NHTSA ID Number: 10197464
Manufacturer Communication Number: L624-A.01.16
TSB/Document Date: 2021-06-14
Summary
Air Conditioning Software Update
42. Select again the “Special functions” tab and click
“Erase fault memory – overall system”: this is necessary to delete all errors created during the software
update procedure.
Click “Perform test…”.
43. Switch the ignition OFF and click “Done/Continue”.
41. Select the diagnostic session previously saved and
click “Open”.
44. Switch the ignition ON and click “Done/Continue”.
Rev.01
The information and procedures published below are strictly confidential and intended exclusively for authorized operators and individuals. All copyrights are the property of Automobili Lamborghini
S.p.A based on copyright law. The company reserves the right to make
updates and modifications. The reprinting, reproduction, forwarding to unauthorized people and/or to third parties and partial or entire
translation thereof are prohibited without written authorization from Automobili Lamborghini S.p.A.
doc. nr: L/V6_M06 Rev.[02]
10/20
L624A.01.16
To:
Subject:
Date:
Official After Sales Network
AC system SW update
March 18,2016
Pages
20
45. There might be static errors which cannot be deleted.
Basic Settings for ECU 08 – AC system
46. Select KLH-08 ECU and right-click on it.
IMPORTANT
To remove this type of errors from the AC ECU, the
related “Basic Settings” have to be performed.
Click “Guided Functions” in the drop-down menu.
Click “Done/Continue”.
47. Select 08 – Basic setting to execute the Air Conditioning basic settings.
Click “Execute”.
48. Click “Done/Continue”.
Rev.01
The information and procedures published below are strictly confidential and intended exclusively for authorized operators and individuals. All copyrights are the property of Automobili Lamborghini S.p.A based on copyright law. The company reserves the right to make
updates and modifications. The reprinting, reproduction, forwarding to unauthorized people and/or to third parties and partial or entire
translation thereof are prohibited without written authorization from Automobili Lamborghini S.p.A.
doc. nr: L/V6_M06 Rev.[02]
11/20
L624A.01.16
To:
Subject:
Date:
Official After Sales Network
AC system SW update
March 18,2016
Pages
20
49. Click “Done/Continue”.
52. If there are static errors stored in the ECU memory
when requested to quit the Basic Settings, answer
“No”.
If there are no errors in the memory of AC ECU, the
tester moves directly to the next step.
50. Make sure the AC system is active.
Click “Done/Continue”.
53. Execute the AC basic setting in the following order:
•
•
•
Basic setting 4 to perform the servomotors
auto-addressing.
Basic setting 1 to perform the servomotors
flaps position self-learning.
Basic setting 3 to perform the A/C compressor performance test.
51. Click “Yes”.
Click “Function description” for basic settings information and measured values meaning.
During the “Basic Settings” operations the AC led on
the panel flashes.
Click “Basic setting 4”.
Rev.01
The information and procedures published below are strictly confidential and intended exclusively for authorized operators and individuals. All copyrights are the property of Automobili Lamborghini S.p.A based on copyright law. The company reserves the right to make
updates and modifications. The reprinting, reproduction, forwarding to unauthorized people and/or to third parties and partial or entire
translation thereof are prohibited without written authorization from Automobili Lamborghini S.p.A.
doc. nr: L/V6_M06 Rev.[02]
12/20
L624A.01.16
To:
Subject:
Date:
Official After Sales Network
AC system SW update
March 18,2016
Pages
20
54. Basic setting 4
55. Click “Done/Continue” to perform the basic setting.
Make sure that ignition is ON.
Click “Done/Continue”.
56. Make sure the basic setting status has moved to “performed”.
57. Click “Done/Continue”.
Rev.01
The information and procedures published below are strictly confidential and intended exclusively for authorized operators and individuals. All copyrights are the property of Automobili Lamborghini S.p.A based on copyright law. The company reserves the right to make
updates and modifications. The reprinting, reproduction, forwarding to unauthorized people and/or to third parties and partial or entire
translation thereof are prohibited without written authorization from Automobili Lamborghini S.p.A.
doc. nr: L/V6_M06 Rev.[02]
13/20
L624A.01.16
To:
Subject:
Date:
Official After Sales Network
AC system SW update
March 18,2016
Pages
20
58. Click “Yes”.
61. Click “Done/Continue” to perform the basic setting.
The AC led on the control panel flashes.
