responsibility to maintain correct tire pressures (see Maintaining Tire Pressures on page 758). Over or under-inflated
tires can result in loss of control or tire damage, which can lead to serious injury.
Automatic Reset of TPMS Sensors

After replacing one or more wheels (but not after replacing a tire), the TPMS sensors are relearned to ensure tire pressure
warnings are accurate. TPMS sensors reset automatically within 10 minutes of driving over 15 mph (25 km/h).
WARNING: If your CybertruckModel SModel XModel 3Model Y is equipped with aftermarket tires that differ in size from
those printed on the Tire and Loading Information Label (see Vehicle Loading on page 850), it is the driver's
responsibility to determine the correct tire pressure. Do not drive on public roads when tires are not inflated to the
correct pressure.
WARNING: Do not depend on TPMS sensors to accurately determine pressures and trigger alerts. It is the driver's
responsibility to maintain correct tire pressures (see Maintaining Tire Pressures on page 758). Over or under-inflated
tires can result in loss of control or tire damage, which can lead to serious injury.
Automatic Reset of TPMS Sensors

After replacing one or more wheels (but not after replacing a tire), the TPMS sensors are relearned to ensure tire pressure
warnings are accurate. TPMS sensors reset automatically within two minutes of driving over 15 mph (25 km/h).
WARNING: If your CybertruckModel SModel XModel 3Model Y is equipped with aftermarket tires that differ in size from
those printed on the Tire and Loading Information Label, it is the driver's responsibility to determine the correct tire
pressure. Do not drive on public roads when tires are not inflated to the correct pressure.
WARNING: Do not depend on TPMS sensors to accurately determine pressures and trigger alerts. It is the driver's
responsibility to maintain correct tire pressures (see Maintaining Tire Pressures on page 758). Over or under-inflated
tires can result in loss of control or tire damage, which can lead to serious injury.
Automatic Reset of TPMS Sensors

After replacing one or more wheels (but not after replacing a tire), the TPMS sensors are relearned to ensure tire pressure
warnings are accurate. TPMS sensors reset automatically within 10 minutes of driving over 15 mph (25 km/h).
WARNING: If your CybertruckModel SModel XModel 3Model Y is equipped with aftermarket tires that differ in size from
those printed on the Tire and Loading Information Label (see Vehicle Loading on page 850), it is the driver's
responsibility to determine the correct tire pressure. Do not drive on public roads when tires are not inflated to the
correct pressure.
WARNING: Do not depend on TPMS sensors to accurately determine pressures and trigger alerts. It is the driver's
responsibility to maintain correct tire pressures (see Maintaining Tire Pressures on page 758). Over or under-inflated
tires can result in loss of control or tire damage, which can lead to serious injury.
Replacing a Tire Sensor

If the Tire Pressure warning indicator displays frequently, use the mobile app to schedule a service appointment to determine
if a tire sensor needs to be replaced. If a non-Tesla Service Center repairs or replaces a tire, the tire sensor may not work until
Tesla performs the setup procedure.

Owner's Manual

773

Owners Manual
Seasonal Tire Types
Understand Your Tire Type

The type of tires that your vehicle is originally equipped with depends on vehicle model and market region. It is important to
understand the capabilities of your vehicle's tires and whether they are suited for summer, all-season, or winter driving. Check
the information on the sidewall of a tire for information about a tire's performance characteristics (see Understanding Tire
Markings on page 886).
Summer and All-Season Tires

Summer tires and all season tires are designed for maximum dry and wet road performance but are not designed to perform
well in winter conditions. All-season tires are designed to provide adequate traction in most conditions year-round, but may
not provide the same level of traction as winter tires in snowy or icy conditions. All-season tires can be identified by “ALL
SEASON" and/or "M+S” (mud and snow) on the tire sidewall.
If driving in cold temperatures or on roads where snow or ice may be present, Tesla recommends using winter tires.
WARNING: In cold temperatures or on snow or ice, summer and all-season tires do not provide adequate traction.
Selecting and installing the appropriate tires for winter conditions is important to ensure the safety and optimum
performance of your CybertruckModel SModel XModel 3Model Y.
Winter Tires

Use winter tires to increase traction in snowy or icy conditions. When installing winter tires, always install a complete set of
four tires at the same time. Winter tires must be the same diameter, brand, construction and tread pattern on all four wheels.
Winter tires can be identified by a mountain/snowflake symbol on the tire's sidewall.

