NHTSA ID Number: 11006914
Manufacturer Communication Number: 2024.32_0824.pdf
TSB/Document Date: 2024-09-04
Summary
Tesla
does not provide physical owner's manual copies. Instead, all available owner’s manual content is integrated into the vehicle software, and only the content relevant for a given vehicle, based on vehicle configuration and software version installed, is displayed on its touchscreen. This file contains all available owner’s manual content for the vehicle converted to PDF format, and given the distribution method and NHTSA’s submission format requirements, it is the best available representative copy of owner’s manual content. However, a customer who accesses the owner’s manual via their vehicle’s touchscreen would only see the parts of this PDF file that are relevant to their vehicle.
WARNING: Before allowing an automated feature to open or close a front door (rather than doing so manually), it is
important to check that the area around the door is free of obstacles (such as people and objects). You must proactively
monitor the door's movement to ensure that it does not contact a person or object. Failure to do so can result in damage
or serious injury.
Front Door Reset
Since your CybertruckModel SModel X does not have traditional door handles that you can pull from the outside, it is
equipped with pop actuators (sometimes referred to as "ice breakers") that are used to assist in opening the front doors in
cases where resistance is detected, such as ice buildup in cold weather. The pop actuator is located just above the front door
latch and extends as necessary to open the front door. Once the front door opens slightly, the pop actuator gently retracts
back into the door.
Owner's Manual
87
Owners Manual
If the pop actuator is unable to retract because it is stuck to or caught on something, the pop actuator can be extended
manually to extract the object by performing the following:
1. Carefully close the door latch using a pen, screwdriver, or comparable tool (never use a finger or body part and avoid
damaging the paint); CybertruckModel SModel X will detect this as though the door is closed.
2. Make sure CybertruckModel SModel X is unlocked, then press the exterior door handle or pull the interior door handle to
reset the latch and extend the pop actuator.
3. As the pop actuator extends out from the door, quickly extract the object.
WARNING: The pop actuator will attempt to retract back into the door almost immediately after the door handle is
pressed or pulled. The pop actuator retracts gently, but will not release automatically if something gets caught.
WARNING: As with all mechanical and moving parts on the vehicle, never put body parts in, or near, moving
components. Make sure children are monitored when opening and closing doors. Interacting with moving components,
including the pop actuator, can cause serious damage or bodily injury.
Opening and Closing Falcon Wing Doors
Model X has falcon wing doors that easily open and close by pressing a button, using a key fob, using the mobile app, or
touching the associated icon on the touchscreen. The falcon wing doors are equipped with several sensors that detect the
presence of people and objects and, if an object is detected, the door stops moving. Based on detected objects, the doors
may adjust their outward and upward movement in an attempt to avoid contacting the object. For example, if an object is
detected above Model X, the door's movement may extend further outward but lower, whereas if an object (or person) is
detected beside the door, the door may extend outward much less.
88
Owner's Manual
Owners Manual
WARNING: It is important to keep your hands clear of the falcon wing door frames at all times. Proactively check the
door frame area prior to closing, and monitor the movement of the door during closing to ensure that it does not come
into contact with a person or object. Failure to do so can result in damage or serious injury.
WARNING: Before opening or closing a falcon wing door, it is important to check that the area around the door is free of
obstacles (people and objects). Although the doors have many sensors, it can not detect all objects at all times,
particularly when moving. At any given moment, there may be areas near the door that are not in the detection zone.
Therefore, when opening or closing a falcon wing door, you and your passengers must stand away from the door as it is
moving, while proactively monitoring the door's movement and being prepared to take corrective action at any time. To
stop a door from moving, single-click the falcon wing door button on the key fob, press the switch on the door or door
pillar, or touch the button on the touchscreen.
To open a falcon wing door from outside Model X, press the door handle or double-press the falcon wing door button on the
key fob (see Keys on page 58Using the Key Fob on page 80).
To open a falcon wing door from inside Model X, press the switch located on the driver's side door pillar, or, on the
touchscreen, touch the associated door icon (Controls)(Controls > Locks):
NOTE: Falcon wing doors open only when Model X is stationary.
NOTE: If Model X is locked, using the switch (illustrated above) the first time unlocks the associated door. Using it a second
time opens it.
