NHTSA ID Number: 11001927
Manufacturer Communication Number: 2024.14_0524.pdf
TSB/Document Date: 2024-06-20
Summary
Tesla
does not provide physical owner's manual copies. Instead, all available owner’s manual content is integrated into the vehicle software, and only the content relevant for a given vehicle, based on vehicle configuration and software version installed, is displayed on its touchscreen. This file contains all available owner’s manual content for the vehicle converted to PDF format, and given the distribution method and NHTSA’s submission format requirements, it is the best available representative copy of owner’s manual content. However, a customer who accesses the owner’s manual via their vehicle’s touchscreen would only see the parts of this PDF file that are relevant to their vehicle.
The high beam headlights can automatically switch to low beam when there is light detected in front of
CybertruckModel SModel XModel 3Model Y (for example, from an oncoming vehicle). To turn this feature on or off, touch
Controls > Auto High Beam or Controls > Lights > Auto High Beam.
NOTE: Your chosen setting is retained until you manually change it.
NOTE: Auto High Beam is automatically enabled when Autosteer is engaged.
In situations where high beams are turned off because Auto High Beam is turned on and light is detected in front of
CybertruckModel SModel XModel 3Model Y, you can temporarily turn on high beams by pulling the stalk all the way toward
you.
The following indicator lights are visible on the instrument panel to show the status of the headlights:
Owner's Manual
437
Owners Manual
Low beam headlights are on.
High beam headlights are on. Illuminates when high beams are on but the Auto High Beam setting is turned off
or if the Auto High Beam setting is turned on but is temporarily unavailable.
High beams are currently turned on, and Auto High Beam is ready to turn off the high beams if light is detected
in front of CybertruckModel SModel XModel 3Model Y.
High beams are temporarily turned off because Auto High Beam is operating and light is detected in front of
CybertruckModel SModel XModel 3Model Y. When light is no longer detected, high beam headlights
automatically turn back on.
WARNING: Auto High Beam is a convenience only and is subject to limitations. It is the driver's responsibility to make
sure that headlights are always appropriately adjusted for weather conditions and driving circumstances.
Rear Reading Lights
CybertruckModel SModel XModel 3Model Y is equipped with a reading light on each side of the rear seats, located above the
door and next to the coat hangers (see Coat Hangers on page 194). To turn a reading light on or off, press its lens. If you leave
a reading light turned on, it automatically turns off when CybertruckModel SModel XModel 3Model Y powers off.
Adaptive Front Lighting System (AFS)
If equipped, the Adaptive Front Lighting System (AFS) automatically adjusts the beam of the headlights to improve your
driving view. Electric sensors measure driving speed, steering angle and yaw (the rotation of the car around the vertical axis)
to determine the optimum position of the headlights based on current driving conditions. For example, to improve visibility
while driving on winding roads at night, the AFS casts the beam in the direction of the curve. When low beam headlights are
turned on and when driving at lower speeds, AFS improves lateral illumination to increase the visibility of pedestrians and
curbs, and to improve visibility when turning at a dark intersection, into a driveway, or when making a u-turn.
The Adaptive Front Lighting System (AFS) operates whenever headlights are on. If CybertruckModel SModel XModel 3Model
Y isn't moving, or is moving in reverse, the adaptive headlights do not activate. This prevents the headlights from inadvertently
blinding other drivers.
If the AFS fails, the instrument panel displays an alert. Contact Tesla Service.
Adaptive Front Lighting System (AFS)
If equipped, the Adaptive Front Lighting System (AFS) automatically adjusts the beam of the headlights to improve your
driving view. Electric sensors measure driving speed, steering angle and yaw (the rotation of the car around the vertical axis)
to determine the optimum position of the headlights based on current driving conditions. For example, to improve visibility
while driving on winding roads at night, the AFS casts the beam in the direction of the curve. When low beam headlights are
turned on and when driving at lower speeds, AFS improves lateral illumination to increase the visibility of pedestrians and
curbs, and to improve visibility when turning at a dark intersection, into a driveway, or when making a u-turn.
438
Owner's Manual
Owners Manual
If the AFS fails, the instrument panel displays an alert. Contact Tesla Service.
Adaptive Front Lighting System (AFS)
If equipped, the Adaptive Front Lighting System (AFS) automatically adjusts the beam of the headlights to improve your
driving view. Electric sensors measure driving speed, steering angle and yaw (the rotation of the car around the vertical axis)
to determine the optimum position of the headlights based on current driving conditions. For example, to improve visibility
while driving on winding roads at night, the AFS casts the beam in the direction of the curve. When low beam headlights are
turned on and when driving at lower speeds, AFS improves lateral illumination to increase the visibility of pedestrians and
curbs, and to improve visibility when turning at a dark intersection, into a driveway, or when making a u-turn.
