information, see Phone, Calendar, and Web Conferencing on page 363.

Adjusting Climate Control Settings
NOTE: Easily adjust your climate preferences, such as turning on the seat heater or changing the cabin temperature, handsfree by using voice commands (see Voice Commands on page 97).

Owner's Manual

671

Owners Manual

672

Owner's Manual

Owners Manual

NOTE: For one-touch access to seat heaters and defrosters, you can add these controls to My Apps. See Customizing My
Apps on page 32.
1. Touch to turn the climate control system on or off.
2. Touch the driver's side seat icon to adjust seat heaters for the driver. The seat operates at three levels from 3 (highest) to 1
(lowest). The seat icon displays twisting lines that turn red (heating) or blue (cooling) corresponding with the set level.
Auto, which displays when the climate control system is set to Auto, warms or cools the front seats based on cabin
temperature. For one-touch access to seat heaters, you can add them to the touchscreen's bottom bar (see Customizing
My Apps on page 32).
3. Touch to turn on the wiper defrosters (if equipped). Wipers defrost for 30 minutes then turn off automatically.
4. Touch to control the heated steering wheelsteering yoke (or steering wheel), if equipped. The icon displays red twisting
lines that correspond to the set level. If set to Auto, the steering wheel is heated as needed, based on cabin temperature,
whenever the climate control system is set to Auto. For one-touch access, you can add this control to the touchscreen's
bottom bar (see Customizing My Apps on page 32).
5. Touch to warm up the rear windshield. After 15 minutes, the rear window defroster automatically turns off. The exterior side
mirrors and charge port and charge port and charge port (on some vehicles) are also heated whenever the rear window
defroster is operating. See Cold Weather Best Practices on page 695 for more information on preparing for cold weather.
6. The windshield defroster distributes air flow to the windshield. Touch once to defog the windshield (the icon turns blue).
Touch a second time to defrost the windshield. Touch a third time to turn off and restore the air distribution, heating, and
fan to their previous settings.
7. Use the slider to adjust the fan speed. When in Auto, the fan speed levels change to Low/ Medium/ High.
NOTE: Adjusting the fan speed may change the selected setting for how air is drawn into CybertruckModel SModel XModel
3Model Y in order to increase or reduce air flow.
8. Touch to control the flow of air inside the cabin. Air can be drawn into CybertruckModel SModel XModel 3Model Y from
outside or air can be recirculated inside the cabin.
9. If your CybertruckModel SModel XModel 3Model Y is equipped with the medical-grade HEPA (High Efficiency Particulate
Air) filter, this filter ensures the best quality air inside the cabin whenever the climate control system is on and outside air is
entering the cabin (recirculate is off). The HEPA filter is extremely effective at removing particles, including pollution,
allergens, bacteria, pollen, mold spores, and viruses. Both the HEPA filter and the secondary filtration system also contain
activated carbon to remove a broad spectrum of odors and gases. When you engage Bioweapon Defense Mode, the
positive pressure inside the cabin minimizes the amount of outside air that can enter the vehicle.

Owner's Manual

673

Owners Manual
NOTE: Some gases, such as carbon monoxide, are not effectively removed by activated carbon.
10. Touch the passenger's side seat icon to adjust seat heaters for the front passenger. The seat operates at three levels from 3
(highest) to 1 (lowest). The seat icon displays twisting lines that turn red (heating) or blue (cooling) corresponding with the
set level. Auto, which displays when the climate control system is set to Auto, warms or cools the front seats based on
cabin temperature. For one-touch access to seat heaters, you can add them to the touchscreen's bottom bar (see
Customizing My Apps on page 32).
11. Touch to adjust how air flows from the front vents. When the climate control system is operating, the passenger front vent
can be turned off independently of driver's vent by touching and holding the front passenger air wave on the touchscreen
and following the instructions. See Adjusting the Front and Rear Vents on page 687Ventilation on page 683Ventilation on
page 683.
12. When CybertruckModel SModel XModel 3Model Y is in Park, touch Schedule to set a recurring daily time when you want
CybertruckModel SModel XModel 3Model Y to be ready to drive by preconditioning the Battery and cabin climate and/or
charging during off-peak hours (see Scheduled Precondition and Charge on page 745).
13. Touch to adjust the climate settings for the front or rear cabin. If Auto is enabled for the rear cabin and a passenger is
detected, the set temperature is maintained for the rear cabin (see Ventilation on page 683)(see Ventilation on page 683)
(see Adjusting the Front and Rear Vents on page 687).
14. When in Park, these settings display to allow you to keep the climate control system operating, even when you leave
CybertruckModel SModel XModel 3Model Y (see Keep Climate On, Dog, and Camp on page 679).
NOTE: To turn them on, the Battery's charge level must be at least 20%.
15. Choose where air flows into the front cabin (windshield, face-level, or foot-level vents). You can choose one or more vents.
16. Touch to turn the air conditioning system on or off. Turning it off reduces cooling, but saves energy.
NOTE: Because CybertruckModel SModel XModel 3Model Y runs much quieter than a gasoline-powered vehicle, you may
notice the sound of the air conditioning compressor as it is operating. To minimize noise, reduce the fan speed.
17. Touch Auto to turn the Auto setting on or off.
NOTE: When in Auto, the fan speed may automatically lower to reduce the sound of ambient noise while on a call. For more
information, see Phone, Calendar, and Web Conferencing on page 363.

