NHTSA ID Number: 11006914
Manufacturer Communication Number: 2024.32_0824.pdf
TSB/Document Date: 2024-09-04
Summary
Tesla
does not provide physical owner's manual copies. Instead, all available owner’s manual content is integrated into the vehicle software, and only the content relevant for a given vehicle, based on vehicle configuration and software version installed, is displayed on its touchscreen. This file contains all available owner’s manual content for the vehicle converted to PDF format, and given the distribution method and NHTSA’s submission format requirements, it is the best available representative copy of owner’s manual content. However, a customer who accesses the owner’s manual via their vehicle’s touchscreen would only see the parts of this PDF file that are relevant to their vehicle.
Owner's Manual
Owners Manual
To close the glovebox, push it upward until it latches into the closed position.
For additional glovebox security, touch Controls > Safety > Glovebox PIN to set a 4-digit PIN (see Glovebox PIN on page 418).
NOTE: If you leave the glovebox open, its light eventually turns off.
NOTE: The glovebox locks whenever closed and you lock CybertruckModel SModel X using the mobile app, key card, you
leave CybertruckModel SModel X carrying your phone key (if Walk-Away Door Lock is turned on), or if Valet mode is active
(see Valet Mode on page 300). It does not lock when CybertruckModel SModel X is locked by touching the lock icon on the
touchscreen.
WARNING: When driving, keep the glovebox closed to prevent injury to a passenger if a collision or sudden stop occurs.
Coat Hangers
Your CybertruckModel SModel X has a coat hanger on each side of the vehicle above the rear window in the second row, next
to the reading light. Push the coat hanger to release it. Push it again to retract it.
Owner's Manual
117
Owners Manual
Interior Storage
Glovebox
To open the glovebox, press the switch located on the side of the touchscreen. The glovebox locks whenever
CybertruckModel SModel X is locked externally, using the key or walk-away locking. It also locks when
CybertruckModel SModel X is in Valet mode (see Valet Mode on page 300). It does not lock when you lock
CybertruckModel SModel X using the lock icon on the touchscreen's status bar.
For additional glovebox security, touch Controls > Safety > Glovebox PIN to set a 4-digit PIN (see Glovebox PIN on page 418).
NOTE: If you leave the glovebox open, its light eventually turns off.
WARNING: When driving, keep the glovebox closed to prevent injury to a passenger if a collision or sudden stop occurs.
118
Owner's Manual
Owners Manual
Cup Holders
To expose a front cup holder, slide back the armrest.
To expose rear cup holders (if equipped), press and release the cup holder face plate located at the back of the center
console.
Seating and Safety Restraints
Front and Rear Seats
Correct Driving Position
The seat, head support, seat belt and airbags work together to maximize your safety. Using these correctly ensures greater
protection.
Owner's Manual
119
Owners Manual
Position the seat so you can wear the seat belt correctly, while being as far away from the front airbag as possible:
1. Sit upright with both feet on the floor and the seat back in an upright position.
2. Make sure you can easily reach the pedals and that your arms are slightly bent when holding the steering wheel. Your chest
should be at least 10 inches (25 cm) from the center of the airbag cover.
3. Place the shoulder section of the seat belt mid-way between your neck and your shoulder. Fit the lap section of the belt
tightly across your hips, not across your stomach.
CybertruckModel SModel X seats include integrated head supports that cannot be adjusted or removed.
120
Owner's Manual
Owners Manual
Adjusting the Driver’s Seat
1. Adjust lumbar support.
NOTE: If your Model S is equipped with adjustable head supports, this button is also used to move the head support up or
downThis button is also used to move the head support up or down (see Head Supports/Restraints on page 130). When
you touch this button, the touchscreen displays a popup with an image of the seat. If the lumbar area on the image is not
highlighted in blue, touch the lumbar area on the image to specify that you want to adjust lumbar support. The selection
you choose is retained until you manually change it.
2. Adjust backrest.
3. Move seat forward/backward.
4. Adjust the seat’s height and tilt angle.
WARNING: Before adjusting a front seat, check that the area around the seat is free of obstacles (people and objects).
WARNING: Do not adjust seats while driving. Doing so increases the risk of a collision.