59. Click “Basic setting 1”
62. Make sure the basic setting status has moved from
“activated” to “performed”.
60. Basic setting 1
Make sure that ignition is ON.
Click “Done/Continue”.
Rev.01
63. Click “Done/Continue”.
The information and procedures published below are strictly confidential and intended exclusively for authorized operators and individuals. All copyrights are the property of Automobili Lamborghini S.p.A based on copyright law. The company reserves the right to make
updates and modifications. The reprinting, reproduction, forwarding to unauthorized people and/or to third parties and partial or entire
translation thereof are prohibited without written authorization from Automobili Lamborghini S.p.A.
doc. nr: L/V6_M06 Rev.[02]
14/20
L624A.01.16
To:
Subject:
Date:
Official After Sales Network
AC system SW update
March 18,2016
Pages
20
64. Click “Yes”.
67. Check the air conditioning parameters and wait until
the procedure is complete.
65. Click “Basic setting 3”.
66. Basic setting 3
68. Make sure the basic setting status has moved to “performed”.
Click “Done/Continue”.
This basic setting must be performed with engine ON.
During this procedure the AC led on the control panel
flashes.
Click “Done/Continue” to execute the basic setting.
Turn the engine ON.
Click “Done/Continue”.
Rev.01
The information and procedures published below are strictly confidential and intended exclusively for authorized operators and individuals. All copyrights are the property of Automobili Lamborghini S.p.A based on copyright law. The company reserves the right to make
updates and modifications. The reprinting, reproduction, forwarding to unauthorized people and/or to third parties and partial or entire
translation thereof are prohibited without written authorization from Automobili Lamborghini S.p.A.
doc. nr: L/V6_M06 Rev.[02]
15/20
L624A.01.16
To:
Subject:
Date:
Official After Sales Network
AC system SW update
March 18,2016
Pages
20
69. Turn the engine OFF.
Click “Done/Continue”.
73. Verify that all errors have been deleted from the air
conditioning ECU memory. If some sporadic errors
are still present, cancel them.
70. Turn ignition ON.
Click “Done/Continue”.
IMPORTANT
If any static error is still present in the air conditioning
ECU memory after the software update and the basic
settings operations, repeat the procedure from step 46.
71. Click “Done/Continue” to end the basic setting.
72. Click “No” to quit the program.
Rev.01
The information and procedures published below are strictly confidential and intended exclusively for authorized operators and individuals. All copyrights are the property of Automobili Lamborghini S.p.A based on copyright law. The company reserves the right to make
updates and modifications. The reprinting, reproduction, forwarding to unauthorized people and/or to third parties and partial or entire
translation thereof are prohibited without written authorization from Automobili Lamborghini S.p.A.
doc. nr: L/V6_M06 Rev.[02]
16/20
L624A.01.16
To:
Subject:
Date:
Official After Sales Network
AC system SW update
March 18,2016
Pages
20
Diagnosis protocol saving procedure:
74. Expand the “Protocol” right-hand menu.
Click “Print” in the “Diagnostic Protocol” menu to
print the protocol directly on a .pdf file (if Adobe pdf
is available) or in paper format sending it to a printer.
75. Click “Save” in the “General” group.
78. The diagnosis protocol has to be attached to the related Warranty Claim
(in order to insert the claim on the Web Portal, please
refer to Warranty Claim Manual you can find under
the Portal, Warranty section).
76. In the dialogue box select:
-
Long protocol
Then click “OK”.
77. Select the path on your laptop where you want to save
the diagnosis protocol. (default path is set under ODIS
Service installation folder and can be changed in Admin menu)
Diagnosis protocol format is internet “.htm”.
Click “Save”.