When driving with winter tires, you may experience more road noise, shorter tread life, and less traction on dry roads.
NOTE: Installing winter tires with aggressive compound and tread design may result in temporarily-reduced regenerative
braking power. However, your vehicle is designed to recalibrate itself to restore regenerative braking power after a short
period of normal driving.
NOTE: If you install winter tires or replace your tires, reset the tire configuration by navigating to Controls > Service > Wheel &
Tire Configuration > Tires (see Tire Configuration on page 771). This resets the learned tire settings and improves the driving
experience on your new tires.
Driving in Low Temperatures
Tire performance is reduced in low ambient temperatures, resulting in reduced grip and an increased susceptibility to damage
from impacts. Performance tires (summer applications) have reduced traction in ambient temperatures below 40° F (5° C),
and are not recommended in snow/ice conditions. Performance tires can temporarily harden when cold, causing you to hear
rotational noise for the first few miles (kilometers) until the tires warm up.
Using Tire Chains
Tesla has tested and approved the following tire chains (also called snow chains) to increase traction in snowy conditions. Tire
chains should only be installed on the rear tires. The approved tire chains can be purchased from Tesla.
Tire Size

Recommended Chain

18"/19"

König CG-9 103

20"

König K-SUMMIT K34

Tire Size

Recommended Chain

18"

König CG-9 102

774

Owner's Manual

Owners Manual
Tire Size

Recommended Chain

19"

König CG-9 103

Tire Size

Recommended Chain

20"/22"

KONIG K-SUMMIT K67

Tire Size

Recommended Chain

20"

KONIG K-SUMMIT K67

Do not use tire chains on 22" tires.
Tire Size

Recommended Chain

19"

KONIG K-SUMMIT K45

Do not use tire chains on 21" tires.
Tire Size

Recommended Chain

19"/20"

KONIG XG-12 PRO SIZE 252

21"

KONIG K-SUMMIT XXL K66
CAUTION: If your CybertruckModel SModel XModel 3Model Y is equipped with aero covers, you must remove them
before installing tire chains (see Removing and Installing Aero Covers on page 764). Failure to do so can cause damage
not covered by the warranty.
CAUTION: Do not put tire chains on summer tires, doing so can cause damage.

When installing tire chains, follow the instructions and warnings provided by the tire chain manufacturer. Mount them evenly
and as tight as possible.
When using tire chains:
• Inspect the tire chains for loose fittings and damaged links before each use.
• Set air suspension (if equipped) to StandardMedium and turn off the Default Ride Height to Low setting (see Air Suspension
on page 472Air Suspension on page 475Air Suspension on page 477).
• Set air suspension to Medium and turn off the Default Ride Height to Low setting.
• Avoid heavily loading CybertruckModel SModel XModel 3Model Y (heavy loads can reduce the clearance between the tires
and the body).
• Do not drive the vehicle without the chains properly installed.
• Drive slowly. Do not exceed 30 mph (48 km/h).
• Remove the tire chains as soon as conditions allow.
NOTE: Tire chains are prohibited in some jurisdictions. Check local laws before installing tire chains.
CAUTION: Air suspension (if equipped ) should remain in the Medium ride height setting to avoid damage.
CAUTION: Using non-recommended tire chains, or using tire chains on other sized tires can damage the suspension,
body, wheels, and/or brake lines. Damage caused by using non-recommended tire chains, or incorrectly installing tire
chains, is not covered by the warranty.
CAUTION: Do not use snow chains on the front tires.
CAUTION: Never deflate your tires to put on tire chains. When re-inflated, the chains might fit too tightly and cause tire
damage.
CAUTION: Ensure that the tire chains cannot touch suspension components or brake lines. If you hear the chains making
unusual noises that would indicate contact with CybertruckModel SModel XModel 3Model Y, stop and investigate
immediately.
Owner's Manual

775

Owners Manual
Temporary Tire Repair
Tire Repair Kit
Your CybertruckModel SModel XModel 3Model Y has no spare tire. Depending on the legislations that apply to the region in
which you purchased CybertruckModel SModel XModel 3Model Y, a tire repair kit may or may not be included. If a tire repair
kit was not provided in CybertruckModel SModel XModel 3Model Y upon delivery, you can purchase one from Tesla.
NOTE: Although CybertruckModel SModel XModel 3Model Y does not have a spare tire, in the event of a flat tire, Roadside
Assistance provides towing coverage for up to 50 miles.
The tire repair kit consists of a compressor and a canister of tire sealant (enough to repair one tire). When injected into a tire,
the sealant can penetrate a small puncture up to 1/4" (6 mm) to form a temporary repair.

