NHTSA ID Number: 11005739
Manufacturer Communication Number: 2024.26.3_SX_0724.pdf
TSB/Document Date: 2024-08-06
Summary
Tesla
does not provide physical owner's manual copies. Instead, all available owner’s manual content is integrated into the vehicle software, and only the content relevant for a given vehicle, based on vehicle configuration and software version installed, is displayed on its touchscreen. This file contains all available owner’s manual content for the vehicle converted to PDF format, and given the distribution method and NHTSA’s submission format requirements, it is the best available representative copy of owner’s manual content. However, a customer who accesses the owner’s manual via their vehicle’s touchscreen would only see the parts of this PDF file that are relevant to their vehicle.
and do not seat a child in the front passenger seating position.
To make sure the sensing system can correctly detect occupancy status, eliminate the following:
• Objects lodged under the seat.
• Heavy objects sitting on the seat (briefcase, large purse).
• Objects wedged between the seat back and seat cushion.
• Cargo interfering with the seat.
• Aftermarket items attached to, or sitting on or between, the seat and occupant including but not limited to covers, mats,
blankets, etc.
These conditions can interfere with the occupancy sensor. If you have eliminated the above possibilities, and the airbag status
is still incorrect, ask passengers to ride in the rear seats and schedule a service appointment to have the airbag system
checked.
NOTE: The front passenger occupancy sensor affects the operation of the passenger front airbags only. The side airbags are
not affected.
WARNING: If the front passenger airbag is not turning on or off as expected based on the weight thresholds previously
described, schedule a service appointment immediately.
WARNING: If seating a child in the front passenger seat is legally permissible in your market region, it is the driver's
responsibility to ensure that the passenger front airbag is OFF. Never seat a child in a rear facing safety seat in the front
passenger seat with an active airbag. DEATH or SERIOUS INJURY to the child can occur. Per recommendations by the
National Highway Traffic Safety Administration, all occupants age 12 and under must ride in the rear seats.
Owner's Manual
707
Seating and Safety Restraints
WARNING: Do not use seat covers on the front seats. Doing so could reduce the accuracy of the occupant detection
system.
708
Owner's Manual
Seating and Safety Restraints
Ensuring Accurate Occupant Detection
To help ensure an occupant in the front passenger seat can be accurately detected, the passenger must:
• Wear a seat belt.
• Sit upright on the center of the seat cushion, with shoulders resting against the seat back and legs extended comfortably in
front with feet on the floor. See Examples of Correct and Incorrect Seating Positions on page 710.
• Remain positioned on the seat cushion and not lift their weight off the seat (for example, by pushing their feet against the
floor or pressing on the center console or armrest to lift up).
• Never wear thick, wet, or bulky clothing (such as ski wear or padded clothing).
In addition to the items listed above, the following situations can interfere with the accuracy of the occupant classification
system:
• Incorrectly placing a child restraint system so that the entire lower section is not positioned against the seat cushion.
• Objects lodged under the seat or wedged between the seat back and cushion.
• Heavy objects sitting on the seat (briefcase, large purse).
• Cargo interfering with the seat.
These conditions can interfere with the occupancy sensor. If you have eliminated the above possibilities, and the airbag status
is still incorrect, instruct passengers to ride in the rear seats and schedule a service appointment to have the airbag system
checked.
NOTE: Tesla
follows NHTSA (National Highway Traffic Safety Administration) recommendations that all occupants age 12 and
under be seated in a rear seat.
NOTE: The front passenger occupancy sensor affects the operation of the passenger front and side airbags.
WARNING: Failure to follow the above instructions can adversely affect the Occupant Classification System (OCS)
which can cause serious injury or death.
WARNING: If the front passenger airbag is not turning on or off as expected, do not seat a passenger in the front
passenger seat. Schedule a service appointment.
WARNING: To ensure accuracy of the occupant detection system, do not make any modifications to the front passenger
seat.
Owner's Manual
709
Seating and Safety Restraints
Examples of Correct and Incorrect Seating Positions
Correct seating position:
Incorrect seating position - the passenger's feet must be on the floor:
Incorrect seating position - the passenger must not slide forward on the seat cushion:
710
Owner's Manual
Seating and Safety Restraints
Incorrect seating position - the passenger must not recline the backrest to a laying down position when the vehicle is moving:
Owner's Manual
711
Seating and Safety Restraints
Inflation Effects
WARNING: When airbags inflate, a fine powder is released. This powder can irritate the skin and should be thoroughly
flushed from the eyes and from any cuts or abrasions.
