a chime if it detects that you are likely to run through a red stop light or stop sign. If this happens, TAKE IMMEDIATE
CORRECTIVE ACTION!
The visual and audible warnings cancel after a few seconds, or when you press the brake pedal, whichever comes first.
Stop Light and Stop Sign Warning provides warnings only. It does not slow down or stop CybertruckModel SModel XModel
3Model Y at red traffic lights, stop signs, road markings, etc. If equipped with Traffic Light and Stop Sign Control, you can
enable this feature to automatically stop CybertruckModel SModel XModel 3Model Y at traffic lights and stop signs (see
Traffic Light and Stop Sign Control on page 592).
CAUTION: Stop Light and Stop Sign Warning requires on-board maps to know that a particular stop light or stop sign
exists at a location. In some cases, map data is inaccurate or outdated and may not include all stop lights or stop signs.
Therefore, Stop Light and Stop Sign Warning may not detect all stop lights and stop signs.
WARNING: The Stop Light and Stop Sign Warning feature does not apply the brakes or decelerate
CybertruckModel SModel XModel 3Model Y and may not detect all stop lights and stop signs. Stop Light and Stop Sign
Warning is designed for guidance purposes only and is not a substitute for attentive driving and sound judgment. Keep
your eyes on the road when driving and never depend on Stop Light and Stop Sign Warning to warn you of a stop light or
stop sign.
WARNING: Stop Light and Stop Sign Warning is designed to warn you only when approaching a visible red stop sign,
solid red or later portion of a yellow traffic light. It may not warn you of intersections with flashing lights and it does not
warn you of yield signs or temporary stop and yield signs (such as those used in construction areas). Additionally, Stop
Light and Stop Sign Warning does not warn you of approaching stop lights or stop signs when you are pressing the
accelerator pedal or brake pedal (which disables Autosteer).
Limitations
Autosteer and its associated functions are particularly unlikely to operate as intended when:
• Autosteer is unable to accurately determine lane markings. For example, lane markings are excessively worn, have visible
previous markings, have been adjusted due to road construction, are changing quickly (lanes branching off, crossing over,
or merging), objects or landscape features are casting strong shadows on the lane markings, or the road surface contains
pavement seams or other high-contrast lines.
• Visibility is poor (heavy rain, snow, fog, etc.) or weather conditions are interfering with sensor operation.
• A camera(s) or sensor(s) is obstructed, covered, or damaged.
• Driving on hills.
• Approaching a toll booth.
• Driving on a road that has sharp curves or is excessively rough.
• Bright light (such as direct sunlight) is interfering with the view of the camera(s).
• The sensors (if equipped) are affected by other electrical equipment or devices that generate ultrasonic waves.
• A vehicle is detected in your blind spot when you engage the turn signal.
• CybertruckModel SModel XModel 3Model Y is being driven very close to a vehicle in front of it, which is blocking the view
of the camera(s).
WARNING: Many unforeseen circumstances can impair the operation of Autosteer. Always keep this in mind and
remember that as a result, Autosteer may not steer CybertruckModel SModel XModel 3Model Y appropriately. Always
drive attentively and be prepared to take immediate action.

Navigate on Autopilot
NOTE: Navigate on Autopilot is a BETA feature.
When using Autosteer on a controlled-access highway (a main highway on which road users enter and exit using on-ramps
and off-ramps). Navigate on Autopilot guides CybertruckModel SModel XModel 3Model Y to off-ramps and interchanges
based on your navigation route. Along the highway portion of a navigation route, Navigate on Autopilot also changes lanes to
prepare for exits (route-based lane changes) and to minimize the driving time to your destination (speed-based lane changes).