Owner's Manual
121
Owners Manual
WARNING: Riding in a moving vehicle with the seat back reclined can result in serious injuries in a collision, as you could
slide under the lap belt or be propelled into the seat belt. Ensure your seat back is reclined no more than 30 degrees
when the vehicle is moving.
Adjusting the Front Seats
1. Move seat forward/backward and adjust the seat’s height and tilt angle up/down.
2. Adjust backrest.
3. Adjust lumbar support.
122
Owner's Manual
Owners Manual
CAUTION: Do not move a front seat's backrest fully forward when the seat is also in the fully forward position. Doing so
can cause the top of the seat to hit, and potentially damage, the sun visor.
WARNING: Before adjusting a front seat, check that the area around the seat is free of obstacles (people and objects).
WARNING: Do not adjust seats while driving. Doing so increases the risk of a collision.
WARNING: Riding in a moving vehicle with the seat back reclined can result in serious injuries in a collision, as you could
slide under the lap belt or be propelled into the seat belt. Ensure your seat back is reclined no more than 30 degrees
when the vehicle is moving.
Folding Rear Seats
CybertruckModel SModel X has a split rear seat that can fold forward.
NOTE: If Model S is equipped with the optional executive rear seats, these seats do not fold forward.
NOTE: Driving with the rear seats folded forward can increase the amount of perceived noise and/or vibration coming from the
rear of the vehicle (trunk, suspension, etc.).
CAUTION: Before folding seats all the way down, ensure the seat belt is unbuckled and there are no objects remaining
on the seat.
Before folding, remove items from the seats and the rear footwell. To allow the rear seat backs to fold completely flat, you may
need to move the front seats forward.
To fold a rear seat, pull the corresponding lever and fold the seat forward.
Owner's Manual
123
Owners Manual
Raising Rear Seats
Before raising a rear seat, make sure that the seat belts are not trapped behind the backrest.
Pull the seat back upward until it locks into place.
To confirm that the seat back is locked in the upright position, try pulling it forward.
WARNING: Always ensure the seat backs are locked in their upright position by pushing it forward or rearward. Failure to
do so increases the risk of injury.
Adjusting Second Row Monopost Seats
A Model X equipped with monopost seats can accommodate two or three passengers in the second row, depending on the
option chosen at time of purchase. There are two ways to adjust the position of these seats:
• Touch Controls > Seats on the touchscreen. Press and hold the icon associated with the seat you want to adjust. White
icons indicate that the seat can be moved in that direction; gray icons indicate that the seat cannot be moved any farther in
that direction.
NOTE: The front seats may move forward slightly to accommodate the forward movement of the second row seats.
• Use the manual adjustments illustrated below. In addition to moving a seat forward/rearward, the manual seat adjustments
allow you to adjust the backrest. Although the control on the outboard seats is L-shaped, and the control on the middle
seat is circular, they both provide the same functions.
124
Owner's Manual
Owners Manual
1. Move seat forward/backward (up/down on the control) and adjust the backrest (left/right on the control).
2. Move seat forward/backward.
3. Adjust backrest.
NOTE: The backrest locks into position when you release the lever. If a backrest is not locked into position when a driving gear
is engaged, the instrument panel displays an alert for the unlocked backrest. Adjust the backrest again, ensuring it locks into
position.
WARNING: Before driving, ensure the seat is locked in position. You may need to pull the seat forward or backward until
it clicks into place.
Adjusting Second Row Seat Backs (Bench Seats)
If your Model X is equipped with two seating rows, the second row bench seats can accommodate up to three passengers.
Use the mechanical adjustment lever located at the side of each outboard seating position to adjust the seat backs. A bench
seat is split 60/40 so the adjustment lever on the left side moves the seat backs for both the left and center seats, whereas the
lever on the right side moves the rightmost seat back only. While pulling and holding the lever, move the seat back to the
desired position, and then release the lever. When returning a seat back to its upright position, try moving it forward or back to
ensure it is securely latched into position.
Owner's Manual
125
Owners Manual
WARNING: Riding in a moving vehicle with the seat back reclined can result in serious injuries in a collision, as you could
slide under the lap belt or be propelled into the seat belt. Ensure the backs of occupied seats are reclined no more than
30 degrees when the vehicle is moving.
