I-1530BT-B100

Immersion Block Heaters ........................................................................LIT0031P
Series 41 Circulation Tank Heaters ........................................................LIT0033A
Battery Pad Heater ..................................................................................LIT0043P

Customer service: Toll Free: 800.328.6108
Email: [email protected]

www.phillipsandtemro.com

Lit Plug .......................................................................................................LIT0045A
Arctic Fox
Coolant Dam Pressure Tester .................................................................LIT0003A
Cold Weather Fuel Gelling Solutions................................................... LIT0004PA

THERMOSTAT
IMMERSION HEATERS
Immersion heater with a
thermostat which regulates
heater’s operating hours.

BENEFITS

Arctic Fox Electric Pad Heaters...............................................................LIT0005A
Hydraulic Liner Fluid Warmers ...............................................................LIT0007A
Fuel & Fluid Heating Solutions ...............................................................LIT0008A
Arctic Fox In-Line Fluid Warmers...........................................................LIT0009A

• Saves money by reducing
electrical costs since the
engine heater cycle time
is reduced
• Ensures engine start up
since desired temperatures
are maintained
• Accommodates trucks
entering or departing the
bay since no preset timer
is required
• Efficient heater operation
because the thermostat
measures the coolant
temperature rather than
ambient air
• Cost saving can be realized
away from home base since
the system stays on-board
the truck

®

Arctic Fox Hot Line In-Line Fuel Heater ...............................................LIT0010A

HERE’S HOW IT WORKS

TEST DATA

The thermostat regulates the engine
heaters by controlling coolant
temperatures. The heater is cycled on
and off according to temperature range
settings. This ensures that a fleet owner
or manager can control electric costs
whether the truck is parked in the bay
or on the road.

• Tests were conducted across North
America from extremely cold climates
to moderate climates. The results
reveal that the thermostat system
reduces heater operating hours
and electrical costs in the cold
weather months.
See back for details.

Customer service: Toll Free: 800.328.6108
Email: [email protected]

www.phillipsandtemro.com

104

1-800-328-6108 or 952-941-9700 • phillipsandtemro.com

TECHNICAL INFORMATION
RECOMMENDED PART APPLICATION BASED ON CLIMATE & EQUIMENT
Use the chart below to determine the recommended
part based on the climate, starting system and
equipment classification.

2. Select the proper “Starting System”

1. Select the appropriate “Temp” the equipment
will operate under

4. If you need additional information, please
contact your Phillips & Temro Industries sales
representative or contact customer service directly.

ATTENTION: 90% of maximum temperature will be reached in
5 hours of operation but the heater is designed for continuous
overnight use.

TEMP
°F/°C

40/4

0/-18

0/-18

3. Determine what “Engine Class” the equipment
is classified

Engine Class
Starting System

Small Diesels Medium Duty Diesels Heavy Duty Diesels
150 to 350 CID to approx. 550 CID to approx. 1150 CID
(18.8 liters)
(2.4 to 5.7 liters)
(9.0 liters)

Coolant Heater 400 to 750 Watt
Immersion,
1000 Watt
Circulation
Heater
Oil Pan Heater

150 Watt
Immersion
with
Thermostat

Additional
Products

Measured Shot
Ether Kit,
Battery Heater

750 or 1000 Watt
Immersion, 1500
Watt
Circulation Heater

2500 Watt Tank,
2250-2500 Watt
Circulation Heater

150 Watt Immersion 300 Watt Immersion 300 Watt Immersion
or
or
300 Watt Clamp-On 500 Watt Clamp-On
Measured Shot
Ether Kit,
Battery Heater

1000 Watt
Coolant Heater 600 or 750 Watt
Immersion,
Immersion,
1000 Watt
Circulation Heater
Circulation
Heater
Oil Pan Heater

1500 Watt Immersion,
1500 Watt
Circulation Heater

Large Duty Diesels
Industrial/Off
Highway

Measured Shot
Ether Kit,
Battery Heater

Measured Shot
Ether Kit,
Battery Heater

1500 Watt
Immersion,
2000 Watt Tank,
2000-2250 Watt
Circulation Heater

2500 Watt Tank,
2250-3500 Watt
Circulation Heater

150 Watt
150 Watt Immersion 300 Watt Immersion 450 Watt Immersion
Immersion with
or
or
Thermostat
300 Watt Clamp-On 500 Watt Clamp-On