Owner's Manual

587

Owners Manual
WARNING: Navigate on Autopilot does not make driving autonomous. You must pay attention to the road, keep your
hands on the steering wheelsteering yoke (or steering wheel) at all times, and remain aware of your navigation route.
WARNING: As is the case with normal driving, be extra careful around blind corners, interchanges, and on-ramps and
off-ramps - obstacles can appear quickly and at any time.
WARNING: Navigate on Autopilot may not recognize or detect oncoming vehicles, stationary objects, and special-use
lanes such as those used exclusively for bikes, carpools, emergency vehicles, etc. Remain alert at all times and be
prepared to take immediate action. Failure to do so can cause damage, injury or death.
Enabling and Customizing Navigate on Autopilot
To enable Navigate on Autopilot, touch Controls > Autopilot > Autopilot Features > Autosteer > Navigate on Autopilot (Beta).
Then, to customize how you want Navigate on Autopilot to operate, touch Customize Navigate on Autopilot:
• Enable At Start Of Every Trip: Choose whether or not you want to automatically enable Navigate on Autopilot for every
navigation route. When enabled, the Navigate on Autopilot button on the turn-by-turn direction list is already enabled at
the start of every trip.
• Speed Based Lane Changes: Navigate on Autopilot is designed to perform both route-based and speed-based lane
changes. Route-based lane changes are designed to keep you on your navigation route (for example, moving you into an
adjacent lane to prepare for an upcoming off-ramp) whereas speed-based lane changes are designed to maintain a driving
speed (not to exceed your cruising speed) that allows you to minimize the time it takes to reach your destination (for
example, moving into an adjacent lane to pass a vehicle in front of you). Speed-based lanes changes are optional. You can
use this setting to disable speed-based lane changes or to specify how aggressively you want Navigate on Autopilot to
change lanes to achieve the set cruising speed. The Mild setting is more conservative about lane changes and may result in
a slightly longer driving time whereas Mad Max is designed to allow you to reach your destination in the shortest driving
time possible, but changes lanes only when safe to do so.
• Exit Passing Lane: Choose whether you want Navigate on Autopilot to maneuver out of a passing lane when navigating to a
destination.
NOTE: In addition to route-based and speed-based lane changes, Navigate on Autopilot requests a lane change out of a
passing lane as a reminder to stay in a slower lane when you are not passing other vehicles. Choose NO to disable this and
keep CybertruckModel SModel XModel 3Model Y in a passing lane except when needed to stay on the navigation route.
• Require Lane Change Confirmation: By default, Navigate on Autopilot requires your confirmation before proceeding with a
lane change by pulling the Autopilot stalk toward you or engaging the appropriate turn signal. However, if you want
Navigate on Autopilot to change lanes without requiring this confirmation, turn this setting off. When you turn the setting
off, you can specify if or how you want to be notified of lane changes (Off, Chime, Vibrate, or Both).
WARNING: If you turn off Require Lane Change Confirmation, Navigate on Autopilot notifies you of upcoming lane
changes and off-ramps, but it remains your responsibility to monitor the environment and maintain control of
CybertruckModel SModel XModel 3Model Y at all times. Lane changes can occur quickly and suddenly. Always keep
your hands on the wheel and your eyes on the driving path in front of you.
NOTE: The touchscreen displays route-based lane changes at the top of the map's turn-by-turn direction list to notify you that
an upcoming lane change is needed to stay on the navigation route.
Operating Navigate on Autopilot
Once enabled, the Navigate on Autopilot button appears on the map’s turn-by-turn direction list whenever a navigation route
is active and the route includes at least one controlled-access highway. When enabled, the Navigate on Autopilot button is
blue and the turn-by-turn direction displays the Autosteer icon next to the maneuvers (such as off-ramps) that Navigate on
Autopilot will handle.
The Navigate on Autopilot icon shows in the turn-by-turn direction list when you are navigating to a destination
and Navigate on Autopilot is available but not active.

588

Owner's Manual

Owners Manual
If Navigate on Autopilot is active, the icon is blue. If Enable at Start of Every Trip is turned on, the Navigate on
Autopilot icon is selected whenever you start navigation. Touch the icon to cancel Navigate on Autopilot and
revert to Autosteer. If Enable At Start Of Every Trip is turned off, you must touch the Navigate on Autopilot
button to enable it for each navigation route.

Navigate on Autopilot activates and deactivates as appropriate, based on the type of road you are driving on. For example, if
Autosteer is active and Navigate on Autopilot is enabled, Navigate on Autopilot automatically becomes active when you reach
a controlled-access highway on your navigation route.
Whenever Navigate on Autopilot is active, the instrument panel displays the driving lane as a single blue line in front of
CybertruckModel SModel XModel 3Model Y:

When Navigate on Autopilot is active and you approach an off-ramp or interchange along your navigation route, the
appropriate turn signal engages and Autosteer maneuvers CybertruckModel SModel XModel 3Model Y onto the off-ramp or
interchange.
WARNING: Never depend on Navigate on Autopilot to determine an appropriate lane at an off-ramp. Stay alert and
perform visual checks to ensure that the driving lane is safe and appropriate.
Owner's Manual

589

Owners Manual
When you leave a controlled-access highway (for example, you take an exit or you enter a section of the navigation route that
is no longer supported), Navigate on Autopilot reverts to Autosteer— a chime sounds and the instrument panel displays the
driving lane lines in blue (instead of the single blue in front of CybertruckModel SModel XModel 3Model Y).
NOTE: When determining navigation routes, and maneuvers at interchanges, Navigate on Autopilot considers whether or not
you want to use High Occupancy Vehicle (HOV) lanes. Therefore, ensure the Use HOV Lanes setting is appropriate for your
circumstances (see Maps and Navigation on page 700). If the setting is off, Navigate on Autopilot never uses a HOV lane,
regardless of time of day. If the setting is on, Navigate on Autopilot uses HOV lanes, whenever applicable.
WARNING: When Navigate on Autopilot deactivates, Autosteer remains active. Always be prepared to take appropriate
action.
WARNING: Navigate on Autopilot may not always attempt to exit at an off-ramp or change lanes, even when an exit or
lane change is determined by the navigation route. Always remain alert and be prepared to manually steer onto an offramp, or make a lane change to prepare for, or to exit at, an off-ramp or interchange.
You can cancel Navigate on Autopilot at any time by touching Navigate on Autopilot on the map’s turn-by-turn direction list
(CybertruckModel SModel XModel 3Model Y reverts to Autosteer), or by canceling Autosteer entirely (see Canceling
Autosteer on page 584).
Lane Changes