Folding Second Row Seat Backs (Bench Seats)
The second row seat backs on bench seats can be folded fully forward so they lay flat and maximize cargo space. Pull up the
mechanical lever located on the side of each outboard seat (the same lever you use to recline the seats, as described above),
then push the seat back fully forward. The bench seats have a 60/40 split—therefore, the adjustment lever on the left side
folds the seat backs for both the left and center seats, whereas the lever on the right folds the rightmost seat back only.
NOTE: Before folding seats fully forward, remove any items from the seats and the rear footwell. To allow the seat backs to fold
completely flat, you may need to move the front seats forward.
CAUTION: Before folding seats all the way down, ensure the seat belt is unbuckled and there are no objects remaining
on the seat.
Moving Second Row Bench Seats
NOTE: Only bench seats in seven-seat vehicles can be moved forward and rearward. The bench seats in five-seat vehicles are
stationary.
Use the mechanical lever located beneath each outboard seating position to move the second row seats forward or rearward.
The bench seats have a 60/40 split—therefore, the lever on the left side moves the seat for the left and center seats, whereas
the lever on the right side moves only the rightmost seat. Pull and hold the lever while moving the seat forward or rearward.
Release the lever when the seat is at the desired location.
126
Owner's Manual
Owners Manual
NOTE: You can adjust the position of bench seats using the mechanical levers only. You cannot use the touchscreen to adjust
bench seats.
Accessing Third Row Seats (if equipped) - Monopost Seating
A button is located on the backrest of each outboard monopost seat in the second row. This button makes it easy for
passengers to enter and exit the third row seating positions. Touch Controls > Seats > Easy Entry and choose how you want
this button to work:
• ON - Allows you to tilt and move the associated outboard seat fully forward, and the center seat partially forward, with a
single-press of the button.
• OFF - When off, which is recommended if a child seat is installed in the second row, you must hold the button to move the
second row seats forward.
After using the third row ingress button to access third row seats, simply press the button again to return the seats to their
normal position.
Owner's Manual
127
Owners Manual
WARNING: For vehicles with third row seats, do not use the third row ingress button located on the backrest of a second
row outboard seat when a child is seated in the second row. Using the button tilts and moves the seats forward and can
squeeze the occupant. Do not rely on Model X to recognize or accommodate occupants seated in the vehicle while
using this button. Use this button only when the second row seats are unoccupied.
Guidelines for using the third row ingress button:
• If a front row seat is positioned such that the second row seat will collide with it during an easy entry operation, it
automatically moves forward just enough to accommodate the forward position of the second row monopost seat.
• Forward movement of second row monopost seats cancels if an occupant adjusts a second row seat while it is moving.
• When an outboard seat tilts forward after pressing the button, its backrest resets to the forward position and may need to
be re-adjusted for comfort.
WARNING: Use the third row ingress button to access the third row ONLY when the second row seats are unoccupied.
Do not rely on Model X to recognize or accommodate occupants seated in the vehicle while using the button.
WARNING: Always ensure that the seat is locked in position before traveling. Failure to do so increases the risk of injury.
Accessing Third Row Seats (if equipped) - Bench Seating
A button is located on the backrest of each outboard bench seat in the second row. This button makes it easy for passengers
to enter and exit the third row seating positions. Press and release the button on the left outboard seat to tilt and move the
combined left and center seats forward. Press and release the button on the right outboard seat to tilt and move the right seat
forward.
128
Owner's Manual
Owners Manual
WARNING: For vehicles with third row seats, do not use the third row ingress button located on the backrest of a second
row outboard bench seat when a child is seated in the second row. Using the button allows the combined left and center
seats to be moved forward and can squeeze the occupant. Use this button only when the second row seats are
unoccupied. Before driving, ensure the seat and the seat back are securely latched into position.
In some situations, such as when you are parked on an incline or when the seat's trim affects the movement of the bench seats
after you press the button, the bench seats might not move forward completely, and you may need to push the seats forward
gently until they reach the end of the track.
WARNING: After you use the third row ingress button to access the third row seats, push the bench seats back to their
seating position, ensuring the seats are securely latched into position by trying to move them forward and rearward.
Failure to do so increases the risk of injury.
WARNING: The seat must be fully latched into position before driving. Push or pull the seat until you hear the seat "click"
into place.
Folding and Raising Third Row Seat Backs (if equipped)
To fold a third row seat, press the button located in the top outside corner of the seat. The button has two detents.
