WARNING: As always, be aware of your vehicle and surroundings before driving. Never rely on Cybertruck to
automatically select a suitable drive mode without confirming the selection before you start to drive.
If Auto Shift out of Park is unavailable, the touchscreen displays a message.
Cybertruck automatically selects a drive mode when:
• Auto Shift out of Park is enabled.
• Cybertruck is in Park.
• The driver's seat belt is fastened.
• The brake pedal is pressed.
• All doors and trunks are closed.
• The drive mode selector on the overhead console is not activated (see Shift Using the Overhead Console on page
97).
• The cameras are free of obstructions (see Cameras on page 27) and Cybertruck has enough input to make a
selection.
NOTE: Cybertruck does not automatically select drive modes in Valet Mode.

Shift Using the Overhead Console
In addition to manually shifting on the touchscreen, you can shift by pressing P, R, N or D located on the overhead
console. In most situations, these buttons are not available until you press one of the buttons to activate it. When
active, the LEDs associated with each button illuminate and when you select P, R, N or D, the associated LED
illuminates.
In situations where the touchscreen is unavailable (for example, experiencing a technical issue), or Cybertruck is in
Valet or Transport Mode, the drive mode selector on the overhead console illuminates automatically and there is no
need to touch it.
NOTE: You can also activate the drive mode selector on the overhead console by simultaneously and briefly pressing
both scroll buttons on the steering wheel. However, if you press and hold both buttons simultaneously, the drive
mode selector activates and the touchscreen restarts (see Restarting the Touchscreen on page 10).
NOTE: The front trunk must be closed to shift using the overhead console.

97

Owner's Manual

Driving

1. Park
2. Reverse
3. Neutral
4. Drive
NOTE: When the touchscreen is available for shifting and you have manually activated the drive mode selector on
the overhead console, the overhead console automatically deactivates if you don't shift after a short amount of time.

Park
To manually shift into Park, press the brake pedal and touch the Park button on the touchscreen's drive mode strip. If
the touchscreen is unavailable, press Park on the drive mode selector located on the overhead console.
Cybertruck automatically shifts into Park to prevent roll-away while driving in low speeds. This happens whenever
you connect a charge cable, unbuckle your seat belt, or open the door while in Drive or Neutral. Ensure the charge
cable is removed, buckle your seat belt, and close the door before shifting out of Park.
Attempting to engage the parking brake above 5 mph (8 km/h) will result in emergency braking (see Braking and
Stopping on page 115).
NOTE: In emergency situations, if the brakes are not functioning properly, you can press and hold the Park button on
the touchscreen's drive mode strip to apply the brakes and remove drive torque while the button is held. Do not use
this method to stop the vehicle unless absolutely necessary.
NOTE: You must always press the brake pedal to shift out of Park.
CAUTION: Cybertruck will not shift out of Park if a charge cable is plugged in, or if the charge port is unable to
determine whether a charging cable is plugged in. In situations when Cybertruck does not shift out of Park,
check the touchscreen for instructions on how to proceed.
WARNING: It is the driver's responsibility to always ensure the vehicle is in Park before exiting. Never rely on
Cybertruck to automatically shift into Park for you.

Owner's Manual

98

Driving
Drive
To manually shift into Drive, swipe up on the drive mode strip located on the touchscreen or, if the touchscreen is
unavailable, press D on the drive mode selector located on the overhead console. You can shift into Drive when
Cybertruck is stopped or moving less than 5 mph (8 km/h) in Reverse.

Reverse
To manually shift into Reverse, swipe down on the drive mode strip located on the touchscreen or, if the touchscreen
is unavailable, press R on the drive mode selector located on the overhead console. You can shift into Reverse when
Cybertruck is stopped or moving less than 5 mph (8 km/h) in Drive.

Neutral
Neutral allows Cybertruck to roll freely when you are not pressing the brake pedal. To shift into Neutral, do any of the
following:
• Open Controls, then press and hold the Neutral icon on the drive mode strip until Cybertruck engages Neutral.
• Choose Neutral from the drive mode selector on the overhead console.
NOTE: You must press the brake pedal to shift out of Neutral if Cybertruck is moving slower than approximately 5
mph (8 km/h).
Cybertruck automatically shifts into Park when you open the driver's door to exit the vehicle unless the vehicle is in
certain modes such as Transport or Car Wash Mode which allows the vehicle to stay in Neutral even when you leave.