Navigate on Autopilot changes lanes to either prepare CybertruckModel SModel XModel 3Model Y for an upcoming off-ramp,
to increase your driving speed (not to exceed your set cruising speed), or to move CybertruckModel SModel XModel 3Model
Y out of a passing lane when you are not actively passing other road users. A message displays at the top of the map's turnby-turn direction list to notify you when an upcoming lane change is required to stay on your navigation route. The instrument
panel displays the upcoming driving path:

When the instrument panel displays a message asking you to confirm the lane change, engage the appropriate turn signalor
pull the Autopilot stalk toward you. If you do not confirm the lane change within three seconds, a chime sounds to remind you
that Navigate on Autopilot requires your confirmation to change lanes.
590

Owner's Manual

Owners Manual
If Require Lane Change Confirmation is turned off, Navigate on Autopilot engages the appropriate turn signal, checks for
vehicles and objects, and when appropriate, maneuvers CybertruckModel SModel XModel 3Model Y into the adjacent lane.
If Require Lane Change Confirmation is turned on, you must engage the appropriate turn signal or pull the Autopilot stalk
toward you to confirm that you want Navigate on Autopilot to proceed with the lane change. If you do not confirm the lane
change within three seconds, a chime sounds to remind you that Navigate on Autopilot requires your confirmation to change
lanes.
NOTE: If you ignore a route-based lane change suggestion (for example, you are driving in the left lane while approaching an
off-ramp on the right side of the highway), Navigate on Autopilot is unable to maneuver onto the off-ramp and as a result, you
are re-routed to your destination.
WARNING: Navigate on Autopilot may not always attempt to exit at an off-ramp or change lanes, even when an exit or
lane change is determined by the navigation route. Always remain alert and be prepared to manually steer onto an offramp, or make a lane change to prepare for, or to exit at, an off-ramp or interchange.
Be Ready to Assist

When attempting to change lanes or maneuver CybertruckModel SModel XModel 3Model Y, or when approaching
construction zones, Navigate on Autopilot may be unable to determine the appropriate driving lane (for example, complex
clover leafs and multi-lane off-ramps) and the instrument panel displays an alert indicating that Navigate on Autopilot is trying
to maneuver and may require assistance. When you see the message, be prepared to take immediate action to ensure that it is
safe and appropriate to complete the lane change or maneuver.

Owner's Manual

591

Owners Manual
Traffic Light and Stop Sign Control
NOTE: Traffic Light and Stop Sign Control is a BETA feature and works best on roads that are frequently driven by Tesla vehicles.
Traffic Light and Stop Sign Control attempts to stop at all traffic lights and may also stop at green lights.
Traffic Light and Stop Sign Control is designed to recognize and respond to traffic lights and stop signs, slowing
CybertruckModel SModel XModel 3Model Y to a stop when using Traffic-Aware cruise control or Autosteer. This feature uses
the vehicle's forward-facing cameras, in addition to GPS data, and slows the car for all detected traffic lights, including green,
blinking yellow, and off lights in addition to stop signs and some road markings. As CybertruckModel SModel XModel 3Model
Y approaches an intersection, the instrument clustertouchscreen displays a notification indicating the intention to slow down.
You must confirm that you want to continue or CybertruckModel SModel XModel 3Model Y stops at the red line displayed on
the instrument clustertouchscreen's driving visualization.
WARNING: NEVER make assumptions and predict when and where Traffic Light and Stop Sign Control will stop or
continue through an intersection or road marking. From a driver's perspective, the behavior of Traffic Light and Stop
Sign Control may appear inconsistent. Always pay attention to the roadway and be prepared to take immediate action. It
is the driver's responsibility to determine whether to stop or continue through an intersection. Never depend on Traffic
Light and Stop Sign Control to determine when it is safe and/or appropriate to stop or continue through an intersection.
Before Using
Before using Traffic Light and Stop Sign Control, you must:
• Ensure that forward-facing cameras are unobstructed (see Cleaning a Camera on page 780Cleaning a Camera on page
780Cleaning a Camera on page 780Cleaning a Camera on page 781Cleaning a Camera on page 1139) and calibrated (see
Drive to Calibrate Cameras on page 108Drive to Calibrate Cameras on page 1139). Traffic Light and Stop Sign Control
depends on the ability of the cameras to detect traffic lights, stop signs, and road markings.
• Ensure that the latest version of maps has been downloaded to CybertruckModel SModel XModel 3Model Y. Although
Traffic Light and Stop Sign Control primarily uses visual data received from the vehicle's cameras, greater accuracy is
achieved when using the most recent map data. To check which version of maps is currently downloaded, touch Controls >
Software. You must connect to a Wi-Fi network to receive updated maps (see Map Updates on page 707).
• Enable the feature. With the vehicle in Park, touch Controls > Autopilot > Traffic Light and Stop Sign Control. Once enabled,
Traffic Light and Stop Sign Control operates whenever Traffic-Aware Cruise Control or Autosteer is active.
How it Works
When Traffic Light and Stop Sign Control is enabled and you are using Autosteer, Traffic-Aware Cruise Control, or Full SelfDriving (Beta), the instrument clustertouchscreen displays a popup message to inform you that an upcoming traffic light, stop
sign, or road marking has been detected. As it approaches the stop location, even at an intersection where the traffic light is
green, CybertruckModel SModel XModel 3Model Y slows down and displays a red line to indicate where
CybertruckModel SModel XModel 3Model Y will stop. To continue through the intersection—even if the traffic light is green —
you must pull the Autopilot stalk toward you orpress down on the drive stalk orpress down on the drive stalk or briefly press
the accelerator pedal to give the vehicle permission to proceed. When you've confirmed that you want to proceed, the red
stop line turns gray and CybertruckModel SModel XModel 3Model Y continues through the intersection and resumes your set
cruising speed.
NOTE: If CybertruckModel SModel XModel 3Model Y is approaching a green light and detects that a vehicle in front of you is
continuing through the intersection, CybertruckModel SModel XModel 3Model Y continues through the intersection without
requiring your confirmation, provided you are not in a turning lane and the vehicle can detect that your hands are on the
steering wheelsteering yoke (or steering wheel).
NOTE: If, after you pull the Autopilot stalk toward you or press down on the drive stalk or press down on the drive stalk or
briefly press the accelerator pedal to confirm that you want to continue through the intersection, the traffic signal changes
before you enter the intersection (for example, the light changes from green to yellow or from yellow to red),
CybertruckModel SModel XModel 3Model Y may determine that it is not appropriate to proceed. Therefore,
CybertruckModel SModel XModel 3Model Y stops and you must press the accelerator to proceed. At all times, it is your
responsibility to ensure the vehicle stops or accelerates appropriately and safely.