After inflation, the airbags deflate to provide a gradual cushioning effect for the occupants and to ensure the driver’s forward
vision is not obscured.
If airbags have inflated, or if your vehicle has been in a collision, always have the airbags, seat belt pre-tensioners and any
associated components checked and, if necessary, replaced.
In a collision, in addition to the airbags inflating:
• Doors unlock.
• Hazard warning lights turn on.
• Interior lights turn on.
• High voltage is disabled (you must contact Roadside Assistance to restore high voltage power).
• Seat belt pre-tensioners retract the seat belt anchor and seat belt webbing.
NOTE: Depending on the nature of the impact and the forces involved, doors may not unlock in a collision and/or damage may
prevent them from opening. In such cases, the door may need to be opened using the interior manual release, or other means
of extrication (for example, exiting through another door, breaking the window, etc.).
Airbag Warnings
WARNING: Do not place objects over or near airbags because any such objects could cause harm if the vehicle is in a
crash severe enough to cause the airbag to inflate.
WARNING: All occupants, including the driver, should always wear their seat belts, whether or not an airbag is also
provided at their seating position, to minimize the risk of severe injury or death in the event of a collision.
WARNING: Front seat occupants should not place their arms over the airbag module, as an inflating airbag can cause
fractures or other injuries.
WARNING: Airbags inflate with considerable speed and force, which can cause injury. To limit injuries, ensure that
occupants are wearing seat belts and are correctly seated, with the seat positioned as far back as possible. The National
Highway Traffic Safety Administration (NHTSA) recommends a minimum distance of 10 inches (25 cm) between an
occupant’s chest and an airbag.
WARNING: Children should not be seated on the front passenger seat unless permitted by regulations in your market
region. Follow all regulations in your region for the appropriate way to seat a child based on the child's weight, size, and
age. The safest place to seat infants and young children is in a rear seating position. Seating an infant or child in a rearfacing child restraint system on a seat equipped with an operational airbag can cause serious injury or death.
WARNING: To ensure correct inflation of the side airbags, maintain an unobstructed gap between an occupant’s torso
and the side of Model SModel X.
WARNING: Passengers shouldn't lean their heads against doors. Doing so can cause injury if a curtain airbag inflates.
WARNING: Do not allow passengers to obstruct the operation of an airbag by placing feet, knees or any other part of the
body on or near an airbag.
WARNING: Do not attach or place objects on or near the front airbags, the side of the front seats, the headliner at the
side of the vehicle, or any other airbag cover that could interfere with inflation of an airbag. These include but are not
limited to: steering wheel covers, decals, seat cushions or pillows, etc. Objects can cause serious injury if the vehicle is
in a collision severe enough to cause the airbag to inflate.
WARNING: Do not use seat covers on the front seats. Doing so could restrict deployment of the seat-mounted airbags if
a collision occurs.
WARNING: Following inflation, some airbag components are hot. Do not touch until they have cooled.
712
Owner's Manual
Storage Areas
Interior Storage
Center Console
In addition to housing wireless phone chargers, USB-C outlets, and a 120V power outlet (see Interior Electronics on page
660), the center console includes cup holders, a storage compartment, and a rear touchscreen.
To open the main storage compartment, squeeze the latch and pivot the cover upward. To close, lower the cover and make
sure it latches shut.
Rear Console
Model SModel X has a rear console integrated in the center of the second row. This console can serve as an arm rest for rear
passengers and includes two cup holders.
To lower the console, pull the loop in the seat back and pull down the center seat head rest. The loop must be fully retracted
back into place in order to lock the arm rest in the lowered or raised positions.
Owner's Manual
713
Storage Areas
To raise the console, push the head rest all the way upward until the console securely latches into place.
Rear Seat Storage
To maximize cargo space in the second row, the seat cushions can be folded upwards. The rear seat is split into two sections.
While pulling the tab on the inside of the rear door, pull the front of the seat upwards until you hear a click.