Rev.01
The information and procedures published below are strictly confidential and intended exclusively for authorized operators and individuals. All copyrights are the property of Automobili Lamborghini S.p.A based on copyright law. The company reserves the right to make
updates and modifications. The reprinting, reproduction, forwarding to unauthorized people and/or to third parties and partial or entire
translation thereof are prohibited without written authorization from Automobili Lamborghini S.p.A.
doc. nr: L/V6_M06 Rev.[02]
17/20
L624A.01.16
To:
Subject:
Date:
Official After Sales Network
AC system SW update
March 18,2016
Pages
20
Trouble shooting
A. If the following dialogue box appears during ECUs
identification:
Click “Continue”
B. If the error message regarding the VAS5054 interface
and the two icons for “on board connection” and “key
status” are displayed as in the picture below:
-
Click “Cancel”;
-
Repeat the VAS5054 HW interface installation following the procedure (*) “VCI Manager v2.0”, by entering in the menu “Extras” on
the right side and clicking “Diagnostic interface”.
D. If the loss of connection happens during the target/actual comparison during SVM procedure:
- It is not possible to connect to central server,
check the working connection of internet and retry clicking “1”.
C. If one of the connection error screens is shown as in
the pictures below:
- it is not possible to establish a connection with
the central server. Please check carefully that the
diagnosis laptop is properly connected to the internet network and retry clicking “Yes” or “Done/Continue”.
Rev.01
The information and procedures published below are strictly confidential and intended exclusively for authorized operators and individuals. All copyrights are the property of Automobili Lamborghini S.p.A based on copyright law. The company reserves the right to make
updates and modifications. The reprinting, reproduction, forwarding to unauthorized people and/or to third parties and partial or entire
translation thereof are prohibited without written authorization from Automobili Lamborghini S.p.A.
doc. nr: L/V6_M06 Rev.[02]
18/20
L624A.01.16
To:
Subject:
Date:
Official After Sales Network
AC system SW update
March 18,2016
Pages
20
E. If the incorrect identification message is shown as in
the picture below (error code: ODS1007E):
-
be sure that your Geko account is valid;
-
be sure that the label “Geko” is written on the
token that you are using for the authentication;
-
be sure the Password inserted is correct;
-
click “Cancel” and perform the application
test (see document
“ODIS_Checking_ConnectionServer_SVM_2
.0” (*)).
G. If the same error is present during the application test,
try the following procedure:
- quit ODIS;
- Enter
the
folder
C:\Program
Files
(x86)\Offboard_Diagnostic_Information_Syste
m_Service\.automatic_sessions on your diagnosis laptop;
-
delete the only file present in that folder.
-
re-Start ODIS Service under following conditions:
1. Network connection available;
2. ODIS connection set on “Internet”;
F. If the infrastructure error message is shown as in the
picture below (error code: ODS9212E):
- make sure that your Geko account is valid
- check that the label “Geko” is written on the token that you are using for the authentication
- verify in ODIS settings you have “Internet” instead
of
“CPN”
(see
document
“ODIS_Initial_Setup_2.0” (*))
- click on Cancel and perform the application test
(see document
“ODIS_Checking_ConnectionServer_SVM_2.0
” (*))
Rev.01
Retry the application test and the SVM
with your GeKO Token.
IMPORTANT REMARK
In the case an error is still present, repeat the procedure with a second GeKO token, if available.
The information and procedures published below are strictly confidential and intended exclusively for authorized operators and individuals. All copyrights are the property of Automobili Lamborghini S.p.A based on copyright law. The company reserves the right to make
updates and modifications. The reprinting, reproduction, forwarding to unauthorized people and/or to third parties and partial or entire
translation thereof are prohibited without written authorization from Automobili Lamborghini S.p.A.
doc. nr: L/V6_M06 Rev.[02]
19/20
L624A.01.16
To:
Subject:
Date:
Official After Sales Network
AC system SW update
March 18,2016
Pages
20
H. In the case the flash container is not detected (see figure):
- Make sure to be recently synchronized with Mirrorserver by checking the last date of Sync:
- http://mirrorserver/maintenance/diagnosis.py
- or
- http://IP_address/maintenance/diagnosis.py
- if you don’t have previously defined the “mirrorserver” IP address alias.
- Make sure to be correctly connected with Mirrorserver.
NOTE:
(*)ODIS technical documentation can be retrieved on
the Lamborghini web portal, under ODIS section.
IMPORTANT REMARK:
The documents to be mandatory attached to the claim
are:
- Job order done;
- Diagnosis Protocol saved.
Failure in following the procedures may lead to the rejection of the request.
Click “Start tests” and verify “Last Sync” date.