592

Owner's Manual

Owners Manual
WARNING: Traffic Light and Stop Sign Control DOES NOT turn CybertruckModel SModel XModel 3Model Y through an
intersection unless Full Self-Driving (Beta) is engaged. When in a turning lane, CybertruckModel SModel XModel
3Model Y stops at the red stop line. To proceed, pull the Autopilot stalk toward you or press down on the drive stalk or
press down on the drive stalk or briefly press the accelerator pedal—CybertruckModel SModel XModel 3Model Y
continues straight through the intersection (even when in a turning lane), so you MUST manually steer
CybertruckModel SModel XModel 3Model Y through the intersection (which cancels Autosteer).
Traffic Light and Stop Sign Control is designed to operate as described only when the following conditions are met:
• Autosteer, Full Self-Driving (Beta), or Traffic-Aware Cruise Control is engaged.
• The cameras can detect an upcoming traffic light, stop sign or road marking (for example, cameras are unobstructed and
have a clear line-of-sight to the traffic light, stop sign, or road marking).
• The instrument clustertouchscreen on CybertruckModel SModel XModel 3Model Y is displaying an upcoming traffic light
in "bold" format. CybertruckModel SModel XModel 3Model Y does not acknowledge traffic lights that the instrument
clustertouchscreen shows as faded. If a traffic light is not directly ahead of the camera (for example, it is located at an
angle of the camera's view, or located in an adjacent lane) the instrument clustertouchscreen displays it as faded and
CybertruckModel SModel XModel 3Model Y does not slow down and stop for it.
WARNING: If the instrument clustertouchscreen is not displaying a red stop line at an upcoming intersection,
CybertruckModel SModel XModel 3Model Y does not slow down or stop. It is the driver's responsibility to pay attention
to upcoming intersections and monitor traffic conditions to determine when and if the vehicle should stop and then to
take appropriate action as needed.
WARNING: Never depend on Traffic Light and Stop Sign Control to determine whether to stop at, or proceed through, an
intersection. Drive attentively by watching the road and paying attention to the roadway, upcoming intersections, traffic
conditions, crosswalks, and other road users. It is always the driver's responsibility to determine whether to stop or
proceed. Be prepared to take immediate action. Failure to do so can result in injury or death.
WARNING: In some situations, Traffic Light and Stop Sign Control may inaccurately detect a traffic light or stop sign,
causing CybertruckModel SModel XModel 3Model Y to slow down unexpectedly. Be prepared to take immediate action
at all times.
WARNING: You must pull the Autopilot stalk toward you or press down on the drive stalk or press down on the drive stalk
or briefly press the accelerator pedal to confirm that you want to proceed through an intersection, regardless of the
status of the traffic light. If you do not confirm, CybertruckModel SModel XModel 3Model Y stops at the red stop line
displayed on the instrument clustertouchscreen, even if stopping may be inappropriate. Stopping at a green light may
confuse other drivers and may result in a collision, injury or death. Therefore, always pay attention to upcoming
intersections and be prepared to manually brake or accelerate in response to surroundings.
WARNING: Never assume that your ability to see a traffic light, stop sign, or road marking (especially at a complex
intersection, or an intersection in which a traffic light or sign is partially obstructed, etc.) means that
CybertruckModel SModel XModel 3Model Y can also see it and respond appropriately.
WARNING: Even the most recent map data does not include all traffic lights and stop signs. Therefore, Traffic Light and
Stop Sign Control relies heavily on the ability of the cameras to detect traffic lights, stop signs, road markings, etc. As a
result, CybertruckModel SModel XModel 3Model Y may ignore an intersection that is blocked from the camera's view
(for example, obstructed by a tree or a large vehicle or object, or located near a steep hill or sharp curve).
WARNING: Traffic Light and Stop Sign Control is not a substitute for attentive driving and sound judgment.