To put the seats down again, pull the tab while pressing down on the corresponding seat cushion.
WARNING: When folding the rear seat cushion up, ensure that the area is clear of objects and hands and that they are
fully locked into place before driving. When folding the rear seat cushions down, ensure that they are fully folded down
and locked into place before a passenger sits down.
714
Owner's Manual
Storage Areas
Glovebox
To open the glovebox, touch Controls > Glovebox. The glovebox opens and the light turns on. You can also open the glovebox
with a voice command (see Voice Commands on page 391).
To close the glovebox, touch Glovebox again.
For additional glovebox security, touch Controls > Safety > Glovebox PIN to set a 4-digit PIN that must be re-entered to open
the glovebox (see Glovebox PIN on page 394).
NOTE: If you leave the glovebox open, its light eventually turns off.
NOTE: The glovebox locks whenever closed and you lock Model SModel X using the mobile app, key card, you leave
Model SModel X carrying your phone key (if Walk-Away Door Lock is turned on), or if Valet Mode is active (see Valet Mode on
page 183). It does not lock when Model SModel X is locked by touching the lock icon on the touchscreen.
WARNING: When driving, keep the glovebox closed to prevent injury to a passenger if a collision or sudden stop occurs.
Seat Pockets
A pocket on the back side of each front seat provides convenient storage for small items. Avoid placing sharp objects in the
seat pockets to prevent tears.
Door Panels
There is additional storage for small items on the inside of each front and rear door panel.
NOTE: In the unlikely event that Model SModel X has no low voltage power, a rear door manual release is located in each rear
door pocket. For more information, see Opening Doors with No Power on page 950.
Coat Hangers
Your Model SModel X has a coat hanger on each side of the vehicle above the rear window in the second row, next to the
reading light. Push the coat hanger to release it. Push it again to retract it.
Owner's Manual
715
Storage Areas
716
Owner's Manual
Storage Areas
Powered Frunk
Opening
WARNING: Before opening or closing the hood, it is important to check that the area around the hood is free of
obstacles (people and objects). Failure to do so may result in damage or serious injury.
WARNING: Use caution around the panel edges on Model SModel X, including the doors, powered frunk, tailgate, and
surrounding panels.
To open the powered frunk, ensure Model SModel X is in Park, and then do one of the following before opening the hood:
• Touch the associated Open icon on the touchscreen.
• Press the Frunk button in the mobile app.
• Press the center button under the hood closure.
NOTE: In the unlikely event that Model SModel X has no low voltage power, you will be unable to open the powered frunk using
the touchscreen or the button under the hood closure. Instead, see Opening the Powered Frunk with No Power on page 944.
Owner's Manual
717
Storage Areas
When a door or the powered frunk is open, the touchscreen displays the Door Open indicator light. The vehicle
avatar also shows the door, powered frunk, or tailgate status.
Adjust the Opening Height of the Powered Frunk
You can adjust the opening height of the powered frunk to make it easier to reach or to avoid low-hanging ceilings or objects
(for example, a garage door or light):
1. Open the powered frunk, then manually lower or raise it to the desired opening height.
2. Press and hold the powered frunk button on the front of the vehicle for three seconds until you hear a confirmation chime.
3. Confirm that you have set it to the desired height by closing the powered frunk, then reopening it.
Closing
WARNING: Before driving, you must ensure that the hood is securely latched in the fully closed position by carefully
trying to lift the front edge of the hood upward and confirming there is no movement. It is the driver's responsibility to
ensure that the powered frunk is properly closed before driving.
Close the powered frunk in any of the following ways:
• Press the center button under the hood closure.
• Press the emergency release button in the powered frunk.
• Press the Frunk button in the mobile app.
• Touch the associated Close icon on the touchscreen.
WARNING: Ensure that all hands and other objects are free of the powered frunk before closing it.
CAUTION: Do not try to manually close the powered frunk. Doing so may cause damage.
If the powered frunk is left open when you attempt to shift out of Park, a notification requiring you to confirm your intent to
drive appears on the touchscreen. If you choose to keep the powered frunk open while driving, your vehicle speed is limited.
The powered frunk locks when:
• You lock Model SModel X using the touchscreen, key or mobile app.