Owner's Manual
129
Owners Manual
1. Fold head restraint forward.
2. Fold seat back forward.
To raise the seats, hold the button on the top outside corner of the seat then pull the seat back upward until it latches into
place. Try pulling the seat back forward to confirm that it is locked in the upright position.
NOTE: Before folding third row seat backs, remove any items from the seats and the footwell. To allow the seat backs to fold
completely flat, you may need to move the second row seats forward.
NOTE: Driving with the third row seats backs folded forward might result in increased perceivable noise and/or vibration
coming from the rear of the vehicle (trunk, suspension, etc.).
CAUTION: Before folding seats all the way down, ensure the seat belt is unbuckled and there are no objects remaining
on the seat.
WARNING: Always ensure the seats and seat backs are locked in their upright position before travel. Failure to do so
increases the risk of injury.
Head Supports/Restraints
If your Model S is equipped with adjustable head supports, use the round button on the seat to move the head support up/
downUse the round button on the seat to move the head support up/down. The same button is used to adjust the seat's lumbar
support (see Adjusting the Driver’s Seat on page 121). Therefore, when you touch this button, the touchscreen displays a
popup with an image of the seat. If the head support shown on the image is not highlighted in blue, touch this area on the
image to specify that you want to adjust the head support. The selection you choose is saved until you manually change it. You
can save the head support setting to your driver profile (see Driver Profiles on page 297).
NOTE: Head supports are not adjustable on early versions of Model S.
130
Owner's Manual
Owners Manual
The second and third row seats have integrated non-removable head supports that cannot be adjusted. However, the head
supports in the third row seats can be folded down (see Folding and Raising Third Row Seat Backs (if equipped) on page 129).
Seat Heaters
The front seats operate at three levels from 3 (highest) to 1 (lowest). To operate the seat heaters, see Operating Climate
Controls on page 427.
If CybertruckModel SModel X is equipped with the cold weather package, you can also control seat heaters in all rear seating
positions, as well as wiper defrosters and washer nozzles by touching the climate controls on the touchscreen.
WARNING: To avoid burns resulting from prolonged use, individuals who have peripheral neuropathy, or whose capacity
to feel pain is limited because of diabetes, age, neurological injury, or some other condition, should exercise caution
when using the climate control system and seat heaters.
Seat Covers
WARNING: Do not use seat covers on a front seata seat equipped with a seat-mounted airbag (see Location of Airbags
on page 187). Doing so could restrict deployment of the seat-mounted side airbags if a collision occurs. Also, if the
vehicle is equipped with an occupant detection system that is used to determine the status of the passenger front
airbag, seat covers may interfere with this system.
Owner's Manual
131
Owners Manual
Front and Rear Seats
Correct Driving Position
The seat, head support, seat belt and airbags work together to maximize your safety. Using these correctly ensures greater
protection.
Position the seat so you can wear the seat belt correctly, while being as far away from the front airbag as possible:
1. Sit upright with both feet on the floor and the seat back in an upright position.
2. Make sure you can easily reach the pedals and that your arms are slightly bent when holding the steering wheelsteering
yoke (or steering wheel). Your chest should be at least 10 inches (25 cm) from the center of the airbag cover.
3. Place the shoulder section of the seat belt mid-way between your neck and your shoulder. Fit the lap section of the belt
tightly across your hips, not across your stomach.
CybertruckModel SModel X front seats include integrated head supports that cannot be adjusted or removed.
132
Owner's Manual
Owners Manual
Adjusting the Front Seats
1. Move seat forward/backward and adjust the seat’s height and tilt angle up/down.
2. Adjust backrest.
3. Adjust lumbar support.
WARNING: Before adjusting a front seat, check that the area around the seat is free of obstacles (people and objects).
WARNING: Do not adjust seats while driving. Doing so increases the risk of a collision.
WARNING: Riding in a moving vehicle with the seat back reclined can result in serious injuries in a collision, as you could
slide under the lap belt or be propelled into the seat belt. Ensure your seat back is reclined no more than 30 degrees
when the vehicle is moving.
Calibrating Seats
(If equipped) You can calibrate the driver seat. This is useful if you find your seat range limited or your driver profile does not
automatically adjust the seat for you. Navigate to Controls > Service > Driver Seat, Steering & Mirrors Calibration and follow the
instructions on the touchscreen.