Owner's Manual

593

Owners Manual
Traffic Lights

When driving with Autosteer or Traffic-Aware Cruise Control engaged, and Traffic Light and Stop Sign Control enabled,
CybertruckModel SModel XModel 3Model Y is designed to respond as follows when approaching intersections controlled by
a traffic light:
Type of Traffic Light

Vehicle Intended Response
At a solid green traffic light, or at a traffic light that is currently off (not illuminated),
CybertruckModel SModel XModel 3Model Y slows down.
If you are following a car in front of you that continues through the intersection, the
instrument clustertouchscreen displays a green stop line and provided your hands are
detected on the steering wheelsteering yoke (or steering wheel),
CybertruckModel SModel XModel 3Model Y also continues. If a car is not in front of you,
the instrument clustertouchscreen displays a red stop line and you must confirm that you
want to continue through the intersection by pulling the Autopilot stalk toward you or
press down on the drive stalk or press down on the drive stalk or briefly pressing the
accelerator pedal. If you don’t confirm, CybertruckModel SModel XModel 3Model Y
stops at the red stop line.
NOTE: CybertruckModel SModel XModel 3Model Y resumes the set cruising speed when
it continues through the intersection, taking into consideration the speed of a vehicle in
front of you.

CybertruckModel SModel XModel 3Model Y slows down and comes to a complete stop at
the red stop line displayed on the instrument clustertouchscreen. When you want to
continue through the intersection (for example, the light turns green again, or once
CybertruckModel SModel XModel 3Model Y has come to a complete stop), you must pull
the Autopilot stalk toward you or press down on the drive stalk or press down on the drive
stalk or briefly press the accelerator pedal.

CybertruckModel SModel XModel 3Model Y slows down and comes to a complete stop at
the red stop line displayed on the instrument clustertouchscreen. When you want to
proceed through the intersection (for example, the light turns green again), you must pull
the Autopilot stalk toward you or press down on the drive stalk or press down on the drive
stalk or briefly press the accelerator pedal.
NOTE: If the traffic light changes after you've confirmed that you want to proceed (for
example, a green traffic light turns yellow), CybertruckModel SModel XModel 3Model Y
may stop instead of continuing, especially if CybertruckModel SModel XModel 3Model Y
determines that it can safely stop before entering the intersection.
NOTE: CybertruckModel SModel XModel 3Model Y is not designed to proceed through
an intersection when the traffic light is red or if the light turns yellow in situations when
there is adequate distance to safely stop before entering the intersection.
NOTE: You can take over driving at any time by manually braking to cancel Autosteer or
Traffic-Aware Cruise Control.

594

Owner's Manual

Owners Manual
Type of Traffic Light

Vehicle Intended Response

CybertruckModel SModel XModel 3Model Y slows down. To proceed, you must pull the
Autopilot stalk toward you or press down on the drive stalk or press down on the drive
stalk or briefly press the accelerator pedal. If you don’t,
CybertruckModel SModel XModel 3Model Y stops at the red stop line displayed on the
instrument clustertouchscreen.
NOTE: To prevent CybertruckModel SModel XModel 3Model Y from stopping, and to
minimize how much it slows down as it approaches, you can confirm that you want to
proceed by pulling the Autopilot stalk toward you or press down on the drive stalk or
press down on the drive stalk or briefly pressing the accelerator pedal at any time after
the instrument clustertouchscreen displays the red stop line.
CybertruckModel SModel XModel 3Model Y resumes your set cruising speed
immediately after you confirm (taking into consideration the speed of a vehicle in front of
you).
WARNING: Approach attentively and be prepared to press the brake pedal to slow
down or stop.

CybertruckModel SModel XModel 3Model Y slows down and comes to a complete stop at
the red stop line displayed on the instrument clustertouchscreen. When you want to
proceed through the intersection (for example, traffic laws and conditions indicate it is
safe and legal to proceed), you must pull the Autopilot stalk toward you or press down on
the drive stalk or press down on the drive stalk or briefly press the accelerator pedal.

Owner's Manual

595

Owners Manual
Stop Signs and Road Markings

When driving with Autosteer or Traffic-Aware Cruise Control engaged, and Traffic Light and Stop Sign Control enabled,
CybertruckModel SModel XModel 3Model Y is designed to respond as follows when approaching intersections controlled by
stop signs, stop lines, or road markings:
Type of Intersection

Vehicle Intended Response
CybertruckModel SModel XModel 3Model Y assumes the right of way and continues straight
without slowing down or stopping.

No Traffic Control

Arm of T-junction
If CybertruckModel SModel XModel 3Model Y detects a T-junction based on the map data,
CybertruckModel SModel XModel 3Model Y slows down and comes to a complete stop at the
red stop line displayed on the instrument clustertouchscreen. When you want to proceed, you
must take over steering and acceleration.
WARNING: CybertruckModel SModel XModel 3Model Y may not stop at a T-junction
that does not have a stop sign or stop line, or if the T-junction is not included in the map
data. Drive attentively and be prepared to stop (when necessary and/or appropriate).

