard seats. The anchors are located between the seat's back rest
and rear cushion. The exact location of each anchor is identified by a child safety seat identification button, illustrated below.
The button is located on the seat back, directly above its associated anchor.
In the rear seats, install LATCH child safety seats in the outboard seating positions only. Use only a seat belt retained seat in
the center position.
Owner's Manual
167
Owners Manual
To install a LATCH child safety seat, carefully read and follow the instructions provided by the manufacturer of the child
restraint system. These instructions describe how to slide the child restraint system onto the seat's anchor bars until you hear
it "click" into place. You may need to push the child restraint system firmly against the seat back to ensure it fits snugly.
Adjust until the child restraint system is fitted firmly against the seat back. Ensure the child restraint system fits snugly.
168
Owner's Manual
Owners Manual
Before seating a child, ensure that the child restraint system is securely installed. Grasp the front of the child restraint system
with one hand on each side, and attempt to:
• Twist the child restraint system from side to side.
• Pull the child restraint system away from the seat.
If the child restraint system moves away from the seat, both latches are not fully engaged onto the seat's anchor bars. You
must reinstall it and try again. It is critical that both latches on the child restraint system are fully engaged.
NOTE: Do not use LATCH anchors with child seats or booster seats that have an integrated safety belt where the combined
weight of the child plus the child restraint system exceeds 65 lbs (29.5 kg).
Attaching Upper Tether Straps
If an upper tether strap is provided, attach its hook to the anchor point located on the back of the rear seats.
NOTE: The location of anchor points may not be readily visible but can be found by identifying a slice in the seat's material.
WARNING: Tighten upper tether straps according to the instructions provided by the manufacturer of the child safety
seat.
WARNING: USE ONLY SEAT BELT RETAINED CHILD SAFETY SEATS IN THE CENTER SEATING POSITION.
For dual-strap tethers, position a strap on each side of the head support.
Owner's Manual
169
Owners Manual
Always position single-strap tethers to route over the top of the head support.
NOTE: To prevent the single-strap tether from moving side to side, the top of the head support deforms.
170
Owner's Manual
Owners Manual
Testing a Child Safety Seat
Before seating a child, always make sure the child safety seat is not loose:
1. Hold the child safety seat by the belt path and try to slide the safety seat from side to side and front to back.
2. If the seat moves more than one inch (2.5 cm), it is too loose. Tighten the belt or reconnect the LATCH retained child safety
seat.
3. If you are unable to reduce slack, try a different seat location or try another child safety seat.
Child Safety Seat Warnings
WARNING: Extreme hazard! Do not seat a child on the front passenger seat even if you are using a child safety seat. This
seat has an airbag in front of it. Although this airbag is disabled when CybertruckModel SModel X detects a lightweight
passenger, do not rely on technology to protect your child.
WARNING: Child restraint systems are designed to be secured in vehicle seats by lap belts or the lap belt portion of a
lap-shoulder belt. Children could be endangered in a crash if their child restraints are not properly secured in the
vehicle.
WARNING: According to collision statistics, children are safer when properly restrained in the rear seating positions than
in the front seating positions.
WARNING: Do not use a forward facing child safety seat until your child weighs over 20 lbs (9 kg) and can sit
independently. Up to the age of two, a child's spine and neck are not sufficiently developed to avoid injury in a frontal
impact.
WARNING: Do not allow a baby or infant to be held on an adult's lap. All children should be restrained in an appropriate
child safety seat at all times.
WARNING: To ensure children are safely seated, follow all instructions provided in this document and by the
manufacturer of the child safety seat.
WARNING: Children should ride in a rear facing child safety seat using the seat’s integrated 5-point harness for as long
as possible.
WARNING: Do not use seat belt extenders on a seat belt that is being used to install a child safety seat or booster seat.
WARNING: When seating larger children, make sure the child's head is supported and the child’s seat belt is properly
adjusted and fastened. The shoulder portion of the belt must be away from the face and neck, and the lap portion must
not be over the stomach.
WARNING: Never attach two child safety seats to one anchor point. In a collision, one anchor point may be incapable of
securing both seats.