Owner's Manual
89
Owners Manual
CAUTION: Remove accumulation of snow or ice before opening a falcon wing door. Snow can get inside Model X and ice
can prevent the door from opening. In situations where water or snow has accumulated on the glass on top of the falcon
wing door, Tesla
recommends using the touchscreen or switch on the door pillar (instead of the external door handle or
key fob) to slowly open the falcon wing door for the first few inches (cm). Opening the falcon wing door slowly for the
first few inches (cm) mitigates the scenario of water, snow, etc. from entering the vehicle.
To close a falcon wing door, press the button located on the inside of the door. You can also use the key fob (see Using the Key
Fob on page 80Key Fob on page 60), use the switch on the door pillar (illustrated above), or touch the associated door icon on
the touchscreen (Controls)(Controls > Close).
If a falcon wing door or the front trunk is left open when you attempt to shift out of Park, the touchscreen displays a
notification requiring you to confirm your intent to drive. The falcon wing door automatically closes when your driving speed
reaches 10 mph (16 km/h). In addition, your vehicle speed is limited if you choose to keep the front trunk open while driving. It
is your responsibility to ensure doors and trunks are properly closed before driving.
NOTE: To prevent children from opening falcon wing doors using the interior switch, turn on child-protection locks using the
touchscreen (Controls > Vehicle > Child-Protection Lock)(Controls > Locks > Child Locks). See Child Locks on page 79ChildProtection Lock on page 92.
NOTE: You can configure Model X to open the falcon wing doors to a lower height setting by using the touchscreen (Controls
> Vehicle > Locks > Falcon Door Height).
NOTE: If a falcon wing door detects an obstacle while closing, it reverses a few inches before it stops moving.
WARNING: Whenever a front door is partially open (approximately 20°) as you are opening or closing the associated
falcon wing door, you MUST keep your hands (or any object) away from the opening edge of the front door. When a
falcon wing door passes by a partially opened front door, the distance between the two doors is very narrow. Objects,
such as hands or fingers, placed in this area, are not detected by sensors and can therefore become pinched between
the doors. To avoid bodily injury, it is a good practice to keep your hands away from the front door whenever you are
opening or closing a falcon wing door.
90
Owner's Manual
Owners Manual
CAUTION: In rainy weather, leaving a falcon wing open while opening the liftgate can result in rain water falling from the
liftgate into the rear seating area.
WARNING: When opening or closing a falcon wing door, it is important to proactively monitor the movement of the door
to ensure that it does not come into contact with a person or object. Failure to do so can cause serious damage or injury.
NOTE: In the unlikely event that CybertruckModel SModel X has no low voltage power, you will be unable to open the falcon
wing doors with the touchscreen or by pressing the switch located on the driver's side door pillar. See Opening Doors with No
Power on page 599 for more information.
Obstacle Detection
A falcon wing door stops moving when one of its many sensors detects an obstacle, or when the door senses resistance
because it has made contact with an object. The touchscreen displays a warning. In these cases, provided it is appropriate to
continue opening or closing the falcon wing door, you can override obstacle detection by pressing and holding the switch
located on the door pillar, or touching and holding the associated door icon on the touchscreen.
Owner's Manual
91
Owners Manual
When Model X detects a low ceiling (for example, in a garage), it opens the falcon wing doors (and trunk) to a lower height,
even if no obstacle is detected. You can override this height and open the doors higher by touching the associated door icon
on the touchscreen (Controls). The touchscreen displays a message asking you if you always want to open the doors to the
higher height at this location, and saves your choice. The next time you open the falcon wing doors at this location, Model X
opens them to the height you saved.
WARNING: Before overriding a falcon wing door's default opening height, visually inspect the area to ensure adequate
clearance between the door and the detected object.
WARNING: Applying adhesive products such as wraps, stickers, rubber coating, etc. on the outside of the falcon wing
doors can affect the sensors’ ability to detect obstacles properly.
Calibration
If the falcon wing doors lose calibration, a message displays on the touchscreen. To calibrate the doors, first ensure that both
doors have plenty of space to open and close and are clear of passengers, objects, etc. Then press and hold the Calibrate
button until calibration is complete. During calibration, the lower door opens all the way out (requiring extra space on the side
of Model X), the upper door moves all the way down, and then the lower door closes.
Calibration
If the falcon wing doors lose calibration, the main Controls window on the touchscreen displays a Calibration Required
message. To calibrate the doors, first ensure that both doors have plenty of space to open and close and are clear of
passengers, objects, etc. Touch Controls > Service > Calibrate Doors, and follow the instructions on the touchscreen. During
calibration, the lower door opens all the way out (requiring extra space on the side of Model X), the upper door moves all the
way down, and then the lower door closes.