End of T-junction
CybertruckModel SModel XModel 3Model Y slows down and comes to a complete stop at the
red stop line displayed on the instrument clustertouchscreen. When you want to proceed
through the intersection, you must pull the Autopilot stalk toward you or press down on the
drive stalk or press down on the drive stalk or briefly press the accelerator pedal.
NOTE: If you confirm that you want to proceed through an intersection controlled by a stop
sign by pulling the Autopilot stalk toward you or press down on the drive stalk or press down
on the drive stalk or briefly pressing the accelerator pedal before
CybertruckModel SModel XModel 3Model Y has stopped, your confirmation is ignored.
CybertruckModel SModel XModel 3Model Y is not designed to proceed through a stop sign
without stopping.
Stop Sign

596

NOTE: Even when using Autosteer, and even if you have engaged a turn signal, you must turn
the steering wheelsteering yoke (or steering wheel) yourself (which cancels Autosteer) to
complete a turn at an intersection.

Owner's Manual

Owners Manual
Type of Intersection

Vehicle Intended Response

Stop Sign and Road Marking

Road Marking
WARNING: CybertruckModel SModel XModel 3Model Y also slows down and stops at a roundabout. You must take over
steering (which cancels Autosteer) and pull the Autopilot stalk toward you or press down on the drive stalk or press
down on the drive stalk or briefly press the accelerator pedal to confirm that you want to continue through the
roundabout.
WARNING: At crosswalks, CybertruckModel SModel XModel 3Model Y may slow down and may stop, depending on
whether the crosswalk is controlled by a traffic light and whether the cameras detect pedestrians, bicyclists, etc. in the
crosswalk. Pay particular attention at crosswalks and be prepared to take over at any time. Failure to do so can result in
injury or death.
Limitations
Depending on many different circumstances and environmental conditions, Traffic Light and Stop Sign Control may or may not
stop at:
• Railroad crossings.
• Keep-out zones.
• Toll booths.
• Crosswalk systems.
• Yield signs or temporary traffic lights and stop signs (such as at construction areas).
• Miscellaneous traffic U-turn lights, bicycle and pedestrian crossing lights, lane availability lights, etc.
In addition, Traffic Light and Stop Sign Control is particularly unlikely to operate as intended, can disengage, or may not
operate, when one or more of the following conditions are present:
• Driving through consecutive light-controlled intersections that are very close to each other.
• Visibility is poor (heavy rain, snow, fog, etc.) or weather conditions are interfering with camera or sensor operation.
• Bright light (such as direct sunlight) is interfering with the view of the camera(s).

Owner's Manual

597

Owners Manual
• A camera is obstructed, covered, damaged, or not properly calibrated.
• Driving on a hill or on a road that has sharp curves on which the cameras are unable to see upcoming traffic lights or stop
signs.
• A traffic light, stop sign, or road marking is obstructed (for example, a tree, a large vehicle, etc.).
• CybertruckModel SModel XModel 3Model Y is being driven very close to a vehicle in front of it, which is blocking the view
of a camera.
WARNING: The limitations listed above are not an exhaustive list of reasons why CybertruckModel SModel XModel
3Model Y may not operate as expected. Many unforeseen circumstances can adversely impact the accurate operation
of Traffic Light and Stop Sign Control. Using this feature does not reduce or eliminate the need to drive attentively and
responsibly. You must be prepared to take appropriate and immediate action at all times.

