Loading...

NHTSA ID Number: 11006914

Manufacturer Communication Number: 2024.32_0824.pdf

TSB/Document Date: 2024-09-04


Summary

Tesla does not provide physical owner's manual copies. Instead, all available owner’s manual content is integrated into the vehicle software, and only the content relevant for a given vehicle, based on vehicle configuration and software version installed, is displayed on its touchscreen. This file contains all available owner’s manual content for the vehicle converted to PDF format, and given the distribution method and NHTSA’s submission format requirements, it is the best available representative copy of owner’s manual content. However, a customer who accesses the owner’s manual via their vehicle’s touchscreen would only see the parts of this PDF file that are relevant to their vehicle.


To release, press the button on the buckle, release the chest clip, and separate the two halves of the seat restraint.
Warnings - Tesla Child SeatseBay logo
WARNING: The Tesla built-in rear facing seats are child restraint systems and must only be used for children over 37"
(94 cm) tall and weighing between 35 and 77 lbs (16.2 to 35.2 kg).
WARNING: Do not use supplemental child restraint systems, including booster seats, in the Tesla built-in rear facing
child seats.
WARNING: Always ensure that the top of the child’s head cannot touch the vehicle and that the child is seated
comfortably with the seat belts correctly fastened.
WARNING: Follow all instructions and heed all warnings related to the Tesla built-in rear facing child seatseBay logo. Failure to do
so can compromise occupant safety.
WARNING: Read all safety warnings and labels attached to the seats.
WARNING: Do not leave children unattended in CybertruckModel SModel X, even if the child is secured in a child safety
seat or a TeslaeBay logo built-in rear facing child seateBay logo. In hot weather, the interior temperature can reach dangerous levels that
can result in dehydration, serious injury or death.
WARNING: Do not remove or replace the fabric on a Tesla built-in rear facing child seateBay logo. The covers are an integral part
of the restraint’s performance and should not be removed or replaced with any other type than those supplied by Tesla.
WARNING: If the Tesla built-in rear facing child seatseBay logo have been worn in an accident, they must be inspected or replaced
by Tesla, even if damage is not obvious.
WARNING: Before allowing a child to ride in the Tesla built-in rear facing child seatseBay logo, check that the seat is securely held
in the upright position by trying to pull the seat back toward you.
WARNING: Do not remove the built-in rear facing child seatseBay logo for any reason, including cleaning. To ensure safety of
occupants, removal and installation must be performed by qualified TeslaeBay logo service technicians.
WARNING: Do not make modifications or additions that can interfere with the operation of the TeslaeBay logo built-in rear facing
child seats.
WARNING: To prevent injury, ensure all loose items (bags, luggage, etc.) are secured. In an accident, or during hard
braking and sharp turns, loose items could cause injury.

186

Owner's Manual

Owners Manual
Airbags
Location of Airbags
Airbags are located in the approximate areas shown below. Airbag warning information is printed on the sun visors.
CybertruckModel SModel X is equipped with an airbag and lap/shoulder belt (also called seat belt assembly) at both
designated front seating positions. The airbag is a supplemental restraint at those seating positions. All occupants, including
the driver, should always wear their seat belts whether or not an airbag is also provided at their seating position to minimize the
risk of severe injury or death in the event of a crash.

Owner's Manual

187

Owners Manual

1. Knee airbags
2. Front airbags
3. Curtain airbags
4. Seat-mounted side airbags
NOTE: Vehicles manufactured prior to approximately mid-September 2022 are not equipped with a seat-mounted airbag
on the inside portion of the driver's seat.
5. Door-mounted airbags

How Airbags Work
Airbags inflate when sensors detect an impact that exceeds deployment thresholds. These thresholds are designed to predict
the severity of a crash in time for the airbags to help protect the vehicle's occupants. Airbags inflate instantly with
considerable force accompanied by a loud noise. The inflated bag, together with the seat belts, limits movement of occupants
to reduce the risk of injury.
Front airbags are not ordinarily designed to inflate in rear collisions, rollovers, side collisions and when braking heavily or
driving over bumps and potholes. Likewise, front airbags may not inflate in all frontal collisions, such as minor front collisions,
underride collisions, or minor impacts with narrow objects (such as posts or poles). Significant superficial damage can occur
to the vehicle without the airbags inflating and, conversely, a relatively small amount of structural damage can cause airbags to
inflate. Therefore, the external appearance of the vehicle after a collision does not represent whether or not the front airbags
should have inflated.