718
Owner's Manual
Storage Areas
• You leave Model SModel X carrying your phone key (if Walk-Away Door Lock on page 55Walk-Away Door Lock on page 41
is turned on).
• Valet mode is active (see Valet Mode on page 183).
Load Limits
CAUTION: Never load more than 440 lbs (200 kg) in the powered frunk. Doing so can cause damage.
WARNING: When loading cargo, always consider the vehicle's GVWR and GAWR ratings (see Vehicle Loading on page
928). The GVWR is the maximum allowable total mass of the vehicle including all passengers, fluids, and cargo, and the
GAWR is the maximum allowable total mass permitted on an axle.
Interior Emergency Release
An illuminated interior release button inside the powered frunk allows a person locked inside to get out.
Press the interior release button to unlatch the powered frunk, then push up on the hood. If the powered frunk is already open,
pressing the interior release button closes it.
NOTE: The interior release button glows following a brief exposure to ambient light.
WARNING: People should never climb inside the powered frunk. Never shut the powered frunk when a person is inside.
WARNING: Care should be taken to ensure that objects inside the powered frunk do not bump against the release
button, causing the hood to accidentally open.
Owner's Manual
719
Storage Areas
Cargo Bed
Overview
WARNING: Passengers must always be seated in seats with seat belts fastened at all times when the vehicle is in motion.
Never allow passengers or pets to ride in the cargo bed, even with the tonneau cover closed. Doing so can result in
serious injury or death.
1. Tonneau cover (Accessing the Cargo Bed on page 721)
2. LED light bars (Lights on page 756)
3. Tailgate and tonneau cover switches (Accessing the Cargo Bed on page 721)
4. Charge port manual release (Manually Releasing Charge Cable on page 877)
5. Power outlets (Cargo Bed Outlets on page 664)
6. Tailgate emergency release (Tailgate Emergency Release on page 723)
7. L-tracks (Securing Cargo on page 724)
8. Front tie-downs (Securing Cargo on page 724)
9. Attachment points (Securing Cargo on page 724)
10. Rear tie-downs (Securing Cargo on page 724)
11. Sealed storage (Under Bed Compartment on page 724)
For dimensions, weight capacities, and storage volumes of the cargo bed and its associated components, see Dimensions,
Weights, and Cargo Capacity on page 932.
720
Owner's Manual
Storage Areas
CAUTION: Although the tonneau cover protects contents from the majority of water during rain, snow, etc., it does not
make the cargo bed waterproof. Water ingress and/or condensation can occur. Therefore, do not store items that can be
damaged by water under the tonneau cover. Store water-sensitive items in the cab, the Under Bed Compartment on
page 724, or the Powered Frunk on page 717.
WARNING: Never fill, store, or transport volatile solvents, chemicals, or liquids anywhere in the cargo bed or the under
bed compartment. Doing so can cause spills, or allow fumes to accumulate, resulting in damage, serious injury, or death.
Accessing the Cargo Bed
When Model SModel X is parked, use these exterior switches to access the cargo bed:
1. Tonneau Open - Fully press and release to fully open the tonneau cover. Press a second time to pause the cover. To open
the tonneau cover partially, press lightly and release the button when desired.
2. Tonneau Close - Fully press and release to fully close the tonneau cover. Press a second time to pause the cover. To close
the tonneau cover partially, press lightly and release when desired.
3. Tailgate Open - Press to release the tailgate latch. The tailgate drops but integrated struts prevent it from falling forcefully.
NOTE: If the tonneau cover does not open or close when you fully press and release the tonneau open or tonneau close button,
respectively, you may need to calibrate the tonneau cover. For more information, see Troubleshooting the Tonneau Cover on
page 722. You can still press lightly to partially open or close the tonneau cover.
You can also use the mobile app and the touchscreen to open and close the tonneau cover. On the touchscreen, touch
Controls > Tonneau.
CAUTION: Do not drop anything onto the tonneau cover or place objects on top that could fall off. Avoid allowing objects
or debris to enter the tracks or interfere with the motors.
To close the tailgate, first remove all objects and ensure the hinge area is free of debris. Then lift the tailgate from the bottom
with both hands and press it firmly against the cargo bed to ensure it latches into position. Pull the closed tailgate toward you
to ensure it is fully latched into position. If the tailgate is open or unlatched, the touchscreen displays a message.