WARNING: Ensure nothing is behind or underneath the driver seat during calibration. Failure to do so may cause serious
injury.
Owner's Manual
133
Owners Manual
Folding Rear Seats
CybertruckModel SModel X has a split rear seat that can fold forward.
NOTE: If Model S is equipped with the optional executive rear seats, these seats do not fold forward.
Before folding, remove items from the seats and the rear footwell. To allow the rear seats to fold completely flat, you may need
to move the front seats forward. To fold a rear seat, push the corresponding button on the back of the seat.
You can also fold the rear seats fully forward by pressing the corresponding switch located on the left side of the rear trunk.
Pressing the switch causes the seat to unlatch. You can then push it downward to lay it fully flat.
To return the seats to their upright position, pull upwards until it locks into place. To confirm that the seat is locked in the
upright position, try pulling it forward.
NOTE: Driving with the rear seats folded may increase noise in the cabin area (for example, you may hear vibration sounds
coming from the rear of the vehicle such as the trunk, suspension, etc.).
CAUTION: Before folding seats all the way down, ensure the seat belt is unbuckled and there are no objects remaining
on the seat.
CAUTION: While raising a rear seat back, hold the seat belt out of the way to ensure that the seat belt is not trapped
behind the backrest or caught in the seat latch.
WARNING: Always ensure that the seats are locked in their upright position by attempting to push it forward or
rearward, ensuring the latch is fully engaged. Failure to do so can increase the risk of injury.
134
Owner's Manual
Owners Manual
Head Supports
The front seats include integrated head supports that you cannot adjust.
The rear outboard seating positions include an adjustable head support that can be raised/lowered or removed. The head
support should always be raised and locked into position (so that the center is aligned with the center of the occupant's head)
when occupied by a passenger that is not in a child safety seat.
Lift the head support to the desired position. To lower the head support, press and hold the button on the base of the outer
post while pushing down on the head support.
To remove a head support:
1. Lift the headrest to raise it.
2. Press and hold the button located at the base of the right post.
3. Insert a short, flat object (such as a small flat-head screwdriver) into the opening on the inside base of the opposite post
and pull the head support upward.
Owner's Manual
135
Owners Manual
Seat Heaters
All seats contain heating pads. In addition, both front seats are ventilated. You can control seat heaters in all seating positions
using the touchscreen.
WARNING: To avoid burns resulting from prolonged use, individuals who have peripheral neuropathy, or whose capacity
to feel pain is limited because of diabetes, age, neurological injury, or some other condition, should exercise caution
when using the climate control system and seat heaters.
Seat Covers
WARNING: Do not use seat covers on front seats. Doing so could restrict deployment of the seat-mounted side air bags
if a collision occurs. Seat covers can also interfere with the occupant detection system that is used to determine the
status of the passenger front airbag.
Front and Rear Seats
Correct Driving Position
The seat, head support, seat belt and airbags work together to maximize your safety. Using these correctly ensures greater
protection.
Position the seat so you can wear the seat belt correctly, while being as far away from the front airbag as possible:
1. Sit upright with both feet on the floor and the seat back in an upright position.
2. Make sure you can easily reach the pedals and that your arms are slightly bent when holding the steering wheelsteering
yoke (or steering wheel). Your chest should be at least 10 inches (25 cm) from the center of the airbag cover.
3. Place the shoulder section of the seat belt mid-way between your neck and your shoulder. Fit the lap section of the belt
tightly across your hips, not across your stomach.
CybertruckModel SModel X seats include integrated head supports that cannot be adjusted or removed.
136
Owner's Manual
Owners Manual
Adjusting Front Seats
1. Move seat forward/backward and adjust the seat’s height and tilt angle up/down.
2. Adjust backrest.
3. Adjust lumbar support.
WARNING: Before adjusting a front seat, check that the area around the seat is free of obstacles (people and objects).
WARNING: Do not adjust seats while driving. Doing so increases the risk of a collision.
Owner's Manual
137
Owners Manual
WARNING: Riding in a moving vehicle with the seat back reclined can result in serious injuries in a collision, as you could
slide under the lap belt or be propelled into the seat belt. Ensure your seat back is reclined no more than 30 degrees
when the vehicle is moving.