Adjusting Climate Control Settings
NOTE: Easily adjust your climate preferences, such as turning on the seat heater or changing the cabin temperature, handsfree by using voice commands (see Voice Commands on page 97).

674

Owner's Manual

Owners Manual

Owner's Manual

675

Owners Manual

NOTE: For one-touch access to seat heaters and defrosters, you can add these controls to My Apps. See Customizing My
Apps on page 32.
1. Touch to turn the climate control system on or off.
2. Touch Auto to turn the Auto setting on or off.
3. Touch the driver's side seat icon to adjust seat heaters for the driver. The seat operates at three levels from 3 (highest) to 1
(lowest). For one-touch access to seat heaters, you can add them to the touchscreen's bottom bar (see Customizing My
Apps on page 32).
4. Touch to turn on the wiper defrosters (if equipped). Wipers defrost for 15 minutes then turn off automatically.
5. Touch to turn the heater on or off for the steering wheel (if equipped).
6. Touch to adjust the climate settings for the rear cabin. If set to Auto, the rear vents turn on automatically when the front
climate system is on and a passenger is detected.
7. When in Park, these settings display to allow you to keep the climate control system operating, even when you leave
CybertruckModel SModel XModel 3Model Y (see Keep Climate On, Dog, and Camp on page 679).
8. Touch to turn all seat heaters off.
9. Touch to adjust seat heaters for front and rear seats.
10. Touch the passenger's side seat icon to adjust seat heaters for the front passenger. The seat operates at three levels from 3
(highest) to 1 (lowest). For one-touch access to seat heaters, you can add them to the touchscreen's bottom bar (see
Customizing My Apps on page 32).

676

Owner's Manual

Owners Manual
11. If your CybertruckModel SModel XModel 3Model Y is equipped with the medical-grade HEPA (High Efficiency Particulate
Air) filter, this filter ensures the best quality air inside the cabin whenever the climate control system is on and outside air is
entering the cabin (recirculate is off). The HEPA filter is extremely effective at removing particles, including pollution,
allergens, bacteria, pollen, mold spores, and viruses. Both the HEPA filter and the secondary filtration system also contain
activated carbon to remove a broad spectrum of odors and gases. When you engage Bioweapon Defense Mode, the
positive pressure inside the cabin minimizes the amount of outside air that can enter the vehicle.
NOTE: Some gases, such as carbon monoxide, are not effectively removed by activated carbon.
12. When CybertruckModel SModel XModel 3Model Y is in Park, touch Schedule to set a recurring daily time when you want
CybertruckModel SModel XModel 3Model Y to be ready to drive by preconditioning the Battery and cabin climate and/or
charging during off-peak hours (see Scheduled Precondition and Charge on page 745).
13. The windshield defroster distributes air flow to the windshield. Touch once to defog the windshield (the icon turns blue).
Touch a second time to defrost the windshield. Touch a third time to turn off and restore the air distribution, heating, and
fan to their previous settings.
14. Touch to control the flow of air inside the cabin. Air can be drawn into CybertruckModel SModel XModel 3Model Y from
outside or air can be recirculated inside the cabin.
15. Use the slider to adjust the fan speed.
NOTE: Adjusting the fan speed may change the selected setting for how air is drawn into CybertruckModel SModel XModel
3Model Y in order to increase or reduce air flow.
16. Touch to turn the air conditioning system on or off. Turning it off reduces cooling, but saves energy.
NOTE: Because CybertruckModel SModel XModel 3Model Y runs much quieter than a gasoline-powered vehicle, you may
notice the sound of the air conditioning compressor as it is operating. To minimize noise, reduce the fan speed.
17. Choose where air flows into the front cabin (windshield, face-level, or foot-level vents). You can choose one or more vents.