Interior Locking and Unlocking
From inside CybertruckModel SModel X, you can use the touchscreen to lock or unlock doors and trunks, provided a valid key
is inside the vehicle. Touch the lock icon on the touchscreen's status bar.
When you stop CybertruckModel SModel X and engage Park, you can choose whether you want doors to unlock or remain
locked. To do so, touch Controls > Vehicle > Unlock on Park. When enabled, doors automatically unlock when you engage
Park.
You can also unlock doors and present handles by pressing the Park button on the end of the drive stalk a second time (for
example, after pressing it one time to engage Park).
NOTE: If a door or trunk is still open when you lock CybertruckModel SModel X, it locks when you close it.
Driver Door Unlock Mode
You can choose to unlock only the driver's door when you approach your vehicle carrying your key fob. To do so, touch
Controls > Vehicle > Driver Door Unlock Mode. To unlock the remaining doors, use the touchscreen or press the key fob a
second time.
Child-Protection Lock
CybertruckModel SModel X has child-protection locks on the rearfalcon wing doors and liftgate to prevent them from being
opened using interior handles. Use the touchscreen to turn child-protection locks on or off. Touch Controls > Vehicle > ChildProtection Lock.
NOTE: It is recommended that you turn child-protection locks on whenever children are seated in the rear seats.
Drive Away Locking
CybertruckModel SModel X automatically locks all doors (including the trunks) whenever your driving speed exceeds 5 mph
(8 km/h).
Walk-Away Door Lock
Doors and trunks automatically lock whenever you walk away carrying the key fob or if the key fob is otherwise not detected
by your vehicle (not present, dead battery, etc.).
To turn this feature on or off, touch Controls > Vehicle > Walk-Away Door Lock.
92
Owner's Manual
Owners Manual
NOTE: Touch Toybox > Boombox > Lock Sound to customize the lock sound when the vehicle is locked from the outside
(Pedestrian Warning System required).
Check the Exclude Home checkbox to prevent doors from locking when you walk away carrying the key fob when
CybertruckModel SModel X is parked at the location you have designated as Home. For details on how to designate a location
as Home, see Home, Work, and Favorite Destinations on page 447.
If you unlock CybertruckModel SModel X using the mobile app, it automatically locks after a short period of time if all doors
remain closed. If parked in an area without cellular service (such as an indoor parking garage), ensure that you have a
functional key fob available to unlock CybertruckModel SModel X.
If CybertruckModel SModel X detects an authenticated key fob for five minutes after you exit the vehicle and close all doors,
Walk-Away Door Lock disables and doors do not lock when you leave with the key fob. You will need to manually lock
CybertruckModel SModel X until after your next drive.
In addition, if all doors are closed and you use the key fob to unlock CybertruckModel SModel X, walk away locking is
temporarily suspended for one minute. If you open a door within this minute, it does not re-lock until after all the doors are
closed and you have walked away with the key fob.
NOTE: Depending on date of manufacture and options selected at time of purchase, some Model S vehicles are not equipped
with walk-away locking.
NOTE: It is ultimately your responsibility to ensure your vehicle is locked, even when Walk-Away Door Lock is enabled.
Unlocking When the Key Fob Doesn't Work
If CybertruckModel SModel X does not unlock when you walk up to it, or when you double-click the unlock button on the top
of your key fob, the key fob’s battery may be dead. Even if this is the case, you can still use the key fob to unlock and drive
CybertruckModel SModel X.
NOTE: Although you can still use your key fob, you should consider using the mobile app to remotely unlock and start the
vehicle. Then, replace your key fob's battery when convenient.
To unlock CybertruckModel SModel X (and disable the security alarm) using the key fob, first position the key fob near the
base of the passenger side windshield wiperat the base of the door pillar between the front door and the falcon wing door, on
the driver's side of the vehicle. Then press the front door handle on the right side of the vehicle. Then press the driver's door
handle. If CybertruckModel SModel X doesn't unlock, try adjusting the position of the key fob and try again. The key fob must
be in the correct position for the vehicle to unlock. If Model X still doesn't unlock, remove the key fob's battery and try again.
See Replacing the Key Fob Battery on page 82.