Calibrating Seats
(If equipped) You can calibrate the driver seat. This is useful if you find your seat range limited or your driver profile does not
automatically adjust the seat for you. Navigate to Controls > Service > Driver Seat, Steering & Mirrors Calibration and follow the
instructions on the touchscreen.
WARNING: Ensure nothing is behind or underneath the driver seat during calibration. Failure to do so may cause serious
injury.
Adjusting Second Row Seats (Bench)
Second row bench seats can accommodate up to three passengers. Use the mechanical adjustment lever located at the side
of each outboard seating position to adjust the seat backs. A bench seat is split 60/40 so the adjustment lever on the left side
moves the seat backs for both the left and center seats, whereas the lever on the right side moves the rightmost seat back
only. While pulling and holding the lever, move the seat back to the desired position, and then release the lever. When
returning a seat back to its upright position, try moving it forward or back to ensure it is securely latched into position.
WARNING: Riding in a moving vehicle with the seat back reclined can result in serious injuries in a collision, as you could
slide under the lap belt or be propelled into the seat belt. Ensure the backs of occupied seats are reclined no more than
30 degrees when the vehicle is moving.
Folding Second Row Seats (Bench)
The second row seat backs on bench seats can be folded fully forward so they lay flat and maximize cargo space. Pull up the
mechanical lever located on the side of each outboard seat (the same lever you use to recline the seats, as described
previously), then push the seat back fully forward. The bench seats have a 60/40 split—therefore, the adjustment lever on the
left side folds the seat backs for both the left and center seats, whereas the lever on the right folds the rightmost seat back
only.
138
Owner's Manual
Owners Manual
NOTE: Before folding seats fully forward, remove any items from the seats and the rear footwell. To allow the seat backs to fold
completely flat, you may need to move the front seats forward.
CAUTION: Before folding seats all the way down, ensure the seat belt is unbuckled and there are no objects remaining
on the seat.
Moving Second Row Seats (Bench)
NOTE: Only bench seats in seven-seat vehicles can be moved forward and rearward. The bench seats in five-seat vehicles are
stationary.
Use the mechanical lever located beneath each outboard seating position to move the second row seats forward or rearward.
The bench seats have a 60/40 split—therefore, the lever on the left side moves the seat for the left and center seats, whereas
the lever on the right side moves only the rightmost seat. Pull and hold the lever while moving the seat forward or rearward.
Release the lever when the seat is at the desired location. Ensure the lever is locked in place before driving.
NOTE: You can adjust the position of bench seats using the mechanical levers only. You cannot use the touchscreen to adjust
bench seats.
Adjusting Second Row Seats (Monopost)
A Model X equipped with monopost seats can accommodate two passengers in the second row. To adjust the position of
these seats, use the manual adjustments.
Owner's Manual
139
Owners Manual
Use the button near the top of the seat to move the seat back forward/backward.
Use the L-shaped button at the bottom of the seat to move the seat forward/backward (up/down on the control) and adjust the
backrest by tilting the top of the L-shaped button forward/backward.
NOTE: The backrest locks into position when you release the lever. If a backrest is not locked into position when a drive mode
is engaged, the instrument panel displays an alert for the unlocked backrest. Adjust the backrest again, ensuring it locks into
position.
WARNING: Before driving, ensure the seat is locked in position. You may need to pull the seat forward or backward until
it clicks into place.
Accessing Third Row Seats (if equipped)
Bench Seats
If your vehicle is equipped with bench seats, a button is located on the backrest of each second row outboard bench seat. This
third row ingress button makes it easy for passengers to enter and exit the third row seating positions. Press and release the
button on the left outboard seat to tilt and move the combined left and center seats forward. Press and release the button on
the right outboard seat to tilt and move the right seat forward.
WARNING: For vehicles with third row seats, do not use the third row ingress button located on the backrest of a second
row outboard bench seat when a child is seated in the second row. Using the button allows the combined left and center
seats to be moved forward and can squeeze the occupant. Use this button only when the second row seats are
unoccupied. Before driving, ensure the seat and the seat back are securely latched into position.
140
Owner's Manual
Owners Manual
In some situations, such as when you are parked on an incline or when the seat's trim affects the movement of the bench seats
after you press the button, the bench seats might not move forward completely, and you may need to push the seats forward
gently until they reach the end of the track.
