L624A.01.16

To:
Subject:
Date:

Official After Sales Network
AC system SW update
March 18,2016

Pages

20

Subject.
Air Conditioning Software Update.

Remember to fill all data in the section “Service and Recall Campaign” in the Warranty booklet of the vehicle as
shown below.

Model.
Huracan Coupè.
Model year.
2015.
Special or Limited Versions.
All vehicle versions.
Markets.
All
VIN identification.
From FLA00163 al VIN FLA03652.
Warning: some vehicles included in this VIN range may
not be involved, so check carefully on the Lamborghini
WEB Portal (at the section named VIN Info) if the cars in
your workshop or in your dealer stock are involved before
performing any other operation.
Information to the field.
As a result of continuous product monitoring, Automobili
Lamborghini Spa has introduced a new software release to
enhance the air conditioning functionality.

Necessary tools/material.

P/N
-

Description
ODIS Service diagnosis software updated to release 3.0.1
(or following).

Q
-

Field solution.
Update software that manage air conditioning/Klima.
Spare parts.
P/N

Description
-

-

Q
-

Replaced parts management.
Store properly and tagged the parts replaced with bar code
form for their identification during Area Manager visits.
Bulletin substitution.
None.
Warranty Claim data.
The warranty reimbursement request for this rework action
will be managed by the following standard Warranty
Claim procedures.
Campaign Code:
Campaign Des.:
Cost code:
Component code:
Trouble code:
Labor code:
Labor Time:

Rev.01

L624-A.01.16
AC system SW update
50
CCA0116
220
CC0116100
0,8 h

The information and procedures published below are strictly confidential and intended exclusively for authorized operators and individuals. All copyrights are the property of Automobili Lamborghini S.p.A based on copyright law. The company reserves the right to make
updates and modifications. The reprinting, reproduction, forwarding to unauthorized people and/or to third parties and partial or entire
translation thereof are prohibited without written authorization from Automobili Lamborghini S.p.A.
doc. nr: L/V6_M06 Rev.[02]

1/20

L624A.01.16

To:
Subject:
Date:

Official After Sales Network
AC system SW update
March 18,2016

Pages

20

Workshop instructions

Click “Start tests” to verify the “Last Sync” date.
Update procedure:

The instructions contained in this bulletin are based on
ODIS Service diagnosis software updated to release 3.0.1
(or following) and Lamborghini database 2.5.3 (see
BI.07.15)

2. Please connect a battery charger to the recharge points
available in the front luggage compartment, as shown
in the picture.

Preliminary operations:
1. Make sure to be synchronized with Mirrorserver
checking the “Last Sync” date:
http://mirrorserver/maintenance/diagnosis.py
or:
http://IP_address/maintenance/diagnosis.py
if you did not set up the mirrorserver IP alias.

IMPORTANT
Make sure the latest synchronization was done after
February 14th , 2016.

3. Please connect the VAS5054 interface to the vehicle
OBD plug and to the diagnostic laptop.

Turn the ignition ON.

4. Start ODIS service double-clicking the related icon on
your diagnosis laptop desktop.

Rev.01

The information and procedures published below are strictly confidential and intended exclusively for authorized operators and individuals. All copyrights are the property of Automobili Lamborghini S.p.A based on copyright law. The company reserves the right to make
updates and modifications. The reprinting, reproduction, forwarding to unauthorized people and/or to third parties and partial or entire
translation thereof are prohibited without written authorization from Automobili Lamborghini S.p.A.
doc. nr: L/V6_M06 Rev.[02]

2/20

L624A.01.16

To:
Subject:
Date:

Official After Sales Network
AC system SW update
March 18,2016

Pages

20

5. Scroll down the vertical bar on the right.

Click “OK” to hide the general information window.

8. Verify the vehicle identification in the “Basic vehicle
characteristics” window.
Insert Variant and Engine if not already present choosing from the drop-down menus.
Leave the checkbox “Using guided fault finding” selected.
Click “Adopt”.

6. Click “Start diagnosis”.

Make sure that ODIS can detect the vehicle connection and the key status.