NOTE: For punctures larger than 1/4” (6 mm), severe tread damage, a damaged sidewall, ripped tires or tires that have come
off the rim, contact Roadside Assistance.
WARNING: The tire repair kit is a temporary repair only. You must repair or replace a damaged tire as soon as possible.
WARNING: Do not exceed 30 mph (48 km/h) when driving with a tire that has been temporarily repaired with sealant.
WARNING: Follow all directions and warnings on the tire repair kit before starting a repair.
CAUTION: Do not drive on a deflated tire as this can cause serious damage.
Tire Sealant Canister

The tire sealant provided in the Tesla tire repair kit is approved for use with CybertruckModel SModel XModel 3Model Y and is
designed not to damage the TPMS (Tire Pressure Monitoring System) sensors. Therefore, you must replace it only with one of
the same type and capacity (see Replacing the Sealant Canister on page 779). Tire sealant canisters can be purchased from
Tesla.
The tire sealant has an expiration date printed on the outside of the canister. If the expiration date has passed, the sealant
might not work as expected. Always replace an expired tire sealant canister.
WARNING: Do not use any tire sealant other than the one available from Tesla. Doing so could cause tire pressure
sensors to malfunction.
WARNING: Always read and follow the safety and handling instructions printed on the sealant canister.
WARNING: Keep tire sealant out of the reach of children.
WARNING: Tire sealant can be harmful if it contacts the eyes or if swallowed or inhaled. If the sealant comes into contact
with your eyes, immediately flush with water and seek medical attention if irritation persists. If swallowed, do not induce
vomiting and seek medical assistance immediately. If inhaled, breathe fresh air. Inhalation can cause drowsiness and
dizziness. If breathing is affected, seek medical assistance immediately.

776

Owner's Manual

Owners Manual
Inflating with Sealant and Air
If you have a Tesla tire repair kit, follow these steps to temporarily repair a small tire puncture (less than 1/4” (6 mm)).
1. Stop CybertruckModel SModel XModel 3Model Y in a safe place away from traffic and ask passengers to wait in a safe
area.
2. Turn on the hazard warning flashers to alert other road users.
3. If possible, position the wheel with the puncture at the bottom.
4. Detach the power supply connector from the back of the compressor and plug it into the low voltage power socket located
on the front of center console.

5. Release the clear plastic hose from the tire compressor.
6. Remove the red cap and screw the end of the hose onto the tire’s valve.

7. Attach the sealant kit’s black air hose to the sealant valve and press the lever down to secure it in place.

Owner's Manual

777

Owners Manual

8. Ensure the compressor is lying on a level surface with the pressure gauge facing to the side as shown in Step 5.
9. Turn on the compressor.
10. Inflate the tire to the recommended pressure.
11. Turn off the compressor and disconnect the hose from the tire’s valve. Wipe any excess sealant from the tire valve and
wheel rim.
12. Immediately drive for 5 miles (8 km) to distribute the sealant around the tire. Do not exceed 30 mph (48 km/h).
13. Stop and check the tire’s pressure. If necessary, inflate using the black air hose.
14. Have the tire repaired or replaced as soon as possible.
15. Replace the tire repair sealant canister (see Replacing the Sealant Canister on page 779).
Inflating with Air Only
If you have a Tesla tire repair kit, follow these steps to inflate a tire with air:
1. Detach the power supply connector from the rear of the compressor and plug it into the low voltage power socket located
in CybertruckModel SModel XModel 3Model Y on the front of center console.

2. Release the black air hose from the compressor.
3. Attach the air hose to the valve and press the lever down to secure it in place.
778

Owner's Manual

Owners Manual

4. Ensure the compressor is lying on a level surface with the pressure gauge facing to the side where you can read it.
5. To add air, turn on the compressor and inflate until the desired pressure is reached.
6. To release air, turn off the compressor, then press and hold the red button until the desired pressure is reached.
NOTE: For your convenience, the tire repair kit includes a selection of adapters that allow you to inflate other items. These
adapters are located in a compartment on the back of the compressor.