188

Owner's Manual

Owners Manual
WARNING: Before modifying CybertruckModel SModel X to accommodate a person with disabilities in a way that may
affect the airbag system, use the mobile app to schedule service.
Types of Airbags
CybertruckModel SModel X has the following types of airbags:
• Front airbags: The front airbags are designed to reduce injuries if larger children or adults are riding in the front seats.
Follow all warnings and instructions related to seating a child on the front passenger seat (if permitted in your market
region).
• Knee airbags: Knee airbags and the front airbags work together. The knee airbags limit the forward motion of the front seat
occupants by restricting leg movement, thereby positioning the occupants so that the front airbags work more effectively.
Whether or not knee airbags deploy in a collision is partially dependent on the track position of the associated seat.
• Seat-mounted airbags: A seat-mounted side airbag in the front seats helps protect the pelvis and the thorax region of the
torso. The seat-mounted airbag on the inside portion of the driver's seat helps protect the head and torso. Seat-mounted
airbags on both the impacted and non-impacted side of the vehicle inflate in the event of a severe side impact or a severe
offset frontal impact.
• Curtain airbags: A curtain airbag on each side of CybertruckModel SModel X in the front roof-rail help protect the head.
Curtain airbags on both the impacted and non-impacted side of the vehicle will inflate if a severe side impact occurs, a
severe offset frontal impact occurs, or if the vehicle rolls over.
• Door-mounted airbags: There is an airbag on each side of CybertruckModel SModel X mounted in the trim on the falcon
wing doors. These are the same as the curtain airbags in that they help protect the head and typically inflate in the event of
a severe side impact, a severe offset frontal impact, or if the vehicle rolls over. The door-mounted airbags on both the
impacted and non-impacted side of the vehicle will inflate.
Airbag Status Indicator
The status of the passenger front airbag displays on the touchscreen:
The Passenger Airbag Off indicator displays on the touchscreen when the passenger front airbag is OFF.
When the passenger front airbag is OFF, it does not inflate when a collision occurs. This indicator also
displays when the seat is unoccupied. When driving with a child seateBay logo on the front passenger seat (if
permitted in your market region), always double-check the status of the passenger front airbag to confirm
that it is OFF.
NOTE: In cars manufactured prior to approximately October 2019, the Passenger Airbag Off indicator does
not display when the seat is unoccupied.
To protect an adult occupying the front passenger seat, ensure the passenger front airbag is ON. When the
passenger airbag is ON, it may inflate when a collision occurs.
The airbag indicator displays on the touchscreen for a few seconds at the start of every drive while checking
the following functionality, as applicable:
• Airbags
• Seat belts with pre-tensioners and load limiters
• Impact sensors
• Occupant sensors
Seat belt sensors
• Passive safety component wiring harnesses
• Onboard restraint controlled components (ex: accelerometer and other passive safety components)
After this check, the airbag indicator turns off. If the airbag system detects a fault in any of the previously
mentioned components, the airbag warning indicator stays on. In this case contact TeslaeBay logo service immediately.
Do not drive the vehicle until the airbag system is inspected by Tesla.

Owner's Manual

189

Owners Manual
The airbag indicator on the instrument cluster remains lit if the airbag system is malfunctioning. The only time
this indicator should illuminate is briefly when CybertruckModel SModel X first powers up, in which case it
turns off within a few seconds. If it remains illuminated, use the mobile app to schedule a service
appointment immediately and do not drive.

Front Passenger Occupant Detection
CybertruckModel SModel X has an occupancy sensor in the front passenger seat that controls the status of the passenger
front airbag.
NOTE: The occupancy sensor system meets the regulatory requirement of FMVSS 208 and automatically detects when
inflating the passenger front airbag would be unnecessary or potentially harmful.
Weight in front passenger seat

Passenger airbag status

Indicator status

Empty

OFF

PASSENGER AIRBAG OFF**

Up to 20 lbs (9 kg)

OFF

PASSENGER AIRBAG OFF

20-100 lbs (9-45 kg)*

OFF or ON

Over 100 lbs (45 kg)

