BULLETIN NOTES
This service alert supersedes the previously issued service alert listed below. The changes are noted in Red text.
Previous TSBs:

Date(s) Issued:

SA-009/23

08/28/23, 08/15/23, 07/05/23, 06/12/23, 05/24/23, 04/25/23, 03/28/23, 03/01/23 and 02/06/23

SA-017/22

12/13/22, 10/10/22, 08/25/22, 05/06/22, 04/04/22

SA-013/21

12/22/21, 10/13/21, 09/14/21, 05/11/21,
04/27/21, 03/15/21, 02/22/21, 02/08/21 and 02/02/2021

SA-031/20

12/09/20,11/30/20, 11/06/20, 10/28/20, 06/16/20, 06/05/20, 06/01/20, 05/18/20,
04/14/2020, 04/02/20, 03/11/20 and 02/27/20

APPLICABLE MODEL(S)/VINS:
2019-2024 Mazda3
2020-2024 CX-30
2021-2024 CX-5
2021-2023 CX-9
2022-2023 MX-30
2023-2024 CX-50
2024 CX-90

DESCRIPTION
Some customers may complain about any of the following:
1. Infotainment Center Display does not provide the Authorization Code (OTP) during the MyMazda App
Connected Vehicle enrollment.
2. Remote function(s) inoperative.
•
•
•

Engine Start / Stop
Door Lock / Unlock
Lights ON / OFF

3. MAZDA CONNECT connected vehicle reception strength icon shows "X" or "\".

Page 1 of 40

10/24/2023 09:06 AM tlawrenc

Index
•
•
•
•

MAZDA CONNECT Indication
Remote Engine Start Will Not Function
Remote Engine Start Function Will turn engine OFF
Deactivation Mode

MAZDA CONNECT Indication

Indication

Explanation

Mazda3, CX-30, CX-50, MX-30
Radio waves are not being received.
Move to a location with good reception.

Weak reception.

Good Receptioin

Strong reception.
Currently conducting an operation check of the
communication unit. If this condition continues, consult an
Authorized Mazda Dealer.
Currently conducting an operation check of the onboard
communication unit.
NOTE: Communication is not possible during this display.

CX-5, CX-50, CX-9, MX-30
Mazda3, CX-30 built July 1, 2021 and later

The communication function is temporarily disabled due to
infotainment system setting.

• No CV Contract
• Deactivation Mode
• Connected Service contract has ended
Page 2 of 40

10/24/2023 09:06 AM tlawrenc

(Subscription expired)
• TCU has not been initialized, go to SA-004/21
Vehicles built before July 1, 2021
Customer deactivated Connected Services (Opt-Out)
Vehicles built after July 1, 2021

• eMDCS Warranty Vehicle Inquiry will show
Campaign CSP04 Status Open

Connected Services disabled (box unchecked)

CX-5, CX-50, CX-9, MX-30
Mazda3, CX-30 built July 1, 2021 and later
Connected Services Disabled message
appears at engine start up

Enable Connected Services (box checked) to prevent
message appearing at engine start up.

Note: If customer Opted-Out ( CSP04), advise customer
to keep Connected Services box checked. The vehicle will
not transmit data.
Connected Vehicle Maintenance Mode

Connected Vehicle Maintenance Mode enabled.
Go to MGSS SERVICE CAUTIONS FOR VEHICLES
WITH TELEMATICS COMMUNICATION SYSTEM to
disable Maintenance Mode.
NOTE: Connected Vehicle Maintenance Mode is
unnecessary if the customers vehicle is in
Deactivation Mode .