The Adaptive Front Lighting System (AFS) operates whenever headlights are on. If CybertruckModel SModel XModel 3Model
Y isn't moving, or is moving in reverse, the adaptive headlights do not activate. This prevents the headlights from inadvertently
blinding other drivers.
If the AFS fails, the instrument panel displays an alert. Contact Tesla Service.
Headlight Adjustments
To adjust the angle of the headlights, touch Controls > Service > Adjust Headlights, then follow the onscreen instructions. You
can choose which headlight you would like to adjust by selecting it on the touchscreen.
NOTE: Headlights do not require adjustments when temporarily driving into a region where the traffic direction is different (for
example, driving in right-hand traffic region, and then driving into a region with left-hand traffic).
WARNING: Proceed with caution when adjusting headlights. Tesla has carefully calibrated the position of the headlights
to be in an optimum position for most driving scenarios. Tesla recommends that you do not adjust headlights unless you
are familiar with how headlights should be adjusted. Once adjusted, you will be unable to automatically restore them to
their originally calibrated position. Contact Tesla for assistance when adjusting headlights.
Turn Signals
Move the turn signal stalk up (before turning right) or down (before turning left). The turn signals flash three times or
continuously, depending on how far up or down you move the stalk. Lightly push the stalk up or down for a three-flash
sequence. For a continuous signal, push the stalk fully up or down.
The turn signals stop operating when canceled by the steering wheelsteering yoke (or steering wheel), or when you return the
stalk to the central position.
Owner's Manual
439
Owners Manual
When a turn signal is operating, the corresponding turn signal indicator lights up on the instrument panel and a
clicking sound can be heard.
WARNING: When actively using Traffic-Aware Cruise Control, engaging a turn signal can cause
CybertruckModel SModel XModel 3Model Y to accelerate in specific situations (see Overtake Acceleration on page
568Overtake Acceleration on page 577).
WARNING: When actively using Autosteer, engaging a turn signal can cause CybertruckModel SModel XModel 3Model
Y to change lanes (see Auto Lane Change on page 585).
Turn Signals
To engage a turn signal, press the corresponding arrow button on the left side of the steering wheelsteering yoke (or steering
wheel). A turn signal cancels based on the angle of the steering wheelsteering yoke (or steering wheel) (for example, you
finish making a turn). You can also cancel a turn signal by pressing the turn signal button a second time.
If Controls > Lights > Automatic Turn Signals is set to Auto Cancel, turn signals cancel automatically when
CybertruckModel SModel XModel 3Model Y detects completion of a maneuver such as a merge, lane change, or a fork in the
roadway. You can override automatic cancellation at any time (for example, you want the turn signal to remain on because you
are making more than one lane change). To override, engage the turn signal by pressing and momentarily holding the turn
signal button (instead of just pressing). Then, when the first maneuver is complete, the turn signal remains on. If Automatic
Turn Signals is set to Off, you must cancel the turn signal manually by pressing the turn signal button after maneuvers such as
a merge, lane change, or fork in the roadway.
When a turn signal is operating, the corresponding indicator lights up on the touchscreen and you can hear a
clicking sound.
440
Owner's Manual
Owners Manual
Turn Signals
To engage a turn signal, press the corresponding arrow button on the left side of the steering wheelsteering yoke (or steering
wheel). A turn signal cancels based on the angle of the steering wheelsteering yoke (or steering wheel) (for example, you
finish making a turn). You can also cancel a turn signal by pressing the turn signal button a second time.
If Controls > Lights > Automatic Turn Signals is set to Auto Cancel, turn signals cancel automatically when
CybertruckModel SModel XModel 3Model Y detects completion of a maneuver such as a merge, lane change, or a fork in the
roadway. You can override automatic cancellation at any time (for example, you want the turn signal to remain on because you
are making more than one lane change). To override, engage the turn signal by pressing and momentarily holding the turn
signal button (instead of just pressing). Then, when the first maneuver is complete, the turn signal remains on. If Automatic
Turn Signals is set to Off, you must cancel the turn signal manually by pressing the turn signal button after maneuvers such as
a merge, lane change, or fork in the roadway.
When a turn signal is operating, the corresponding indicator lights up on the instrument panel and you can hear
a clicking sound.
Hazard Warning Flashers
To turn on the hazard warning flashers, press the button located on the side of the touchscreen closest to the steering
wheelsteering yoke (or steering wheel). All turn signals flash. Press again to turn off.
To turn on the hazard warning flashers, press the button on the drive mode selector located at the front of the center console.
All turn signals flash. Press again to turn off.
Owner's Manual
441
Owners Manual
To turn on the hazard warning flashers, press the button on the drive mode selector located on the overhead center. All turn
signals flash. Press again to turn off.
If a severe crash is detected by your vehicle, the hazard warning flashers will automatically turn on and flash quickly to
increase visibility. Pressing the hazard warning flashers once will return the lights to their normal cadence. Pressing a second
time turns all hazard warning flashers off.