NOTE: The following illustration assumes a left hand drive (LHD) vehicle. On a right hand drive (RHD) vehicle, the locations are
mirrored.
Owner's Manual
93
Owners Manual
To drive CybertruckModel SModel X after gaining access to the cabin, place the bottom of the key fob against the center
console, immediately below the low voltage power outlet, then press and hold the brake pedal to start
CybertruckModel SModel X.
NOTE: Unlocking CybertruckModel SModel X using this method disables walk away locking. You must manually re-enable
walk away locking after replacing the key fob’s battery.
94
Owner's Manual
Owners Manual
Windows
Opening and Closing
NOTE: It is your responsibility to ensure windows are closed after locking the vehicle.
Press down on a switch to lower the associated window. Window switches operate at two levels:
• To lower a window fully, press the switch all the way down and immediately release.
• To lower a window partially, press the switch gently and release when the window is where you want it.
Similarly, pull a switch to raise the associated window:
• To raise a window fully, pull the switch all the way up and immediately release.
• To raise a window partially, pull the switch gently and release when the window is where you want it.
If a window is left open unintentionally, CybertruckModel SModel X can send a notification to the mobile app (touch Controls >
Locks > Car Left Open NotificationControls > Vehicle > Car Left Open Notification, then choose Doors & Windows).
Owner's Manual
95
Owners Manual
You can also enable Close Windows on Lock by touching Controls > Locks > Close Windows on Lock. When enabled, your
vehicle automatically closes the windows when CybertruckModel SModel X locks.
NOTE: See Cold Weather Best Practices on page 439 for information on preparing windows for cold weather.
CAUTION: To avoid damage, windows automatically lower slightly when you open or close a door. If you manually raise a
window when the door is open, ensure it is slightly lowered before closing the door.
WARNING: Before closing a window, it is the driver’s responsibility to ensure that all occupants, especially children, do
not have any body parts extended through the window’s opening. Failure to do so can cause serious injury.
Locking Rear Windows
To prevent passengers from using the rear window switches, touch Controls > Locks > Window Lock. To unlock the rear
windows, touch Window Lock again.
To prevent passengers from using the rear window switches, press the rear window lock switch. The switch light turns on. To
unlock rear windows, press the switch again.
WARNING: To ensure safety, it is recommended that you lock the rear window switches whenever children are seated in
the rear seats.
WARNING: Never leave children unattended in CybertruckModel SModel X.
UV Index Rating
The roof, windshields, and windows in CybertruckModel SModel X are excellent at protecting you from UV (ultraviolet) rays.
The glass components score less than 2 on the UV Index scale. Review your region’s UV Index specifications for more
information. You are still responsible for taking the necessary precautions for sun protection.
96
Owner's Manual
Owners Manual
Sunroof
Opening and Closing
If your CybertruckModel SModel X is equipped with a sunroof, you can vent and close the sunroof remotely using the mobile
app or you can adjust the position of the sunroof by controlling it from the menu on your right scroll wheel.
For full control of the sunroof, touch Controls on the touchscreen. Drag, or tap on, the image of the sunroof or touch the
buttons next to the image of your vehicle. The sunroof moves to the selected position. To stop the sunroof from moving at any
time, touch the image of the sunroof.
• OPEN: touch once to open the sunroof to its comfort position (75% open). Touch twice to open the sunroof fully.
• VENT: touch to open the sunroof slightly.
• CLOSE: touch to fully close the sunroof.
NOTE: If the sunroof detects any obstruction, it does not close. If, after removing the obstruction, it still does not close, touch
and hold CLOSE to override the sunroof’s anti-trap mechanism.
NOTE: If you find wind noise (which varies depending on driving speed) excessive, even with the sunroof in the comfort
position, open a window slightly.
CAUTION: Remove snow and ice before opening the sunroof. Opening a sunroof covered in snow and ice can cause
damage.
WARNING: Do not allow occupants to extend any part of their body through the sunroof. Doing so can cause serious
injury from flying debris, tree branches, or other obstructions.
WARNING: Before closing the sunroof, ensure that occupants, especially children, do not have any body part extended
through the sunroof opening. Failure to do so can cause serious injury.
WARNING: Do not carry an object that protrudes through the sunroof. Doing so can damage the sunroof’s seals and
anti-trap mechanism, and can cause injury to occupants.