ON

OFF - PASSENGER AIRBAG OFF
ON - PASSENGER AIRBAG ON
PASSENGER AIRBAG ON

*Values are approximate. A weight detected near the threshold can cause the airbag status to occasionally turn on and off
depending on seating position and physique.
**In cars manufactured after approximately October 2019, the Passenger Airbag Off indicator displays when the seat is
unoccupied.
NOTE: It takes approximately six seconds after you power on CybertruckModel SModel X for the occupancy sensor to report
accurate status of the front passenger airbag. As a result, when you first power on CybertruckModel SModel X, even in
situations when it should be OFF because the seat is occupied by a weight of 20 lbs (9 kg) or less, it will take the touchscreen
approximately six seconds to display the status, PASS AIRBAG OFF. If it fails to do so, use the mobile app to schedule a
service appointment immediately and do not seat a child in the front passenger seating position.
To make sure the sensing system can correctly detect occupancy status, eliminate the following:
• Objects lodged under the seat.
• Heavy objects sitting on the seat (briefcase, large purse).
• Objects wedged between the seat back and seat cushion.
• Cargo interfering with the seat.
• Aftermarket items attached to, or sitting on or between, the seat and occupant including but not limited to covers, mats,
blankets, etc.
These conditions can interfere with the occupancy sensor. If you have eliminated the above possibilities, and the airbag status
is still incorrect, ask passengers to ride in the rear seats and use the mobile app to schedule a service appointment to have the
airbag system checked.
NOTE: The front passenger occupancy sensor affects the operation of the passenger front airbags only. The side airbags are
not affected.
WARNING: If the front passenger airbag is not turning on or off as expected based on the weight thresholds previously
described, use the mobile app to schedule a service appointment immediately.
WARNING: If seating a child in the front passenger seat is legally permissible in your market region, it is the driver's
responsibility to ensure that the passenger front airbag is OFF. Never seat a child in a rear facing safety seat in the front
passenger seat with an active airbag. DEATH or SERIOUS INJURY to the child can occur. Per recommendations by the
National Highway Traffic Safety Administration, all occupants age 12 and under must ride in the rear seats.

190

Owner's Manual

Owners Manual
WARNING: Do not use seat covers on CybertruckModel SModel X. Doing so could restrict deployment of the seatmounted side airbags if a collision occurs. It can also reduce the accuracy of the occupant detection system, if
equipped.
Front Passenger Occupant Detection
CybertruckModel SModel X has an occupancy classification system (OCS) that controls the status of the passenger front
airbag.
NOTE: The occupancy classification system (OCS) automatically detects when inflating the passenger front airbag would be
unnecessary or potentially harmful.
WARNING: Seating an infant in a rear-facing child restraint system on a seat equipped with an operational airbag can
cause serious injury or death.
Object Classification

OCS Passenger Airbag
Status*

Indicator status

Notes

Empty

OFF

PASSENGER AIRBAG OFF

Object

OFF or ON

PASSENGER AIRBAG OFF or
PASSENGER AIRBAG ON

Depends on material/contents

Rear facing child restraint system
designed for children up to a year
old

OFF

PASSENGER AIRBAG OFF

20 lbs (9 kg) or less

Forward facing child restraint
system

OFF

PASSENGER AIRBAG OFF

35 lbs (16 kg) or less

Child in a booster seat

OFF or ON

PASSENGER AIRBAG OFF or
PASSENGER AIRBAG ON

20-100 lbs (9-45 kg)*

Large child

OFF or ON

PASSENGER AIRBAG OFF or
PASSENGER AIRBAG ON

5th percentile female or larger (by
weight)

ON

PASSENGER AIRBAG ON

Over approximately 100 lbs (45
kg)

*If the passenger airbag status indicator does not match the situation, do not use the seat. The passenger must ride in a different seat. Use
the mobile app to schedule a service appointment.