NOTE: Hazard warning flashers operate even without a key nearby.
Condensation in Head or Tail Lights
Due to weather changes, humidity levels, or recent exposure to water (such as a car wash), condensation may occasionally
accumulate in your vehicle’s head or tail lights. This is normal— as the weather gets warmer and humidity decreases,
condensation often disappears on its own. If you notice water buildup within the exterior lenses, or if the condensation affects
the visibility of the exterior lights, contact Tesla Service.
442
Owner's Manual
Owners Manual
Lights
Controlling Lights
Touch Controls > Lights to control the lights.
NOTE: You can also access an abbreviated lights menu while driving by touching the High Beam button on the steering
wheelsteering yoke (or steering wheel). A lights menu displays on the touchscreen, providing quick access to headlight
controls.
NOTE: You can also access an abbreviated lights menu while driving by touching the High Beam button on the steering
wheelsteering yoke (or steering wheel). A lights menu displays on the touchscreen, providing quick access to headlight
controls.
In addition to the lights that you can control from the touchscreen, CybertruckModel SModel XModel 3Model Y has
convenience lights that turn on and off automatically based on what you are doing. For example, interior lights, marker lights,
tail lights, door handle lights, and puddle lights turn on when you unlock CybertruckModel SModel XModel 3Model Y, when
you open a door, and when you shift into Park. They turn off automatically after a minute or two or when you shift or lock
CybertruckModel SModel XModel 3Model Y.
Exterior Lights
Exterior lights (headlights, tail lights, side marker lights, parking lights, and license plate lights) are set to Auto each time you
start CybertruckModel SModel XModel 3Model Y. When set to Auto, exterior lights automatically turn on when driving in low
lighting conditions, or whenever the wipers are active. If you change to a different setting, lights always revert to Auto on your
next drive.
Touch one of these options to change and retain the exterior light setting until adjusted again or the next time you drive:
• Off: Exterior lights turn off. When driving, daytime running lights may remain on based on regulations in various market
regions.
• Parking: Parking lights, side marker lights, tail lights and license plate lights turn on.
• On: Low beam headlights, side marker lights, parking lights, tail lights, and license plate lights turn on.
CAUTION: Ensure the headlights and rear lights are on during low visibility conditions (for example, when it is dark,
foggy, snowy, or the road is wet, etc.). The rear tail lights are off while daytime running lights are on. Failure to do so can
cause damage or serious injury.
NOTE: Headlights do not require adjustments when temporarily driving into a region where the traffic direction is different (for
example, driving in right-hand traffic region, and then driving into a region with left-hand traffic).
NOTE: To comply with local traffic regulations when crossing from a left-hand traffic region to a right-hand traffic region, and
vice versa, headlights should be adjusted. If you plan to drive to a region that requires headlights to be adjusted, schedule a
service appointment using the mobile app.
NOTE: For vehicles manufactured prior to approximately June 2023: To comply with local traffic regulations when crossing
from a left-hand traffic region to a right-hand traffic region, and vice versa, headlights should be adjusted. If you plan to drive
to a region that requires headlights to be adjusted, schedule a service appointment using the mobile app.
NOTE: For vehicles manufactured as of approximately June 2023: Headlights do not require adjustments when temporarily
driving into a region where the traffic direction is different (for example, driving in right-hand traffic region, and then driving
into a region with left-hand traffic).
Fog Lights
If equipped, touch to turn the fog lights on or off. Fog lights operate only when low beam headlights are on. When headlights
are turned off, fog lights also turn off.
The rear fog indicator displays on the instrument panel whenever rear fog lights (if equipped) are on.
Owner's Manual
443
Owners Manual
The front fog indicator displays on the instrument panel whenever the optional front fog lights are on.
NOTE: Depending on the market region and vehicle options, your vehicle may not be equipped with front and/or rear fog lights.
NOTE: In some regions, there is no control for the front fog lights. They operate in conjunction with the headlights and turn on
only in situations where low beam headlights are on.
Dome Lights
Turn the interior dome (map) lights on or off. If set to Auto, all interior dome lights turn on when you unlock
CybertruckModel SModel XModel 3Model Y, open a door upon exiting, or shift into Park.
You can also manually turn an individual dome light on or off by touching its lens. If you turn a dome light on, it turns off when
CybertruckModel SModel XModel 3Model Y powers off. If CybertruckModel SModel XModel 3Model Y was already powered
off when you manually turned the light on, it turns off after 60 minutes.
Ambient Lights
When enabled, interior ambient lights turn on whenever the headlights are on.
Accent Lights
Enable or disable the accent lights that line the cabin of your vehicle and customize the accent light color to your preferences
(if equipped). You can also turn the footwell lights on or off.
Headlights after Exit
When you stop driving and park CybertruckModel SModel XModel 3Model Y in low lighting conditions, exterior lights
temporarily remain illuminated. They automatically turn off after one minute or when you lock
CybertruckModel SModel XModel 3Model Y whichever comes first.