Owner's Manual
97
Owners Manual
Sun Visors
The sun visors in Model X are held in place by magnets. To protect occupants from sunlight coming through the windshield,
release the sun visor from the pillar and pivot it toward the rear view mirror until the magnet snaps into place. While held in
place by the magnet, you can adjust the sun visor and lower the extender to provide maximum shade.
To expose the vanity mirror, lower the visor extender then lower the mirror cover. While the cover is lowered, the mirror is
exposed and lights are illuminated.
98
Owner's Manual
Owners Manual
To protect front seat occupants from sunlight coming through the side window, lower the sun visor from the pillar then lower
the visor extender.
Storage Areas
Owner's Manual
99
Owners Manual
Rear Trunk
Opening
To open the rear trunk, ensure CybertruckModel SModel X is in Park, then do one of the following:
• Approach the trunk with your phone key in your front pocket (see Hands-Free Trunk on page 102).
• Touch Controls > Trunk on the touchscreen.
• Double-click the rear trunk button on the key fob.
• Touch the rear trunk button on the mobile app.
• Press the switch located under the liftgate's exterior handle (a valid key must be detected).
NOTE: If Passive Entry is off, you must use a key fob to unlock CybertruckModel SModel X before you can use the switch to
open the liftgate. See Using the Key Fob on page 80.
CAUTION: Before opening the liftgate in an enclosed area (such as a garage), ensure the opening height of the liftgate is
properly adjusted to avoid low-hanging ceilings or objects (see Adjusting Liftgate Opening Height on page 103).
CybertruckModel SModel X must be unlocked or detect a key before you can use the switch to open the liftgate.
100
Owner's Manual
Owners Manual
Owner's Manual
101
Owners Manual
The instrument panel informs you when a door or trunk is open.
When a door, trunk or liftgate is open, the instrument panel displays the Door Open indicator light. The image of
your CybertruckModel SModel X on the touchscreen also displays the open trunk.
To stop a liftgate while it is moving, single-click the rear trunk button on the key fob. Then, when you double-click the rear
trunk button, it moves again, but in the opposite direction (provided it was not almost entirely open or closed when you
stopped it). For example, if you single-click to stop the liftgate while opening, when you double-click, it closes.
NOTE: In emergency situations, you can override an open or close command by grasping the liftgate to stop it in place.
To open the liftgate from inside the vehicle in the unlikely situation that CybertruckModel SModel X has no power, see Interior
Emergency Trunk Release on page 108.
If Model X detects a low ceiling (for example, in a garage), it opens the liftgate (and falcon wing doors) to a lower height, even
if no obstacle is detected. You can override this height by manually lifting it higher. When doing so, the touchscreen prompts
you to choose if you always want the trunk to open to this higher position at this location, and saves your choice. If you choose
to do so, the next time you open the liftgate at this location, Model X opens it to the saved height.
WARNING: Before opening or closing the liftgate, check the surrounding area (for people and objects). Although the
liftgate can detect obstacles, it cannot detect all objects at all times. Do not rely on the liftgate to sense an obstruction
when opening or closing. You must proactively monitor the liftgate to ensure that it does not come into contact with a
person or object. Failure to do so may result in damage or injury.
Hands-Free Trunk
You can open the trunk without pressing a button.
102
Owner's Manual
Owners Manual
NOTE: Requires an iPhone 11 or newer and Tesla
mobile app 4.29.5 or higher. Ensure your phone settings allow "Nearby
Interactions" for the Tesla
mobile app. If your phone key is already paired, open the Tesla
mobile app and go to Phone Key >
Upgrade.
1. To enable, touch Controls > Locks > Hands-Free Trunk.
2. With your phone key in your front pocket, approach the trunk and stand still. When your phone key has been detected,
CybertruckModel SModel X chimes and the trunk opens. To cancel the request, step away from the vehicle.
CAUTION: Do not leave your phone inside the trunk as it may open by itself. If you must leave your phone in the vehicle,
disable Bluetooth and/or turn the phone off, and ensure you have alternate methods to lock/unlock your vehicle, see
Keys on page 58.
WARNING: Before allowing an automated feature to open the trunk (rather than doing so manually), it is important to
check that the area around the trunk is free of obstacles (such as people and objects). Proactively monitor the trunk's
movement to ensure that it does not contact a person or object. Failure to do so can result in damage or serious injury.