Full Self-Driving (Beta)
When Full Self-Driving (Beta) (also referred to as Autosteer on City Streets) is engaged, CybertruckModel SModel XModel
3Model Y attempts to drive to your destination by following curves in the road, stopping at and negotiating intersections,
making left and right turns, navigating roundabouts, and entering/exiting highways.
Unlike Traffic-Aware Cruise Control, Autosteer, and Navigate on Autopilot, which are intended for use on multi-lane roadways
with clear lane markings, Full Self-Driving (Beta) is meant to work in a variety of driving scenarios. You can use Full SelfDriving (Beta) on any type of roadway, including residential and city streets.
Always remember that Full Self-Driving (Beta) does not make CybertruckModel SModel XModel 3Model Y autonomous and
requires a fully attentive driver who is ready to take immediate action at all times. While Full Self-Driving (Beta) is engaged, you
must monitor your surroundings and other road users at all times.
Driver intervention may be required in certain situations, such as on narrow roads with oncoming cars, in construction zones,
or while going through complex intersections. For more examples of scenarios in which driver intervention might be required,
see Limitations and Warnings on page 627.
Full Self-Driving (Beta) uses inputs from cameras mounted at the front, rear, left, and right of
CybertruckModel SModel XModel 3Model Y to build a model of the area surrounding CybertruckModel SModel XModel
3Model Y (see Cameras on page 101). The Full Self-Driving computer installed in CybertruckModel SModel XModel 3Model Y
is designed to use this input, rapidly process neural networks, and make decisions to safely guide you to your destination.
NOTE: Full Self-Driving (Beta) is a beta feature. As Tesla’s Full Self-Driving (Beta) capabilities evolve,
CybertruckModel SModel XModel 3Model Y is upgraded through over-the-air software updates. Download updates as soon
as they become available.
Like other Autopilot features, Full Self-Driving (Beta) requires a fully attentive driver and will display a series of escalating
warnings requiring driver response. You must keep your hands on the steering wheelsteering yoke (or steering wheel) while
Full Self-Driving (Beta) is engaged. In addition, the cabin camera monitors driver attentiveness (see Cabin Camera on page
106).
Use Full Self-Driving (Beta) in limited Beta only if you will pay constant attention to the road and be prepared to act
immediately, especially around blind corners, crossing intersections, and in narrow driving situations. For more information,
see Limitations and Warnings on page 627.
CAUTION: As Full Self-Driving (Beta) deployment expands, Tesla will gradually make it available to eligible customers in
select countries outside of the United States and Canada. Because every country contains unique infrastructure, driving
behaviors, and traffic patterns that Full Self-Driving (Beta) must adapt to over time, it is essential for drivers using Full
Self-Driving (Beta) in newly eligible countries to be extra attentive and overly cautious. You must be ready to take over
safely at any time.
WARNING: Full Self-Driving (Beta) is a hands-on feature that requires you to pay attention to the road at all times. Keep
your hands on the steering wheelsteering yoke (or steering wheel) at all times, be mindful of road conditions and
surrounding traffic, pay attention to pedestrians and cyclists, and always be prepared to take immediate action. Failure
to follow these instructions could cause damage, serious injury or death. It is your responsibility to familiarize yourself
with the limitations of Full Self-Driving (Beta) and the situations in which it may not work as expected. For more
information, see Limitations and Warnings on page 627.

598

Owner's Manual

Owners Manual
Before Using Full Self-Driving (Beta)
Before using Full Self-Driving (Beta), you must:
• Ensure that forward-facing cameras are unobstructed and calibrated (see Cameras on page 101). Full Self-Driving (Beta)
depends on the ability of the cameras to detect traffic lights, stop signs, and road markings.
• Ensure that the latest version of maps has been downloaded to CybertruckModel SModel XModel 3Model Y. Although Full
Self-Driving (Beta) primarily uses visual data received from the vehicle's cameras, greater accuracy is achieved when using
the most recent map data. To check which version of maps is currently downloaded, touch Controls > Software. You must
connect to a Wi-Fi network to receive updated maps (see Map Updates on page 707).
In addition, you must enable Full Self-Driving (Beta) before you can use it. To enable Full Self-Driving (Beta), touch Controls >
Autopilot > Autopilot Features > Full Self-Driving (Beta) and then, after carefully reading and understanding the popup window,
touch Yes.
NOTE: When Full Self-Driving (Beta) is enabled, Autosteer and Navigate on Autopilot are automatically disabled. In situations
where you would use Autosteer and Navigate on Autopilot, such as on a controlled-access, multi-lane highway, activate Full
Self-Driving (Beta) the same way you would Autosteer.
Customize Full Self-Driving (Beta) settings by touching Controls > Autopilot.
• Full Self-Driving (Beta) Profile: If desired, change the default setting of Average to Chill or Assertive. Chill provides a more
relaxed driving style and Assertive drives with more urgency.
• Minimal Lane Changes for the Current Drive: When selected, Full Self-Driving (Beta) makes fewer lane changes on the
current drive. CybertruckModel SModel XModel 3Model Y will still make lane changes as necessary to follow the
navigation route.
NOTE: While Full Self-Driving (Beta) is selected, tilting the right steering wheelsteering yoke (or steering wheel) button to
the right or left also allows you to change the Full Self-Driving (Beta) profile and enable or disable Minimal Lane Changes.
To Use Full Self-Driving (Beta)
Once Full Self-Driving (Beta) is enabled, activate it the same way you would Autosteer (see Autosteer on page 551).
1. Enter a destination. If you do not choose a destination, CybertruckModel SModel XModel 3Model Y chooses the most
probable driving path or suggests a destination based on your driving.
2. When the touchscreen displays the gray steering wheel icon, press the right scroll wheelpress the right scroll wheelmove
the drive stalk fully down twice in quick successionmove the drive stalk fully down twice in quick succession.
NOTE: To choose how you activate Full Self-Driving (Beta) go to Controls > Autopilot > Autopilot Activation and choose
Single Click or Double Click. If the setting for Autopilot Activation is set to Double Click, you must double-press the right
scroll wheel to engage Autosteer.
NOTE: To choose how you activate Full Self-Driving (Beta) go to Controls > Autopilot > Autopilot Activation and choose
Single Click or Double Click. If the setting for Autopilot Activation is set to Double Click, you must double-press the right
scroll wheel to engage Autosteer.
NOTE: To choose how you activate Full Self-Driving (Beta) go to Controls > Autopilot > Autopilot Activation and choose
Single Pull or Double Pull. If the setting for Autopilot Activation is set to Single Pull, Full Self-Driving (Beta) engages when
you pull the drive stalk fully down once.
NOTE: To choose how you activate Full Self-Driving (Beta) go to Controls > Autopilot > Autopilot Activation and choose
Single Pull or Double Pull. If the setting for Autopilot Activation is set to Single Pull, Full Self-Driving (Beta) engages when
you pull the drive stalk fully down once.