NOTE: If you lock CybertruckModel SModel XModel 3Model Y using the Tesla mobile app or key cardor key fob, the
headlights immediately turn off. However, if the vehicle locks because Walk-Away Door Lock is enabled (see Walk-Away Door
Lock on page 141Walk-Away Door Lock on page 155), the headlights automatically turn off after one minute.
To turn this feature on and off, touch Controls > Lights > Headlights After Exit. When Headlights After Exit is off, the headlights
turn off immediately when you engage Park and open a door.
NOTE: Model S has lights along the rim of the headlights, also referred to as "signature" lights. These lights automatically turn
on whenever Model S is powered on and a drive mode is engaged.
444
Owner's Manual
Owners Manual
High Beam Headlights
Use the high beam headlight button on the left side of the steering wheelsteering yoke (or steering wheel) to control the
headlights:
• Press and quickly release to flash high beam headlights.
• Press and hold to turn on high beam headlights - touchscreen displays a brief timer and you must hold for the duration of
the timer to latch the high beam headlights to the on position. When headlights are on, press the button a second time to
turn them off.
Auto High Beam (if equipped)
The high beam headlights can adapt based on light detected in front of Model 3 (for example, from an oncoming vehicle). To
turn this feature on or off, touch Controls > Lights > Auto High Beam. Your chosen setting is retained until you manually change
it.
NOTE: When you touch or press the high beam headlight button on the left side of the steering wheelsteering yoke (or steering
wheel), the touchscreen displays an abbreviated lights menu to provide quick access to control headlights, fog lights (if
equipped), and the Auto High Beam setting. Use the touchscreen to choose options from this menu.
NOTE: Auto High Beam is automatically enabled when Autosteer is engaged. To switch to low beam headlights, press the high
beam headlight button on the steering wheelsteering yoke (or steering wheel). Auto High Beam is re-enabled every time
Autosteer is activated.
The following indicator lights are visible on the touchscreen to show the status of the headlights:
Low beam headlights are on.
Owner's Manual
445
Owners Manual
Illuminates when high beams are on but the Auto High Beam setting is turned off or if the Auto High Beam
setting is turned on but is temporarily unavailable.
High beams are currently turned on, and Auto High Beam is ready to turn off the high beams if light is detected
in front of CybertruckModel SModel XModel 3Model Y.
High beams are temporarily turned off because Auto High Beam is operating and light is detected in front of
CybertruckModel SModel XModel 3Model Y. When light is no longer detected, high beam headlights
automatically turn back on.
WARNING: Auto High Beam is a convenience only and is subject to limitations. It is the driver's responsibility to make
sure that headlights are always appropriately adjusted for weather conditions and driving circumstances.
High Beam Headlights
Use the high beam headlight button on the left side of the steering wheelsteering yoke (or steering wheel) to control the
headlights:
• Press and quickly release to flash high beam headlights.
• Press and hold to turn on high beam headlights - the instrument panel displays a brief timer and you must hold for the
duration of the timer to latch the high beam headlights to the on position. When headlights are on, press the button a
second time to turn them off.
Auto High Beam (if equipped)
The high beam headlights can adapt based on light detected in front of the vehicle (for example, from an oncoming vehicle).
To turn this feature on or off, touch Controls > Lights > Auto High Beam. Your chosen setting is retained until you manually
change it.
NOTE: When you touch or press the high beam headlight button on the left side of the steering wheelsteering yoke (or steering
wheel), the touchscreen displays an abbreviated lights menu to provide quick access to control headlights, fog lights (if
equipped), and the Auto High Beam setting. Use the touchscreen to choose options from this menu.
NOTE: Auto High Beam is automatically enabled when Autosteer is engaged. To switch to low beam headlights, press the high
beam headlight button on the steering wheelsteering yoke (or steering wheel). Auto High Beam is re-enabled every time
Autosteer is activated.
446
Owner's Manual
Owners Manual
The following indicator lights are visible on the instrument panel to show the status of the headlights:
Low beam headlights are on.
High beam headlights are on. Illuminates when high beams are on but the Auto High Beam setting is turned off
or if the Auto High Beam setting is turned on but is temporarily unavailable.
High beams are currently turned on, and Auto High Beam is ready to turn off the high beams if light is detected
in front of the vehicle.
High beams are temporarily turned off because Auto High Beam is operating and light is detected in front of
your vehicle. When light is no longer detected, high beam headlights automatically turn back on.
WARNING: Auto High Beam is a convenience only and is subject to limitations. It is the driver's responsibility to make
sure that headlights are always appropriately adjusted for weather conditions and driving circumstances.
High Beam Headlights
Push the turn signal stalk away from you to turn the high beam headlights on continuously. To cancel, pull the stalk towards
you.
To briefly flash the high beam headlights, pull the stalk towards you.