Owner's Manual

677

Owners Manual
Climate Popup
Touch the temperature arrows on the bottom of the touchscreen to display a popup for easy access to some of the most
common climate controls:

NOTE: For one-touch access to seat heaters and defrosters, you can add these controls to My Apps. See Customizing My
Apps on page 32.

678

Owner's Manual

Owners Manual
1. Touch to access the main climate controls screen.
2. Enable or disable heated or cooled seats (if equipped).
3. Enable or disable heated or cooled front seats.
4. Enable or disable heated seats.
5. Enable or disable heated seats.
6. Enable or disable the front or rear windshield defrosters.
7. Modify the cabin temperature by dragging the slider. You can also enable temperature splitting which allows the driver and
front passenger to customize their own climate preferences. The front passenger can touch the temperature icon on the
bottom of the touchscreen or the main climate controls screen to adjust. Touch Split again to disable climate splitting.
Keep Climate On, Dog, and Camp
The Keep Climate On, Dog, and Camp settings allow you to keep the climate control system running when in Park, even after
you've left CybertruckModel SModel XModel 3Model Y or choose to stay inside the vehicle. These settings are useful when it
is important to maintain the cabin temperature in hot or cold weather conditions. For example, when leaving groceries in
CybertruckModel SModel XModel 3Model Y on hot days, you may want to use Keep Climate On to prevent spoilage.
Dog is designed to maintain a comfortable cabin temperature for your pet while you actively and frequently monitor this
temperature using the mobile app (which requires both your phone and the vehicle to have cellular connectivity). When in Dog,
the touchscreen displays the current cabin temperature to inform people passing by that your pet is safe. This setting is not
intended for people, and should only be used for short periods of time while you stay in close proximity should you need to
return to the vehicle in situations where the temperature can no longer be maintained.
NOTE: To avoid accidentally pressing the window switch (such as your dog stepping on it), the windows cannot be rolled down
while Dog is enabled.
NOTE: If Dog and Sentry are enabled at the same time, Sentry defaults to Disable Sentry Sounds to protect your pet. See
Sentry Mode on page 665 for more information.
Live Camera view is now available if Sentry Mode or Dog Mode, or both, are enabled. When Sentry Mode is on, the cameras
show a live view of the vehicle's surroundings. When Dog Mode is on, the interior cabin camera shows the inside of the vehicle
so you can check on your pet at any time. If both are enabled, switch the camera views by touching the gray circles or the
interior icon that correspond to different cameras on the mobile app. See Sentry Mode on page 665 for more information.
NOTE: Enabling the interior cabin camera for Dog or Sentry Mode requires the mobile app version 4.15.0 or higher. This feature
is not supported in vehicles with Autopilot computer 2.0 or 2.5. Touch Controls > Software > Autopilot computer to find out
which computer your vehicle has.
NOTE: View Live Camera is limited to approximately one hour (or 15 minutes for some regions) of cumulative usage per day.
Camp allows you to power electronics through the USB ports and low voltage outlet in addition to maintaining the cabin
temperature. The touchscreen remains on so you can play music, browse the internet, play games in the arcade, or watch
shows in Tesla Theater. You can also control media and climate settings from a paired phone. Camp is ideal for remaining
inside your vehicle, such as camping or staying with a child. While active, Sentry Mode and the vehicle alarm system are
disabled. Walk-Away Door Lock is inactive.
To operate Keep Climate On, Dog, or Camp:
1. Make sure the Battery's charge level is at least 20%.
2. Engage Park. The Keep Climate On, Dog, and Camp settings are available only when CybertruckModel SModel XModel
3Model Y is in Park.
3. If necessary, adjust the climate settings.
4. On the climate controls screen, touch Keep Climate On, Dog, or Camp.
NOTE: You can also control Dog and Camp from the mobile app, by swiping up from the gray bar on the Climate screen.
The climate control system attempts to maintain your climate settings until you shift out of Park or manually turn it off. Avoid
using Keep Climate On, Dog, or Camp when the Battery's charge level is low. If the Battery's charge level drops below 20%,
the Tesla mobile app attempts to repeatedly send notifications reminding you to check on anything that you have left in
CybertruckModel SModel XModel 3Model Y.