Keeping Your Vehicle in Neutral (Transport Mode)
To keep Cybertruck in Neutral when you exit, allowing it to roll freely (for example, pulling onto a flatbed truck), you
must activate Transport mode:
1. Shift into Park.
2. Press the brake pedal.
3. Touch Controls > Service > Towing. The touchscreen displays a message reminding you how to properly transport
Cybertruck.
4. Press the Transport Mode. It turns blue to show that Cybertruck is now in Transport Mode. Cybertruck is now
free-rolling and can slowly be rolled (no faster than walking speed) for short distances or winched (for example,
onto a flatbed truck).
For more information on Transport Mode, see Activate Transport Mode on page 252.
NOTE: In Transport mode, Cybertruck does not shift into a drive mode. You must first cancel Transport mode by
touching Transport Mode again. Transport mode also cancels if you use the touchscreen or drive mode selector on
the overhead console to shift into Park or if you manually apply the parking brake by touching Controls > Safety >
Parking Brake.

99

Owner's Manual

Driving
Steering Wheel
Adjusting the Steering Wheel Position
To adjust the steering wheel, touch Controls and touch the Steering icon.

Use the left scroll button on the steering wheel to move the steering wheel to the desired position:
• To adjust the height/tilt angle of the steering wheel, roll the left scroll button up or down.
• To move the steering wheel closer to you, or further away from you, press the left scroll button to the left or right.
You can also customize what you want the left scroll button to control, such as Climate or Dashcam status. To
customize, hold down the left scroll button and navigate the menu on the touchscreen.
WARNING: Do not make steering wheel adjustments while driving.

Overview of Buttons
Cybertruck features stalkless driving in which all controls you need when driving are accessible on the steering
wheel.

Owner's Manual

100

Driving

Left buttons:
1. Right turn signal (see Turn Signals on page 111)
2. High beam headlights* (see Headlights on page 109)
3. Multi-functional button (non-functional)
4. Left scroll button (see Left Scroll Button on page 102)
5. Left turn signal (see Turn Signals on page 111)

101

Owner's Manual

Driving

Right Buttons:
1. Cameras (see Cameras on page 27)
2. Wiper* (see Windshield Wiper and Washers on page 113)
3. Right scroll button (see Right Scroll Button on page 103)
4. Voice commands (see Voice Commands on page 25)
5. Cruise control indicator (non-functional)
*The behaviors associated with the buttons for headlight high beams (Headlights on page 109) and wiper
(Windshield Wiper and Washers on page 113) vary depending on whether you press or press and hold the button.
NOTE: If you are experiencing issues with the touchscreen (such as a missing feed from the front- or rear-facing
camera), hold down both the left and right scroll buttons simultaneously while Cybertruck is parked to restart it (see
Restarting the Touchscreen on page 10).

Left Scroll Button
Use the left scroll button to adjust the position of the mirrors and steering wheel. The left scroll button also controls
the wiper and media player.

Owner's Manual

102

Driving

• When using media player, push the button to the left to go back to the previous song or station or push it to the
right to skip to the next song or station.
• Roll the scroll button up to increase and down to decrease the volume.
NOTE: The scroll button adjusts the volume for media and phone calls based on what is currently in use. As you
adjust the volume, the touchscreen displays the volume level and whether you are adjusting volume for media or
phone.
• To mute the media volume, or to pause/play an audio file, push the scroll button.
• When adjusting mirrors, push the button to the left/right to move the associated mirror inward/outward and up/
down to position the mirror upward or downward (see Mirrors on page 106).
• When adjusting the position of the steering wheel, roll the button up/down to adjust the tilt/angle and press the
button to the left or right to move the steering wheel closer or further (see Adjusting the Steering Wheel Position
on page 100).
• When a menu displays on the touchscreen from which you can choose options (for example, the wiper controls),
use the scroll button to choose an option (up, down, left, or right) and push the button to confirm your choice.
• For incoming calls, press the scroll button to answer. During the call, press the scroll button again to hang up.