Adjusting Liftgate Opening Height
If CybertruckModel SModel X is equipped with a liftgate, you can adjust its opening height to make it easier to reach or to
avoid low-hanging ceilings or objects (for example, a garage door or light):
Owner's Manual
103
Owners Manual
You can adjust the opening height of the liftgate to make it easier to reach or to avoid low-hanging ceilings or objects (for
example, a garage door or light):
1. Open the trunk, then manually lower or raise the liftgate to the desired opening height.
2. Press and hold the button on the underside of the liftgate for three seconds until you hear a confirmation chime.
104
Owner's Manual
Owners Manual
3. Confirm that you have set it to the desired height by closing the liftgate, then reopening it.
CAUTION: Depending on configuration (such as suspension height or wheel selection), your vehicle's liftgate can open
up to approximately 7.5 feet (2.3 meters)8 feet (2.5 meters) high. Adjust the liftgate height to prevent it from coming
into contact with low ceilings or other objects.
Closing
If Model S is not equipped with a liftgate, close the rear trunk by pulling down on the liftgate and pushing firmly until it is fully
closed.
To close the liftgate, do one of the following:
• Touch Controls > Trunk.
• Double-click the rear trunk button on the key fob.
• Press the switch located on the underside of the liftgate
Owner's Manual
105
Owners Manual
If the liftgate senses an obstruction when closing, it stops moving and chimes two times. Remove the obstruction and try
closing it again.
If the liftgate loses its calibration when opened, the liftgate chimes three times and does not move. To restore calibration,
manually pull the liftgate down to close it.
Interior Release
To open the rear trunk from inside a Model S equipped with the Tesla Built-In Rear Facing Child Seats
, press the interior
release switch located inside the rear trunk and push the liftgate up. If Model S is locked and is equipped with a liftgate, the
first press unlocks the rear trunk and the second press opens it.
NOTE: If Model S is not equipped with the Tesla Rear Facing Child Seats
, the switch may appear to exist, but it is inactive and
pressing it does not release the liftgate.
If Model S is equipped with the power liftgate, you do not need to push it up. When you press the release switch, it opens, and
when you pull the switch, it closes.
NOTE: The interior release switch is disabled if child-protection locks are turned on (see Child-Protection Lock on page 92),
or if CybertruckModel SModel X is moving.
Accessing the Cargo Area
To access the cargo area inside the rear trunk, pull up the strap at the rear of the cargo cover. You can then fold the cargo
cover forward or remove it from CybertruckModel SModel X.
Secure all cargo before moving CybertruckModel SModel X, and place heavy cargo in the lowerupper trunk compartment.
106
Owner's Manual
Owners Manual
To access the cargo area inside the rear trunk, push down on the ridged portion of the handle of the cargo cover and then pull
up. You can then adjust the position of the cargo cover or completely remove it.
Owner's Manual
107
Owners Manual
Rear Trunk Load Limits
Distribute the weight of cargo as evenly as possible between the front and rear trunks.
CAUTION: Never load more than 176 lbs (80 kg)in the upper compartment of the rear trunk or more than 285 lbs (130
kg) in the lower compartment. Doing so can cause damage.
CAUTION: Never load more than 88 lbs (40 kg) in the lower compartment of the rear trunk or more than 285 lbs (130 kg)
on the upper compartment (above the lower compartment cover). Doing so can cause damage.
WARNING: When loading cargo, always consider the vehicle's Gross Vehicle Weight Rating (GVWR) (see Specifications
on page 529). The GVWR is the maximum allowable total mass of the vehicle including all passengers, fluids, and cargo.
Interior Emergency Trunk Release
An illuminated mechanical release located inside the rear trunk allows you to open the rear trunk from the inside if
CybertruckModel SModel X has no electrical power. This mechanical release also allows a person locked inside to get out.
1. Remove the cover by pulling its lower edge very firmly toward you.
2. Pull the cable to release the latch.
3. Push the rear trunk open.
NOTE: The button glows for several hours after a brief exposure to ambient light.
WARNING: Do not allow children to play inside the trunk or become locked inside. An unrestrained child could suffer
serious injury or death in a crash. A child could suffer heat exhaustion or death if trapped in the vehicle, especially
without climate control on. If your CybertruckModel SModel X is equipped with Tesla built-in rear facing child seats
, see
Tesla Built-In Rear Facing Child Seats
on page 181 and ensure all restrictions, instructions, and warnings are followed.