NOTE: It takes approximately six seconds after you power on CybertruckModel SModel X for the occupant classification
system (OCS) to report accurate status of the front passenger airbag. As a result, when you first power on
CybertruckModel SModel X, even in situations when it should be OFF because the seat is occupied by a weight of 20 lbs (9
kg) or less, it will take the touchscreen approximately six seconds to display the status, PASS AIRBAG OFF. If it fails to do so,
use the mobile app to schedule a service appointment and do not seat a child in the front passenger seating position.
To make sure the sensing system can correctly detect occupancy status, eliminate the following:
• Objects lodged under the seat.
• Heavy objects sitting on the seat (briefcase, large purse).
• Objects wedged between the seat back and seat cushion.
• Cargo interfering with the seat.
• Aftermarket items attached to, or sitting on or between, the seat and occupant including but not limited to covers, mats,
blankets, etc.
These conditions can interfere with the occupancy sensor. If you have eliminated the above possibilities, and the airbag status
is still incorrect, ask passengers to ride in the rear seats and use the mobile app to schedule a service appointment to have the
airbag system checked.
NOTE: The front passenger occupancy sensor affects the operation of the passenger front airbags only. The side airbags are
not affected.
WARNING: If the front passenger airbag is not turning on or off as expected based on the weight thresholds previously
described, use the mobile app to schedule a service appointment immediately.

Owner's Manual

191

Owners Manual
WARNING: Never seat a child in the front passenger seat. DEATH or SERIOUS INJURY to the child can occur. Per
recommendations by the National Highway Traffic Safety Administration, all occupants age 12 and under must ride in the
rear seats.
WARNING: To ensure accuracy of the occupant detection system, do not make any modifications to the front passenger
seat.
WARNING: Do not use seat covers on CybertruckModel SModel X. Doing so could restrict deployment of the seatmounted side airbags if a collision occurs. It can also reduce the accuracy of the occupant detection system and the
noise-canceling microphones, if equipped.
Ensuring Accurate Occupant Detection
To help ensure an occupant in the front passenger seat can be accurately classified, the passenger must:
• Wear a seat belt.
• Sit upright on the center of the seat cushion, with shoulders resting against the seat back and legs extended comfortably in
front with feet on the floor. See Examples of Correct and Incorrect Seating Positions on page 194.See Examples of Correct
and Incorrect Seating Positions on page 192..
• Remain positioned on the seat cushion and not lift their weight off the seat (for example, by pushing their feet against the
floor or pressing on the center console or armrest to lift up).
• Never wear thick, wet, or bulky clothing (such as ski wear or padded clothing).
In addition to the items listed above, the following situations can interfere with the accuracy of the occupant classification
system:
• Placing a radio transmitter (for example, a hunting radio or walkie-talkie) on the front passenger seat.
• Placing an AC/DC inverter, or a device that is being powered by the inverter (for example, a cell phone, tablet, or computer)
on the front passenger seat cushion.
• Placing liquid (such as a bottled drink) or food containers on a car seateBay logo when a child restraint system is present.
• Incorrectly placing a child restraint system so that the entire lower section is not positioned against the seat cushion.
• Objects lodged under the seat or wedged between the seat back and cushion.
• Heavy objects sitting on the seat (briefcase, large purse).
• Cargo interfering with the seat.
• Aftermarket items attached to or placed between the seat and the occupant, such as covers, mats, blankets, etc.
These conditions can interfere with the occupancy sensor. If you have eliminated the above possibilities, and the airbag status
is still incorrect, instruct passengers to ride in the rear seats and use the mobile app to schedule a service appointment to have
the airbag system checked.
NOTE: Tesla follows NHTSA (National Highway Traffic Safety Administration) recommendations that all occupants age 12 and
under must ride in the rear seating positions.
NOTE: The front passenger occupancy sensor affects the operation of the passenger front airbags only. The side airbags are
not affected.
WARNING: Failure to follow the above instructions can adversely affect the Occupant Classification System (OCS)
which can cause serious injury or death.
WARNING: If the front passenger airbag is not turning on or off as expected, do not seat a passenger in the front
passenger seat. Use the mobile app to schedule a service appointment.
WARNING: To ensure accuracy of the occupant detection system, do not make any modifications to the front passenger
seat.
WARNING: Do not use seat covers on CybertruckModel SModel X. Doing so could restrict deployment of the seatmounted side airbags if a collision occurs. It can also reduce the accuracy of the occupant classification system.
Examples of Correct and Incorrect Seating Positions
Correct seating position:

192

Owner's Manual

Owners Manual

Incorrect seating position - the passenger's feet must be on the floor:

Incorrect seating position - the passenger must not slide forward on the seat cushion:

Owner's Manual

193

Owners Manual

Incorrect seating position - the passenger must not recline the backrest to a laying down position when the vehicle is moving:

Examples of Correct and Incorrect Seating Positions
Correct seating position:

194

Owner's Manual

Owners Manual

Incorrect seating position - the passenger's feet must be on the floor:

Incorrect seating position - the passenger must not slide forward on the seat cushion:

Owner's Manual

195

Owners Manual

Incorrect seating position - the passenger must not recline the backrest to a laying down position when the vehicle is moving:

196

Owner's Manual

Owners Manual
Inflation Effects
WARNING: When airbags inflate, a fine powder is released. This powder can irritate the skin and should be thoroughly
flushed from the eyes and from any cuts or abrasions.
After inflation, the airbags deflate to provide a gradual cushioning effect for the occupants and to ensure the driver’s forward
vision is not obscured.
If airbags have inflated, or if your vehicle has been in a collision, always have the airbags, seat belt pre-tensioners and any
associated components checked and, if necessary, replaced by TeslaeBay logo.
In a collision, in addition to the airbags inflating:
• United States only: Your vehicle automatically dials 911 if Controls > Safety > Automatic 911 calls is enabled. Cancellation
instructions as well as a countdown timer display on the touchscreen.
• Doors and liftgate unlock.
Hazard warning lights turn on.
• Interior lights turn on.
• High voltage is disabled (you must use the mobile app to schedule a service appointment to restore high voltage power).
Windows go to the vent position.
• Vehicle applies the brakes to come to a stop.
NOTE: Depending on the nature of the impact and the forces involved, doors may not unlock in a collision and/or damage may
prevent them from opening. In such cases, the door may need to be opened using the interior manual release, or other means
of extrication (for example, exiting through another door, breaking the window, etc.).
Airbag Warnings
WARNING: All occupants, including the driver, should always wear their seat belts, whether or not an airbag is also
provided at their seating position, to minimize the risk of severe injury or death in the event of a collision.
WARNING: Front seat occupants should not place their arms over the airbag module, as an inflating airbag can cause
fractures or other injuries.
WARNING: Do not use seat covers on CybertruckModel SModel X. Doing so could restrict deployment of the seatmounted side airbags if a collision occurs. It can also reduce the accuracy of the occupant detection system, if
equipped.
WARNING: Airbags inflate with considerable speed and force, which can cause injury. To limit injuries, ensure that
occupants are wearing seat belts and are correctly seated, with the seat positioned as far back as possible. The National
Highway Traffic Safety Administration (NHTSA) recommends a minimum distance of 10 inches (25 cm) between an
occupant’s chest and an airbag.
WARNING: Children should not be seated on the front passenger seat. Follow all regulations in your region for the
appropriate way to seat a child based on the child's weight, size, and age. The safest place to seat infants and young
children is in a rear seating position. Seating an infant or child on a seat equipped with an operational front airbag can
cause serious injury or death.
WARNING: Do not use a rear-facing child restraint system on a seat with an operational airbag in front of it. Doing so can
cause injury or death if the airbag inflates.
WARNING: To ensure correct inflation of the side airbags, maintain an unobstructed gap between an occupant’s torso
and the side of CybertruckModel SModel X.
WARNING: Passengers shouldn't lean their heads against doors. Doing so can cause injury if a curtain airbag inflates.
WARNING: Do not allow passengers to obstruct the operation of an airbag by placing feet, knees or any other part of the
body on or near an airbag.
WARNING: Do not attach or place objects on or near the front airbags, the side of the front seats, the headliner at the
side of the vehicle, or any other airbag cover that could interfere with inflation of an airbag. These include but are not
limited to: steering wheel covers, decals, seat cushions, pillows, etc. Objects can cause serious injury if the vehicle is in
a collision severe enough to cause the airbag to inflate.
WARNING: Following inflation, some airbag components are hot. Do not touch until they have cooled.

Owner's Manual

197

Owners Manual
Airbags
Location of Airbags
Airbags are located in the approximate areas shown below. Airbag warning information is printed on the sun visors.
CybertruckModel SModel X is equipped with an airbag and lap/shoulder belt (also called seat belt assembly) at both
designated front seating positions. The airbag is a supplemental restraint at those seating positions. All occupants, including
the driver, should always wear their seat belts whether or not an airbag is also provided at their seating position to minimize the
risk of severe injury or death in the event of a crash.