CAUTION: To avoid overheating, do not use the compressor continuously for more than eight minutes. Allow the
compressor to cool for 15 minutes between uses.
CAUTION: The compressor runs slowly when overheated from excessive use. Turn it off and allow it to cool.
Replacing the Sealant Canister
If you have a Tesla tire repair kit, you can purchase additional or replacement canisters of tire sealant from Tesla.
Follow these steps to replace the canister in your Tesla tire repair kit:
1. Unwrap the clear hose from the compressor. This hose is included with the tire repair sealant canister.
2. Remove the canister cover by sliding it upward to release it from the compressor.

Owner's Manual

779

Owners Manual

3. Remove the canister.

4. Insert the new canister and replace the cover.

780

Owner's Manual

Owners Manual
Cleaning
Cleaning the Exterior
To prevent damage to the exterior, immediately remove corrosive substances (such as grease, oil, bird droppings, tree resin,
dead insects, tar spots, road salt, industrial fallout, etc.). Do not wait until CybertruckModel SModel XModel 3Model Y is due
for a complete wash. If necessary, use denatured alcohol to remove tar spots and stubborn grease stains, then immediately
wash the area with water and a mild, non-detergent soap to remove the alcohol.
NOTE: It is normal for the stainless steel exterior to mature over time, resulting in minor changes to the reflective properties
and color of the metal.
Dents and Scratches
The stainless steel exterior of CybertruckModel SModel XModel 3Model Y is more resistant to dents and dings than most
other vehicles. However, CybertruckModel SModel XModel 3Model Y does not have a clear coat on the surface of the exterior
body panels, meaning any scratches that appear are in the stainless steel panels themselves. Anyone performing scratch
repair should refer to the applicable "Exterior Stainless Steel Panel Refinishing" procedure within the Collision Repair Manual
on service.tesla.com. In addition, do not use, and/or immediately remove, chemical, corrosive, or non-pH neutral substances
(including but not limited to: acidic liquids or materials, grease, oil, tree resin, dead insects, tar spots, road salt, industrial
fallout, etc.) as they can cause corrosion on the vehicle's exterior.
CAUTION: Tesla is not liable for any damage caused by failing to refer to official guidance.
To prevent damage to the paint, immediately remove corrosive substances (grease, oil, bird droppings, tree resin, dead
insects, tar spots, road salt, industrial fallout, etc.). Do not wait until CybertruckModel SModel XModel 3Model Y is due for a
complete wash. If necessary, use denatured alcohol to remove tar spots and stubborn grease stains, then immediately wash
the area with water and a mild, non-detergent soap to remove the alcohol.
Surface Contamination
Over time, you may notice contamination on the surface of the stainless steel body panels. These spots may appear as orange
or brown rust. However, it is important to note that your Cybertruck is not rusting. Refer to the DIY Guide for more
information.
Keep the exterior cameras free of dirt, condensation, or obstructions. These substances can cause unclear pictures or
Autopilot and safety features to stop working (see Cleaning a Camera on page 783Cleaning a Camera on page 783Cleaning a
Camera on page 783Cleaning a Camera on page 784Cleaning a Camera on page 1144).
Follow these steps when washing the exterior of CybertruckModel SModel XModel 3Model Y:
1. Before washing, flush grime and grit from the vehicle using a hose. Flush away accumulations of mud in areas where debris
easily collects (such as wheel wells and panel seams). If salt has been used on the highways (such as during winter
months), thoroughly rinse all traces of road salt from the underside of the vehicle, wheel wells, and brakes.
2. Mix a mild, pH-neutral soap (such as car shampoo) with water until it gets soapy.
3. Soak a soft cleaning sponge in the soap mixture and hand wash CybertruckModel SModel XModel 3Model Y.
CAUTION: Some cleaners and car shampoos contain chemicals that can cause damage or discoloration, especially
for plastic trim pieces, exterior lights, or camera lenses. For example, some car cleaning formulas contain hydroxide
or other highly alkaline or caustic ingredients that can damage exterior components. Do not use acidic products
either. Damage or discoloration resulting from cleaning products is not covered by the warranty.
4. Hand wash CybertruckModel SModel XModel 3Model Y using a clean soft cloth and cold or lukewarm water and a dish
soap with mild degreasing properties. Mix the dish soap and water until it resembles water you would wash your dishes
in.mild, high-quality car shampoo.
CAUTION: Some cleaners and car shampoos contain chemicals that can cause damage or discoloration, especially
for plastic trim pieces, exterior lights, or camera lenses. For example, some car cleaning formulas contain hydroxide
or other highly alkaline or caustic ingredients that can damage exterior components. Do not use acidic products
either. Damage or discoloration resulting from cleaning products is not covered by the warranty.
5. After washing, rinse with clean water to prevent soap from drying on the surfaces.