Owner's Manual

679

Owners Manual
NOTE: Software updates cannot be performed when Keep Climate On, Dog, or Camp is active.
NOTE: The intrusion sensor (if equipped) automatically disables when Keep Climate On, Dog, or Camp is active. However, you
can override this behavior and keep the intrusion sensor enabled. To do so, touch Controls > Safety > Tilt/Intrusion after
enabling Keep Climate On, Dog, or Camp. However, note that keeping the intrusion sensor enabled while Keep Climate On,
Dog, or Camp is active can trigger an alarm event as a result of air movement inside the cabin.
WARNING: Never leave a child unattended in your vehicle.
WARNING: Check local laws for any restrictions on leaving pets unattended in your vehicle.
WARNING: You are responsible for the safety of your dog or pet. Never leave them in CybertruckModel SModel XModel
3Model Y for long periods of time. Constantly monitor the vehicle temperature and their well-being. Make sure you have
sufficient cellular coverage on your phone and time to return to the vehicle, if necessary.
WARNING: In the unlikely event that your climate control system needs service or is not working as expected, avoid
using Keep Climate On, Dog, and Camp. Never rely on your vehicle to protect something irreplaceable.
WARNING: You can adjust and monitor the climate control system remotely using the mobile app. However, if you use
the mobile app to turn off the climate control system, Keep Climate On, Dog, and Camp stop operating.
Cabin Overheat Protection
Cabin Overheat Protection prevents the cabin from getting too hot in scorching ambient conditions. While not necessary to
activate whenever you leave CybertruckModel SModel XModel 3Model Y, the climate control system can reduce and maintain
the temperature of your vehicle’s cabin. This can prevent the cabin from getting too hot after leaving it parked in the sun,
making the vehicle more comfortable when you return. Cabin Overheat Protection may take up to 15 minutes to enable once
you exit the vehicle. This feature is intended for passenger comfort and has no impact on the reliability of your vehicle's
components.
To turn on, touch Controls > Safety > Cabin Overheat Protection and choose:
• On: The air conditioning operates when the cabin temperature exceeds 105° F (40° C), or the selected temperature if
available, on the touchscreen or mobile app. Customizing temperatures may require the most recent version of the mobile
app.
• No A/C: Only the fan operates to prevent touch surfaces from getting too hot.
• Off: Disables Cabin Overheat Protection.
You can also enable Cabin Overheat Protection remotely through the mobile app by touching Climate. Swipe up on the bottom
menu and select a setting under Cabin Overheat Protection (see Mobile App on page 355).
Cabin Overheat Protection operates until 12 hours has elapsed once you exit CybertruckModel SModel XModel 3Model Y, or
until the Battery energy drops below 20%, whichever comes first. Using Cabin Overheat Protection requires energy from the
Battery, which may decrease range.
NOTE: To enable Cabin Overheat Protection, Tilt/Intrusion must be turned off.
NOTE: To enable Cabin Overheat Protection, Tilt/Intrusion must be turned off.
WARNING: Due to automatic shut-off, extreme outside conditions, or other potential inability to maintain the selected
temperature, the inside of the vehicle can become dangerously hot, even when Cabin Overheat Protection is enabled. If
you experience temperatures exceeding the selected temperature repeatedly, contact Tesla service.
WARNING: Never leave children or pets in the vehicle unattended. Due to automatic shut-off or extreme outside
conditions, the inside of the vehicle can become dangerously hot, even when Cabin Overheat Protection is enabled.
Climate Control Operating Tips
You can improve the efficiency of the cabin heater by limiting acceleration. This allows the heat pump system to use more
residual heat from the Battery to efficiently heat the cabin while maintaining the chosen acceleration level. This is useful in
cold weather.
• When you use the mobile app to turn on the climate control system, it automatically turns off when the charge level drops
to 20%, or if two hours has passed. To cool or heat the cabin for a longer period of time, charge the vehicle and re-enable
your climate control preference through the mobile app.