Page 3 of 40

10/24/2023 09:06 AM tlawrenc

Remote Engine Start Will Not Function under the following conditions
Item
Condition
1

Remote Engine Start function is not available on PHEV (inline 4) models. See SA-038/23

2

Vehicle battery voltage low

3

Automatic Transmission shift position except "P"

4

Vehicles equipped with manual transmission

5

Vehicle speed above 3 mi/h (5 km/h)

6

Brake pedal switch malfunction

7

Engine has been running by remote engine start function

8

Engine started by remote engine start more than 2 consecutive times while the vehicle is not driven.
The vehicle must be driven 1-mile or 24-hours must pass from the last successful Remote Engine
Start for the use count to reset.
2021 Mazda3, 2021 CX-30, CX-50, MX-30: Vehicle's electrical control area network (CAN) is in
"Sleep Mode"

9

or
10 A registered key is detected in the vehicle
11 Brake pedal switch detects brake application
Low fuel warning
12

13

Engine starts, then turns OFF due to abnormal high engine rpm detected. (Engine rotation over
3000 rpm continued for more than 0.2[s])

14

No engine rpm detected after sending engine start request. (Engine rotation 0 rpm continued for
more than 0.2[s])

15 When the CAN data signal for engine shut off is present (e.g.: door ajar signal)
16 After 10 second maximum cranking time
17

Burglar alarm status is "Alarm" and "Alarm stand by" (CAUTION - DO NOT enable, see TheftDeterrent System section in SA-012/20)

18 Room fuse blown/missing
19 Connected Vehicle Maintenance Mode enabled (Restricted Transmitting Mode in MDARS)
Page 4 of 40

10/24/2023 09:06 AM tlawrenc

20

Vehicle is parked (stored) for approximately 1 week or longer or in deep sleep mode.
Drive the vehicle for a few miles to recover.
DTC Stored

21

22 Aftermarket Remote Engine Start accessory installed.
Mazda Remote Engine Start (BCKA-V7-620) accessory installed (No MyMazda app remote engine
start function).
23 Mazda Remote Engine Start (RES) Removal
a. Remove the Mazda Remote Engine Start (RES) accessory module.
b. Deactivate and activate Advanced Key(s). Refer to MGSS IMMOBILIZER SYSTEMRELATED PARTS PROGRAMMING [(US)]
24

First remote control attempt fails, second attempt works fine.
Go to TSB 16-002/20.

25 CSP04 Status Open
Remote Engine Start Function Will turn engine OFF under the following conditions
Item
Condition
1

Vehicle door(s) opened

2

Vehicle trunk opened

3

Vehicle hood opened

4

Ignition switch push button "ON" detected

5

Remote engine STOP request

6

Brake pedal switch detects brake application

7

DTC Stored

8

Engine will stop running automatically after 15 minutes for safety, security and emissions.

Page 5 of 40

10/24/2023 09:06 AM tlawrenc

Deactivation Mode
• Deactivation Mode Temporary Suspension 6/16/2023 (6/11/2023 retail date and later)
• Vehicles retailed before 6/11/2023 and in Deactivation Mode will remain in Deactivation mode.
NOTE:
• Customer/Dealer can activate CV services anytime via MyMazda app
Customer - There might be a slight delay in making the backend connection since it was temporarily
deactivated.
Dealer - Go to Repair Procedure -> TCU Activation
• When TCU is in Deactivation Mode, infotainment Over-the-Air (OTA) Connectivity Master Unit (CMU) software
update is not possible (disabled).
• Prior to Retail Date, the TCU is active.
○

○

Deactivation Mode Status Check:
Reception Icon Shows normal strength

TCU Active

Infotainment
Center
Display

• TCU in
Deactivation
Mode
• No CV
Contract
• One Time
Passcode
(OTP) is
processing

Reception Icon Shows "X"

No CV Contract
TCU CV Contract
Status
Mazda
Connected
Vehicle
Viewer
(MCVV)

1. Go to Mazda
Connected Vehicle
Viewer (MCVV)
2. Enter VIN and
then select
"Search"
CV Contract Active

Page 6 of 40

10/24/2023 09:06 AM tlawrenc

1. Go to Mazda Connected Vehicle Viewer (MCVV)

2. Select "Vehicle Communication Line Status Reference"
3. Enter VIN and then select "Search"

TCU Activation
Status Check

TCU in Deactivation Mode (Status -> Closed)

One Time Passcode (OTP) is processing (Status -> Open Requested)
Page 7 of 40

10/24/2023 09:06 AM tlawrenc

TCU Active (Status -> Opened)