Owner's Manual

781

Owners Manual
6. Dry thoroughly with microfiber cloths (ensure the cloths are clean of sand, dirt, rocks, etc.), one in each hand, rotating in
circular motions until the surface is dry.
7. Dry thoroughly with a chamois. If necessary, dry the brakes by going on a short drive and applying the brakes multiple
times.
For a waterless wash:
1. Hand wash using a non-ionic pH-neutral waterless wash with a high quality microfiber towel.
2. Dry any streaks thoroughly with a chamois.
3. Remove oil and grease with an organic solvent, such as alcohol or ethyl alcohol.
NOTE: Do not use alcohol or ethyl alcohol on the head or tail lights.
For spot cleaning: Use a glass cleaner and microfiber cloth. Spray glass cleaner and wipe in a zig-zag motion when cleaning
large areas, such as entire panels.
Use isopropyl alcohol wipes (such as those used to clean glasses or screens) to clean away small stains.
NOTE: Tesla does not recommend taking Cybertruck through an automatic car wash.
Cleaning Mud

If your vehicle is covered in mud, such as after off-roading, rinse the entire exterior of the vehicle with water. It is important to
regularly clean the exterior of Cybertruck after off-roading because mud and debris can quickly build up and limit some
vehicle functions.
For certain components, such as the underside, wheel wells, panel seams, and radiator, use a power washer to remove stuckon mud or debris. Then follow the rest of the regular cleaning on page 781 steps, as explained above. Wipe away mud from the
headlights, tail lights, and cameras, as it may affect your vehicle’s ability to drive safely.
Mud and rocks can get trapped between the wheel cover and wheel well. This may cause noise or vibration. Remember to
clear mud, dirt, and rocks from the wheel wells after off-roading.
CAUTION: Damage to the vehicle as a result of debris or mud buildup is not covered by the warranty.
Window Cleaning and Treatments

Clean windows and mirrors using an automotive glass cleaner. Do not scrape or use any abrasive cleaning fluid on glass or
mirrored surfaces. Follow the directions in Cleaning the Exterior on page 781 for best practices in cleaning the exterior glass.
To add a hydrophobic coating to your vehicle's windows, apply the coating only to the side and rear windows, not the front
windshield—doing so may affect the visibility of the autopilot cameras. Follow the hydrophobic coating manufacturer’s
instructions for application details.
NOTE: Tesla is not responsible for any damage associated with applying window treatments on your vehicle.
Car Wash Mode

When taking CybertruckModel SModel XModel 3Model Y to a car wash, Car Wash Mode closes all windows, locks the charge
port, and disables windshield wipers, Sentry Mode, walk-away door locking, and parking sensor chimes. To enable, touch
Controls > Service > Car Wash Mode. Your vehicle must be stationary and not actively charging.
If using an automatic car wash, Enable Free Roll keeps your vehicle in Neutral and activates free roll for the duration of the
wash, while preventing CybertruckModel SModel XModel 3Model Y from applying the Parking brake if you leave the driver's
seat. To enable, press on the brake pedal and touch Enable Free Roll; or shift into Neutral.
Car Wash Mode disables if the vehicle's speed exceeds 9 mph (15 km/h) or by touching Exit on the touchscreen.
CAUTION: Failure to put CybertruckModel SModel XModel 3Model Y in Car Wash Mode may result in damage (for
example, to the charge port or windshield wipers). Damage caused by car washes is not covered by the warranty.