680

Owner's Manual

Owners Manual
• You may hear the sound of the climate system inside the cabin of CybertruckModel SModel XModel 3Model Y when
Parked. It makes a low fan noise. The climate system attempts to dry itself out to minimize additional moisture or musty
odors. This is a normal operation and not a cause for concern.
• If your vehicle is equipped with a heat pump (to determine if your vehicle has a heat pump, touch Controls > Software >
Additional Vehicle Information), you can improve the efficiency of the cabin heating by reducing your selected acceleration
mode (see Acceleration Modes on page 496). This allows the heat pump system to take more heat from the Battery to
efficiently heat the cabin, instead of maintaining the Battery's ability to provide peak acceleration performance. This helps
to maximize driving efficiency in colder weather. Note that when subsequently increasing the acceleration mode, the
Battery requires time to warm up before the increased level of acceleration is available.
• You can improve the efficiency of the cabin heating by reducing your selected acceleration mode (see Acceleration Modes
on page 496Acceleration Modes on page 500). This allows the heat pump system to take more heat from the Battery to
efficiently heat the cabin, instead of maintaining the Battery's ability to provide peak acceleration performance. This helps
to maximize driving efficiency in colder weather. Note that when subsequently increasing the acceleration mode, the
Battery requires time to warm up before the increased level of acceleration is available.
• Your charge port latch may freeze in extremely cold weather or icy conditions. In cases where you cannot remove or insert
the charge cable, or your vehicle is not Supercharging due to the latch being frozen in place, enable Defrost Car in the
mobile app. This helps thaw ice on the charge port latch so the charge cable can be removed or inserted. See Cold Weather
Best Practices on page 695 for more information.
• To conserve energy, turn on Range Mode to limit the power of the climate control system (touch Controls > Pedals &
Steering > Range Mode). Cabin heating and cooling may be less effective, but you can use seat heaters to provide warmth
in colder climates.
• If the climate control system is louder than you prefer, manually reduce the fan speed.
• In addition to cooling the interior, the air conditioning compressor also cools the Battery. Therefore, in hot weather, the air
conditioning compressor can turn on even if you turned it off. This is normal because the system’s priority is to cool the
Battery to ensure it stays within an optimum temperature range to support longevity and optimum performance.
• Even when not in use, you may hear CybertruckModel SModel XModel 3Model Y emit a whining noise or the sound of
water circulating. These sounds are normal and occur when the internal cooling systems turn on to support various vehicle
functions, such as maintaining the low voltage battery and balancing the temperature of the high voltage Battery.
• To ensure the climate control system operates efficiently, close all windows and ensure that the exterior grille in front of the
windshield is free of ice, snow, leaves, and other debris.
• In very humid conditions, it is normal for the windshield to fog slightly when you first turn on the air conditioning.
• It is normal for a small pool of water to form under CybertruckModel SModel XModel 3Model Y when parked. Extra water
produced by the dehumidifying process is drained underneath.
• CybertruckModel SModel XModel 3Model Y is designed to automatically maximize efficiency; therefore, your air
conditioning compressor and external fan may run and make noise even when the outside temperature is cold and your
vehicle is heating or supercharging.
• CybertruckModel SModel XModel 3Model Y is designed to automatically maximize efficiency; therefore, your air
conditioning compressor and external fan may run and make noise even when the outside temperature is cold and your
vehicle is heating or supercharging.
• To reduce the temperature in the cabin in hot weather conditions, the fan may turn on to vent the cabin when the vehicle is
parked. This occurs only if the battery's charge level is above 20%.

Owner's Manual

681

Owners Manual
Vents
Outside air is drawn into CybertruckModel SModel XModel 3Model Y through the grill in front of the windshield. Keep the grill
clear of obstructions such as leaves and snow.
To direct the flow of air inside CybertruckModel SModel XModel 3Model Y, move the interior vents up, down, or from side to
side.