Right Scroll Button
Use the right scroll button to control Autopilot features such as Autosteer and Traffic-Aware Cruise Control:

103

Owner's Manual

Driving

• When driving, push and release the button to engage Autosteer or Traffic-Aware Cruise Control (see Autopilot
Features on page 143). If Autosteer Activation is set to Double Click (touch Controls > Autopilot Activation >
Autosteer Activation), a single push engages Traffic-Aware Cruise Control only and you must the button twice to
engage Autosteer. Once Autosteer or Traffic-Aware Cruise Control is active, pushing the button cancels it.
• When Traffic-Aware Cruise Control or Autosteer is engaged, roll the scroll button up to increase or down to
decrease the set speed, or push the button to the left or right to adjust the distance you want to maintain from a
vehicle traveling ahead of you (see While Using Autopilot on page 146).

Heated Steering Wheel
To warm up the steering wheel, touch the temperature icon on the touchscreen to display climate controls (see
Operating Climate Controls on page 169), then touch the steering wheel icon. When turned on, radiant heat keeps
the steering wheel at a comfortable temperature.
To turn the heated steering wheel off, use the climate controls or the Tesla mobile app (see Mobile App on page 84).

Horn
To sound the horn, press and hold the center pad on the steering wheel.

Owner's Manual

104

Driving

Steer-by-Wire
Cybertruck uses steer-by-wire technology, which means that there is no mechanical connection between the
steering wheel and the wheels. Instead, sensors in the steering column communicate electronically with the steering
rack. As a result, steering Cybertruck feels more responsive and requires less effort from the driver.
Cybertruck also has four-wheel steering. When the driver turns the steering wheel, all four wheels respond. This
gives Cybertruck a tighter turning radius.
Emergency Operation
The steer-by-wire system is controlled by multiple redundant sensors and actuators. In the unlikely case that
Cybertruck detects an issue, an alert displays on the touchscreen and a chime sounds.
NOTE: This alert does not mean that Cybertruck has lost steering, or that the steer-by-wire system has failed. This
alert indicates a possible issue with one of the redundant systems. If this alert persists, schedule a service
appointment.
Once the alert appears, Cybertruck gradually reduces drive torque and you must pull over.
It may be possible to recover the system by performing a vehicle power cycle: Exit the vehicle, close all doors,
reenter the vehicle, and attempt to drive. An override is available for low-speed maneuvering to position the vehicle
for roadside support (see Instructions for Transporters on page 250). Be ready to apply the brake pedal.

105

Owner's Manual

Driving
Mirrors
Adjusting Exterior Mirrors

Adjust the exterior mirrors by touching Controls > Mirrors. Press the left scroll button on the steering wheel to
choose whether you are adjusting the Left or Right mirror. Then, use the left scroll button as follows to adjust the
selected mirror to its desired position:
• To angle the mirror up or down, roll the left scroll button up or down.
• To angle the mirror inward or outward, press the left scroll button to the left or right.

Owner's Manual

106

Driving

You can save your side mirror position in your driver profile for your convenience.
Mirror Auto Tilt automatically tilts mirrors downward when backing up. To turn this feature on or off, touch Controls
> Mirrors > Mirror Auto Tilt. To adjust the auto-tilt position, make mirror adjustments with Cybertruck shifted into
Reverse. When you shift out of Reverse, mirrors tilt back to their normal (upward) position. But now that you have
adjusted them for backing up, they automatically tilt to the selected downward position whenever you shift into
Reverse.
When certain environmental conditions are met, the exterior side mirrors dim automatically (for example, in low light
conditions or to reduce glare when driving at night). To enable or disable this feature, touch Controls > Mirrors >
Mirror Auto Dim.
NOTE: Both exterior mirrors have heaters that can be controlled through Climate.

Folding Mirrors
To manually fold and unfold exterior mirrors (for example, if parking in a narrow garage, tight space, etc.), touch
Controls > Fold/Unfold Mirrors.
Unfold the mirrors by touching Controls > Unfold Mirrors. If the mirrors are still folded when you begin driving, they
will automatically unfold when your speed reaches 31 mph (50 km/h). You cannot fold a mirror when driving over 31
mph (50 km/h).
To set the mirrors to fold automatically whenever you exit and lock Cybertruck touch Controls > Mirrors > Mirror
Auto Fold. The mirrors unfold automatically when you unlock Cybertruck.