The high beam headlights can automatically switch to low beam when there is light detected in front of
CybertruckModel SModel XModel 3Model Y (for example, from an oncoming vehicle). To turn this feature on or off, touch
Controls > Auto High Beam or Controls > Lights > Auto High Beam.
NOTE: Your chosen setting is retained until you manually change it.
NOTE: Auto High Beam is automatically enabled when Autosteer is engaged.
In situations where high beams are turned off because Auto High Beam is turned on and light is detected in front of
CybertruckModel SModel XModel 3Model Y, you can temporarily turn on high beams by pulling the stalk all the way toward
you.
The following indicator lights are visible on the instrument panel to show the status of the headlights:
Owner's Manual
447
Owners Manual
Low beam headlights are on.
High beam headlights are on. Illuminates when high beams are on but the Auto High Beam setting is turned off
or if the Auto High Beam setting is turned on but is temporarily unavailable.
High beams are currently turned on, and Auto High Beam is ready to turn off the high beams if light is detected
in front of CybertruckModel SModel XModel 3Model Y.
High beams are temporarily turned off because Auto High Beam is operating and light is detected in front of
CybertruckModel SModel XModel 3Model Y. When light is no longer detected, high beam headlights
automatically turn back on.
WARNING: Auto High Beam is a convenience only and is subject to limitations. It is the driver's responsibility to make
sure that headlights are always appropriately adjusted for weather conditions and driving circumstances.
Rear Reading Lights
CybertruckModel SModel XModel 3Model Y is equipped with a reading light on each side of the rear seats, located above the
door and next to the coat hangers (see Coat Hangers on page 194). To turn a reading light on or off, press its lens. If you leave
a reading light turned on, it automatically turns off when CybertruckModel SModel XModel 3Model Y powers off.
Adaptive Front Lighting System (AFS)
If equipped, the Adaptive Front Lighting System (AFS) automatically adjusts the beam of the headlights to improve your
driving view. Electric sensors measure driving speed, steering angle and yaw (the rotation of the car around the vertical axis)
to determine the optimum position of the headlights based on current driving conditions. For example, to improve visibility
while driving on winding roads at night, the AFS casts the beam in the direction of the curve. When low beam headlights are
turned on and when driving at lower speeds, AFS improves lateral illumination to increase the visibility of pedestrians and
curbs, and to improve visibility when turning at a dark intersection, into a driveway, or when making a u-turn.
The Adaptive Front Lighting System (AFS) operates whenever headlights are on. If CybertruckModel SModel XModel 3Model
Y isn't moving, or is moving in reverse, the adaptive headlights do not activate. This prevents the headlights from inadvertently
blinding other drivers.
If the AFS fails, the instrument panel displays an alert. Contact Tesla Service.
Adaptive Front Lighting System (AFS)
If equipped, the Adaptive Front Lighting System (AFS) automatically adjusts the beam of the headlights to improve your
driving view. Electric sensors measure driving speed, steering angle and yaw (the rotation of the car around the vertical axis)
to determine the optimum position of the headlights based on current driving conditions. For example, to improve visibility
while driving on winding roads at night, the AFS casts the beam in the direction of the curve. When low beam headlights are
turned on and when driving at lower speeds, AFS improves lateral illumination to increase the visibility of pedestrians and
curbs, and to improve visibility when turning at a dark intersection, into a driveway, or when making a u-turn.
448
Owner's Manual
Owners Manual
If the AFS fails, the instrument panel displays an alert. Contact Tesla Service.
Adaptive Front Lighting System (AFS)
If equipped, the Adaptive Front Lighting System (AFS) automatically adjusts the beam of the headlights to improve your
driving view. Electric sensors measure driving speed, steering angle and yaw (the rotation of the car around the vertical axis)
to determine the optimum position of the headlights based on current driving conditions. For example, to improve visibility
while driving on winding roads at night, the AFS casts the beam in the direction of the curve. When low beam headlights are
turned on and when driving at lower speeds, AFS improves lateral illumination to increase the visibility of pedestrians and
curbs, and to improve visibility when turning at a dark intersection, into a driveway, or when making a u-turn.
The Adaptive Front Lighting System (AFS) operates whenever headlights are on. If CybertruckModel SModel XModel 3Model
Y isn't moving, or is moving in reverse, the adaptive headlights do not activate. This prevents the headlights from inadvertently
blinding other drivers.
If the AFS fails, the instrument panel displays an alert. Contact Tesla Service.
Headlight Adjustments
To adjust the angle of the headlights, touch Controls > Service > Adjust Headlights, then follow the onscreen instructions. You
can choose which headlight you would like to adjust by selecting it on the touchscreen.
NOTE: Headlights do not require adjustments when temporarily driving into a region where the traffic direction is different (for
example, driving in right-hand traffic region, and then driving into a region with left-hand traffic).