NOTE: You can direct the outer face level vents toward the side windows to help defrost or defog them.
Cabin Air Filter(s)
CybertruckModel SModel XModel 3Model Y has one or more air filters to prevent pollen, industrial fallout, road dust and other
particles from entering through the vents.
NOTE: Cabin air filter(s) require periodic replacement. See Service Intervals on page 752.

682

Owner's Manual

Owners Manual
Ventilation
Adjusting the Front Vents
CybertruckModel SModel XModel 3Model Y has a unique horizontal face-level vent that spans the width of the dashboard.
Using the touchscreen, you can pinpoint exactly where you want to direct the air flowing from this vent when heating or
cooling the front cabin area.

1. Driver vent and controls
2. Passenger vent and controls
When the face-level vent is on you can adjust the direction of the air flow from each vent. To adjust the direction of the air
flow, simply touch the radiating air waves from the corresponding vent on the touchscreen. The air flows in a single stream
when centered or splits into mirrored air streams when air is directed outward or inward from the center of the vent.
When CybertruckModel SModel XModel 3Model Y detects that there are no passengers sitting in the passenger seat, the
passenger vent and controls automatically turn off. Adjust the climate settings to enable passenger air flow.
NOTE: You can direct the face-level vents toward the windows to help defrost or defog them.
NOTE: When you split a vent into two separate air flows, the air flow in each direction is not as strong as when all air is flowing
in a single direction.
NOTE: Outside air is drawn into CybertruckModel SModel XModel 3Model Y through the grill in front of the windshield. Keep
the grill clear of obstructions, such as leaves and snow.
Adjusting the Rear Vents
CybertruckModel SModel XModel 3Model Y has vents located at the back of the center console where air flows from when
the setting is turned on from the touchscreen. To direct the flow of air in the rear cabin area, adjust the vents at the rear of the
center console up, down, or from side to side as necessary.

Owner's Manual

683

Owners Manual

Cabin Air Filter(s)
CybertruckModel SModel XModel 3Model Y has one or more air filters to prevent pollen, industrial fallout, road dust and other
particles from entering through the vents.
NOTE: Cabin air filter(s) require periodic replacement. See Service Intervals on page 752.

684

Owner's Manual

Owners Manual
Ventilation
Adjusting the Front Vents
CybertruckModel SModel XModel 3Model Y has a unique horizontal face-level vent that spans the width of the dashboard.
Using the touchscreen, you can pinpoint exactly where you want to direct the air flowing from this vent when heating or
cooling the front cabin area.

1. Driver vent and controls
2. Passenger vent and controls
When the face-level vent is on you can adjust the direction of the air flow from each vent. To adjust the direction of the air
flow, simply touch the radiating air waves from the corresponding vent on the touchscreen. The air flows in a single stream
when centered or splits into mirrored air streams when air is directed outward or inward from the center of the vent.
When CybertruckModel SModel XModel 3Model Y detects that there are no passengers sitting in the passenger seat, the
passenger vent and controls automatically turn off. Adjust the climate settings to enable passenger air flow.
NOTE: You can direct the face-level vents toward the windows to help defrost or defog them.
NOTE: When you split a vent into two separate air flows, the air flow in each direction is not as strong as when all air is flowing
in a single direction.
NOTE: Outside air is drawn into CybertruckModel SModel XModel 3Model Y through the grill in front of the windshield. Keep
the grill clear of obstructions, such as leaves and snow.
Adjusting the Rear Vents
CybertruckModel SModel XModel 3Model Y has vents located at the back of the center console where air flows from when
the setting is turned on from the touchscreen. To direct the flow of air in the rear cabin area, adjust the vents at the rear of the
center console up, down, or from side to side as necessary.

Owner's Manual

685

Owners Manual

Cabin Air Filter(s)
CybertruckModel SModel XModel 3Model Y has one or more air filters to prevent pollen, industrial fallout, road dust and other
particles from entering through the vents.
NOTE: Cabin air filter(s) require periodic replacement. See Service Intervals on page 752.

686

Owner's Manual

Owners Manual
Adjusting the Front and Rear Vents
CybertruckModel SModel XModel 3Model Y has a unique horizontal face-level vent that spans the width of the dashboard. It
also has vents at the top and bottom of the rear console.It also has vents at the back of the center console for the rear cabin.