WARNING: Child restraint anchors are designed to withstand only those loads imposed by correctly fitted child
restraints. Under no circumstances are they to be used for adult seat belts, harnesses, or for attaching other items or
equipment to the vehicle.
WARNING: Always check harnesses and tether straps for damage and wear.
WARNING: Never leave a child unattended, even if the child is secured in a child safety seat.
WARNING: Never use a child safety seat that has been involved in a collision. Have the seat inspected or replaced as
described in the child safety seat manufacturer’s instructions.
Owner's Manual
171
Owners Manual
Child Safety Seats
Passenger Front Airbag Must Be OFF
Your CybertruckModel SModel X seat belts are designed for adults and larger children. You must restrain infants and small
children in the rear seats only, and you must use a suitable child safety seat appropriate for the child’s age, weight, and size.
WARNING: Never seat a child in the front passenger seat, even if using a child restraint system.
WARNING: Never seat a child on a seat with an ACTIVE AIRBAG in front of it. DEATH or SERIOUS INJURY to the child
can occur.
Refer to the following label located on the sun visors.
NOTE: The image shown below is representative only and may not be identical to the label in your vehicle.
CybertruckModel SModel X has an occupancy sensor in the front passenger seat that controls the status of the passenger
front airbag (see Airbags on page 198).
When driving with a child seated on the front passenger seat (if permitted), always double-check the status
of the passenger front airbag to confirm that it is OFF.
To protect an adult subsequently occupying the front passenger seat, always double-check the passenger
front airbag to confirm that it is ON.
WARNING: It is the driver's responsibility to confirm that the passenger front airbag is OFF when a child is seated in the
front passenger seat. If the passenger front airbag fails to disable with a child seat in position, place the child and child
restraint system in the rear seat and use the mobile app to schedule a service appointment immediately.
WARNING: Always ensure that all CybertruckModel SModel X seats are locked in position before traveling. Failure to do
so increases the risk of injury. Pay attention to all warnings displayed on the touchscreen.
WARNING: Do not associate the Easy Entry setting with the driver's profile when a child is seated in a rear seat. Doing so
can cause the driver's seat to push against the child, especially when a child is seated in a forward-facing child seat or
booster seat. Do not rely on CybertruckModel SModel X to recognize or accommodate a child seated in the rear seats
while using this setting (see Driver Profiles on page 297).
172
Owner's Manual
Owners Manual
Choosing a Child Safety Seat
All children age 12 and under should ride in the rear seats. Always use a child safety seat suitable for a young child’s age and
weight. The following table is based on child safety seat recommendations determined by National Highway Traffic Safety
Administration (NHTSA). For more information, go to www.nhtsa.gov/ChildSafety/Guidance.
Category
Infants
Toddlers
Young children
Age
Birth to 1 year*
Over 1 year*
4 years and older, and less
than 57 in. (145 cm) tall
Weight
Up to at least 20 lbs (9 kg)*
Over 20 lbs (9 kg) (minimum)
and up to 40 lbs (18 kg)*
Over 40 lbs (18 kg)
Type of child safety seat
Rear facing (or convertible)
Forward facing (or
convertible)*
Forward facing or seat belt
retained booster seat****
Seat position
Rear facing only*
Rear facing as long as possible, Forward facing
then forward facing*
Recommended attachment
method
If combined weight of child
and safety seat is up to
65 lbs (29 kg), attach using
either LATCH** (lower
anchor only) or the seat belt
only.*** If combined weight
of child and safety seat is
over 65 lbs (29 kg), attach
using the seat belt only.***
If combined weight of child and
safety seat is up to 65 lbs
(29 kg), attach using either
LATCH** (both lower anchors
and top tether anchor), or the
seat belt and upper tether
strap.*** If combined weight of
child and safety seat is over
65 lbs (29 kg), attach using the
seat belt and upper tether
strap.***
Secure the booster seat
using lower LATCH anchors
(if available) and then
restrain the child with the
seat belt. If the booster seat
is not equipped with LATCH
anchors, then secure the
booster seat with the child
using the seat belt. However,
if the combined weight of the
child and booster seat
exceeds 65 lbs (29 kg),
secure the booster seat with
the child using the seat belt
only.