198

Owner's Manual

Owners Manual

Owner's Manual

199

Owners Manual

1. Passenger knee airbag
2. Passenger front airbag
3. Seat-mounted side airbags
NOTE: Vehicles manufactured prior to approximately mid-September 2022 are not equipped with a seat-mounted airbag
on the inside portion of the driver's seat.
4. Curtain airbags
5. Driver knee airbag
6. Driver front airbag

200

Owner's Manual

Owners Manual
How Airbags Work
Airbags inflate when sensors detect an impact that exceeds deployment thresholds. These thresholds are designed to predict
the severity of a crash in time for the airbags to help protect the vehicle's occupants. Airbags inflate instantly with
considerable force accompanied by a loud noise. The inflated bag, together with the seat belts, limits movement of occupants
to reduce the risk of injury.
Front airbags are not ordinarily designed to inflate in rear collisions, rollovers, side collisions and when braking heavily or
driving over bumps and potholes. Likewise, front airbags may not inflate in all frontal collisions, such as minor front collisions,
underride collisions, or minor impacts with narrow objects (such as posts or poles). Significant superficial damage can occur
to the vehicle without the airbags inflating and, conversely, a relatively small amount of structural damage can cause airbags to
inflate. Therefore, the external appearance of the vehicle after a collision does not represent whether or not the front airbags
should have inflated.
WARNING: Before modifying your vehicle to accommodate a person with disabilities in a way that may affect the airbag
system, use the mobile app to schedule a service appointment.
Types of Airbags
CybertruckModel SModel X has the following types of airbags:
• Front airbags: The front airbags are designed to reduce injuries if larger children or adults are riding in the front seats.
Follow all warnings and instructions related to seating a child on the front passenger seat (if permitted in your market
region).
• Knee airbags: Knee airbags and the front airbags work together. The knee airbags limit the forward motion of the front seat
occupants by restricting leg movement, thereby positioning the occupants so that the front airbags work more effectively.
• Seat-mounted airbags: A seat-mounted side airbag in the front seats helps protect the pelvis and the thorax region of the
torso. The seat-mounted airbag on the inside portion of the driver's seat helps protect the head and torso. Seat-mounted
airbags on both the impacted and non-impacted side of the vehicle inflate in the event of a severe side impact or a severe
offset frontal impact.
• Curtain airbags: Curtain airbags help protect the head. Curtain airbags on both the impacted and non-impacted side of the
vehicle inflate only if a severe side impact occurs, or if the vehicle rolls over.
Airbag Status Indicator
The status of the passenger front airbag displays on the touchscreen:
The Passenger Airbag Off indicator displays on the touchscreen when the passenger front airbag is OFF.
When the passenger front airbag is OFF, it does not inflate when a collision occurs. This indicator also
displays when the seat is unoccupied. When driving with a child seat on the front passenger seat (if
permitted in your market region), always double-check the status of the passenger front airbag to confirm
that it is OFF.
NOTE: In cars manufactured prior to approximately December 2019, the Passenger Airbag Off indicator does
not display when the seat is unoccupied.
To protect an adult occupying the front passenger seat, ensure the passenger front airbag is ON. When the
passenger airbag is ON, it may inflate when a collision occurs.
The airbag indicator displays on the touchscreen for a few seconds at the start of every drive while checking
the following functionality, as applicable:
• Airbags
• Seat belts with pre-tensioners and load limiters
• Impact sensors
• Occupant sensors
Seat belt sensors
• Passive safety component wiring harnesses

Owner's Manual

201

Owners Manual
• Onboard restraint controlled components (ex: accelerometer and other passive safety components)
After this check, the airbag indicator turns off. If the airbag system detects a fault in any of the previously
mentioned components, the airbag warning indicator stays on. In this case contact Tesla service immediately.
Do not drive the vehicle until the airbag system is inspected by Tesla.
The airbag indicator on the instrument cluster remains lit if the airbag system is malfunctioning. The only time
this indicator should illuminate is briefly when CybertruckModel SModel X first powers up, in which case it
turns off within a few seconds. If it remains illuminated, use the mobile app to schedule a service
appointment immediately and do not drive.