107

Owner's Manual

Driving
You can also set mirrors to fold automatically whenever you arrive at a specific location, which saves you from
having to manually fold them each time you arrive at a frequented place. To set up, stop at the location you want to
save (or drive at less than 3 mph (6 km/h)), and fold the mirrors. Touch Save Location when it appears briefly on the
Fold Mirrors control.
If you no longer want mirrors to fold automatically, touch Controls > Unfold Mirrors when they fold at the saved
location, then touch Remove Location.
When you leave the saved location, the mirrors will unfold automatically when your speed reaches 3 mph (6 km/h)
or if you touch Controls > Unfold Mirrors.
CAUTION: Mirrors may not automatically fold if you return to a saved location and are driving faster than 3
mph (6 km/h).
NOTE: You can override the automatic folding/unfolding of mirrors at any time (for example, Cybertruck has no
power) by pushing the mirror assembly away from you to unfold, or pulling it toward you to fold.
NOTE: If you expect ice to accumulate when Cybertruck is parked, turn off Mirror Auto Fold. Accumulation of ice
can prevent exterior side mirrors from folding or unfolding. See Cold Weather Best Practices on page 174 for
information on how to ensure your mirrors function properly in cold weather.
You can integrate auto-folding mirrors with MyQ (see Smart Garage on page 93).

Rear View Mirror

Adjust the rear view mirror manually.

Vanity Mirrors
To expose and illuminate the vanity mirror, fold the sun visor downwards, then use the tab to lower the mirror cover.
The tab can stick to the lower portion of the visor to keep it in place. After closing the mirror cover, the light turns
off. See Sun Visors and Vanity Mirrors on page 41 for more information.

Owner's Manual

108

Driving
Lights
Overview
Cybertruck has convenience lights that automatically turn on and off based on what you are doing. For example,
interior lights, marker lights, signature lights, door handle lights, and puddle lights turn on when you unlock
Cybertruck, when you open a door, and when you shift into Park. They turn off automatically after a minute or two
when you shift out of Park, or when you lock your vehicle.
Touch Controls > Lights to control the lights.
NOTE: You can also access an abbreviated lights menu while driving by touching the headlights button on the
steering wheel. A lights menu displays on the touchscreen, providing quick access to headlight controls.
• Headlights: Exterior lights (headlights, tail lights, signature lights, side marker lights, parking lights, and license
plate lights) are set to Auto each time you start Cybertruck. When set to Auto, exterior lights automatically turn
on when driving in low lighting conditions. If you change to a different setting, lights always revert to Auto on
your next drive.
Touch one of these options to change the exterior light setting until adjusted again or the next time you drive:
◦ Off: Exterior lights turn off. When driving, daytime running lights may remain on based on regulations in
various market regions.
◦ Parking: Parking lights, side marker lights, the tail light bar, and license plate lights turn on.
◦ On: Low beam headlights, side marker lights, parking lights, signature lights, and license plate lights turn on.
• Dome Lights: Turn the interior dome (map) lights on or off. If set to Auto all interior dome lights turn on when
you unlock your vehicle, open a door upon exiting, or shift into Park.
Cybertruck is also equipped with a rear dome light on each side of the rear seats, located next to the coat
hangers (see Coat Hangers on page 74).
NOTE: To manually turn an individual dome light on or off, press the lens. If you leave a dome light on, it turns off
when Cybertruck powers off. If the vehicle was already powered off when you manually turned the light on, it
turns off after 60 minutes.
• Accent Lights: Choose Off, On, or Auto. When set to Auto, interior ambient lights turn on based on sunrise/
sunset, and when Cybertruck is parked. Customize the color of the lights to your preference.
• Footwell Lights: When headlights are enabled, footwell lights illuminate the front and rear footwells. Footwell
lights will also enable when you unlock your vehicle, open a door upon entry/exit, or shift into Park.
• Bed Lights: The lights running on the sides of the truck cargo bed can be set to Off, On, or Auto. When set to
Auto, the bed lights turn on when Cybertruck is parked and the tonneau cover or tailgate is open. You can also
toggle the tailgate button to turn the bed lights on or off for your convenience. See Cargo Bed on page 79 for
more information.
CAUTION: Ensure the headlights and tail lights are On during low visibility conditions (for example, when it is
dark, foggy, snowy, or the road is wet, etc.). The tail lights are off while daytime running lights are on. Failure to
do so can cause damage or serious injury.

Headlights
The following indicator lights are visible on the touchscreen to show the status of the headlights. If none of these
indicator lights are on, the headlights are off.
Low beam headlights are on.

109

Owner's Manual

Driving
The headlights are on. Illuminates when headlights are on but the Auto High Beam setting is turned off
or if the Auto High Beam setting is turned on but is temporarily unavailable.