* Many child safety seats currently available allow children to ride rear-facing using the child safety seat’s integrated 5-point
harness for a longer period of time BASED UPON SPECIFIC HEIGHT AND WEIGHT LIMITS. Keep your child in a rear facing seat
for as long as possible. CHECK THE CHILD SAFETY SEAT MANUFACTURER’S INSTRUCTIONS AND CAREFULLY FOLLOW ALL
INSTRUCTIONS.
** LATCH ("Lower Anchors and Tethers for Children") and ISOFIX are international standards for attachment points for child
safety seats in passenger cars that enable compliant child safety seats to be quickly and safely secured. The system has
other regional names including LUAS ("Lower Universal Anchorage System") or Canfix in Canada. It has also been called the
"Universal Child Safety Seat System" or UCSSS.
*** Subject to instructions provided by the child safety seat manufacturer.
****Keep your child in a forward facing child safety seat with a harness and tether until the child reaches the child safety seat's
maximum allowable height or weight as specified by the manufacturer of the child safety seat.
NOTE: When installing a child restraint system, you must also buckle the seat belt to silence the seat belt warning chime.
WARNING: Do not use LATCH anchors with child safety seats or booster seats that have an integral safety belt where
the combined weight of the child plus the child safety seat exceeds 65 lbs (29.5 kg).
WARNING: Laws that govern how and where children should be carried when traveling in a vehicle are subject to change.
It is the driver’s responsibility to keep up to date on, and comply with, all current regulations in the region(s) where
CybertruckModel SModel X is driven. To check the child passenger safety laws for states in the U.S., go to: http://
www.ghsa.org/html/stateinfo/laws/childsafety_laws.html.
Owner's Manual
173
Owners Manual
Seating Larger Children
If a child is too large to fit into a child safety seat, but too small to safely fit into the standard seat belts, use a booster seat
appropriate for the child’s age and size. Carefully follow the manufacturer’s instructions to secure the booster seat.
Installing Child Safety Seats
There are two general methods used to install child safety seats:
• Seat belt retained - these seats are secured using the vehicle’s seat belts. All passenger seating positions in
CybertruckModel SModel X support the use of seat belt retained child safety seats.
• LATCH retained - these seats attach to anchor bars built into the vehicle’s rear seats. The rear outboard seating positions in
CybertruckModel SModel X support the use of LATCH retained child safety seats.
Check the child safety seat manufacturer’s instructions and the table in this manual to determine which installation method to
use. Some child safety seats can be installed using either method. Always follow the child safety seat manufacturer’s
instructions.
Installing Seat Belt Retained Child Seats
First, make sure that the child safety seat is appropriate for the weight, height, and age of the child.
Avoid dressing the child in bulky clothing and do not place any objects between the child and the restraint system.
Adjust harnesses for every child, every trip.
To securely hold child safety seats, all passenger seating positions are equipped with an automatic locking retractor (ALR)
feature that, by fully extracting the seat belt (beyond the length needed for a typical adult occupant), locks the belt into place
until the seat belt is unbuckled and the webbing is fully retracted. The ALR mechanism operates as a ratchet, winding in slack
and preventing the seat belt from extending any further until it has been completely rewound. When installing a child safety
seat with integrated restraints, engage the belt's automatic locking retractor by pulling the seat belt webbing until it is fully
extended. The ALR system engages only when the seat belt is at its maximum extension point.
The automatic locking retractor (ALR) feature is not used for booster seats in which a large child is restrained by the vehicle's
seat belts directly, and therefore not using a child safety seat's integrated restraints.
174
Owner's Manual
Owners Manual
NOTE: An automatic locking retractor disengages only when the seat belt is unbuckled and fully retracted. The belt can then
be worn as a normal belt, sliding freely in and out and locking tight only in an emergency. Once disengaged, the belt must be
fully extended to re-engage the locking mechanism whenever you install a child safety seat.
Always follow the detailed instructions provided by the child safety seat manufacturer. General guidelines are provided below.
1. Place the child safety seat in CybertruckModel SModel X, and fully extend the seat belt. Route and buckle the seat belt in
accordance with the child safety seat manufacturer’s instructions.
2. Allow the seat belt to retract, and remove all slack in the seat belt while firmly pushing the child safety seat into the
CybertruckModel SModel X seat.