108
Owner's Manual
Owners Manual
Front Trunk
Opening
To open the front trunk, ensure CybertruckModel SModel X is in Park, and then do one of the following before pulling the hood
open:
• Touch Controls > Front Trunk on the touchscreen.
• Touch Controls > Frunk on the touchscreen.
• Double-click the front trunk button on the key fob.
• Touch the front trunk button in the mobile app.
Owner's Manual
109
Owners Manual
The instrument panel displays when a door, trunk, or liftgate is open.
When a door or trunk/liftgate is open, the instrument panel displays the Door Open indicator light. The image of
your CybertruckModel SModel X on the touchscreen also displays the open front trunk.
WARNING: Before opening or closing the hood, it is important to check that the area around the hood is free of
obstacles (people and objects). Failure to do so may result in damage or serious injury.
Closing
The CybertruckModel SModel X hood is not heavy enough to latch under its own weight and applying pressure on the front
edge or center of the hood can cause damage.
To properly close the hood:
1. Lower the hood until the striker touches the latches.
2. Place both hands on the front of the hood in the areas shown (in green), then press down firmly to engage the latches.
3. Carefully try to lift the front edge of the hood to ensure that it is fully closed.
110
Owner's Manual
Owners Manual
Owner's Manual
111
Owners Manual
112
Owner's Manual
Owners Manual
CAUTION: To prevent damage:
• Apply pressure only to the green areas shown. Applying pressure to the red areas can cause damage.
• Do not close the hood with one hand. Doing so applies concentrated force in one area and can result in a dent or
crease.
• Do not apply pressure to the front edge of the hood. Doing so can crease the edge.
• Do not slam or drop the hood.
• To avoid scratches, don't have anything in your hands (keys). Jewelry can also cause scratches.
WARNING: Before driving, you must ensure that the hood is securely latched in the fully closed position by carefully
trying to lift the front edge of the hood upward and confirming there is no movement. It is the driver's responsibility to
ensure that the front trunk is properly closed before driving.
If a falcon wing door or the front trunk is left open when you attempt to shift out of Park, a notification requiring you to confirm
your intent to drive appears on the touchscreen. The falcon wing doors may automatically close once you begin to accelerate.
In addition, your vehicle speed is limited if you choose to keep the front trunk open while driving.
If the front trunk is left open when you attempt to shift out of Park, a notification requiring you to confirm your intent to drive
appears on the touchscreen. If you choose to keep the front trunk open while driving, your vehicle speed is limited.
The front trunk locks when:
• You lock CybertruckModel SModel X using the touchscreen, key or mobile app.
Owner's Manual
113
Owners Manual
• You leave CybertruckModel SModel X carrying your key (if Walk-Away Door Lock on page 92Walk-Away Door Lock on
page 79 is turned on).
• Valet mode is active (see Valet Mode on page 300).
Front Trunk Load Limit
Distribute the weight of cargo as evenly as possible between the front and rear trunks.
CAUTION: Never load more than 110 lbs (50 kg) in the front trunk. Doing so can cause damage.
CAUTION: Never load more than 300 lbs (136 kg) in the front trunk. Doing so can cause damage.
WARNING: When loading cargo, always consider the vehicle's Gross Vehicle Weight Rating (GVWR) (see Specifications
on page 529). The GVWR is the maximum allowable total mass of the vehicle including all passengers, fluids, and cargo.
Interior Emergency Release
An illuminated interior release button inside the front trunk allows a person locked inside to get out.
Press the interior release button to unlatch the front trunk, then push up on the hood.
NOTE: The interior release button glows following a brief exposure to ambient light.
WARNING: People should never climb inside the front trunk. Never shut the front trunk when a person is inside.
WARNING: Care should be taken to ensure that objects inside the front trunk do not bump against the release button,
causing the hood to accidentally open.
114
Owner's Manual
Owners Manual
Interior Storage
Center Console
In addition to housing an RFID transmitter that reads key fobs and key cards (see Keys on page 58), the center console
includes cup holders, two storage compartments, various chargers (see Interior Electronics on page 28), and a rear
touchscreen.
To open the main storage compartment, squeeze the latch under the front lip. Open the front storage compartment by sliding
its cover forward.
CybertruckModel SModel X has two cupholders that slide out under the rear touchscreen.
Rear Console
Your CybertruckModel SModel X has a rear console integrated in the center of the second row. This console can serve as an
arm rest for rear passengers.