782

Owner's Manual

Owners Manual
Car Wash

If taking CybertruckModel SModel XModel 3Model Y to an automatic car wash is necessary, Car Wash Mode closes all
windows, locks the charge port, and disables windshield wipers, Sentry Mode, and walk-away door locking. To enable, touch
Controls > Car Wash. Your vehicle must be stationary and not actively charging.
If using an automatic car wash, Enable Free Roll keeps your vehicle in Neutral and activates free roll for the duration of the
wash, while preventing CybertruckModel SModel XModel 3Model Y from applying the Parking brake if you leave the driver's
seat. To enable, press on the brake pedal and touch Enable Free Roll; or shift into Neutral.
Car Wash Mode disables if the vehicle's speed exceeds 9 mph (15 km/h) or by touching Exit on the touchscreen.
CAUTION: Failure to put CybertruckModel SModel XModel 3Model Y in Car Wash Mode may result in damage (for
example, to the charge port or windshield wipers). Damage caused by car washes is not covered by the warranty.
Cleaning a Camera

To ensure a clear picture, the camera lens must be clean and free of obstructions. There are two different methods to clean a
camera, depending on when your vehicle was built.
For vehicles built prior to approximately January 12, 2023: Remove any build-up of dirt or debris by spraying water onto the
camera lens with a spray bottle. Do not attempt to remove dirt or debris by wiping an exposed lens with your hands or a cloth.
This debris can damage the surface of the lens when rubbed against it during wiping.
For vehicles built as of approximately January 12, 2023: Remove any build-up of dirt or debris by spraying water onto the
camera lens and drying it with a microfiber cloth. Clean the camera lens every week during wet weather (snow, rain, sleet) and
every month during dry weather.
CAUTION: Do not use chemical-based or abrasive cleaners. Doing so can damage the surface of the lens.
CAUTION: Do not clean an ultrasonic sensor (if equipped) or camera lens with a sharp or abrasive object that can
scratch or damage its surface.
Cleaning a Camera

To ensure a clear picture, the camera lens must be clean and free of obstructions. There are two different methods to clean a
camera, depending on when your vehicle was built.
For vehicles built prior to approximately January 12, 2023: Remove any build-up of dirt or debris by spraying water onto the
camera lens with a spray bottle. Do not attempt to remove dirt or debris by wiping an exposed lens with your hands or a cloth.
This debris can damage the surface of the lens when rubbed against it during wiping.
For vehicles built as of approximately January 12, 2023: Remove any build-up of dirt or debris by spraying water onto the
camera lens and drying it with a microfiber cloth. Clean the camera lens every week during wet weather (snow, rain, sleet) and
every month during dry weather.
CAUTION: Do not use chemical-based or abrasive cleaners. Doing so can damage the surface of the lens.
CAUTION: Do not clean an ultrasonic sensor (if equipped) or camera lens with a sharp or abrasive object that can
scratch or damage its surface.
Cleaning a Camera

To ensure a clear picture, the camera lens must be clean and free of obstructions. There are different methods to clean a
camera, depending on when your vehicle was built.
For vehicles built from Fremont and Gigafactory Austin prior to approximately late May 2023: Remove any build-up of dirt or
debris by spraying water onto the camera lens with a spray bottle. Do not attempt to remove dirt or debris by wiping an
exposed lens with your hands or a cloth. This debris can damage the surface of the lens when rubbed against it during wiping.
For vehicles built from Fremont and Gigafactory Austin as of approximately late May 2023: Remove any build-up of dirt or debris
by spraying water onto the camera lens and drying it with a microfiber cloth. Clean the camera lens every week during wet
weather (snow, rain, sleet) and every month during dry weather.

Owner's Manual

783

Owners Manual
Remove any build-up of dirt or debris by spraying water onto the camera lens with a spray bottle. Do not attempt to remove
dirt or debris by wiping an exposed lens with your hands or a cloth. This debris can damage the surface of the lens when
rubbed against it during wiping.
CAUTION: Do not use chemical-based or abrasive cleaners. Doing so can damage the surface of the lens.
CAUTION: Do not clean an ultrasonic sensor (if equipped) or camera lens with a sharp or abrasive object that can
scratch or damage its surface.
Cleaning a Camera

To ensure a clear picture, the camera lens must be clean and free of obstructions.
Remove any build-up of dirt or debris by spraying water onto the camera lens and drying it with a microfiber cloth. Clean the
camera lens every week during wet weather (snow, rain, sleet) and every month during dry weather.
CAUTION: Do not use chemical-based or abrasive cleaners. Doing so can damage the surface of the lens.
CAUTION: Do not clean an ultrasonic sensor (if equipped) or camera lens with a sharp or abrasive object that can
scratch or damage its surface.
Cautions for Exterior Cleaning