-30/-34

Additional
Products

Measured Shot
Ether Kit,
Battery Heater

Measured Shot
Ether Kit,
Battery Heater

Measured Shot
Ether Kit,
Battery Heater

Measured Shot
Ether Kit,
Battery Heater

-30/-34

Coolant Heater

750 Watt
Immersion,
Circulation
Heater

1500 Watt
Immersion,
2000-2250 Watt
Circulation Heater

2000 Watt
Immersion,
2500-3500 Watt
Circulation Heater

(2) 2500 Watt
Circulation,
(2) 2500-3500 Watt
Circulation Heaters

Oil Pan Heater

-60/-51

Additional
Products

150 Watt
300 Watt Immersion 450 Watt Immersion 450 Watt Immersion
Immersion with
or
Thermostat
500 Watt Clamp-On
Measured Shot
Ether Kit,
Battery Heater

Measured Shot
Ether Kit,
Battery Heater

1-800-328-6108 or 952-941-9700 • phillipsandtemro.com

Measured Shot
Ether Kit,
Battery Heater

Measured Shot
Ether Kit,
Battery Heater

105

TECHNICAL INFORMATION
HEATERS
Avoid Common Engine Heater Installation Mistakes:
Do not use an engine heater when using
100% antifreeze.
A 50/50 mixture is recommended. Using a mixture
that is richer than 65% will cause the element to
fail prematurely.

Do not use petroleum based lubricants on the O-ring.
A petroleum based lubricant will significantly reduce the
life of the O-ring. Use antifreeze instead.

Do not run your engine while the engine heater
is plugged in.
This will create an air bubble around the element which
will then cause the element to burn out prematurely.
Do not plug in your engine heater prior to installing
to ”see if it works”.
Without being submerged in liquid, the heat generated
has nowhere to go and could result in serious burns.
How to safely test a heater.
Connect a multi-meter to the heater pins. A reading
between 5 ohms and 100 ohms indicates that the heater
is working correctly.

Do not over tighten the heater.
The O-ring will form an adequate seal when the heater
is torqued to the specifications in the instructions. Over
tightening will strip the screw threads and reduce the
quality of the seal.
After heater use, disconnect the extension cord from the
heater cord by firmly grasping each plug and pulling in
opposite directions.
Only grasp the plugs. Do not grasp, pull, yank or snap
the cords to disconnect power. Damage will result to the
power cord connections which could result in permanent
malfunction and even an electrical short.

DETERMINING CURRENT USAGE
The current usage of a heater can be determined based on a heaters volt and wattage rating.
Watts

Amperes @ 120 Volts

Amperes @ 240 Volts

Cost per hour *

75

0.63

0.31

.008

100

0.83

0.42

.010

150

1.25

0.63

.015

200

1.67

0.84

.020

300

2.50

1.25

.030

450

3.75

1.88

.045

500

4.17

2.08

.050

750

6.25

3.12

.075

850

7.08

3.54

.085

1000

8.33

4.16

.100

1500

12.50

6.25

.150

2000

16.67

8.34

.200

2500

20.83

10.42

.250

*Based on 10¢ per KWH

106

1-800-328-6108 or 952-941-9700 • phillipsandtemro.com

WARRANTY
This limited warranty is expressly limited to the Company’s products that have been
purchased by the original consumer purchaser or for purposes of resale or use in the
ordinary course of the purchaser’s business. The term original consumer purchaser
is defined as a person who purchases Company products for personal, family, or
household use.
The Company’s products are warranted against defects in materials and workmanship
for a period of one year from date of purchase by purchaser. Sales receipt or proof
of purchase must accompany product when returned to location of purchase. The
exclusive remedy for any product found to be defective under this limited warranty
consists of the repair or replacement of the defective product. This limited warranty
does not apply to defects which arise from normal wear and tear, accident, misuse,
abuse, neglect, mishandling, misapplication, faulty installation, modification, improper
or extraordinary use or use inconsistent with any instruction or recommendation
issued by the Company.
The foregoing limited warranty is exclusive and in lieu of all other warranties, whether
written or oral, express, implied or statutory.
*

EXCLUDES DUMP BODY VIBRA — 90 DAY WARRANTY *

NO IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE SHALL
APPLY. THE LIMITED WARRANTY CONTAINED HEREIN DOES NOT EXTEND TO INCIDENTAL OR
CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF A
BREACH OF THIS WARRANTY.