To lower the console, press the button on the top back of the center seat. To raise the console, push it all the way upwards.
Owner's Manual
115
Owners Manual
To access the storage tray and wireless phone charger (see Interior Electronics on page 28), raise the cover by pressing the
latch on the underside of it and pulling it up.
Glovebox
To open the glovebox, touch Controls > Glovebox. The glovebox automatically opens and the light turns on.
116
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: 2024.32_0824.pdf
Replacement Service Bulletin Number:
MFR Communication Date: 2024-08-31
MFR Internal Campaign ID/Software Version: 07/16/1905
Communication Type: Over The Air
NHTSA Components: UNKNOWN OR OTHER
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
- Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
- 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
- Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission, ABS, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
- Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCA
Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU c0ding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations - 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCA
AutoAuth: Now supports FCA
SGW module for Chrysler
, for Jeep
, for Dodge
(2018+), for Fiat
(2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Pr0gramming): Allows for Ford
, for Lincoln
, and for Mazda
ECU pr0gramming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order - 39+ Services/Resets/Adaptations/Relearns/Calibrations: XTOOL D7S full system car scanner diagnostic tool tackles 99% of common car issues through its 36+ special functions, including Oil Reset, EPB, SAS, BMS, Throttle Reset, Injector C0ding, ABS Bleed, TPMS Reset, Power Balance, etc and also covers specific-vehicle functions like Crank Sensor Relearn, ABS Initialization, Cylinder Power Balance, Fuel Trim Reset, Idle Relearn etc. This car diagnostic scanner enhances efficiency, making repairs and maintenance hassle-free. Tip: DO NOT for All vehicles, please check compatibility first
- Cost-effective ECU C0ding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMW
, for Benz and offline for BENZ, for MIT, along with PMI functions for Ford
, for Mazda
, and for Lincoln
. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase - OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
- 【✅Compared to BOSSCOMM IF742, IF745 Offers Full-System Diagnostics】The BOSSCOMM IF745 car diagnostic scanner is an upgraded model of IF742. In addition to supporting all OBD2 Code Reader functions and 6 reset options (ABS/EPB/SAS/BMS/Oil/Throttle), it expands diagnostics from 4 systems (Check Engine/ABS/SRS/Transmission) to vehicle All systems, including Steering, Suspension, and Body Electronics. This provides deeper, more comprehensive diagnostic capabilities.
- 【✨10 OBD2 Functions】The BOSSCOMM IF745 scan tool’s DTC Lookup instantly translates fault codes into user-friendly explanations, its I/M Readiness feature streamlines emissions testing with a single tap, and Freeze Frame lets you pinpoint the exact moment of a fault for in-depth root-cause diagnosis. Combined with a live data dashboard and advanced diagnostics (O2S, OBMon, EVAP), it delivers comprehensive insights for confident troubleshooting.
- 【✨Deep Diagnostics for All Vehicle System Modules】Beyond code reading/clearing and ECU information retrieval, our all-in-one data stream feature lets you inspect all current fault codes and their locations across the vehicle’s systems. This vehicle code reader helps you turn off dashboard warning lights and perform a comprehensive self-check of your car at home—no more back-and-forth trips to the repair shop or hefty inspection fees.
- 【✨6 Essential Resets: ABS Bleeding, Oil, EPB, SAS, Throttle, BMS】The BOSSCOMM IF745 obd2 scanner diagnostic tool swiftly purges air from brake lines to restore braking sensitivity, fine-tunes maintenance cycles to eliminate false alerts, resolves parking brake issues with one-click control, recalibrates steering sensors for stability, optimizes engine idling/acceleration for smoother performance, and deeply resets battery systems to extend lifespan and range via precise parameter adjustments.❗NOTE: Does NOT support bidirectional control, coding, or programming.
- 【✨10,000+ Car Models, AutoVIN, 13 Languages】The BOSSCOMM IF745 vehicle scanner diagnostic tool covers 73+ global car brands and offers support in 13 languages, making it perfect for DIYers, auto mechanics, or as a thoughtful gift. With a single-click AutoVIN feature, it instantly retrieves vehicle serial numbers, streamlining diagnostics for users globally. This adaptable tool balances user-friendliness with precision, catering to both personal and professional requirements.✅Unsure about compatibility? Compatibility will vary on vehicles' model and year, pls reach us via 📧 [email protected] 📧 before purchase.
This product presentation was made with AAWP plugin.