9. Skip the login window clicking “Cancel”.
7. Click “Cancel” for any group systems login request.

Rev.01

The information and procedures published below are strictly confidential and intended exclusively for authorized operators and individuals. All copyrights are the property of Automobili Lamborghini S.p.A based on copyright law. The company reserves the right to make
updates and modifications. The reprinting, reproduction, forwarding to unauthorized people and/or to third parties and partial or entire
translation thereof are prohibited without written authorization from Automobili Lamborghini S.p.A.
doc. nr: L/V6_M06 Rev.[02]

3/20

L624A.01.16

To:
Subject:
Date:

Official After Sales Network
AC system SW update
March 18,2016

Pages

20

10. In the following window, click “Without job”.

13. Select “SVM – Direct input: SVM code for problem
related update” clicking the related row.
Click “Perform test…” to execute the SVM function.

11. Answer “No” to the “actual comparison” request.
14. Insert the code L624A0116 in the upper box.
Click “Adopt”.

12. At the end of initial operations (see bottom-right status
bar), select “Special functions”.
15. Click “Yes” to confirm that the inserted code is correct.

Rev.01

The information and procedures published below are strictly confidential and intended exclusively for authorized operators and individuals. All copyrights are the property of Automobili Lamborghini S.p.A based on copyright law. The company reserves the right to make
updates and modifications. The reprinting, reproduction, forwarding to unauthorized people and/or to third parties and partial or entire
translation thereof are prohibited without written authorization from Automobili Lamborghini S.p.A.
doc. nr: L/V6_M06 Rev.[02]

4/20

L624A.01.16

To:
Subject:
Date:

Official After Sales Network
AC system SW update
March 18,2016

Pages

20

16. Click “Done/Continue” to start the data acquisition
from all ECUs.

IMPORTANT
During the SVM operation a battery charger must be
connected.

17. Wait until the data acquisition from all ECUs is completed.

Be sure that the internet connection is correctly established.
Insert your GeKo user name in the field “User name”
and the pin 1324 + current 6 digit code displayed on
your GeKo token in the field “Password”.
Then confirm clicking “Adopt”.

20. The communication is then established with the central server.
The following message is displayed:
“software to be updated has been detected (on one
control unit).”
Click “Done/Continue”

18. Click “Done/Continue”

19. For the online authentication a valid GeKo account is
necessary.

Rev.01

The information and procedures published below are strictly confidential and intended exclusively for authorized operators and individuals. All copyrights are the property of Automobili Lamborghini S.p.A based on copyright law. The company reserves the right to make
updates and modifications. The reprinting, reproduction, forwarding to unauthorized people and/or to third parties and partial or entire
translation thereof are prohibited without written authorization from Automobili Lamborghini S.p.A.
doc. nr: L/V6_M06 Rev.[02]

5/20

L624A.01.16

To:
Subject:
Date:

Official After Sales Network
AC system SW update
March 18,2016

Pages

20

21. AC System software update.
The figure below refers to the software version and the
part number of the air conditioning control unit of the
vehicle used as example.

23. Wait until the update programming of the air conditioning system ECU is completed.

Those data may change depending on the car.
Click “Yes” to check the availability of the software
on the Mirrorserver.

24. Once the update programming has been completed
successfully a message is displayed.

- Click “Done/Continue”.
If the update programming has not been completed or
has been unsuccessful:
22. Verify the new AC system software and click “Yes” to
start the update.

- Turn the ignition OFF;
- Wait at least one minute and turn the ignition
ON again;
- Click “Repeat” to restart the update procedure if
it is directly requested by the program; otherwise repeat the procedure from step 12.

IMPORTANT
Do not disconnect the hardware interface from OBD
plug and do not switch ignition OFF during the software update!