WARNING: Proceed with caution when adjusting headlights. Tesla has carefully calibrated the position of the headlights
to be in an optimum position for most driving scenarios. Tesla recommends that you do not adjust headlights unless you
are familiar with how headlights should be adjusted. Once adjusted, you will be unable to automatically restore them to
their originally calibrated position. Contact Tesla for assistance when adjusting headlights.
Turn Signals
Move the turn signal stalk up (before turning right) or down (before turning left). The turn signals flash three times or
continuously, depending on how far up or down you move the stalk. Lightly push the stalk up or down for a three-flash
sequence. For a continuous signal, push the stalk fully up or down.
The turn signals stop operating when canceled by the steering wheelsteering yoke (or steering wheel), or when you return the
stalk to the central position.
Owner's Manual
449
Owners Manual
When a turn signal is operating, the corresponding turn signal indicator lights up on the instrument panel and a
clicking sound can be heard.
WARNING: When actively using Traffic-Aware Cruise Control, engaging a turn signal can cause
CybertruckModel SModel XModel 3Model Y to accelerate in specific situations (see Overtake Acceleration on page
568Overtake Acceleration on page 577).
WARNING: When actively using Autosteer, engaging a turn signal can cause CybertruckModel SModel XModel 3Model
Y to change lanes (see Auto Lane Change on page 585).
Turn Signals
To engage a turn signal, press the corresponding arrow button on the left side of the steering wheelsteering yoke (or steering
wheel). A turn signal cancels based on the angle of the steering wheelsteering yoke (or steering wheel) (for example, you
finish making a turn). You can also cancel a turn signal by pressing the turn signal button a second time.
If Controls > Lights > Automatic Turn Signals is set to Auto Cancel, turn signals cancel automatically when
CybertruckModel SModel XModel 3Model Y detects completion of a maneuver such as a merge, lane change, or a fork in the
roadway. You can override automatic cancellation at any time (for example, you want the turn signal to remain on because you
are making more than one lane change). To override, engage the turn signal by pressing and momentarily holding the turn
signal button (instead of just pressing). Then, when the first maneuver is complete, the turn signal remains on. If Automatic
Turn Signals is set to Off, you must cancel the turn signal manually by pressing the turn signal button after maneuvers such as
a merge, lane change, or fork in the roadway.
When a turn signal is operating, the corresponding indicator lights up on the touchscreen and you can hear a
clicking sound.
450
Owner's Manual
Owners Manual
Turn Signals
To engage a turn signal, press the corresponding arrow button on the left side of the steering wheelsteering yoke (or steering
wheel). A turn signal cancels based on the angle of the steering wheelsteering yoke (or steering wheel) (for example, you
finish making a turn). You can also cancel a turn signal by pressing the turn signal button a second time.
If Controls > Lights > Automatic Turn Signals is set to Auto Cancel, turn signals cancel automatically when
CybertruckModel SModel XModel 3Model Y detects completion of a maneuver such as a merge, lane change, or a fork in the
roadway. You can override automatic cancellation at any time (for example, you want the turn signal to remain on because you
are making more than one lane change). To override, engage the turn signal by pressing and momentarily holding the turn
signal button (instead of just pressing). Then, when the first maneuver is complete, the turn signal remains on. If Automatic
Turn Signals is set to Off, you must cancel the turn signal manually by pressing the turn signal button after maneuvers such as
a merge, lane change, or fork in the roadway.
When a turn signal is operating, the corresponding indicator lights up on the instrument panel and you can hear
a clicking sound.
Hazard Warning Flashers
To turn on the hazard warning flashers, press the button located on the side of the touchscreen closest to the steering
wheelsteering yoke (or steering wheel). All turn signals flash. Press again to turn off.
To turn on the hazard warning flashers, press the button on the drive mode selector located at the front of the center console.
All turn signals flash. Press again to turn off.
Owner's Manual
451
Owners Manual
To turn on the hazard warning flashers, press the button on the drive mode selector located on the overhead center. All turn
signals flash. Press again to turn off.
If a severe crash is detected by your vehicle, the hazard warning flashers will automatically turn on and flash quickly to
increase visibility. Pressing the hazard warning flashers once will return the lights to their normal cadence. Pressing a second
time turns all hazard warning flashers off.
NOTE: Hazard warning flashers operate even without a key nearby.
Condensation in Head or Tail Lights
Due to weather changes, humidity levels, or recent exposure to water (such as a car wash), condensation may occasionally
accumulate in your vehicle’s head or tail lights. This is normal— as the weather gets warmer and humidity decreases,
condensation often disappears on its own. If you notice water buildup within the exterior lenses, or if the condensation affects
the visibility of the exterior lights, contact Tesla Service.
452
Owner's Manual
Owners Manual
Wipers and Washers
Wipers and Washers
You can access wiper settings by touching the wiper button on the steering wheelsteering yoke (or steering wheel).