3. Once all slack has been removed, forcefully pull the seat belt webbing to confirm that the automatic locking retractor (ALR)
is engaged.
NOTE: The ALR disengages only after unbuckling and fully retracting the seat belt webbing. Once disengaged, the belt
must be fully extended to re-engage the locking mechanism.
4. Attach the upper tether strap(s), as required by the manufacturer of the child restraint system (see Attaching Upper Tether
Straps on page 178).
Installing ISOFIX (LATCH) Child Seats
Lower LATCH anchors are provided in the rear outboard seats. The anchors are located between the seat's rear back rest and
lower cushion. The exact location of each anchor is identified by a child safety seat identification button, illustrated below. The
button is located on the seat back, directly above its associated anchor.
Owner's Manual
175
Owners Manual
In the rear seats, install LATCH child safety seats in the outboard seating positions only. Use only a seat belt retained seat in
the center position.
To install a LATCH child safety seat, lift the flap (if equipped) to allow access to the anchors.
176
Owner's Manual
Owners Manual
Carefully read and follow the instructions provided by the manufacturer of the child restraint system. The instructions
describe how to slide the child restraint system onto the seat’s anchor bars until you hear it "click" into place. You may need to
push the child restraint system firmly against the seat back to ensure it fits snugly. The flap (if equipped) remains open when
the child seat is installed.
Adjust until the child restraint system is fitted firmly against the seat back. Ensure the child restraint system fits snugly.
Owner's Manual
177
Owners Manual
Before seating a child, ensure that the child restraint system is securely installed. Grasp the front of the child restraint system
with one hand on each side, and attempt to:
• Twist the child restraint system from side to side.
• Pull the child restraint system away from the seat.
If the child restraint system moves away from the seat, both latches are not fully engaged onto the seat's anchor bars. You
must reinstall it and try again. It is critical that both latches on the child restraint system are fully engaged.
WARNING: Do not use LATCH anchors with child seats or booster seats that have an integrated safety belt where the
combined weight of the child plus the child restraint system exceeds 65 lbs (29.5 kg).
Attaching Upper Tether Straps
If an upper tether strap is provided, attach its hook to the anchor point located on the back of the rear seats.
NOTE: The location of anchor points may not be readily visible but can be found by identifying a slice in the seat's material.
WARNING: Tighten upper tether straps according to the instructions provided by the manufacturer of the child safety
seat.
WARNING: USE ONLY SEAT BELT RETAINED CHILD SAFETY SEATS IN THE CENTER SEATING POSITION.
For dual-strap tethers, position the straps as shown.
178
Owner's Manual
Owners Manual
Position single-strap tethers for the outboard seating positions to route on the outside of the head support. Position a single
strap in the center seating position to route over the top of the seat as illustrated.
NOTE: To prevent the single-strap tether in the center seating position from moving side to side, the top of the seat deforms.
Testing a Child Safety Seat
Before seating a child, always make sure the child safety seat is not loose:
1. Hold the child safety seat by the belt path and try to slide the safety seat from side to side and front to back.
2. If the seat moves more than one inch (2.5 cm), it is too loose. Tighten the belt or reconnect the LATCH retained child safety
seat.
3. If you are unable to reduce slack, try a different seat location or try another child safety seat.
Child Safety Seat Warnings
WARNING: Extreme hazard! Do not seat a child on the front passenger seat even if you are using a child safety seat. This
seat has an airbag in front of it. Although this airbag is disabled when CybertruckModel SModel X detects a lightweight
passenger, do not rely on technology to protect your child.
WARNING: Child restraint systems are designed to be secured in vehicle seats by lap belts or the lap belt portion of a
lap-shoulder belt. Children could be endangered in a crash if their child restraints are not properly secured in the
vehicle.
WARNING: According to collision statistics, children are safer when properly restrained in the rear seating positions than
in the front seating positions.
WARNING: Do not use a forward facing child safety seat until your child weighs over 20 lbs (9 kg) and can sit
independently. Up to the age of two, a child's spine and neck are not sufficiently developed to avoid injury in a frontal
impact.
Owner's Manual
179
Owners Manual
WARNING: Do not allow a baby or infant to be held on an adult's lap. All children should be restrained in an appropriate
child safety seat at all times.