Rev.01

The information and procedures published below are strictly confidential and intended exclusively for authorized operators and individuals. All copyrights are the property of Automobili Lamborghini S.p.A based on copyright law. The company reserves the right to make
updates and modifications. The reprinting, reproduction, forwarding to unauthorized people and/or to third parties and partial or entire
translation thereof are prohibited without written authorization from Automobili Lamborghini S.p.A.
doc. nr: L/V6_M06 Rev.[02]

6/20

L624A.01.16

To:
Subject:
Date:

Official After Sales Network
AC system SW update
March 18,2016

Pages

20

25. An ignition OFF-ON cycle is necessary to restart the
ECU.

28. It is necessary to perform a calibration.
Click “Done/Continue”.

Click “Done/Continue”.

29. Wait until the calibration data download is complete.
26. Switch the ignition OFF.

Click “Done/Continue”.

Click “Done/Continue”.

27. Switch the ignition ON.
Click “Done/Continue”.

Rev.01

The information and procedures published below are strictly confidential and intended exclusively for authorized operators and individuals. All copyrights are the property of Automobili Lamborghini S.p.A based on copyright law. The company reserves the right to make
updates and modifications. The reprinting, reproduction, forwarding to unauthorized people and/or to third parties and partial or entire
translation thereof are prohibited without written authorization from Automobili Lamborghini S.p.A.
doc. nr: L/V6_M06 Rev.[02]

7/20

L624A.01.16

To:
Subject:
Date:

Official After Sales Network
AC system SW update
March 18,2016

Pages

20

30. Complete ECU 08 – Air Conditioner/Klima calibration:
Click “Done/Continue”.
If the calibration update has not been completed or has
been unsuccessful:
•
•

Turn the ignition OFF
Wait at least one minute before turning the
ignition ON again

Click “Repeat” to restart the update procedure if it is
directly requested by the program; otherwise repeat
the calibration from step 28.

33. Wait until the data acquisition from all the control
modules is complete.

31. Click “Done/Continue” to complete the SVM.

32. SVM can be completed after data acquisition from all
ECUs.
Click “Done/Continue”.

Rev.01

The information and procedures published below are strictly confidential and intended exclusively for authorized operators and individuals. All copyrights are the property of Automobili Lamborghini S.p.A based on copyright law. The company reserves the right to make
updates and modifications. The reprinting, reproduction, forwarding to unauthorized people and/or to third parties and partial or entire
translation thereof are prohibited without written authorization from Automobili Lamborghini S.p.A.
doc. nr: L/V6_M06 Rev.[02]

8/20

L624A.01.16

To:
Subject:
Date:

Official After Sales Network
AC system SW update
March 18,2016

Pages

20

34. Once the data report has been sent a feedback is displayed as shown in the picture below.

38. Select the path to save the session and click “Save”.

The software update of air conditioning ECU has been
completed successfully and all data have been stored
in the system.
Click “Done/Continue”.

39. Activate the electronic parking brake (EPB) on the car,
turning on the EPB warning light on the instrument
cluster.
Europe/RoW

35. Click “Done/Continue”.
or
USA

Turn the ignition OFF.
Remove the diagnosis interface.
Close the doors.
36. Once the update is finished and the SVM program is
completed the vehicle has to go in sleep mode.

Wait at least five minutes, until the instrument cluster
and in particular the EPB warning light turn off.

37. First of all please save the current diagnosis session.
Click “Stop” in the “Data” menu.
Click “Save” in the next dialogue box.

Rev.01

The information and procedures published below are strictly confidential and intended exclusively for authorized operators and individuals. All copyrights are the property of Automobili Lamborghini S.p.A based on copyright law. The company reserves the right to make
updates and modifications. The reprinting, reproduction, forwarding to unauthorized people and/or to third parties and partial or entire
translation thereof are prohibited without written authorization from Automobili Lamborghini S.p.A.
doc. nr: L/V6_M06 Rev.[02]

9/20

L624A.01.16

To:
Subject:
Date:

Official After Sales Network
AC system SW update
March 18,2016

Pages

20

40. Reconnect the diagnosis interface and turn the ignition
ON.

IMPORTANT
In ODIS initial screen DO NOT click “Start diagnosis”, but CLICK “Next” in the “Data” menu.