High beams are currently turned on, and Auto High Beam is ready to turn off the high beams if light is
detected in front of Cybertruck.

High beams are temporarily turned off because Auto High Beam is operating and light is detected in
front of Cybertruck. When light is no longer detected, high beam headlights automatically turn back
on.

Use the headlights button on the left side of the steering wheel to control the headlights:
• Press and quickly release to flash headlights.
• Press and hold to turn on headlights - the touchscreen displays a brief timer and you must hold for the duration
of the timer to latch the headlights to the on position. When headlights are on, press the button a second time to
turn them off.
When you touch or press the headlights button on the left side of the steering wheel, the touchscreen displays an
abbreviated lights menu to provide quick access to control headlights, fog lights (if equipped), and the Auto High
Beam setting. Use the touchscreen to choose options from this menu.

Auto High Beam (if equipped)
The headlights can automatically switch to low beam when there is light detected in front of Cybertruck (for
example, from an oncoming vehicle). To turn this feature on or off, touch Controls > Lights > Auto High Beam. Your
chosen setting is retained until you manually change it.
NOTE: Auto High Beam is automatically enabled when Autosteer is engaged. To switch to low beam headlights,
press the headlights button on the steering wheel. Auto High Beam is re-enabled every time Autosteer is activated.

Owner's Manual

110

Driving
WARNING: Auto High Beam is a convenience only feature and is subject to limitations. It is the driver's
responsibility to make sure that headlights are always appropriately adjusted for weather conditions and
driving circumstances.

Turn Signals
To engage a turn signal, press the corresponding arrow button on the left side of the steering wheel. A turn signal
cancels based on the angle of the steering wheel (for example, you finish making a turn). You can also cancel a turn
signal by pressing the turn signal button a second time.
If Controls > Lights > Automatic Turn Signals is set to Auto Cancel, turn signals cancel automatically when
Cybertruck detects completion of a maneuver such as a merge, lane change, or a fork in the roadway. You can
override automatic cancellation at any time (for example, you want the turn signal to remain on because you are
making more than one lane change). To override, engage the turn signal by pressing and momentarily holding the
turn signal button (instead of just pressing). Then, when the first maneuver is complete, the turn signal remains on. If
Automatic Turn Signals is set to Off, you must cancel the turn signal manually by pressing the turn signal button
after maneuvers such as a merge, lane change, or fork in the roadway.

When a turn signal is operating, the corresponding indicator lights up on the touchscreen and there is a
clicking sound.

Hazard Warning Flashers
To turn on the hazard warning flashers, press the button on the drive mode selector on the overhead console. All
turn signals flash. Press again to turn off.

111

Owner's Manual

Driving

If a severe crash is detected by your vehicle, the hazard lights will automatically turn on and flash quickly to increase
visibility. Pressing the hazard lights once will return the lights to its normal cadence. Pressing a second time turns all
hazard lights off.
NOTE: Hazard warning flashers operate even without a key nearby.

Headlights After Exit
When you stop driving and park Cybertruck in low lighting conditions, exterior lights temporarily remain illuminated.
They automatically turn off after one minute or when you lock Cybertruck, whichever comes first.
To turn this feature on and off, touch Controls > Lights > Headlights After Exit. When Headlights After Exit is off, the
headlights turn off immediately when you engage Park and open a door.

Condensation in Headlights or Tail lights
Due to weather changes, humidity levels, or recent exposure to water (such as a car wash), condensation may
occasionally accumulate in your vehicle’s headlights or tail lights. This is normal— as the weather gets warmer and
humidity decreases, condensation often disappears on its own. If you notice water buildup within the exterior lenses,
or if the condensation affects the visibility of the exterior lights, use the mobile app to schedule a service
appointment.

Owner's Manual

112

Driving
Windshield Wiper and Washers
You can access wiper settings by touching the wiper button on the steering wheel or touching Controls > Wiper.

Press and quickly release the wiper button on the steering wheel to wipe the windshield.
Whenever you press the wiper button, the touchscreen displays the wiper menu, allowing you to adjust wiper
settings. Push the left scroll button on the steering wheel to the left or right to choose your desired setting.
• Turn the wiper off.
• Choose how you want the wiper to operate:
◦ I - Intermittent, slow.
◦ II - Intermittent, fast.
◦ III - Continuous, slow.
◦ IIII - Continuous, fast.
• Touch Hold to spray wiper fluid onto the windshield or press and hold the wiper button on the steering wheel to
spray washer fluid onto the windshield. After releasing the button, the wiper perform two additional wipes then,
depending on vehicle and environmental conditions, a third wipe a few seconds later.
Choose to heat the wiper blade by touching the windshield icon on the touchscreen.

