If your authorized Audi dealer fails or is unable to complete this work free of charge
within a reasonable time, please contact Audi Customer Experience at 1-800-253-2834
or via our “Contact Us” page at www.audiusa.com.

Checking your vehicle
for open Recalls and
Service Campaigns

To check your vehicle’s eligibility for repair under this or any other recall/service
campaign, please visit the Recall/Service Campaign Lookup tool at
www.audiusa.com and enter your Vehicle Identification Number (VIN).

We apologize for any inconvenience this matter may cause; however we are taking this action to help ensure your
vehicle continues to meet and exceed your expectations.
Sincerely,
Audi Customer Protection
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Audi dealer. 2020 Audi of America, Inc. and Audi Canada. All Rights Reserved.
May 2020

93D2 Page 6 of 96

Customer Letter Example (CANADA)
This notice applies to your vehicle:
Subject:

Service Action 93D2 – High-Voltage Battery
Certain 2016 Model Year Audi A3 e-tron Vehicles

Dear Audi Owner,
As part of Audi’s ongoing commitment to customer satisfaction, we are informing you of our decision to conduct a
service action on certain 2016 model year Audi A3 e-tron vehicles. Our records show that you are the owner of a
vehicle affected by this action.
What is the issue?

It is possible that the high-voltage battery housing bonded seam was made in a nonoptimal position. If this condition is present, moisture can enter the high-voltage
battery housing. The driver may be alerted to this condition by the illumination of a
high-voltage system warning indicator on the instrument cluster display.

What will we do?

Your authorized Audi dealer will disassemble and inspect the high-voltage battery for
corrosion.


If no corrosion is found, your dealer will install a new high-voltage battery
housing, which may take up to two days to complete.



If corrosion is found, the high-voltage battery will be replaced. Your dealer
will order the new battery for your vehicle, and once it arrives at the
dealership the replacement may take up to two days to complete.

Both the inspection and replacement (if necessary) will be performed for you free of
charge.
Precautions You
Should Take

Ensure all vehicle drivers have read the vehicle owner’s manual so they are familiar
with how the high-voltage battery system and associated warning lights work.
Please be aware that other conditions (unrelated to the issue described in this circular)
may cause a high-voltage battery system-related warning light in the vehicle to
illuminate. Customers should be prepared to cover diagnosis and repair costs
associated with these other, unrelated conditions.

What should you do?

In order to limit any possible inconvenience, please contact your authorized Audi dealer
as soon as possible to schedule this service. Please keep in mind that your dealer may
need additional time for the preparation of the repair, as well as to accommodate their
daily workshop schedule.
This service action will be available for you free of charge only until December 31,
2022. If you wish to have this service performed after that date, your dealer’s normal
parts and labor cost associated with this repair will apply.

Lease vehicles and
address changes

If you are the lessor and registered owner of the vehicle identified in this action, please
forward this letter immediately via first-class mail to the lessee within ten (10) days of
receipt. If you have changed your address or sold the vehicle, please fill out the
enclosed prepaid Owner Reply card and mail it to us so we can update our records.

Can we assist you
further?

If your authorized Audi dealer fails or is unable to complete this work free of charge
within a reasonable time, please contact Audi Customer Relations Monday through
Friday from 8AM to 8PM EST at 1-800-822-2834 or via our “Contact Audi Canada” page
at www.audi.ca.

We apologize for any inconvenience this matter may cause; however we are taking this action to help ensure your
vehicle continues to meet and exceed your expectations.
Sincerely,
Audi Customer Protection

The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Audi dealer. 2020 Audi of America, Inc. and Audi Canada. All Rights Reserved.
May 2020

93D2 Page 7 of 96

Campaign Work Procedure

93D2 Service Action

NOTE


These repair instructions may differ from the labor operations and labor times listed in ELSA.



Damages resulting from improper repair or failure to follow these work instructions are the dealer’s
responsibility and are not eligible for reimbursement under this action.



This procedure must be read in its entirety prior to performing the repair.



Due to variations in vehicle equipment and options, the steps/illustrations in this work procedure may not
identically match all affected vehicles.



Diagnosis and repair of pre-existing conditions in the vehicle are not covered under this action.



When working during extreme temperatures, it is recommended that the vehicle be allowed to acclimate
inside the shop to avoid temperature-related component damage/breakage.

Repair Overview



Inspect for evidence of water, moisture or
corrosion in high-voltage battery housing and:
o

Replace High-voltage battery housing
-OR-

o

Replace High-voltage battery

WARNING
If the vehicle arrives with logged DTC’s and GFF
indicates to replace the High-voltage battery, follow
the standard process outlined in Technical Bulletin
2049384.



