Technical Service Bulletin

S-SB-0015-15 Rev1 July 17, 2015 / = sSs>cicm

2016 tC Pre-Delivery Service (PDS)

Service
Category General
Scion Supports ie
Section Pre-Delivery Service Market USA ASE Certification “age
Applicability
YEAR(S) MODEL(S) ADDITIONAL INFORMATION
2016 tC

REVISION NOTICE
March 4, 2016 Rev1:

e The Warranty Information Section has been updated.
Any previous printed versions of this bulletin should be discarded.

Introduction

Pre-Delivery Service (PDS) is a critical step in satisfying your dealership’s new car customers.
Customer feedback indicates the following areas deserve special attention when performing PDS:

e Careful inspection for paint chips/scratches and body dents/dings.

e Proper operation of electrical accessories (including interior light, clock, and radio reset).
e Interior cleanliness.

e Proper function of mechanical systems.

Customer retention and proper maintenance of vehicles has been a major focus for Toyota and
Scion. To help remind customers that regular oil changes are essential to the proper maintenance
of their vehicle, dealers are required to begin installing a first oil change reminder sticker prior to
delivery. By doing this, customers will be reminded to return to your dealership for their first oil
change. Your current oil change reminder sticker may be used. (See PDS Check Sheet item 9 of
“Final Inspection & Cleaning.”)

A new PDS Check Sheet has been developed for the 2016 model year tC. Some check points
have been added, expanded, or clarified. Bulletins are available for items in bold type.

© 2016 Toyota Motor Sales, USA Page 1 of 7
= scicr _ S-SB-0015-15_—_—-Rev1

2016 tC Pre-Delivery Service (PDS)

July 17, 2015

Page 2 of 7

Warranty Policy

If the need for additional repairs or adjustment is noted during the Pre-Delivery Service, the

required service should be performed under warranty. Reimbursement will be managed under the

warranty policy.

The Warranty Policy and Procedures Manual requires that you maintain the completed
PDS check sheet in the customer’s file. If you cannot produce a completed form for each
retailed vehicle upon TMS and/or Region/Distributor audit, the PDS payment amount will be
subject to debit.

An additional Repair Order completed in conjunction with normal PDS must have time
punch/flags for service. If multiple repairs are performed, separate time flags must be punched for

each repair.

Warranty Information

OP CODE DESCRIPTION TIME OFP m1 T2
001013 Pre-Delivery Service (PDS) 1.0 - - -
Required Tools & Equipment
REQUIRED EQUIPMENT SUPPLIER PART NUMBER QTY
Techstream 2.0* TS2UNIT
ADE 1
Techstream Lite TSLITEPDLRO1

* Essential SST.

NOTE

e Only ONE of the Techstream units listed above is required.
e Software version 10.10.018 or later is required.

e Additional Techstream units may be ordered by calling Approved Dealer Equipment (ADE)
at 1-800-368-6787.

© 2016 Toyota Motor Sales, USA

scion — S-SB-0015-15 Revi July 17, 2015 Page 3 of 7

2016 tC Pre-Delivery Service (PDS)

Before Inspection

When performing new car Pre-Delivery Service, install Short Pin before moving vehicle from
storage lot so that Functional Operation checks can begin as soon as vehicle is moved into the
service stall.

1.
2.

Install Short Pin — see check sheet
Install radio antenna

Functional Operation

Apply parking brake and cycle ignition “IG-ON,” place gear selector in reverse, turn on lights and
rear defogger. Unlock all doors, release fuel door, release trunk hatch.

PaN >=

© ONO

Check dome, courtesy, map, and sun visor lights*

Check warning/indicator lights, gauges, and horn

Check windshield wipers and washers

Check headlights, instrument lights, turn signals, dimmer switch, emergency flashers, and
brake lights

Check inside/outside rear view mirror operation/adjustment

Check power outlet* and cigarette lighter

Check audio/navigation* systems, set SSP* to tC, and set clock

Install shift-lock override button cover

Check sliding roof*

Walkaround Inspection

Starting at the driver’s door, check window and door lock operation and the operation of all power
windows and door locks from master switch. Assure tightness of interior garnishes and check
seat belts. Inspect hatch contents and lights at rear of vehicle. Inspect passenger door window
regulator and lock operation and garnishes. Check seat and seat belt operation. Continue on
around to the front of the vehicle checking lights.

ih.
ZL.

Check Smart Key System* - S-SB-0008-15

Check door and door lock operation, including each wireless remote control/theft
deterrent system*

Check power window operation
Check that engine starts with all keys
Check seats and seat belt operation

© 2016 Toyota Motor Sales, USA
Sscionml — S-SB-0015-15 Rev1 July 17, 2015 Page 4 of 7

2016 tC Pre-Delivery Service (PDS)

Walkaround Inspection (Continued)

Check rear defogger

Check side marker, tail, backup, and license plate lights

Check rear hatch/cargo area trim appearance

Adjust spare tire pressure, inspect for damage, and check jack and tool installation

© MND

NOTE
Compact spare tire — 60 psi (414 kPa).