Owner's Manual

687

Owners Manual

688

Owner's Manual

Owners Manual

1. Driver vents
2. Driver controls
3. Passenger controls
4. Passenger vents
5. Rear vents
6. Rear controls

Owner's Manual

689

Owners Manual
Using the touchscreens, you can pinpoint exactly where you want to direct the air flowing from this vent when heating or
cooling the cabin. When the face-level vent is on you can adjust the direction of the air flow from each vent. To adjust the
direction of the air flow, touch and drag the radiating air waves from the corresponding vent on the touchscreen. The air flows
in a single stream when centered or splits into mirrored air streams when air is directed outward or inward from the center of
the vent.

NOTE: When you split a vent into two separate air flows, the air flow in each direction is not as strong as when all air is flowing
in a single direction.
NOTE: Outside air is drawn into CybertruckModel SModel XModel 3Model Y through the grill in front of the windshield. Keep
the grill clear of obstructions, such as leaves and snow.
Cabin Air Filter(s)
CybertruckModel SModel XModel 3Model Y has one or more air filters to prevent pollen, industrial fallout, road dust and other
particles from entering through the vents.
NOTE: Cabin air filter(s) require periodic replacement. See Service Intervals on page 752.

690

Owner's Manual

Owners Manual
Adjusting the Front and Rear Vents
CybertruckModel SModel XModel 3Model Y has a unique horizontal face-level vent that spans the width of the dashboard. It
also has vents at the top and bottom of the rear console.It also has vents at the back of the center console for the rear cabin.

Owner's Manual

691

Owners Manual

692

Owner's Manual

Owners Manual

1. Driver vents
2. Driver controls
3. Passenger controls
4. Passenger vents
5. Rear vents
6. Rear controls

Owner's Manual

693

Owners Manual
Using the touchscreens, you can pinpoint exactly where you want to direct the air flowing from this vent when heating or
cooling the cabin. When the face-level vent is on you can adjust the direction of the air flow from each vent. To adjust the
direction of the air flow, touch and drag the radiating air waves from the corresponding vent on the touchscreen. The air flows
in a single stream when centered or splits into mirrored air streams when air is directed outward or inward from the center of
the vent.

NOTE: When you split a vent into two separate air flows, the air flow in each direction is not as strong as when all air is flowing
in a single direction.
NOTE: Outside air is drawn into CybertruckModel SModel XModel 3Model Y through the grill in front of the windshield. Keep
the grill clear of obstructions, such as leaves and snow.
Cabin Air Filter(s)
CybertruckModel SModel XModel 3Model Y has one or more air filters to prevent pollen, industrial fallout, road dust and other
particles from entering through the vents.
NOTE: Cabin air filter(s) require periodic replacement. See Service Intervals on page 752.

694

Owner's Manual

Owners Manual
Cold Weather Best Practices
To ensure that CybertruckModel SModel XModel 3Model Y provides you with the best ownership experience possible in harsh
cold weather conditions, follow these best practices.
Before Driving
When snow and ice accumulate on your vehicle, moving parts, such as the door handlesdoors, windows, mirrors, and wipers
the wiper can freeze in place. To achieve maximum range and performance, it is helpful to warm the cabin and Battery before
driving. There are several ways to do so:
• Touch Controls > Schedule (also available on both the charging and climate control screens) to set a time when you want
your vehicle to be ready to drive (see Scheduled Precondition and Charge on page 745).
• In the mobile app, navigate to Climate to customize the temperature at which you want to heat the cabin. This also warms
the high voltage Battery as needed.
• In the mobile app, navigate to Climate > Defrost Car > Defrost to melt snow, ice, and frost on the windshield, charge port,
charge port (if equipped), windows, and mirrors. This also warms the high voltage Battery as needed.
NOTE: Tesla recommends activating climate settings at least 30-45 minutes before departure (see Operating Climate
Controls on page 670Operating Climate Controls on page 1341). Preconditioning times depend on outside temperature
and other factors. The mobile app will notify you once your vehicle has reached the desired preconditioning temperature.
Charge Port