WARNING: After you use the third row ingress button to access the third row seats, push the bench seats back to their
seating position, ensuring the seats are securely latched into position by trying to move them forward and rearward. The
seat must be fully latched into position before driving. Push or pull the seat until you hear the seat "click" into place.
Failure to do so increases the risk of injury.
Monopost Seats
If your vehicle is equipped with monopost seats, a third row ingress button is located on the backrest of each outboard
monopost seat in the second row. This button makes it easy for passengers to enter and exit the third row seating positions.
Touch Controls > Safety > Third Row Easy Entry and choose how you want this button to work:
• ON - Allows you to tilt and move the associated outboard seat fully forward, and the center seat partially forward, with a
single-press of the button.
• OFF - When off, which is recommended if a child seat is installed in the second row, you must hold the button to move the
second row seats.
After using the button to access third row seats, simply press the button again to return the second row seats to their normal
position.
WARNING: Do not use the third row ingress button located on the backrest of a second row outboard seat when a child
or occupant is seated in the second row. Use this button ONLY when second row seats are unoccupied. Using the
button tilts and moves the seats forward and can squeeze an occupant. Do not rely on Model X to recognize or
accommodate seated occupants while using this button.
Guidelines for using the third row ingress button:
• If a front seat is positioned such that the second row seat will collide with it during an easy entry operation, it automatically
moves forward enough to accommodate the forward position of the second row monopost seat.
• When an outboard seat tilts forward after pressing the button, its backrest resets to the forward position and may need to
be re-adjusted for comfort.
• Forward movement of the second row monopost seats cancels if an occupant adjusts a second row seat while it is moving.
WARNING: Always ensure that the seat is locked in position before traveling. Failure to do so increases the risk of injury.
Owner's Manual
141
Owners Manual
Folding Third Row Seats (if equipped)
To fold a third row seat, press the button located in the top outside corner of the seat. The button has two detents.
1. Fold head restraint forward.
2. Fold seat back forward.
NOTE: Before folding third row seat backs, remove any items from the seats and the footwell. To allow the seat backs to fold
completely flat, you may need to move the second row seats forward.
NOTE: Driving with the third row seat backs folded forward may result in increased perceivable noise and/or vibration coming
from the rear of the vehicle (trunk, suspension, etc.).
NOTE: To raise the seats, hold the button on the top outside corner of the seat, then pull the seat back upward until it latches
into the upright position. Try pulling the seat back forward to confirm that it is locked in position.
CAUTION: Before folding seats all the way down, ensure the seat belt is unbuckled and there are no objects remaining
on the seat.
WARNING: Always ensure the seats and seat backs are locked in their upright position before travel. Failure to do so
increases the risk of injury.
Seat Heaters
All seats contain heating pads. In addition, both front seats are ventilated. You can control seat heaters in all seating positions
using the climate controls on the touchscreen.
WARNING: To avoid burns resulting from prolonged use, individuals who have peripheral neuropathy, or whose capacity
to feel pain is limited because of diabetes, age, neurological injury, or some other condition, should exercise caution
when using the climate control system and seat heaters.
Seat Covers
WARNING: Do not use seat covers on a seat equipped with a seat-mounted air bag (see Location of Airbags on page
187). Doing so could restrict deployment of the seat-mounted side air bags if a collision occurs. Also, if the vehicle is
equipped with an occupant detection system that is used to determine the status of the passenger front airbag, seat
covers may interfere with this system.
142
Owner's Manual
Owners Manual
Seat Belts
Wearing Seat Belts
Using seat belts and child safety seats is the most effective way to protect occupants if a collision occurs. Therefore, wearing
a seat belt is required by law in most jurisdictions.
All seats are equipped with three-point inertia reel seat belts. Inertia reel belts are automatically tensioned to allow occupants
to move comfortably during normal driving conditions. To securely hold child safety seats, all passenger seating positions are
equipped with an automatic locking retractor (ALR) feature that, by fully extracting the seat belt (beyond the length needed
for a typical adult occupant), locks the belt into place until the seat belt is unbuckled (see Installing Seat Belt Retained Child
Seats on page 174Installing Seat Belt Retained Child Seats on page 166Installing Seat Belt Retained Child Seats on page 150).