10. Check headlight aim
Refer to the Repair Manual for procedures.

Under Hood

1. Check engine oil and ATM* fluid levels
2. Check brake and clutch* fluid levels
Visually inspect using see-through reservoirs.
3. Check engine coolant level
4. Check windshield washer fluid level
5. Check battery state-of-charge using Digital Battery System Analyzer

Refer to Service Bulletin No. PGO01-06, “Battery Maintenance for In-stock Vehicles & Pre-
Delivery.”

NOTE

Battery SOC should be a minimum of 75%. Please enter the SOC Reading on the space
provided on the check sheet and attach the printout to the check sheet.

6. Inspect for fuel, oil, coolant, and other fluid leaks.

© 2016 Toyota Motor Sales, USA
scion — S-SB-0015-15 Rev1 July 17, 2015 Page 5 of 7

2016 tC Pre-Delivery Service (PDS)

Under Vehicle (On Hoist)

Road Test

1. Remove disc brake anti-rust covers/anti-corrosion wheel film* - PD0O17-04
Visually inspect rotors for rust.

NOTE

For best rotor rust prevention, retain wheel film on vehicle until just prior to customer delivery.

Activate and initialize Tire Pressure Warning System (TPWS) — see check sheet
Inspect tires for defects/damage
Install wheel covers/caps/spare tire wheel covers*

ak Ww N

Install rubber body plugs
Install the rubber body plugs (stored in glove box) into rear torque box holes.

®

Inspect for fuel, oil, coolant, and other fluid leaks.
7. Visually check bolts and nuts on chassis and powertrain for looseness
8. Inspect under the vehicle for damage, rust, etc.

A complete road test helps assure customer satisfaction. Drive vehicle over a variety of road
surfaces and driving conditions. Check for unusual noise and driving performance.

1. Check cold engine operation
Check starting and fast idle operation performance.
2. Check engine operation during warm-up
Check that engine operates smoothly during warm-up.
Check for unusual noise, engine vibration, rough idle, etc.
3. Check engine at normal operating temperature

Check engine performance over a broad range of driving conditions, including idle quality,
acceleration, cruise, and deceleration.

4. Check clutch*/automatic transmission operation

Check clutch operation, including engagement, disengagement, chattering, and unusual
noise.

Check manual transmission operation, including shift lever/linkage and unusual noise.

Check automatic transmission operation, including operation in each range, neutral start
switch, and shift lock system.

© 2016 Toyota Motor Sales, USA
scion — S-SB-0015-15 Rev1 July 17, 2015 Page 6 of 7

2016 tC Pre-Delivery Service (PDS)

Road Test (Continued)

5,

7.
8.
9.
10.
11.

Check brake and parking brake operation

Check brake function, including unusual noise, parking brake performance, and all related
brake system indicator lights.

Check steering operation and off-center/vehicle pull/flutter
Check steering function.

Check steering off-center/vehicle pull/flutter.

Inspect for abnormal noise and vibration

Inspect for squeaks and rattles

Check heater and A/C operation

Check speedometer operation

Check cruise control operation

Final Inspection & Cleaning

1.

ww

Oo NON

Remove interior protective covers, unnecessary labels, tags, etc. (Remove protective covers
just before delivery to the customer)

Remove plastic covers from door panels, seats, head restraints, and sun visors, as required.
Remove labels, tags, and stickers (except those containing owner information).

NOTE

Consumer information labels, such as airbag information warning and bumper information
labels, MUST be left on the vehicle until delivery to a retail customer.

Verify floor mat application and install using retaining clips* — S-SB-0007-15
Visually inspect all interior parts for installation, damage, fit, dirt, etc.

Remove Rapgard™ and clear protective bumper film*

Ensure ALL glue residue is removed.

Wash and clean vehicle

Inspect exterior body parts for proper installation, damage, rust, etc.

Inspect exterior body parts for scratches, chips, rust, dents, damage, etc.

Place Owner's Guide and first aid kit portfolio* in glove box

© 2016 Toyota Motor Sales, USA
——scionm = S-SB-0015-15 Revi July 17, 2015 Page 7 of 7

2016 tC Pre-Delivery Service (PDS)

Final Inspection & Cleaning (Continued)

9. Place oil change sticker on inside of windshield, top left corner

Complete the mileage or date recommendation and apply the oil change reminder sticker to
the inside of the windshield, top left corner. You may use your current oil change reminder
sticker.

10. Perform Techstream Health Check
Perform Health Check to ensure that diagnostic trouble codes are not present. Health Check
results can be printed for the customer at delivery, or for the dealer file, using the Diagnostic
Report function.

11. Install front license plate and mounting bracket* — see check sheet

*Inspect or install when equipped or required.

© 2016 Toyota Motor Sales, USA