Owner's Manual
721
Storage Areas
WARNING: When closing the tonneau cover, keep hands and objects away from the tonneau cover tracks. Failure to do
so can cause damage or injury.
WARNING: When closing the tailgate, keep hands and objects away from the perimeter, the hinges, etc. Failure to do so
can cause damage or serious injury.
Troubleshooting the Tonneau Cover
The tonneau cover does not open or close when:
• Model SModel X is locked, or is not in Park.
• There is an obstacle blocking the tonneau cover from closing. In this case, remove the object and try again.
WARNING: Although the tonneau cover is designed to stop moving if it detects an obstacle when closing, do not rely
on the tonneau cover to prevent damage or injury.
• Model SModel X has no low voltage power. In this case, it is necessary to open the powered frunk before attempting to
jump start Model SModel X. For more information, see If Vehicle Has No Power on page 939.
NOTE: The tonneau cover locks into place (whether opened or closed) when Walk-Away Door Lock is enabled. Always double
check that the tonneau cover is closed, or intentionally left open, before walking away from your vehicle (see Walk-Away Door
Lock on page 680 for more information). Car Left Open Notifications may not notify you if the tonneau cover is left open.
If the tonneau cover does not open or close as expected:
1. Make sure that Model SModel X is unlocked and in Park.
2. Wait several minutes and then try again.
3. Inspect the tracks to ensure there's no debris or object in the way of the tonneau cover.
722
Owner's Manual
Storage Areas
4. Calibrate the tonneau cover:
◦ Touch Calibrate on the touchscreen (on the exterior view of the vehicle, where you would normally touch to open or
close the tonneau cover) and follow the onscreen instructions.
NOTE: The Calibrate option only appears on the touchscreen when the tonneau cover needs to be calibrated.
◦ Or, to calibrate the tonneau cover manually: Press and hold the Open button (1) until the cover is fully open and wait for
it to stall. Then, press and hold the Close button (2) until the cover is fully closed and stalled.
If the tonneau cover still does not function as expected, schedule a Service appointment.
Tailgate Emergency Release
An interior release, located on the inside of the tailgate, allows a person trapped in the cargo bed to open the tailgate when
Model SModel X is parked.
To use the emergency release, flip the cover upward to access the pull strap, then pull the strap firmly toward you.
WARNING: People should never be inside the cargo bed when the Model SModel X is moving. Never shut the tailgate
when a person is inside.
Owner's Manual
723
Storage Areas
Under Bed Compartment
The cargo bed features a sealed storage compartment. To open:
1. Open the tailgate (see Accessing the Cargo Bed on page 721).
2. Grasp the handle and flip the cover fully upward.
Once open, integrated struts hold the cover in the raised position.
The under bed compartment features a drain plug that allows you to use it to store water and/or ice. To open the drain plug,
simply turn it counter-clockwise and pull it up. Remember to re-install the drain plug once the compartment is fully drained.
To close the under bed compartment, push it fully downward until the latch engages.
CAUTION: Take care when closing the lid to the under bed storage compartment. Slamming the lid shut may cause
damage or injury.
CAUTION: Do not load more than 220 lb (100 kg) in the under bed compartment. Doing so can cause damage.
Securing Cargo
Model SModel X features multiple options that make it easy to secure cargo:
• Two integrated L-track rails, running lengthwise along the top of each side of the cargo bed are compatible with standard
fittings (not included) and provide multiple anchoring options.
724
Owner's Manual
Storage Areas
• Four tie-down anchors - one at each bottom corner of the cargo bed.
CAUTION: Do not use the tie-down anchors or L-tracks for towing. They are intended to secure cargo such as a
spare tire. See Towing a Trailer on page 784 for more information.
CAUTION: The maximum force between any two anchor points must not exceed 707 lb (320 kg). Doing so may cause
damage.
• Eight attachment anchor points, four distributed on each side above the cab and on the rails of the cargo bed. These
anchor points are designed to accommodate accessory racks. To access the anchor points, press down on the inboard side
of the covers to pivot them to their open position. To close the covers, carefully pull the cover down towards the outboard
side of the vehicle until they are flush with the vehicle trim.