The seat belt reel automatically tightens or locks to prevent movement of occupants if CybertruckModel SModel X
experiences a force associated with hard acceleration, braking, cornering, or an impact in a collision.
Seat Belt Reminders
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: 2024.32_0824.pdf
Replacement Service Bulletin Number:
MFR Communication Date: 2024-08-31
MFR Internal Campaign ID/Software Version: 07/16/1905
Communication Type: Over The Air
NHTSA Components: UNKNOWN OR OTHER
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
- Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
- 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
- Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission, ABS, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
- Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCA
Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU c0ding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations - 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCA AutoAuth: Now supports FCA SGW module for Chrysler, for Jeep, for Dodge (2018+), for Fiat (2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Pr0gramming): Allows for Ford, for Lincoln, and for Mazda ECU pr0gramming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order
- 39+ Services/Resets/Adaptations/Relearns/Calibrations: XTOOL D7S full system car scanner diagnostic tool tackles 99% of common car issues through its 36+ special functions, including Oil Reset, EPB, SAS, BMS, Throttle Reset, Injector C0ding, ABS Bleed, TPMS Reset, Power Balance, etc and also covers specific-vehicle functions like Crank Sensor Relearn, ABS Initialization, Cylinder Power Balance, Fuel Trim Reset, Idle Relearn etc. This car diagnostic scanner enhances efficiency, making repairs and maintenance hassle-free. Tip: DO NOT for All vehicles, please check compatibility first
- Cost-effective ECU C0ding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMW, for Benz and offline for BENZ, for MIT, along with PMI functions for Ford, for Mazda, and for Lincoln. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase
- OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
- 【✅Compared to BOSSCOMM IF742, IF745 Offers Full-System Diagnostics】The BOSSCOMM IF745 car diagnostic scanner is an upgraded model of IF742. In addition to supporting all OBD2 Code Reader functions and 6 reset options (ABS/EPB/SAS/BMS/Oil/Throttle), it expands diagnostics from 4 systems (Check Engine/ABS/SRS/Transmission) to vehicle All systems, including Steering, Suspension, and Body Electronics. This provides deeper, more comprehensive diagnostic capabilities.
- 【✨10 OBD2 Functions】The BOSSCOMM IF745 scan tool’s DTC Lookup instantly translates fault codes into user-friendly explanations, its I/M Readiness feature streamlines emissions testing with a single tap, and Freeze Frame lets you pinpoint the exact moment of a fault for in-depth root-cause diagnosis. Combined with a live data dashboard and advanced diagnostics (O2S, OBMon, EVAP), it delivers comprehensive insights for confident troubleshooting.
- 【✨Deep Diagnostics for All Vehicle System Modules】Beyond code reading/clearing and ECU information retrieval, our all-in-one data stream feature lets you inspect all current fault codes and their locations across the vehicle’s systems. This vehicle code reader helps you turn off dashboard warning lights and perform a comprehensive self-check of your car at home—no more back-and-forth trips to the repair shop or hefty inspection fees.
- 【✨6 Essential Resets: ABS Bleeding, Oil, EPB, SAS, Throttle, BMS】The BOSSCOMM IF745 obd2 scanner diagnostic tool swiftly purges air from brake lines to restore braking sensitivity, fine-tunes maintenance cycles to eliminate false alerts, resolves parking brake issues with one-click control, recalibrates steering sensors for stability, optimizes engine idling/acceleration for smoother performance, and deeply resets battery systems to extend lifespan and range via precise parameter adjustments.❗NOTE: Does NOT support bidirectional control, coding, or programming.
- 【✨10,000+ Car Models, AutoVIN, 13 Languages】The BOSSCOMM IF745 vehicle scanner diagnostic tool covers 73+ global car brands and offers support in 13 languages, making it perfect for DIYers, auto mechanics, or as a thoughtful gift. With a single-click AutoVIN feature, it instantly retrieves vehicle serial numbers, streamlining diagnostics for users globally. This adaptable tool balances user-friendliness with precision, catering to both personal and professional requirements.✅Unsure about compatibility? Compatibility will vary on vehicles' model and year, pls reach us via 📧 [email protected] 📧 before purchase.
This product presentation was made with AAWP plugin.