CAUTION: Do not wash in direct sunlight.
CAUTION: Do not use windshield treatment fluids. Doing so can interfere with wiper friction and cause a chattering
sound.
CAUTION: Do not use hot water, detergents, highly alkaline or caustic cleaning ingredients or solvents, specifically
those containing hydroxide.
CAUTION: If using a pressure washer, maintain a distance of at least 12" (30 cm) between the nozzle and the surface of
CybertruckModel SModel XModel 3Model Y. Avoid aiming the water jet directly at parking sensors. Keep the nozzle
moving and do not concentrate the water jet on any one area.
CAUTION: Do not aim water hoses directly at windows, door, or hood seals or at electronic modules or exposed cabling.
CAUTION: To avoid corrosive damage that may not be covered by the warranty, rinse away any road salt from the
underside of the vehicle, wheel wells, and brakes. After cleaning the vehicle, dry the brakes by going on a short drive
and applying the brakes multiple times.
CAUTION: Avoid using tight-napped or rough cloths, such as washing mitts. A high-quality microfiber cleaning cloth is
recommended.
CAUTION: If washing in an automatic car wash, use touchless car washes only. These car washes have no parts (brushes,
etc.) that touch the surfaces of CybertruckModel SModel XModel 3Model Y. Some touchless car washes use caustic
solutions that, over time, can cause discoloration of decorative exterior trim. Avoid exposure to soaps and chemicals
above pH 13. If unsure, check the product label or ask the staff at the car wash. Damage caused by improper washing is
not covered by the warranty.
CAUTION: If washing in an automatic car wash, make sure the vehicle is locked. In addition, avoid using controls on the
touchscreen that can result in accidentally opening doors or trunks while the vehicle is being washed. Any damage
caused is not covered by the warranty.
CAUTION: Ensure the wipers are off before washing CybertruckModel SModel XModel 3Model Y to avoid the risk of
damaging the wipers.
CAUTION: Do not use chemical based wheel cleaners or pre-wash products. These can damage the finish on the wheels.
WARNING: Never spray liquid at a high velocity (for example, if using a pressure washer) towards the charge port while
CybertruckModel SModel XModel 3Model Y is charging. Failure to follow these instructions can result in serious injury
or damage to the vehicle, charging equipment, or property.
Cleaning the Interior
Frequently inspect and clean the interior to maintain its appearance and to prevent premature wear. If possible, immediately
wipe up spills and remove marks. For general cleaning, wipe interior surfaces using a soft cloth (such as microfiber) dampened
with a mixture of warm water and mild non-detergent cleaner (test all cleaners on a concealed area before use). To avoid
streaks, dry immediately with a soft lint-free cloth.
784

Owner's Manual

Owners Manual
Interior Glass

Do not scrape, or use any abrasive cleaning fluid on glass or mirrored surfaces. This can damage the reflective surface of the
mirror and the heating elements in the rear window.
Airbags

Do not allow any substance to enter an airbag cover. This could affect correct operation.
Dashboard and Plastic Surfaces

Do not polish the upper surfaces of the dashboard. Polished surfaces are reflective and could interfere with your driving view.
Seats

NOTE: Tesla warranty does not cover damage to seats caused by cleaning solutions or methods that are not approved by Tesla.
Your vehicle’s seats are made of a custom, sustainable, vegan leather which is softer than leather, yet far more durable and
stain resistant. Tesla recommends that you regularly clean and vacuum the interior of your vehicle to maintain performance
and an as-new appearance. You can purchase an all-purpose cleaning kit on the Tesla shop.
Avoid contact with harsh chemicals, including certain cosmetics. Such substances can cause damage, degradation, or
discoloration over time.
For general spills and stains, wipe spills and chemical residues from interior surfaces as soon as possible. Moisten a soft cloth
(preferably microfiber) with warm water and mild soap and gently wipe the stain in a circular motion. Then, wipe dry using a
soft, lint-free cloth. Do not blow dry. Anything more than soap can be too harsh. Using other cleaning agents, disinfectants,
conditioners, or protectants is not recommended.
For white seats: As a last resort, moisten a soft cloth (such as microfiber) with warm water and isopropyl alcohol and gently
wipe the stain in a circular motion (DO NOT use this method on black seats). Clean off any remaining isopropyl alcohol residue
with a soft, damp cloth. Aggressive or extended use of isopropyl alcohol will damage the top coat of the material, allowing
stains to occur more readily and violating the warranty.
CAUTION: Do not use products containing alcohol, bleach (sodium hypoclorite), citrus, naptha, or silicon-based
additives. Do not spray the seat directly with any spray. Do not get water into the seat belt mechanism.
A variety of clothing, accessories, and cosmetics may contain dyes or oils which can transfer onto the seats over time. These
stains are difficult to prevent and cannot always be safely cleaned off.
CAUTION: Aftermarket, non-Tesla seat covers may inhibit the sensitivity of a seat's occupancy sensors and may cause
staining or damage.
If equipped with leather seats, note that leather is prone to dye-transfer which can cause discoloration, particularly on light
colored leather. White and tan leather is coated with an anti-soiling treatment. Using detergents or commercially available
leather cleaners and conditioners is not recommended because they can discolor or dry out the leather.
CAUTION: The front seats are equipped with microphones (see Active Road Noise Reduction on page 62) that must not
be exposed to liquids. To prevent damage to these microphones when cleaning, do not over-saturate the area of the
seats where these microphones are located.
Carpets