Owner's Manual
725
Storage Areas
WARNING: Before driving while carrying objects in the cargo bed, always ensure the cargo is evenly distributed and
adequately secured to prevent it from shifting or falling onto a roadway. Failure to do so can compromise vehicle
stability, damage the cargo bed, and cause serious personal injury or death to passengers and other road users.
726
Owner's Manual
Connectivity
Mobile App
The Tesla
mobile app allows you to communicate with Model SModel X remotely using your iPhone® or Android™ phone.
NOTE: The information below may not represent an exhaustive list of the functions available on the Tesla
mobile app. To ensure
access to new and improved features, download updated versions of the mobile app as they become available.
To Use the Mobile App
To set up the Tesla
mobile app to communicate with your Model SModel X:
1. Download the Tesla mobile app to your phone.
2. Log in to the Tesla mobile app by entering your Tesla account credentials.
3. Enable mobile access to your Model SModel X by touching Controls > Safety > Mobile Access (see Controls on page 348).
Your phone and vehicle must both be actively connected to cellular service to allow the mobile app to communicate with your
vehicle. Tesla recommends that you always have a functional physical key readily available if parking in an area with limited or
absent cellular service, such as an indoor parking garage.
NOTE: In the event that you require lockout assistance from Tesla due to a non-warranty issue, such as having limited cellular
connectivity and having no secondary key available, your expenses are not covered under the Roadside Assistance policy.
NOTE: Tesla does not support the use of third party applications to contact Model SModel X.
Overview
The Tesla mobile app's home screen allows you to:
• See the name of your vehicle (if you have one).
• View your vehicle’s estimated range.
• See which drive mode the vehicle is in (Park, Reverse, Neutral, Drive).
• Lock or unlock your vehicle.
• Enable maximum defrost to warm your vehicle in cold conditions.
• Check your vehicle's charging information and open or close the charge port.
• Open the front trunk.
• View your vehicle’s odometer, VIN, and current firmware version.
Media settings appear on the mobile app to pause, play, rewind, fast forward, and adjust the volume of the media currently
playing in the vehicle.
For supported video sources, send videos to Tesla Theater by sharing the link through the mobile app. Navigate to the movie,
show, or video you want to play on your phone and touch the share button. Share the video with the Tesla app and it appears
on the touchscreen if Model SModel X is in Park.
Profile
In the Profile tab located at the top corner of your phone’s screen (shown as an avatar icon), you can:
• Switch to a different vehicle associated with your Tesla account, if you have access to more than one.
• Navigate the Tesla Shop.
• Access the Tesla inbox.
• Manage your account information and view your order history.
• View and customize notifications you receive under the Settings tab, such as Calendar sync, when your security alarm has
been triggered, charging updates, and new software updates. You can start updates from afar and check its progress.
Owner's Manual
727
Connectivity
Phone Key
Set up your phone as the key (as described in Phone Key on page 20). Once authenticated, your phone's Bluetooth signal is
detected as you approach your vehicle and the doors unlock when you press a door handle. Likewise, when you exit and walk
away with the phone, doors automatically lock (provided the Walk-Away Door Lock feature is turned on, as described in WalkAway Door Lock on page 41). You must be near your vehicle and have a key card ready to set up your phone as a phone key.
NOTE: Always carry a key card or key fob as a backup key, in case your phone loses power or you misplace your phone.
Controls
The Controls tab allows you to do the following:
• Open the front or rear trunk.
• Lock or unlock Model SModel X from afar.
• Open or close the charge port.
• Flash the lights or honk the horn to find where Model SModel X is parked.
• Enable Keyless Driving.
NOTE: Keyless Driving can be used when you do not have your key or to bypass PIN to Drive in cases where you forgot your
PIN or your touchscreen is unresponsive (see PIN to Drive on page 394).
• Open and close your garage door if your vehicle has a programmed HomeLink connection, if available (see HomeLink
Universal Transceiver on page 400).
Climate
You can check the interior temperature and heat or cool the cabin before driving (even if it’s in a garage), control the seat
heaters, and defrost the windshield:
• Enable or disable Defrost Cardefrost which helps melt snow, ice, and frost on the windshield, windows, and mirrors.
