NHTSA ID Number: 10176055
Manufacturer Communication Number: Circular93D2REV3
TSB/Document Date: 2020-06-04
Summary
It is possible that the high-voltage battery
housing bonded seam was made in a non-optimal position. If this condition is present, moisture can enter the high-voltage battery housing. The driver may be alerted to this condition by the illumination of a high-voltage system warning indicator on the instrument cluster display. Updated claiming and work instructions in the event the coolant expansion tank is damaged.
tester -VAG1397A/B-.
If pressure drop does not exceed 0.020 bar
after 10 minutes, then the cooling system is
OK.
valve
C
on
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Audi dealer. 2020 Audi of America, Inc. and Audi Canada. All Rights Reserved.
May 2020
93D2 Page 79 of 96
Appendix C – -VAS6911/3A- Adapter Self-Test
This test ensures the -VAS6911/3A- does
not leak.
Test can be done with either -VAS1397A- or
-VAS1397B-.
-VAS1397B- shown.
Using VAG1397A:
o
Attach connection A of
-VAS691005/1- to connection II on
turbocharger tester -VAG1397A-.
Using VAG1397B:
o
Attach connection A of
-VAS691005/1- to connection II on
turbocharger tester -VAG1397B-.
Connect connection C of -VAS691005/1- to
hand pump -VAG1274B-.
Open cut-off valves A and C on
-VAS691005/1-.
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Audi dealer. 2020 Audi of America, Inc. and Audi Canada. All Rights Reserved.
May 2020
93D2 Page 80 of 96
Using -VAG1397A-:
o
Turn
on
turbocharger
-VAG1397A-.
o
Select setting II .
tester
Using -VAG1397B-:
o
Turn
on
turbocharger
-VAG1397B-.
o
Press the menu button until the
relative pressure setting (P-rel) is
displayed .
o
Wait approximately 30 seconds for
tester to calibrate.
o
Display will then read 0.000.
tester
CAUTION
Risk of Tool Damage!
Do not exceed 2.99 bar or irreparable damage to
the tool will occur.
No other tools should be attached to the
-VAS691005/1-.
Using hand pump -VAG1274B-, build up
pressure
until
turbocharger
tester
-VAG1397A/B- reads between 0.300 and
0.350 bar (300 - 350 mbar).
Close cut-off
-VAS691005/1-.
valve
C
on
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Audi dealer. 2020 Audi of America, Inc. and Audi Canada. All Rights Reserved.
May 2020
93D2 Page 81 of 96
Stabilize
Pressure loss
< 5 mbar = OK
Allow pressure to stabilize for one minute.
After the pressure is stable, wait 30 seconds
and check pressure drop on turbocharger
tester -VAG1397A/B-.
If pressure drop does not exceed 5 mbar after
30 seconds, then the -VAS6911/3A- is OK.
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Audi dealer. 2020 Audi of America, Inc. and Audi Canada. All Rights Reserved.
May 2020
93D2 Page 82 of 96
Appendix D – High-Voltage Battery Acclimation Test
This test ensures the pressure inside the highvoltage battery housing has stabilized. This
will ensure an accurate reading during the
high-voltage battery pressure test.
Do not place any objects on the highvoltage battery.
Leave cut-off valve C open on -VAS691005/1when assembling the tools. Otherwise,
damage to the pressure gauge -VAS611013may occur.
This test must be performed under constant
temperature conditions.
Test block is
-VAS6911/3A- .
Seal pressure equalization openings on
battery housing (top section) with sealing
plugs -VAS6911/15- .
removed
from
the
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Audi dealer. 2020 Audi of America, Inc. and Audi Canada. All Rights Reserved.
May 2020
93D2 Page 83 of 96
Pressure
increase < 0.5
mbar = OK
Ensure cut-off valves A and C are open on
-VAS691005/1- when connecting tools.
Attach connection B of the -VAS691005/1- to
the -VAS6911/3A- .
Attach -VAS6911/3A- to the high-voltage
battery connection .
Close cut-off valve C on -VAS691005/1-.
Observe the pressure
-VAS611013- .
After five minutes, the pressure should not
increase by more than 0.5 mbar.
If pressure does increase by more than 0.5
mbar, wait another 5 minutes to allow the
pressure inside the battery housing to
acclimate.
reading
on
the
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Audi dealer. 2020 Audi of America, Inc. and Audi Canada. All Rights Reserved.
May 2020
93D2 Page 84 of 96
Appendix E – High-Voltage Battery Pressure Test
This test ensures the high-voltage battery
does not leak.