Section A – Check for Previous Repair



Section B – High-voltage Battery Removal From Vehicle



Section C – High-voltage Battery Inspection Overview



Section D – Opening High-Voltage Battery Housing
o

Subsection 1 - Removing High-voltage Battery Module Group

o

Subsection 2 - Preparing New Battery Housing

o

Subsection 3 - Reinstalling Battery Module Group Into Battery Housing

o

Subsection 4 - Sealing Battery Housing



Section E – High-voltage Battery Replacement



Section F – Reinstalling High-voltage Battery Into Vehicle



Section G – Campaign Completion Stamp



Section H – Parts Return



Appendix A – Cooling System Tester Self-Test

The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Audi dealer. 2020 Audi of America, Inc. and Audi Canada. All Rights Reserved.
May 2020

93D2 Page 8 of 96



Appendix B - Cooling System Leak Test



Appendix C - VAS6911/3A Self-Test



Appendix D – High-voltage Battery Acclimation Test



Appendix E – High-voltage Battery Pressure Test



Appendix F – Bolt Torque Sequence



Appendix G – A3 Battery Portal Instructions (U.S. Dealers Only)

The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Audi dealer. 2020 Audi of America, Inc. and Audi Canada. All Rights Reserved.
May 2020

93D2 Page 9 of 96

Required Parts
Criteria

01

Quantity

Part Number

Part Description

1

5Q0.998.844

Battery housing repair kit

3

N 907.726.01

Cable holder

1

1K0.253.115.M

Muffler gasket

2

N 022.146.9

Nuts - Exhaust

2

5Q0.201.449.AE

Fuel line retaining clip

2

D 190.000.M2

Adhesive

1

D 181.220.A1

Primer (30 minute flash off time)

0.5

D 355.205.A2

Bonding agent (bottom)

3

D 009.500.25

Applicator

0.25

D 469.101.A3

Butyl adhesive

3.0 L

SEE ETKA

Coolant

1

5Q0.121.809.A

Lead seal

1

12E.010.006

Warning label (English)

1

12E.010.006.A

Warning label (French)

1

5Q0.998.590.A*

High-voltage battery (*ONLY IF CORROSION
IS FOUND ON BATTERY MODULES)

NOTE
The specified part numbers reflect the status at the start of this service action. Interim updates made in ETKA can
cause a listed part number to become unavailable. In this case, the new part number specified in ETKA should be
used.

The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Audi dealer. 2020 Audi of America, Inc. and Audi Canada. All Rights Reserved.
May 2020

93D2 Page 10 of 96

Battery Housing Repair Kit Contents
Position

Qty.

Description

Bag Number / Description

ETKA Part Number

1

2

Coolant pipe connecting
piece

QVC5KF000030 / Sealing Plug

5Q0.915.373.B

2

2

Bolts - Battery housing
cover, center (black)

QVC5LE000940 / M6 – 12 bolt

N/A

3

2

Washers - Battery housing
cover bolts

QVC5LE000870 / Washer
6.4x30x1.5

N/A

4

4

Bolts – J840 to battery
housing (bottom section)

QVC5LE001000 / M6 – 25 bolt

N 106.321.02

5

1

Gasket – J840 to battery
housing (bottom section)

QVC5KF000050 / BMC Hausing
Gasket

5Q0.915.433

6

2

Pressure relief plugs

QVC5KG000010 / Breather
Membrane

5Q0.998.841.B

7

18

Bolts – Battery housing
cover, perimeter

QVC5LE001730 / SPL SCR
M6X26 WASHER

N/A

8

2

Battery housing cover seals

QVC5KF000060 / Gasket Carrier
Modul

N/A

9

2

Bolts – SX6 cables to lower
battery housing (silver)

QVC5LE000500 / SPL SCR PAN
FL M8-16

5Q0.998.215.A

10

24

Bolts – Battery module group
to lower battery housing (M8
x 30)

N/A

WHT.008.861

The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Audi dealer. 2020 Audi of America, Inc. and Audi Canada. All Rights Reserved.
May 2020

93D2 Page 11 of 96

Required Tools

Trim Removal Wedge
-3409(or equivalent)

Holding Strap
-T40155(A)-

Adapter
-T10542A-

Padlock
-T40262/1-

(qty. 2)

(from Service Disconnect
Lock -T40262-)

Cooling System Tester

Digital Pressure Sensor

-VAG1274B-

-VAG1397B(A)-

Electric Cutter
-VAG1561A-

Pressure Gauge
-VAS611013-

Shop Crane
-VAS6100(or equivalent)

Scissor Lift Table - Audi
Set
-VAS6131/10-

The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Audi dealer. 2020 Audi of America, Inc. and Audi Canada. All Rights Reserved.
May 2020

93D2 Page 12 of 96

Scissor Lift Table - Q7 Set

Scissor Lift Table

-VAS6131/13-

-VAS6131B-

Pneumatic Gun - 10 Bar

Warning Sign - High
Voltage

-VAS6648-

Warning Sign - "Do Not
Switch On"
-VAS6650A-

-VAS6649-

Warning Sign - Battery
-VAS6786-

Warning Sign - "Do Not
Enter"

Cooling System Tester for
High Voltage Batteries

-VAS6881-

-VAS691005-

Shackle

Rubber Bungs

-VAS691009-