• Customizing climate controls allows you to precondition the cabin to your desired temperature and turn on or off the
steering wheelsteering yoke and seat heaters.
• Vent of close the sunroof.Vent the windows.
Using the mobile app to precondition Model SModel X also warms the Battery as needed. The mobile app will notify you once
your vehicle has reached the desired preconditioning temperature.
NOTE: In extremely cold weather or icy conditions, it is possible that your charge port latch may freeze in place. In cases where
you cannot remove or insert the charge cable, or the vehicle is not Supercharging due to the latch being frozen in place, use
your Tesla mobile app to precondition your vehicle on HI for approximately 30-45 minutes (you must use your mobile app to
precondition the vehicle; setting your climate to HI using the touchscreen is not effective). This can help thaw ice on the
charge port latch so the charge cable can be removed or inserted.
NOTE: In extremely cold weather or icy conditions, it is possible that your charge port latch may freeze in place. In cases where
you cannot remove or insert the charge cable, or the vehicle is not Supercharging due to the latch being frozen in place, use
your Tesla mobile app to enable Defrost Car for approximately 30-45 minutes. This can help thaw ice on the charge port latch
so the charge cable can be removed or inserted.
Location
Locate Model SModel X with directions, or track its movement across a map.
Summon
You can park or retrieve Model SModel X using Summon (see Summon on page 330) or Smart Summon (see Smart Summon
on page 333).
728
Owner's Manual
Connectivity
Security
The Security tab allows you to do the following:
• Pair your phone to the vehicle (see Phone Key on page 20).
• Enable or disable Sentry Mode (see Using Sentry Mode on page 397).
• Enable or disable Valet Mode (see Valet Mode on page 183).
• Enable or disable Speed Limit Mode and receive notifications when the vehicle's driving speed is within approximately 3
mph (5 km/h) of your selected maximum speed (see Safety on page 356).
Upgrades
View and purchase the latest upgrades available for your vehicle, such as full self-driving.
Service
See Schedule Service on page 429 for information on how to schedule service through the mobile app.
Roadside
View roadside resources and request roadside assistance (where applicable). For more information on Roadside Assistance,
see Contacting Tesla Roadside Assistance on page 502.
Granting Access to a Second Driver
Add and remove access permission for an additional driver from the Tesla mobile app.
NOTE: Tesla mobile app version 4.3.1 or higher is required. Additional drivers can either use a previously registered Tesla
Account or use the app to create a new Tesla Account.
To add an additional driver, in the Tesla mobile app from the vehicle home screen, go to Security > Add Driver and follow the
onscreen instructions.
NOTE: The additional driver has access to all app features except purchasing upgrades.
To remove access, use the mobile app and go to Security > Manage Drivers and follow the onscreen instructions.
Owner's Manual
729
Connectivity
Connecting to Wi-Fi
Wi-Fi is available as a data connection method and is often faster than cellular data networks. Connecting to Wi-Fi is
especially useful in areas with limited or no cellular connectivity. To ensure fast, reliable delivery of software and map updates,
Tesla recommends leaving Model SModel X connected to a Wi-Fi network whenever possible (for example, when parked
overnight).
To connect to a Wi-Fi network:
1. Touch Controls > Wi-Fi icon at the top of the touchscreenControls screen. Model SModel X begins to scan and display
detected Wi-Fi networks that are within range.
NOTE: If a known Wi-Fi network does not appear in the list, move Model SModel X closer to the access point or consider
using a range extender.
2. Select the Wi-Fi network you want to use, enter the password (if necessary), then touch Confirm.
3. Model SModel X connects to the Wi-Fi network. Whenever the network is within range, Model SModel X connects to it
automatically.
You can also connect to a hidden network that isn't shown on the list of scanned networks. Just touch Wi-Fi Settings, enter the
name of the network in the resulting dialog box, select the security setting, then touch Add Network.
NOTE: If more than one previously connected network is within range, Model SModel X connects to the one most recently
used.
NOTE: At Tesla Service Centers, Model SModel X automatically connects to the Tesla Service Wi-Fi network.
Hotspots and Connectivity
You can also use a mobile hotspot or your phone's Internet connection via Wi-Fi tethering (subject to fees and restrictions of
your mobile carrier
) to access the internet. To remain connected to Wi-Fi when shifting into Drive or Reverse, choose the
connection from the Wi-Fi settings screen, then touch Remain connected in Drive.