• Press the wiper button to wipe the windshield. If the wiper is already operating at a wiper setting and is not set to Auto,
pressing the wiper button cycles through speeds. Wiper speeds cycle as follows: I > II > III > IIII > III > II > I.
• Press and hold the wiper button to spray washer fluid onto the windshield. After releasing the button, the wipers perform
two additional wipes then, depending on vehicle and environmental conditions, a third wipe a few seconds later. You can
also press and hold the wiper button for a continuous spray of washer fluid—the wipers perform the wipes after you
release.
You can also access wiper settings by touching Controls > Wipers.
Whenever you press the wiper button, the instrument panel displays the wiper menu, allowing you to adjust wiper settings.
Roll the left scroll button on the steering wheelsteering yoke (or steering wheel) up or down to choose your desired setting.
1. Turn the wipers off.
2. Choose how you want the wipers to operate:
◦ IIII - Continuous, fast.
◦ III - Continuous, slow.
◦ II - Intermittent, fast.
◦ I - Intermittent, slow.
◦ Auto - CybertruckModel SModel XModel 3Model Y detects precipitation and adjusts the wiping speed and intensity.
Owner's Manual
453
Owners Manual
NOTE: When you engage Autosteer the wipers are set to Auto. Although you can change the wiper setting from Auto
while using Autosteer, the wipers once again default to Auto the next time you engage Autosteer.
NOTE: The Auto setting is currently in BETA. If uncertain about using the Auto setting while in the BETA phase, Tesla
recommends operating the wipers manually, as necessary.
NOTE: You can also adjust the windshield wiper speed and frequency using voice commands (see Voice Commands on page
97).
Periodically check and clean the edge of the wiper blades. If a blade is damaged, replace it immediately. For details on
checking and replacing wiper blades, see Windshield Wiper Blades, Jets and Fluid on page 785.
CAUTION: To avoid damaging the hood, ensure that the hood is fully closed before activating the windshield wipers.
CAUTION: Remove ice from the windshield before turning the wipers on. Ice has sharp edges that can damage the
rubber on the wiper blades.
CAUTION: In harsh climates, ensure that the wiper blades are not frozen or adhered to the windshield.
Wipers and Washers
You can access wiper settings by touching the wiper button on the steering wheelsteering yoke (or steering wheel).
• Press the wiper button to wipe the windshield. If the wiper is already operating at a wiper setting and is not set to Auto,
pressing the wiper button cycles through speeds. Wiper speeds cycle as follows: I > II > III > IIII > III > II > I.
• Press and hold the wiper button to spray washer fluid onto the windshield. After releasing the button, the wipers perform
two additional wipes then, depending on vehicle and environmental conditions, a third wipe a few seconds later. You can
also press and hold the wiper button for a continuous spray of washer fluid—the wipers perform the wipes after you
release.
You can also access wiper settings by touching Controls > Wipers.
Whenever you press the wiper button on the steering wheel, the touchscreen displays the wiper menu, allowing you to adjust
wiper settings. Roll the left scroll button on the steering wheelsteering yoke (or steering wheel) up or down to choose your
desired setting.
454
Owner's Manual
Owners Manual
1. Turn the wipers off.
2. Choose how you want the wipers to operate:
◦ IIII - Continuous, fast.
◦ III - Continuous, slow.
◦ II - Intermittent, fast.
◦ I - Intermittent, slow.
◦ Auto - CybertruckModel SModel XModel 3Model Y detects precipitation and adjusts the wiping speed and intensity.
NOTE: When you engage Autosteer the wipers are set to Auto. Although you can change the wiper setting from Auto
while using Autosteer, the wipers once again default to Auto the next time you engage Autosteer.
NOTE: The Auto setting is currently in BETA. If uncertain about using the Auto setting while in the BETA phase, Tesla
recommends operating the wipers manually, as necessary.
NOTE: You can also adjust the windshield wiper speed and frequency using voice commands (see Voice Commands on page
97).
Periodically check and clean the edge of the wiper blades. If a blade is damaged, replace it immediately. For details on
checking and replacing wiper blades, see Windshield Wiper Blades, Jets and Fluid on page 785.
CAUTION: To avoid damaging the hood, ensure that the hood is fully closed before activating the windshield wipers.
CAUTION: Remove ice from the windshield before turning the wipers on. Ice has sharp edges that can damage the
rubber on the wiper blades.
CAUTION: In harsh climates, ensure that the wiper blades are not frozen or adhered to the windshield.
Owner's Manual
455
Owners Manual
Wipers
To wipe the windshield, rotate the end of the turn signal stalk away from you. You can rotate to five positions:
• 1st: Off.
• 2nd: Auto with low rain sensitivity.*
• 3rd: Auto with high rain sensitivity.*
• 4th: Continuous, slow.
• 5th: Continuous, fast.
For a single wipe, press and release the end of the stalk.
If the wipers are set to Auto and CybertruckModel SModel XModel 3Model Y detects no liquid on the windshield, the wipers
do not wipe.