Rev.01
The information and procedures published below are strictly confidential and intended exclusively for authorized operators and individuals. All copyrights are the property of Automobili Lamborghini S.p.A based on copyright law. The company reserves the right to make
updates and modifications. The reprinting, reproduction, forwarding to unauthorized people and/or to third parties and partial or entire
translation thereof are prohibited without written authorization from Automobili Lamborghini S.p.A.
doc. nr: L/V6_M06 Rev.[02]
20/20
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: L624-A.01.16
Replacement Service Bulletin Number:
MFR Communication Date: 2016-03-18
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: ELECTRICAL SYSTEM:SOFTWARE
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
- Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
- 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
- Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission, ABS, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
- Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCA
Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU c0ding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations - 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCA AutoAuth: Now supports FCA SGW module for Chrysler, for Jeep, for Dodge (2018+), for Fiat (2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Pr0gramming): Allows for Ford, for Lincoln, and for Mazda ECU pr0gramming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order
- 39+ Services/Resets/Adaptations/Relearns/Calibrations: XTOOL D7S full system car scanner diagnostic tool tackles 99% of common car issues through its 36+ special functions, including Oil Reset, EPB, SAS, BMS, Throttle Reset, Injector C0ding, ABS Bleed, TPMS Reset, Power Balance, etc and also covers specific-vehicle functions like Crank Sensor Relearn, ABS Initialization, Cylinder Power Balance, Fuel Trim Reset, Idle Relearn etc. This car diagnostic scanner enhances efficiency, making repairs and maintenance hassle-free. Tip: DO NOT for All vehicles, please check compatibility first
- Cost-effective ECU C0ding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMW, for Benz and offline for BENZ, for MIT, along with PMI functions for Ford, for Mazda, and for Lincoln. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase
- OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
- 【✅Compared to BOSSCOMM IF742, IF745 Offers Full-System Diagnostics】The BOSSCOMM IF745 car diagnostic scanner is an upgraded model of IF742. In addition to supporting all OBD2 Code Reader functions and 6 reset options (ABS/EPB/SAS/BMS/Oil/Throttle), it expands diagnostics from 4 systems (Check Engine/ABS/SRS/Transmission) to vehicle All systems, including Steering, Suspension, and Body Electronics. This provides deeper, more comprehensive diagnostic capabilities.
- 【✨10 OBD2 Functions】The BOSSCOMM IF745 scan tool’s DTC Lookup instantly translates fault codes into user-friendly explanations, its I/M Readiness feature streamlines emissions testing with a single tap, and Freeze Frame lets you pinpoint the exact moment of a fault for in-depth root-cause diagnosis. Combined with a live data dashboard and advanced diagnostics (O2S, OBMon, EVAP), it delivers comprehensive insights for confident troubleshooting.
- 【✨Deep Diagnostics for All Vehicle System Modules】Beyond code reading/clearing and ECU information retrieval, our all-in-one data stream feature lets you inspect all current fault codes and their locations across the vehicle’s systems. This vehicle code reader helps you turn off dashboard warning lights and perform a comprehensive self-check of your car at home—no more back-and-forth trips to the repair shop or hefty inspection fees.
- 【✨6 Essential Resets: ABS Bleeding, Oil, EPB, SAS, Throttle, BMS】The BOSSCOMM IF745 obd2 scanner diagnostic tool swiftly purges air from brake lines to restore braking sensitivity, fine-tunes maintenance cycles to eliminate false alerts, resolves parking brake issues with one-click control, recalibrates steering sensors for stability, optimizes engine idling/acceleration for smoother performance, and deeply resets battery systems to extend lifespan and range via precise parameter adjustments.❗NOTE: Does NOT support bidirectional control, coding, or programming.
- 【✨10,000+ Car Models, AutoVIN, 13 Languages】The BOSSCOMM IF745 vehicle scanner diagnostic tool covers 73+ global car brands and offers support in 13 languages, making it perfect for DIYers, auto mechanics, or as a thoughtful gift. With a single-click AutoVIN feature, it instantly retrieves vehicle serial numbers, streamlining diagnostics for users globally. This adaptable tool balances user-friendliness with precision, catering to both personal and professional requirements.✅Unsure about compatibility? Compatibility will vary on vehicles' model and year, pls reach us via 📧 [email protected] 📧 before purchase.
This product presentation was made with AAWP plugin.