This test must be performed with pressure
gauge -VAS611013-.
Do not place any objects on the highvoltage battery.
Leave cut-off valve C open on -VAS691005/1when assembling the tools. Otherwise,
damage to the pressure gauge -VAS611013may occur.
This test must be performed under constant
temperature conditions.
Test block is
-VAS6911/3A- .
Ensure the pressure equalization openings on
battery housing (top section) are sealed with
sealing plugs -VAS6911/15- .
removed
from
the
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Audi dealer. 2020 Audi of America, Inc. and Audi Canada. All Rights Reserved.
May 2020
93D2 Page 85 of 96
Ensure cut-off valves A and C are open on
-VAS691005/1- when connecting tools.
Connect connection C of -VAS691005/1- to
hand pump -VAG1274B-.
Open cut-off valves A and C on
-VAS691005/1-.
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Audi dealer. 2020 Audi of America, Inc. and Audi Canada. All Rights Reserved.
May 2020
93D2 Page 86 of 96
Connection A of -VAS691005/1- is
attached to pressure gauge -VAS611013-.
The -VAS6911/3A- is attached to the highvoltage battery connection .
Connection B of the -VAS691005/1- is
attached to the -VAS6911/3A- .
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Audi dealer. 2020 Audi of America, Inc. and Audi Canada. All Rights Reserved.
May 2020
93D2 Page 87 of 96
CAUTION
Risk of Tool Damage!
Do not exceed 35
the tool will occur.
Stabilize
mbar or irreparable damage to
Turn on pressure tester -VAS611013-.
Using hand pump -VAG1274B-, build up
pressure until pressure gauge -VAS611013reads 30.1 or 30.2 mbar.
Close cut-off
-VAS691005/1-.
Allow pressure to stabilize for one minute.
valve
C
on
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Audi dealer. 2020 Audi of America, Inc. and Audi Canada. All Rights Reserved.
May 2020
93D2 Page 88 of 96
After the pressure is stable, wait 10 minutes
and check pressure drop on turbocharger
tester -VAS611013-.
If pressure drop does not exceed 9 mbar after
10 minutes:
o
Pressure loss
< 9 mbar = OK
The high-voltage battery is OK.
If pressure drop exceeds 9 mbar after 10
minutes:
o
Generate pressure as outlined in this
High-voltage battery pressure test.
o
Spray battery housing seams and
other areas with soapy water to find
the leak.
o
The sealing plugs for the pressure
equalization are also locations where
leaks can potentially occur.
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Audi dealer. 2020 Audi of America, Inc. and Audi Canada. All Rights Reserved.
May 2020
93D2 Page 89 of 96
Appendix F – Battery Housing Bolt Torque Sequence
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Audi dealer. 2020 Audi of America, Inc. and Audi Canada. All Rights Reserved.
May 2020
93D2 Page 90 of 96
Appendix G – A3 Battery Portal Instructions (U.S. Dealers Only)
Register New User Account
1. Navigate to the A3 Battery Recall Portal: https://a3.evbatteryreturns.com/
2. On the Sign In screen, click the New User tab.
3. Complete all required fields and click the Continue button.
4. Enter a unique password, confirm that password and click the Register User button.
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Audi dealer. 2020 Audi of America, Inc. and Audi Canada. All Rights Reserved.
May 2020
93D2 Page 91 of 96
5. After successful registration, you will be sent an email with a link to verify your account email address. NOTE:
You will not be able to log into the portal until after your account has been verified. If you do not receive the
account verification email, be sure to whitelist our domain (evbatteryreturns.com) to prevent emails from being
sent to your spam folder.
Existing User Sign In
1. Navigate to the A3 Battery Recall Portal: https://a3.evbatteryreturns.com/
2. On the Sign In screen, ensure the Existing User tab is selected:
3. Enter the Email and Password used when registering your account and click the Sign In button.
4a. [OPTIONAL] If you cannot remember your password, click the ‘Forgot Password?’ link.
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Audi dealer. 2020 Audi of America, Inc. and Audi Canada. All Rights Reserved.
May 2020
93D2 Page 92 of 96
4b. [OPTIONAL] Ensure your email is entered correctly and click the Reset Password button to send an email
with a link to reset your password. Once reset, you can immediately log in with your new password.
First Portal Login (i.e. Complete Dealership Setup)
1. At first login, you will be asked to finish the setup of your dealership. Click the Complete Setup button.
2. Enter your Dealer No. and Dealer Name into the dialog window. Click the Next button.
3. Enter the primary address from where batteries will be picked up. Click the Submit button.
NOTE: This will set the default pickup address, however, it can be changed at any time.