WARNING: To ensure children are safely seated, follow all instructions provided in this document and by the
manufacturer of the child safety seat.
WARNING: Children should ride in a rear facing child safety seat using the seat’s integrated 5-point harness for as long
as possible.
WARNING: Do not use seat belt extenders on a seat belt that is being used to install a child safety seat or booster seat.
WARNING: When seating larger children, make sure the child's head is supported and the child’s seat belt is properly
adjusted and fastened. The shoulder portion of the belt must be away from the face and neck, and the lap portion must
not be over the stomach.
WARNING: Never attach two child safety seats to one anchor point. In a collision, one anchor point may be incapable of
securing both seats.
WARNING: Child restraint anchors are designed to withstand only those loads imposed by correctly fitted child
restraints. Under no circumstances are they to be used for adult seat belts, harnesses, or for attaching other items or
equipment to the vehicle.
WARNING: Always check harnesses and tether straps for damage and wear.
WARNING: Never leave a child unattended, even if the child is secured in a child safety seat.
WARNING: Never use a child safety seat that has been involved in a collision. Have the seat inspected or replaced as
described in the child safety seat manufacturer’s instructions.
180
Owner's Manual
Owners Manual
Tesla Built-In Rear Facing Child Seats
Usage Restrictions
The optional Tesla built-in rear facing child seats are child restraint systems and must only be used for children over 37"
(94 cm) tall and weighing between 35 and 77 lbs (16.2 to 35.2 kg).
Always ensure the top of the child’s head cannot contact the vehicle and that the child is seated comfortably with the seat
belts positioned and latched correctly. The child’s pelvis must be held securely in place by the lap belt. Follow all instructions
provided and do not use supplemental child safety seats in these seats.
NOTE: Whenever a child is seated in the Tesla built-in rear facing child seats, it is recommended that you set the climate
control system to draw outside air into CybertruckModel SModel X instead of recirculating the air. This draws more air into the
rear seating areas. See #unique_298 on page .
Opening
1. Remove the cover from the trunk floor and pull the strap to lift the seat assembly upward.
2. Push the seat assembly into position.
3. Undo the Velcro strap.
Owner's Manual
181
Owners Manual
4. Pull the handle to release the head supports from the seat back, then pull the head supports toward you to unfold them.
5. Raise the seat back to the upright position and push until it locks into position. Visually check to ensure that the retaining
catches are engaged.
6. Check that the seat back and seat base are securely retained in the upright position by trying to pull the seat back toward
you.
182
Owner's Manual
Owners Manual
Folding
CAUTION: Before folding the seats, fasten the seat belts to prevent them from getting trapped in the seat mechanism
and being damaged.
1. Pull the handle to release the seat back and pull the seat back fully forward.
2. Push the lever to release the head supports from the seat back, then fold back onto the seat.
3. Secure the Velcro strap.
4. Pull the strap at the rear of the seat to fold the seat assembly into the trunk floor.
Owner's Manual
183
Owners Manual
5. Replace the cover on the trunk floor.
Seating a Child
The Tesla built-in rear facing child seats are child restraint systems and must only be used for children over 37" (94 cm) tall
and weighing between 35 and 77 lbs (16.2 to 35.2 kg).
Always ensure the top of the child’s head cannot contact the vehicle and that the child is seated comfortably with the seat
belts positioned and latched correctly. The child’s pelvis must be held securely in place by the lap belt. Follow all instructions
provided and do not use supplemental child safety seats in these seats.
NOTE: Whenever a child is seated in the Tesla built-in rear facing child seats, it is recommended that you set the climate
control system to draw outside air into CybertruckModel SModel X instead of recirculating the air. This draws more air into the
rear seating areas. See #unique_298 on page .
1. Position the child in the seat with arms through the loops of the seat belts.
2. Connect the two halves of the seat belt tongue.
3. Insert the seat belt tongue into the buckle and ensure it is securely fastened.
184
Owner's Manual
Owners Manual
4. Adjust the shoulder belts so they run over the top of the child’s shoulders and away from the face.
5. Connect the chest clip and adjust it to be as high as possible without causing the shoulder belts to touch the child’s neck.