To obtain performance of this limited warranty, the alleged defective product must
be returned, together with reasonable proof of purchase, postage or freight prepaid,
directly to:
In U.S.A
Warranty Department
Phillips & Temro Industries Inc.
9700 West 74TH Street
Eden Prairie, MN 55344

In CANADA
Phillips & Temro Industries
c/o Purolator
1151 Martin Grove Road
Door 50
Etobicoke, Ontario, M9W 4W7

The Company will return the repaired or replaced product, postage or freight
prepaid. Final determination of defects shall be made in accordance with procedures
established by the Company.
This limited warranty gives the original consumer purchaser specific rights. You may
have other rights which vary from state to state or province to province depending
upon the location of your residence. Some states/provinces do not allow the exclusion
or limitation of incidental or consequential damages.
Manufacturer’s rights retained:
The Company reserves the right to make changes in design, additions or
improvements to any of its products at any time without incurring any obligation
whatsoever to install or replace the same or improve upon products previously
manufactured.
Note: Warranty credit will be issued at current year's price.

1-800-328-6108 or 952-941-9700 • phillipsandtemro.com

107

GARANTIE
Cette garantie limitée est expressément réservée aux produits de la Société qui ont été
achetés par le consommateur-acheteur d’origine ou aux fins de revente ou d’utilisation
dans le cours normal des affaires de l’acheteur. Le terme « consommateur-acheteur
d’origine » se définit comme la personne ayant fait l’acquisition des produits de la
Société à des fins personnelles, familiales ou domestiques.
Les produits de la Société sont garantis contre tout défaut matériel et vice de
fabrication pendant une période d’un an à partir de la date d’achat par l’acheteur.
Un reçu de caisse ou une preuve d’achat doit accompagner le produit lorsqu’il est
retourné au lieu de l’achat. Le recours exclusif offert pour tout produit qui se révélera
défectueux en vertu de cette garantie limitée consiste à réparer ou à remplacer le
produit défectueux. Cette garantie limitée ne s’applique pas aux défauts découlant
d’une usure normale, d’un accident, d’un mauvais emploi, d’un abus, d’une négligence,
d’une mauvaise manutention, d’une mauvaise utilisation, d’une mauvaise installation,
d’une modification, d’une utilisation inadéquate ou inhabituelle et d’une utilisation
contraire aux instructions ou aux recommandations fournies par la Société.
La garantie limitée ci-dessus est exclusive et remplace toute autre garantie, qu’elle
soit écrite ou orale, expresse, tacite ou statutaire.
* N’INCLUS PAS LE ‘ ‘ DUMP BODY VIBRA ‘ ‘ 90 JOURS DE GARANTIE. *
AUCUNE GARANTIE IMPLICITE DE QUALITÉ MARCHANDE ET DE CONVENANCE PRÉCISE N’EST
APPLICABLE. LA GARANTIE LIMITÉE CONTENUE AUX PRÉSENTES NE S’APPLIQUE PAS AUX DOMMAGES
INDIRECTS CAUSÉS PAR L’UTILISATION DE CE PRODUIT OU SURVENANT EN RAISON D’UNE VIOLATION
DE CETTE GARANTIE.

Pour obtenir l’exécution de cette garantie limitée, le produit présumé défectueux doit
être retourné accompagné d’une preuve d’achat raisonnable et l’affranchissement ou
le fret payé d’avance, directement à :
Aux ÉTATS-UNIS
Service de la garantie
Phillips & Temro Industries Inc.
9700 West 74TH Street
Eden Prairie, MN 55344

Au CANADA
Phillips & Temro Industries
c/o Purolator
1151 Martin Grove Road
Door 50
Etobicoke, Ontario, M9W 4W7

La Société retournera le produit réparé ou remplacé sans frais d’expédition.
La décision définitive quant aux défauts sera prise conformément aux procédures
établies par la Société.
Cette garantie limitée donne au consommateur-acheteur d’origine des droits
particuliers. Vous pouvez bénéficier d’autres droits qui varient selon votre état ou
votre province de résidence. Certains états n’autorisent pas l’exclusion ou la limitation
des dommages indirects.
Droits retenus par le fabricant:
La Société se réserve le droit de modifier ses produits, de faire des ajouts ou d’apporter
des améliorations en tout temps et sans aucune obligation d’installer ou de remplacer
lesdits produits ou les produits améliorés fabriqués ultérieurement.
Remarque: Garantie des crédits accordé correspondra au prix année en cours.

108

1-800-328-6108 or 952-941-9700 • phillipsandtemro.com

THERMAL TECHNOLOGY SOLUTIONS AND SYSTEMS
9700 West 74TH Street
Eden Prairie, MN 55344
Phone: 952-941-9700 or 800-328-6108
Fax: 952-941-2285
[email protected]
[email protected]
This publication for use throughout North America. Unless otherwise
noted, all products available in the United States & Canada.

©2016 PHILLIPS & TEMRO INDUSTRIES LIT0057P PRINTED IN U.S.A.