*To enable the Auto settings, touch Controls > Vehicle > Autowipers (Beta). When wipers are set to Auto,
CybertruckModel SModel XModel 3Model Y detects whether or not it is raining. The frequency at which they wipe depends
on how much rain is detected on the windshield. When wipers are set to high rain sensitivity, the wipers turn on when
CybertruckModel SModel XModel 3Model Y detects a light mist.
NOTE: When you engage Autosteer the wipers are set to Auto. Although you can change the wiper setting from Auto while
using Autosteer, the wipers once again default to Auto the next time you engage Autosteer.
NOTE: The Auto setting is currently in BETA. If uncertain about using the Auto setting while in the BETA phase, Tesla
recommends operating the wipers manually, as necessary.
NOTE: When you operate the wipers, headlights automatically turn on for approximately one minute (if they are not on
already).
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: 2024.14_0524.pdf
Replacement Service Bulletin Number:
MFR Communication Date: 2024-04-30
MFR Internal Campaign ID/Software Version: 2024.14
Communication Type: Over The Air
NHTSA Components: UNKNOWN OR OTHER
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
- Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
- 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
- Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission, ABS, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
- Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCA
Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU c0ding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations - 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCA AutoAuth: Now supports FCA SGW module for Chrysler, for Jeep, for Dodge (2018+), for Fiat (2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Pr0gramming): Allows for Ford, for Lincoln, and for Mazda ECU pr0gramming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order
- 39+ Services/Resets/Adaptations/Relearns/Calibrations: XTOOL D7S full system car scanner diagnostic tool tackles 99% of common car issues through its 36+ special functions, including Oil Reset, EPB, SAS, BMS, Throttle Reset, Injector C0ding, ABS Bleed, TPMS Reset, Power Balance, etc and also covers specific-vehicle functions like Crank Sensor Relearn, ABS Initialization, Cylinder Power Balance, Fuel Trim Reset, Idle Relearn etc. This car diagnostic scanner enhances efficiency, making repairs and maintenance hassle-free. Tip: DO NOT for All vehicles, please check compatibility first
- Cost-effective ECU C0ding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMW, for Benz and offline for BENZ, for MIT, along with PMI functions for Ford, for Mazda, and for Lincoln. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase
- OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
- 【✅Compared to BOSSCOMM IF742, IF745 Offers Full-System Diagnostics】The BOSSCOMM IF745 car diagnostic scanner is an upgraded model of IF742. In addition to supporting all OBD2 Code Reader functions and 6 reset options (ABS/EPB/SAS/BMS/Oil/Throttle), it expands diagnostics from 4 systems (Check Engine/ABS/SRS/Transmission) to vehicle All systems, including Steering, Suspension, and Body Electronics. This provides deeper, more comprehensive diagnostic capabilities.
- 【✨10 OBD2 Functions】The BOSSCOMM IF745 scan tool’s DTC Lookup instantly translates fault codes into user-friendly explanations, its I/M Readiness feature streamlines emissions testing with a single tap, and Freeze Frame lets you pinpoint the exact moment of a fault for in-depth root-cause diagnosis. Combined with a live data dashboard and advanced diagnostics (O2S, OBMon, EVAP), it delivers comprehensive insights for confident troubleshooting.
- 【✨Deep Diagnostics for All Vehicle System Modules】Beyond code reading/clearing and ECU information retrieval, our all-in-one data stream feature lets you inspect all current fault codes and their locations across the vehicle’s systems. This vehicle code reader helps you turn off dashboard warning lights and perform a comprehensive self-check of your car at home—no more back-and-forth trips to the repair shop or hefty inspection fees.
- 【✨6 Essential Resets: ABS Bleeding, Oil, EPB, SAS, Throttle, BMS】The BOSSCOMM IF745 obd2 scanner diagnostic tool swiftly purges air from brake lines to restore braking sensitivity, fine-tunes maintenance cycles to eliminate false alerts, resolves parking brake issues with one-click control, recalibrates steering sensors for stability, optimizes engine idling/acceleration for smoother performance, and deeply resets battery systems to extend lifespan and range via precise parameter adjustments.❗NOTE: Does NOT support bidirectional control, coding, or programming.
- 【✨10,000+ Car Models, AutoVIN, 13 Languages】The BOSSCOMM IF745 vehicle scanner diagnostic tool covers 73+ global car brands and offers support in 13 languages, making it perfect for DIYers, auto mechanics, or as a thoughtful gift. With a single-click AutoVIN feature, it instantly retrieves vehicle serial numbers, streamlining diagnostics for users globally. This adaptable tool balances user-friendliness with precision, catering to both personal and professional requirements.✅Unsure about compatibility? Compatibility will vary on vehicles' model and year, pls reach us via 📧 [email protected] 📧 before purchase.
This product presentation was made with AAWP plugin.