REPAIR PROCEDURE
CAUTION: DO NOT swap TCU with another vehicle as the TCU is VIN locked after activation. A TCU swap with another
vehicle will disable Connected Services on both vehicles.
PREPARATION:
1. Confirm that the Telematics Communication Unit (TCU) is at the latest software level. Go to Telematics
Communication Unit (TCU) Updates
• Mazda3 built before July 1, 2021
104603_ _ or later (Verizon)
• Mazda3 built after July 1, 2021
10007 or later (AT&T)
• CX-30 built before July 1, 2021
304603_ _ or later (Verizon)
• CX-30 built after July 1, 2021
10007 or later (AT&T)
• CX-5 - 10024 or later
• CX-9 - 10024 or later
• MX-30: 10020 or later
• CX-50: 10004 or later
○

○

○

○

2. Go to eMDCS Vehicle Inquiry and confirm the following campains are not shown or closed:
• CSP06
• CSP07
Page 8 of 40

10/24/2023 09:06 AM tlawrenc

• SSPC7
• DRW41
3. Go to eMDCS Vehicle Inquiry and confirm CSP04 is not shown.
4. In most cases, the customer will not leave their device with you for troubleshooting, therefore a connected vehicle
take-over is necessary. Use your personal device or dealer supplied device for troubleshooting. Go to Enrollment.
• At customer pick-up, inform customer to re-enroll into Connected Services as a new primary user.
5. Confirm the customer's phone and vehicle have good to strong reception during the concern as shown in the table
below.

• If the reception icon shows "X", the TCU is deactivated. Enrollment is not possible. Go to TCU Activation.

• Customer/Dealer can activate CV services anytime via MyMazda app
Customer - There might be a slight delay in making the backend connection since it was
temporarily deactivated.
Dealer - Go to TCU Activation
○

○

• If the reception icon shows " \ ", move the vehicle to an area with a clear view of the sky.

• If the reception is weak, move the vehicle to a location where the reception is good to strong as shown in
the table, then try to get the Authorization Code and/or operate the remote functions before proceeding to
the Repair Procedure if there is still an issue.
• If the reception is good to strong, proceed to Connected Vehicle Troubleshooting below.
NOTE: Vehicles stored for long periods may loose GPS clock sychronization. If the vehicle is stored for a long
Page 9 of 40

10/24/2023 09:06 AM tlawrenc

period, test drive the vehicle to give the GPS clock time to sychronize before enrolling or testing connected vehicle
functions.
Index
1. Unable to create a MyMazda account
2. Remote function(s) inoperative
3. No One Time Pass Code (OTP)
4. Connected vehicle reception strength icon shows "X" or "\"
5. MyMazda App displays incorrect tire pressures (Except CX-5 and CX-9)
6. Unable to activate Connected Services (2019 Mazda3)
7. Software Update Error (2020 Mazda3)
8. Functions inoperative (2021-> CX-30, CX-50, Mazda3 and MX-30)
9. First remote control attempt fails, second attempt works fine
10. Engine turns off when opening door
11. Low Tire pressure will not clear after correcting tire pressue
12. MyMazda App does not display tire air pressures (CX-5, CX-9)
•
•
•
•

MCVV One Time Passcode (OTP) Troubleshooting
TCU Activation
Educational Videos
Resources

Connected Vehicle Troubleshooting
Symptom
The customer is not able to create a
MyMazda account. The customer
receives the following error:
MyMazda App - Internal Usher SDK
error.
1

Cause

Action
1. Text “Start” to 1-949 518-0058 (Twilio SMS for
Mazda)
2. Retry to create a MyMazda account.

Customer
NOTE: USA and Canada only
inadvertently
texted “Stop”
to 1-949 5180058
(Twilio SMS for
Mazda)

Page 10 of 40

10/24/2023 09:06 AM tlawrenc

MyMazda Website - ERROR! Unable to
send one-time password.

Remote function(s) inoperative.
2

• Engine Start / Stop
• Door Lock / Unlock
• Lights ON / OFF

Go to the
MyMazda App
to view the
Push Notification
reason for
remote function
failure.
OS Lock

Home

Inbox