Owner's Manual

599

Owners Manual

You can engage Full Self-Driving (Beta) at any speed less than 85 mph (150 km/h), including when
CybertruckModel SModel XModel 3Model Y is at a standstill.
The instrument clustertouchscreen displays the maximum speed in blue. When you engage Full Self-Driving (Beta), the set
cruising speed defaults to the speed limit, plus any offset you’ve specified. If Autopilot is unable to determine the speed limit,
the cruising speed is your current speed, in addition to any specified offset.
To indicate that Full Self-Driving (Beta) is available but not engaged, the top corner of the
touchscreen displays a gray steering wheelsteering yoke (or steering wheel) icon next to the
driving gear.

When Full Self-Driving (Beta) is engaged, the steering wheelsteering yoke (or steering wheel) icon
is blue and a blue line represents your driving path.

600

Owner's Manual

Owners Manual
When Full Self-Driving (Beta) is engaged, the touchscreen displays a visualization of the environment surrounding
CybertruckModel SModel XModel 3Model Y, including the roadway and detected objects such as vehicles, pedestrians,
curbs, bicyclists, and more. Objects shown in blue represent priorities that Full Self-Driving (Beta) is actively controlling for at
a given time.
NOTE: The Full Self-Driving (Beta) visualization may not be a holistic representation of the objects, road markings, road
signals, and other variables that Full Self-Driving (Beta) takes into account as it attempts to drive to your destination. While
Full Self-Driving (Beta) is engaged, it uses data from the cameras on CybertruckModel SModel XModel 3Model Y that may not
be represented in the visualization (see Cameras on page 101).
NOTE: Full Self-Driving (Beta) uses Tesla’s vision-based system and therefore radar (if equipped) is disabled.

The visualization will also inform you of the system’s intended action by displaying a message on the instrument
clustertouchscreen, such as when the vehicle is slowly creeping for visibility to take a turn at an intersection.
You can widen the visualization area to fullscreen. Enable the setting by touching Controls > Autopilot > Full Self-Driving (Beta)
> Expanded Full Self-Driving Visualization. Then on the touchscreen, swipe the visualization window handle to fill the entire
screen.
NOTE: You can override Full-Self Driving (Beta) at any time if you are uncomfortable or uncertain about the system’s intended
course of action. You are driving CybertruckModel SModel XModel 3Model Y at all times.
Making Turns, Changing Lanes, and Negotiating Intersections
Full Self-Driving (Beta) changes lanes, makes left and right turns, follows on- and off-ramps, and takes forks in the road as
necessary to reach the destination. When Full Self-Driving (Beta) makes any such maneuver, the instrument
clustertouchscreen displays a message to inform you of the action being taken.
Like Autosteer and Traffic-Aware Cruise Control, Full Self-Driving (Beta) maintains your speed and following distance from the
vehicle ahead of CybertruckModel SModel XModel 3Model Y, if there is one. Full Self-Driving (Beta) also slows down and
stops at traffic lights and stop signs as necessary, and reacts to pedestrians, cyclists, and other vehicles on the road.
WARNING: NEVER make assumptions and predict when and where Full Self-Driving (Beta) will stop or continue through
an intersection or road marking. From a driver's perspective, the behavior of Full Self-Driving (Beta) may appear
inconsistent. Always pay attention to the roadway and be prepared to take immediate action. It is the driver's
responsibility to determine whether to stop or continue through an intersection. Never depend on Full Self-Driving
(Beta) to determine when it is safe and/or appropriate to stop or continue through an intersection.
For example, if you are driving on a residential street and another vehicle backs out of a driveway ahead of
CybertruckModel SModel XModel 3Model Y, Full Self-Driving (Beta) slows down or stops as appropriate. If the other vehicle
stops backing out while partially blocking the driving lane, Full Self-Driving (Beta) slows down and maneuvers around the
other vehicle if the width of the lane allows it.
To tell Full Self-Driving (Beta) to change lanes while on a multi-lane roadway, engage the right or left turn signal. On city or
residential streets, engaging the right or left turn signal tells Full Self-Driving (Beta) to make a right or left turn, respectively.
Full Self-Driving (Beta) notifies you at the top of the visualization as it takes actions. For example, if Full Self-Driving (Beta) is
moving CybertruckModel SModel XModel 3Model Y into a faster lane, it displays the message Changing lanes into faster lane /
Use turn signal to cancel.
Owner's Manual

601

Owners Manual
Or, if Full Self-Driving (Beta) is changing lanes to follow the navigation route, Changing lanes to follow route / Use turn signal to
cancel.
Unlike Navigate on Autopilot, Full Self-Driving (Beta) does not require confirmation before a lane change. To cancel a lane
change or turn, cancel the turn signal or intervene with the steering wheelsteering yoke (or steering wheel) or other vehicle
controls.