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Audi dealer. 2020 Audi of America, Inc. and Audi Canada. All Rights Reserved.
May 2020
93D2 Page 93 of 96
Schedule Battery Return Request
1. From the Battery Returns view, click the Schedule Return button.
2. A dialog will be displayed. Confirm the Pickup Address either by selecting an existing address or entering a
new address. Click the Next button.
3. Confirm Contact Information for person responsible for managing the battery return. NOTE: Your user
information will be added by default; but fields can be updated to a more appropriate contact person if necessary.
Click the Next button.
4. Enter the VIN associated with the battery being returned and select the number of defective battery modules
identified (between 1 – 4 modules). Review the list of potential hazards related to the battery and select any that
apply. NOTE: In most cases, no hazards will be selected; however, if you are unsure about this selection you
should contact our support team at [email protected].
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Audi dealer. 2020 Audi of America, Inc. and Audi Canada. All Rights Reserved.
May 2020
93D2 Page 94 of 96
5. Read the notification about Department of Transportation training requirements and certify whether the
employee responsible for packaging and offering battery for shipment is approved to ship hazardous materials.
Click the Get Estimate button. NOTE: If you select “No hazmat trained employee. Use an authorized third party
instead.”, all costs related to the use of that third party (approximately $700 – $1,400) will be passed through to
your dealership.
6. Review Cost Estimate charges. Select the checkbox to signify your agreement with the payment Terms and
Conditions. Click Submit Request.
7. A table of Battery Return Requests will now be displayed. You may click on the View icon to see more details
for the request. Further, you may click the Schedule New Return button to submit an additional request.
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Audi dealer. 2020 Audi of America, Inc. and Audi Canada. All Rights Reserved.
May 2020
93D2 Page 95 of 96
Update User Information
1. From any screen, click the User Profile option.
2. From this screen, you can update User, Dealer, or Dealer Locations information.
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Audi dealer. 2020 Audi of America, Inc. and Audi Canada. All Rights Reserved.
May 2020
93D2 Page 96 of 96
- High density negative paste, improves performance and...
- Enhanced life alloy or Silver Calcium stamped alloy...
- Calcium lead positive grid, maximizes conductivity and...
- Robust envelope separator with puncture resistant back...
- Vent cap design that resists acid leakage
- High density negative paste, improves performance and...
- Enhanced life alloy or Silver Calcium stamped alloy...
- Calcium Lead positive grid, maximizes conductivity and...
- Robust Envelope Separator with puncture-resistant back...
- Vent cap design that resists acid leakage
Last update on 2026-06-29 / Affiliate links / Images from Amazon Product Advertising API
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: Circular93D2REV3
Replacement Service Bulletin Number:
MFR Communication Date: 2020-05-20
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: ELECTRICAL SYSTEM
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- Stay Updated with Lifetime Access: This obd2 scanner includes lifetime free software updates for all app service functions. With a single payment, enjoy full access to diagnostics, reset tools, and maintenance features — zero subscription fees. A budget-friendly choice for weekend mechanics, home car owners, and DIYers, supporting vehicles from 1996 onward. Come to us with your VIN to check compatibility.
- Full Bidirectional Control/Active Tests & Stable Wireless Connectivity: This car code reader features full bidirectional control, allowing you to send commands to the vehicle's ECU for active tests on components such as fuel pumps, injectors, A/C clutches, windows, sunroofs, and more. This car scanner diagnostic tool helps DIYers quickly diagnose and test vehicle parts, cutting down troubleshooting and repair time. With BT 4.0 wireless connectivity, you can enjoy cable-free diagnostics up to 33 feet. Stand in your garage and test windows, wipers, or even engine components—all without needing to move around your car.
- Portable Car Scanner with 26 Special Functions: Scheduled vehicle maintenance with the A30M car diagnostic scanner can keep your vehicle in peak condition and save you big on dealership trips. The XTOOL A30M obd2 scanner diagnostic tool features essential reset and relearn functions, such as Oil Reset, EPB Reset (Electronic Parking Brake Release), SAS, ABS Brake Bleeding, Throttle Body Relearn, Injector Coding, Crank Sensor Relearn, Headlight Adjustment, and Tire Size Reset. Note: Service functions may vary by vehicle model – check compatibility beforehand!