While driving in the rain, the wiper blade may pause in the horizontal position for a minute or two before continuing
to wipe the windshield. The blade may also move slightly based on vehicle speed to make Cybertruck more
aerodynamic.
Periodically check and clean the edge of the wiper blade. If a blade is damaged, replace it immediately. For details
on checking and replacing the wiper blade, see Windshield Wiper Blade, Jets and Fluid on page 226.
NOTE: You can also adjust the windshield wiper speed and frequency using voice commands (see Voice Commands
on page 25).
113

Owner's Manual

Driving
CAUTION: Remove ice from the windshield before turning the wiper on. Ice has sharp edges that can damage
the rubber on the wiper blade. In harsh climates, ensure that the wiper blade is not frozen or adhered to the
windshield.

Owner's Manual

114

Driving
Braking and Stopping
Braking Systems
WARNING: Properly functioning braking systems are critical to ensure safety. If you experience a problem with
the brake pedal, brake calipers, or any component of a Cybertruck braking system, contact Tesla immediately.
Cybertruck has an anti-lock braking system (ABS) that prevents the wheels from locking when you apply brake
pressure. This improves steering control during heavy braking in most road conditions because ABS constantly
monitors the speed of each wheel and varies the brake pressure according to the grip available.
The alteration of brake pressure can be felt as a pulsing sensation through the brake pedal. This demonstrates that
the ABS is operating and is not a cause for concern. Keep firm and steady pressure on the brake pedal while
experiencing the pulsing.
The ABS indicator briefly flashes amber on the touchscreen when you first start Cybertruck. If this
indicator lights up at any other time, an ABS fault has occurred and the ABS is not operating. Contact
Tesla. The braking system remains fully operational and is not affected by an ABS failure. However,
braking distances may increase. Drive cautiously and avoid heavy braking.

If the touchscreen displays this red brake indicator at any time other than briefly when you first start
Cybertruck, a brake system fault is detected, or the level of the brake fluid is low. Contact Tesla
immediately. Apply steady pressure and keep the brake pedal firmly pressed to stop the vehicle when
safe to do so.

The touchscreen displays this amber brake indicator if a brake booster fault is detected. Apply steady
pressure and keep the brake pedal firmly pressed to stop the vehicle when safe to do so. Hydraulic
Boost Compensation will be active (see Hydraulic Boost Compensation on page 116).

Emergency Braking
In an emergency, fully press the brake pedal and maintain firm pressure, even on low traction surfaces. The ABS
varies the braking pressure to each wheel depending on the amount of traction available. This prevents wheels from
locking and ensures that you stop as safely as possible.
If an alternative method is needed to bring the vehicle to a stop, press and hold the Park button on the
touchscreen's drive mode strip to apply the brakes and remove drive torque while the button is held. Touch Controls
or press the brake pedal to display the drive mode strip.
WARNING: Do not pump the brake pedal. Doing so interrupts operation of the ABS and can increase braking
distance.
WARNING: Always maintain a safe distance from the vehicle in front of you and be aware of hazardous driving
conditions. While the ABS can improve stopping distance, it cannot overcome the laws of physics. It also does
not prevent the danger of hydroplaning (where a layer of water prevents direct contact between the tires and
the road).
CAUTION: Automatic Emergency Braking (see Automatic Emergency Braking on page 159) may intervene to
automatically brake in situations where a collision is considered imminent. Automatic Emergency Braking is not
designed to prevent a collision. It is designed to minimize the impact of a frontal collision by attempting to
reduce your driving speed. Depending on Automatic Emergency Braking to avoid a collision can result in
serious injury or death.
CAUTION: In emergency situations, if the brakes are not functioning properly, press and hold the Park button
on the overhead console or touchscreen to bring Cybertruck to a stop. Do not use this method to stop the
vehicle unless absolutely necessary.