Front Passenger Occupant Detection
CybertruckModel SModel X has an occupancy sensor in the front passenger seat that controls the status of the front airbag.
NOTE: The occupancy classification system (OCS) meets the regulatory requirement of FMVSS 208 and automatically detects
when inflating the passenger front airbag would be unnecessary or potentially harmful.
WARNING: Seating an infant in a rear facing child restraint system on a seat equipped with an operational airbag can
cause serious injury or death.
Object Classification

Status of Airbag
Indicator*

Indicator

Notes

Empty

OFF

PASSENGER AIRBAG OFF

In cars manufactured prior to
approximately December 2019, the
Passenger Airbag Off indicator
does not display when the seat is
unoccupied.

Object

OFF or ON

PASSENGER AIRBAG OFF or
PASSENGER AIRBAG ON

Depends on material/contents.

Rear facing child seateBay logo
designed for children up to a
year old

OFF

PASSENGER AIRBAG OFF

20 lbs (9 kg) or less

Forward facing child seateBay logo

OFF

PASSENGER AIRBAG OFF

35 lbs (16 kg) or less

Child in a booster seat

OFF or ON

PASSENGER AIRBAG OFF or
PASSENGER AIRBAG ON

20-100 lbs (9-45 kg)*

1...7891011...75

SaleBestseller No. 1
TOPDON RLink J2534 Pass-Thru Programmer, OEM Reprogramming and Diagnostic Tool, Enhanced J2534 VCI, Supports J2534/D-PDU/CAN-FD/DoIP, Compatible with 18+ Vehicle Brands, No OE Software Provided
289 Reviews
TOPDON RLink J2534 Pass-Thru Programmer, OEM Reprogramming and Diagnostic Tool, Enhanced J2534 VCI, Supports J2534/D-PDU/CAN-FD/DoIP, Compatible with 18+ Vehicle Brands, No OE Software Provided
  • J2534 Pass-Thru Programmer: TOPDON RLink J2534 is an...
  • All-in-One OEM Diagnostics: This J2534 ECU programming tool...
  • Proven Performance You Can Trust: Backed by over 10000 real...
  • Integrated Excellence, Always Up-to-Date: Featuring the...
  • Efficiency Meets Versatility: Engineered to support three...
SaleBestseller No. 2
TOPDON RLink J2534 Reprogramming Tool, High-Speed J2534 Pass-Thru Programmer, OEM Reprogramming and Diagnostic Tool, Supports J2534/D-PDU/CAN-FD/DoIP, 17+ Vehicle Brands Supported
  • Advanced VCI Box, Industry-leading J2534 Pass-Thru...
  • High-Speed OEM-Level Diagnostics & Programming: Unlock true...
  • Coverage for 17 Car Brands & Ultra Reliability: Works...
  • User-Friendly RLink Platform & Expert Support: TOPDON’s...
  • 6.6 ft USB-C Cable & Portable Storage Case: The RLink J...

If the PDF is very large, it may not load in the preview below.

Download PDF [32.24 MB]


Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.

If the TSB PDF does not show, download or view it on the NHTSA Website.

Click on the (+) Plus Sign

Then Click on Associated Document(s)


Search NHTSA Database for Recalls

View Latest Recalls


Search NHTSA Database for Vehicle Investigations

View Latest Vehicle Investigations


Search NHTSA Database for Vehicle Complaints

View Latest Vehicle Complaints


TSB/Document ID: 2024.32_0824.pdf

Replacement Service Bulletin Number:

MFR Communication Date: 2024-08-31

MFR Internal Campaign ID/Software Version: 07/16/1905

Communication Type: Over The Air

NHTSA Components: UNKNOWN OR OTHER

MFR Component System:

MFR Component Subsystem:


Previous TSB

Next TSB



Sale
THINKCAR Bidirectional OBD2 Scanner Diagnostic Tool 689BT - All System Scan Tool with Bluetooth 5.0, 3000+ Active Tests,ECU Coding, 34+ Services, FCA, CAN-FD and DoIP, Wireless Update
108 Reviews
THINKCAR Bidirectional OBD2 Scanner Diagnostic Tool 689BT - All System Scan Tool with Bluetooth 5.0, 3000+ Active Tests,ECU Coding, 34+ Services, FCA, CAN-FD and DoIP, Wireless Update
  • [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
  • Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
  • Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
  • 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
  • Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission, ABS, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
Sale
XTOOL D7S Bidirectional Scan Tool, 2026 AI-Assisted OBD2 Scanner Diagnostic Tool with FCA AutoAuth, All System Car Scanner, 39+ Resets, ECU C0ding, PMI, Upgrade of D7, Crankshaft Relearn, CAN FD/DoIP
  • Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCAeBay logo Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU c0ding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations
  • 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCAeBay logo AutoAuth: Now supports FCAeBay logo SGW module for ChryslereBay logo, for JeepeBay logo, for DodgeeBay logo (2018+), for FiateBay logo (2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Pr0gramming): Allows for FordeBay logo, for LincolneBay logo, and for MazdaeBay logo ECU pr0gramming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order
  • 39+ Services/Resets/Adaptations/Relearns/Calibrations: XTOOL D7S full system car scanner diagnostic tool tackles 99% of common car issues through its 36+ special functions, including Oil Reset, EPB, SAS, BMS, Throttle Reset, Injector C0ding, ABS Bleed, TPMS Reset, Power Balance, etc and also covers specific-vehicle functions like Crank Sensor Relearn, ABS Initialization, Cylinder Power Balance, Fuel Trim Reset, Idle Relearn etc. This car diagnostic scanner enhances efficiency, making repairs and maintenance hassle-free. Tip: DO NOT for All vehicles, please check compatibility first
  • Cost-effective ECU C0ding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMWeBay logo, for Benz and offline for BENZ, for MIT, along with PMI functions for FordeBay logo, for MazdaeBay logo, and for LincolneBay logo. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase
  • OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
Sale
2026 BOSSCOMM IF745 Scanner Diagnostic Tool, Check Engine Code Reader with 6 Resets, ABS Bleeder/Oil/EPB/SAS/Throttle/Battery, Scanner Diagnostic Tool for Vehicles, Lifetime Free Update, Auto VIN
  • 【✅Compared to BOSSCOMM IF742, IF745 Offers Full-System Diagnostics】The BOSSCOMM IF745 car diagnostic scanner is an upgraded model of IF742. In addition to supporting all OBD2 Code Reader functions and 6 reset options (ABS/EPB/SAS/BMS/Oil/Throttle), it expands diagnostics from 4 systems (Check Engine/ABS/SRS/Transmission) to vehicle All systems, including Steering, Suspension, and Body Electronics. This provides deeper, more comprehensive diagnostic capabilities.
  • 【✨10 OBD2 Functions】The BOSSCOMM IF745 scan tool’s DTC Lookup instantly translates fault codes into user-friendly explanations, its I/M Readiness feature streamlines emissions testing with a single tap, and Freeze Frame lets you pinpoint the exact moment of a fault for in-depth root-cause diagnosis. Combined with a live data dashboard and advanced diagnostics (O2S, OBMon, EVAP), it delivers comprehensive insights for confident troubleshooting.
  • 【✨Deep Diagnostics for All Vehicle System Modules】Beyond code reading/clearing and ECU information retrieval, our all-in-one data stream feature lets you inspect all current fault codes and their locations across the vehicle’s systems. This vehicle code reader helps you turn off dashboard warning lights and perform a comprehensive self-check of your car at home—no more back-and-forth trips to the repair shop or hefty inspection fees.
  • 【✨6 Essential Resets: ABS Bleeding, Oil, EPB, SAS, Throttle, BMS】The BOSSCOMM IF745 obd2 scanner diagnostic tool swiftly purges air from brake lines to restore braking sensitivity, fine-tunes maintenance cycles to eliminate false alerts, resolves parking brake issues with one-click control, recalibrates steering sensors for stability, optimizes engine idling/acceleration for smoother performance, and deeply resets battery systems to extend lifespan and range via precise parameter adjustments.❗NOTE: Does NOT support bidirectional control, coding, or programming.​
  • 【✨10,000+ Car Models, AutoVIN, 13 Languages】The BOSSCOMM IF745 vehicle scanner diagnostic tool covers 73+ global car brands and offers support in 13 languages, making it perfect for DIYers, auto mechanics, or as a thoughtful gift. With a single-click AutoVIN feature, it instantly retrieves vehicle serial numbers, streamlining diagnostics for users globally. This adaptable tool balances user-friendliness with precision, catering to both personal and professional requirements.✅Unsure about compatibility? Compatibility will vary on vehicles' model and year, pls reach us via 📧 [email protected] 📧 before purchase.

This product presentation was made with AAWP plugin.

Share to...