Avoid over-wetting carpets. For heavily soiled areas, use a diluted upholstery cleaner.
Seat Belts

Extend the belts to wipe. Do not use any type of detergent or chemical cleaning agent. Allow the belts to dry naturally while
extended, preferably away from direct sunlight.
Door Seals

Wipe door seals with a damp cloth to remove any debris. Excessive debris on the door seals can cause damage when
contacting surrounding surfaces. Avoid using alcohol wipes or any chemical products that can potentially deteriorate the
coating on the door seals.
Owner's Manual

785

Owners Manual
Tesla Built-In Rear Facing Child Seats

Vacuum the seats to remove any loose dirt. Wipe the seats with a soft cloth dampened with warm water. You can also use an
upholstery cleaner designed for automotive use. Extend the belts to wipe. Allow the belts to dry naturally, preferably away
from direct sunlight.
TouchscreenTouchscreenFront and Rear TouchscreensFront and Rear TouchscreensTouchscreen, Rear Touchscreen, and Instrument
PanelTouchscreen and Instrument Panel

Clean the touchscreen(s) and instrument panel using a soft lint-free cloth specifically designed to clean monitors and
displays. Do not use cleaners (such as a glass cleaner) or alcohol-based gel products (such as hand sanitizer) and do not use a
wet wipe or a dry statically-charged cloth (such as a recently washed microfiber). To wipe the front touchscreen without
activating buttons and changing settings, you can enable Screen Clean Mode. Touch Controls > Display > Screen Clean Mode.
The display darkens to make it easy to see dust and smudges. To exit Screen Clean Mode, press and hold HOLD TO EXIT.
Chrome and Metal Surfaces

Polish, abrasive cleaners, alcohol-based gel products (such as hand sanitizer), and hard cloths can damage the finish on
chrome and metal surfaces.
Cautions for Interior Cleaning

CAUTION: Using solvents (including alcohol), alcohol-based gel products (such as hand sanitizer), bleach, citrus,
naphtha, or silicone-based products or additives on interior components can cause damage.
CAUTION: Statically-charged materials can cause damage to the touchscreen or instrument panel.
WARNING: If you notice any damage on an airbag or seat belt, contact Tesla immediately.
WARNING: Do not allow any water, cleaners, or fabric to enter a seat belt mechanism.
WARNING: Exposure to chemical cleaners can be hazardous and can irritate eyes and skin. Read and observe the
instructions provided by the manufacturer of the chemical cleaner.
Polishing, Touch Up, and Body Repair
To preserve the cosmetic appearance of the body, you can occasionally treat the paint surfaces with an approved polish
containing:
• Very mild abrasive to remove surface contamination without removing or damaging the paint.
• Filling compounds that fill scratches and reduce their visibility.
• Wax to provide a protective coating between the paint and environmental elements.
Regularly inspect the exterior paint for damage. Treat minor chips and scratches using a paint touch-up pen (available for
purchase from Tesla, depending on market region). Use the touch-up pen after washing but before polishing or waxing.
Repair rock chips, fractures or scratches. Refer to https://www.tesla.com/support/body-shop-support for more information
on repair locations and available services.
CAUTION: Do not use cutting pastes, color restoration compounds, or polishes containing harsh abrasives. These can
scour the surface and permanently damage the paint.
CAUTION: Do not use chrome polish or other abrasive cleaners.