6. Pull the lower straps until the child is securely held in the seat.
7. Slide the shoulder clips into place to ensure the upper portion of the belts remain positioned over the child’s shoulders.
Owner's Manual
185
Owners Manual
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: 2024.32_0824.pdf
Replacement Service Bulletin Number:
MFR Communication Date: 2024-08-31
MFR Internal Campaign ID/Software Version: 07/16/1905
Communication Type: Over The Air
NHTSA Components: UNKNOWN OR OTHER
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
- Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
- 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
- Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission, ABS, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
- Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCA
Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU c0ding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations - 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCA AutoAuth: Now supports FCA SGW module for Chrysler, for Jeep, for Dodge (2018+), for Fiat (2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Pr0gramming): Allows for Ford, for Lincoln, and for Mazda ECU pr0gramming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order
- 39+ Services/Resets/Adaptations/Relearns/Calibrations: XTOOL D7S full system car scanner diagnostic tool tackles 99% of common car issues through its 36+ special functions, including Oil Reset, EPB, SAS, BMS, Throttle Reset, Injector C0ding, ABS Bleed, TPMS Reset, Power Balance, etc and also covers specific-vehicle functions like Crank Sensor Relearn, ABS Initialization, Cylinder Power Balance, Fuel Trim Reset, Idle Relearn etc. This car diagnostic scanner enhances efficiency, making repairs and maintenance hassle-free. Tip: DO NOT for All vehicles, please check compatibility first
- Cost-effective ECU C0ding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMW, for Benz and offline for BENZ, for MIT, along with PMI functions for Ford, for Mazda, and for Lincoln. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase
- OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
- 【✅Compared to BOSSCOMM IF742, IF745 Offers Full-System Diagnostics】The BOSSCOMM IF745 car diagnostic scanner is an upgraded model of IF742. In addition to supporting all OBD2 Code Reader functions and 6 reset options (ABS/EPB/SAS/BMS/Oil/Throttle), it expands diagnostics from 4 systems (Check Engine/ABS/SRS/Transmission) to vehicle All systems, including Steering, Suspension, and Body Electronics. This provides deeper, more comprehensive diagnostic capabilities.
- 【✨10 OBD2 Functions】The BOSSCOMM IF745 scan tool’s DTC Lookup instantly translates fault codes into user-friendly explanations, its I/M Readiness feature streamlines emissions testing with a single tap, and Freeze Frame lets you pinpoint the exact moment of a fault for in-depth root-cause diagnosis. Combined with a live data dashboard and advanced diagnostics (O2S, OBMon, EVAP), it delivers comprehensive insights for confident troubleshooting.
- 【✨Deep Diagnostics for All Vehicle System Modules】Beyond code reading/clearing and ECU information retrieval, our all-in-one data stream feature lets you inspect all current fault codes and their locations across the vehicle’s systems. This vehicle code reader helps you turn off dashboard warning lights and perform a comprehensive self-check of your car at home—no more back-and-forth trips to the repair shop or hefty inspection fees.
- 【✨6 Essential Resets: ABS Bleeding, Oil, EPB, SAS, Throttle, BMS】The BOSSCOMM IF745 obd2 scanner diagnostic tool swiftly purges air from brake lines to restore braking sensitivity, fine-tunes maintenance cycles to eliminate false alerts, resolves parking brake issues with one-click control, recalibrates steering sensors for stability, optimizes engine idling/acceleration for smoother performance, and deeply resets battery systems to extend lifespan and range via precise parameter adjustments.❗NOTE: Does NOT support bidirectional control, coding, or programming.
- 【✨10,000+ Car Models, AutoVIN, 13 Languages】The BOSSCOMM IF745 vehicle scanner diagnostic tool covers 73+ global car brands and offers support in 13 languages, making it perfect for DIYers, auto mechanics, or as a thoughtful gift. With a single-click AutoVIN feature, it instantly retrieves vehicle serial numbers, streamlining diagnostics for users globally. This adaptable tool balances user-friendliness with precision, catering to both personal and professional requirements.✅Unsure about compatibility? Compatibility will vary on vehicles' model and year, pls reach us via 📧 [email protected] 📧 before purchase.
This product presentation was made with AAWP plugin.