If your charge port latch freezes in place and a charging cable becomes stuck in the charge port, try manually releasing the
charge cable. See Manually Releasing Charge Cable on page 739Manually Releasing Charge Cable on page 742Manually
Releasing Charge Cable on page 739Manually Releasing Charge Cable on page 1379.
In extremely cold weather or icy conditions, it is possible that your charge port latch may freeze in place. In these weather
conditions, on some vehicles, you can thaw ice on the charge port latch so the charge cable can be removed and inserted. To
do so, enable Defrost Car using the mobile app.
In extremely cold weather or icy conditions, it is possible that your charge port latch may freeze in place. In cases where you
cannot remove or insert the charge cable, or the vehicle is not Supercharging due to the latch being frozen in place, use the
Defrost Car setting in the mobile app. This can help thaw ice on the charge port latch so the charge cable can be removed or
inserted.
You can also prevent the occurrence of a charge port latch freezing in place by using the Schedule settings (see Scheduled
Precondition and Charge on page 745).
NOTE: If your charge port latch is frozen in place, it may not lock the charging cable in place when inserted, but it can still
charge at a slow AC rate even if the latch is not engaged.
Charging

By using Trip Planner (if available) to navigate to a Tesla charging location, CybertruckModel SModel XModel 3Model Y preheats the high voltage Battery to ensure when you arrive at the charger, the temperature of the Battery is optimal and ready to
charge. This reduces the amount of time it takes to charge. See (see Trip Planner on page 708).
NOTE: Tesla recommends using Trip Planner to navigate to a charging location for at least 30-45 minutes before arrival to
ensure optimal Battery temperature and charging conditions. If the drive to the charging location is less than 30-45 minutes,
consider preconditioning the Battery before driving (see Before Driving on page 695).
NOTE: The thermal system may produce steam under certain conditions for vehicles equipped with a heat pump (to determine
if your vehicle has a heat pump, touch Controls > Software > Additional Vehicle Information). For example, odorless steam can
come from the front of your vehicle while charging at a Supercharger in cold temperature. This is normal and not a cause for
concern.
Windows

In the mobile app, go to Climate and select Defrost CarDefrost Truck, which helps melt snow, ice, and frost on the windshield,
windows, and mirrors.

Owner's Manual

695

Owners Manual
In cold temperatures, CybertruckModel SModel XModel 3Model Y automatically makes a slight adjustment to the position of
the windows to make it easier to open doors.
NOTE: Always connect to an external, low voltage power supply before opening a door when the vehicle has no power to avoid
breaking a window.
Use the mobile app to schedule a service appointment for Tesla to provide hydrophobic coating to the side and rear windows
(not the front windshield) for a nominal fee.
Doors

In severe winter conditions, ice buildup can make it more difficult to open door handles. You can use the mobile app to pop
open the driver door in this situation.
1. In the mobile app, touch and hold any of the four quick control buttons and follow the instructions to customize quick
controls with Unlatch Door.
2. When you are next to your car, touch Unlatch Door to pop open the driver door.
Removing Ice From Door Handle

In severe winter conditions, ice buildup within the door handle can prevent the door handle from opening. The process for
freeing a CybertruckModel SModel XModel 3Model Y door handle is slightly different than others to remove ice buildup.
NOTE: Preemptively applying WD-40 to the door handle pivot pins can help prevent ice buildup inside your door handle.
CAUTION: Do not attempt to use tools or excessive force to release the door handle from ice buildup.
If your vehicle's door handles are black: Perform the following to remove ice from the door handle:

1. Forcefully press the frontmost part of the door handle. It will rock slightly inward to help break the ice.

696

Owner's Manual

Owners Manual

2. Press the rearmost part of the door handle to try to open as you normally would.
3. Once the door handle is able to move, open and close it a few more times to release any remaining ice buildup. Make sure
the door handle is fully pressed in (retracted) prior to entering the vehicle, and check that the door is fully closed before
driving away.
If your vehicle's door handles are silver: You can usually remove the ice with a few forceful bumps to the door handle using the
bottom of your fist. Perform the following to remove ice from the door handle:
CAUTION: Remove any jewelry or objects that can damage the paint prior to performing the procedure, and do not
attempt to use tools or excessive force.

1. Forcefully press the rearmost part of the door handle to try to open the door handle.
2. Working in a circular pattern around the perimeter of the door handle, use the bottom of your fist to forcefully bump the
door handle to break and release the ice buildup.