730
Owner's Manual
Connectivity
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: 2024.26.3_SX_0724.pdf
Replacement Service Bulletin Number:
MFR Communication Date: 2024-07-31
MFR Internal Campaign ID/Software Version: 2024.26.3
Communication Type: Over The Air
NHTSA Components: UNKNOWN OR OTHER
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
- Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
- 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
- Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission, ABS, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
- Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCA
Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU c0ding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations - 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCA
AutoAuth: Now supports FCA
SGW module for Chrysler
, for Jeep
, for Dodge
(2018+), for Fiat
(2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Pr0gramming): Allows for Ford
, for Lincoln
, and for Mazda
ECU pr0gramming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order - 39+ Services/Resets/Adaptations/Relearns/Calibrations: XTOOL D7S full system car scanner diagnostic tool tackles 99% of common car issues through its 36+ special functions, including Oil Reset, EPB, SAS, BMS, Throttle Reset, Injector C0ding, ABS Bleed, TPMS Reset, Power Balance, etc and also covers specific-vehicle functions like Crank Sensor Relearn, ABS Initialization, Cylinder Power Balance, Fuel Trim Reset, Idle Relearn etc. This car diagnostic scanner enhances efficiency, making repairs and maintenance hassle-free. Tip: DO NOT for All vehicles, please check compatibility first
- Cost-effective ECU C0ding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMW
, for Benz and offline for BENZ, for MIT, along with PMI functions for Ford
, for Mazda
, and for Lincoln
. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase - OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
- 【✅Compared to BOSSCOMM IF742, IF745 Offers Full-System Diagnostics】The BOSSCOMM IF745 car diagnostic scanner is an upgraded model of IF742. In addition to supporting all OBD2 Code Reader functions and 6 reset options (ABS/EPB/SAS/BMS/Oil/Throttle), it expands diagnostics from 4 systems (Check Engine/ABS/SRS/Transmission) to vehicle All systems, including Steering, Suspension, and Body Electronics. This provides deeper, more comprehensive diagnostic capabilities.
- 【✨10 OBD2 Functions】The BOSSCOMM IF745 scan tool’s DTC Lookup instantly translates fault codes into user-friendly explanations, its I/M Readiness feature streamlines emissions testing with a single tap, and Freeze Frame lets you pinpoint the exact moment of a fault for in-depth root-cause diagnosis. Combined with a live data dashboard and advanced diagnostics (O2S, OBMon, EVAP), it delivers comprehensive insights for confident troubleshooting.
- 【✨Deep Diagnostics for All Vehicle System Modules】Beyond code reading/clearing and ECU information retrieval, our all-in-one data stream feature lets you inspect all current fault codes and their locations across the vehicle’s systems. This vehicle code reader helps you turn off dashboard warning lights and perform a comprehensive self-check of your car at home—no more back-and-forth trips to the repair shop or hefty inspection fees.
- 【✨6 Essential Resets: ABS Bleeding, Oil, EPB, SAS, Throttle, BMS】The BOSSCOMM IF745 obd2 scanner diagnostic tool swiftly purges air from brake lines to restore braking sensitivity, fine-tunes maintenance cycles to eliminate false alerts, resolves parking brake issues with one-click control, recalibrates steering sensors for stability, optimizes engine idling/acceleration for smoother performance, and deeply resets battery systems to extend lifespan and range via precise parameter adjustments.❗NOTE: Does NOT support bidirectional control, coding, or programming.
- 【✨10,000+ Car Models, AutoVIN, 13 Languages】The BOSSCOMM IF745 vehicle scanner diagnostic tool covers 73+ global car brands and offers support in 13 languages, making it perfect for DIYers, auto mechanics, or as a thoughtful gift. With a single-click AutoVIN feature, it instantly retrieves vehicle serial numbers, streamlining diagnostics for users globally. This adaptable tool balances user-friendliness with precision, catering to both personal and professional requirements.✅Unsure about compatibility? Compatibility will vary on vehicles' model and year, pls reach us via 📧 [email protected] 📧 before purchase.
This product presentation was made with AAWP plugin.