115

Owner's Manual

Driving
Brake Disc Wiping
When cold and wet weather is detected, brake disc wiping repeatedly applies an imperceptible amount of brake
force to remove water from the surface of the brake discs.
Hydraulic Boost Compensation
Cybertruck is equipped with a brake booster that activates the brakes when the brake pedal is pressed. Hydraulic
boost compensation provides mechanical assistance if the brake booster fails. If a brake booster failure is detected,
the brake pedal feels stiffer to press and you may hear a sound when you press the brake pedal. To stop Cybertruck,
apply steady force to the brake pedal without releasing or pumping. Drive cautiously and maintain a safe distance
from other road users—brake pedal responsiveness and braking performance may be degraded.
Hydraulic Fade Compensation
Hydraulic fade compensation assists in monitoring brake system pressure and ABS activity for instances of reduced
brake performance. If reduced brake performance is detected (for example, as a result of brake fade, or cold or wet
conditions), you may hear a sound, feel the brake pedal pull away from your foot, and notice a strong increase in
braking. Brake as you normally would and continue to press the brake pedal without releasing or pumping the
brakes.
WARNING: Always maintain a safe driving distance from the vehicle in front of you and exercise caution when
driving conditions are hazardous. Brake disc wiping and hydraulic fade compensation are NOT substitutes for
adequately applying the brakes.

Regenerative Braking
Whenever Cybertruck is moving and your foot is off the accelerator, regenerative braking slows down the vehicle
and feeds any surplus power back to the Battery. By anticipating your stops and reducing or relieving pressure from
the accelerator pedal to slow down, you can take advantage of regenerative braking to increase driving range.
Vehicle deceleration due to regenerative braking may vary depending on the current state of the Battery. For
example, regenerative braking may be limited if the Battery is cold or is already fully charged.
The power meter (a thin vertical line next to the drive mode strip) displays real-time power usage:

1. Shows power being output by the Battery, such as that used to accelerate the vehicle or to cool the cabin. When
you press the accelerator pedal, the top half of the power meter fills with black (or white if the display is dark).

Owner's Manual

116

Driving
2. Represents power generated from regenerative braking, or power that captured from slowing down the vehicle.
Power being fed back to the Battery displays in green whereas power used by the regular braking system displays
in gray.
NOTE: Installing winter tires with aggressive compound and tread design may result in temporarily-reduced
regenerative braking power. However, your vehicle is designed to continuously recalibrate itself, and after changing
tires it will increasingly restore regenerative braking power after some straight-line accelerations. For most drivers
this occurs after a short period of normal driving, but drivers who normally accelerate lightly may need to use
slightly harder accelerations while the recalibration is in progress.
NOTE: If regenerative braking is aggressively slowing Cybertruck (such as when your foot is completely off the
accelerator pedal at highway speeds), the exterior brake lights turn on to alert others that you are slowing down.
WARNING: In snowy or icy conditions, Cybertruck may experience loss of traction during regenerative braking.

Vehicle Hold
When Cybertruck is stopped, Vehicle Hold can continue to apply the brakes even after you remove your foot from
the brake pedal and is automatically enabled any time the vehicle comes to a complete stop.
This indicator displays on the touchscreen whenever Vehicle Hold is actively holding Cybertruck while
stopped.

To disengage Vehicle Hold, press the accelerator or brake pedal, or shift into Neutral.
NOTE: After actively braking Cybertruck for approximately ten minutes, Cybertruck shifts into Park and Vehicle Hold
cancels. The parking brake is still applied. Cybertruck also shifts into Park if it detects that the driver has left the
vehicle.

Parking Brake
The parking brake is automatically engaged when in Park, and automatically disengages when shifted out of Park.
To manually engage the parking brake, touch Controls > Safety > Parking Brake. Follow the onscreen instructions.
Manually disengage the parking brake by selecting Parking Brake again.
When you manually apply the parking brake using the touchscreen, the red parking brake indicator
lights up on the touchscreen.

If the parking brake experiences an electrical issue, the amber parking brake indicator lights up and a
fault message displays on the touchscreen.

NOTE: The parking brake operates on the rear wheels only, and is independent of the pedal-operated brake system.
CAUTION: In the unlikely event that Cybertruck loses electrical power, you cannot access the touchscreen and
are therefore unable to release the parking brake without first jump starting (see Jump Starting on page 260).
WARNING: In snowy or icy conditions the rear wheels may not have sufficient traction to prevent Cybertruck
from sliding down a slope, particularly if not using winter tires. Avoid parking on hills in snowy or icy
conditions. You are always responsible for parking safely.

117