- Wide Compatibility CAN FD & FCA
Autoauth: This obd2 scanner diagnostic tool is compatible with over 85+ car brands from the U.S., Europe, and Asia, providing extensive coverage through a BT connection with your smartphone or iPad. Now upgraded to support the latest protocols, it includes FCA AutoAuth access for Chrysler, Jeep, Dodge, and Fiat (2018+), and supports CAN FD for GM (2020+) models, giving you greater access to newer vehicles and systems. Note: The FCA AutoAuth account is not included with the device. Users must register and pay separately through the official FCA AutoAuth website to access diagnostic functions for vehicles that require it. - Up to 8 Live Data Streams Graphing – Real-Time Graphing for Deeper Insight: This car scanner supports up to 8 live data streams simultaneously with intuitive, real-time graphing. Gain comprehensive insights into your vehicle’s performance, making it easier to spot issues, detect trends, and make informed diagnostic decisions with confidence.
- Comprehensive OBD2 Scanner with 16 Resets: The XTOOL D5S car code reader and vehicle reset tool provides an advanced diagnostic solution with 16 commonly needed reset functions, including Electronic Parking Brake Reset (EPB Reset), SAS, BMS Reset (Battery Test), Throttle Body Relearn, TPMS Reset, ABS Bleeding, Injector Coding, Gearbox Match, Suspension Adjustment, Headlight, Window Initialization, Crank Sensor Relearn and more. Equipped with CAN FD Protocol and FAC AutoAuth, the D5S obd2 scanner diagnostic tool ensures compatibility with a broad range of modern vehicles, allowing users to address common maintenance needs quickly. NOTE: Please Check the Compatibility before ordering.
- 4 Main System Car Scanner & Full OBD2 Diagnostics: The XTOOL D5S car code reader is ideal for home mechanics, DIYers, and professionals, providing access to Transmission/Engine/ABS/SRS systems to read DTCs, Live data can be displayed in text or up to 4 PID data graphs, along with full OBD2 diagnostics to check the engine light on, other obd2 issues and routine maintenance. This car diagnostic scanner ensures you can keep your vehicles in top condition, avoiding costly repairs or unexpected breakdowns. NOTE: Some vehicles display three systems after connection because the transmission and engine of some vehicles are integrated into one.
- Check Engine Code Reader & Real-Time Engine Monitoring: Whether you're a car owner, a DIYer, or run a repair shop, the XTOOL D5S obd2 scanner diagnostic tool makes engine diagnostics fast and frustration-free, reading and explaining trouble codes in seconds—no confusion. Check live data like fuel trim, 02 sensor voltage, RPM, and coolant temp to pinpoint mis~fires, rough idle, or sensor issues. After repairs, simply use the D5S check engine code reader and reset tool to turn off the check engine light and confirm the problem’s fixed—saving time, money, and unnecessary shop visits. - Note: If the check engine light comes back on, it indicates the original problem still exists.
- Portable Car Scanner for ABS and SRS: XTOOL D5S gives you peace of mind when ABS or airbag warning lights come on. It reads and clears ABS codes to help you fix brake sensor, traction control, or wheel speed issues, and supports ABS bleeding after repairs like caliper or master cylinder replacement. For airbag systems, it scans and clears SRS codes related to airbags, seatbelt tensioners, and crash sensors. Whether you're doing repairs at home or running a small shop, the D5S is a cost-effective solution for safety diagnostics. Note: If a fault code returns after clearing, it usually means the issue hasn’t been fully resolved. Please check the compatibility before ordering.
- Transmission Warning Light ON? Here’s the Transmission Diagnostic and Reset Tool You Need: The XTOOL D5S is more than just a basic car scanner—it’s an easy-to-use transmission diagnostic tool. From rough shifts to slipping gears, the D5S lets you read and clear transmission trouble codes, monitor real-time TCM data, and perform transmission resets after fluid changes or repairs. Whether you’re a hands-on car owner or a pro running a busy shop, this OBD2 scanner with transmission functions helps you catch problems early—saving you time, money, and future headaches.. Note: Clearing fault codes is equivalent to a reset on some vehicles, but not all. For help, contact XTOOL Tech Support.
- Save $500+/Year with Pro-Level Diagnostics -No Subscriptions: The Portable XTOOL Anyscan A30D OBD2 scanner diagnostic tool includes free lifetime software updates for all app service functions, without extra cost. With a single payment, enjoy full access to diagnostics, relearn scan tools, and maintenance features. A cost-effective, smart choice for car owners and DIY enthusiasts, compatible with vehicles from 1996 onward. Please provide the car VIN and the special functions you need in advance so that we can confirm compatibility
- Bi-Directional Control for Faster Troubleshooting: Unlike a basic code reader, the A30D bi directional scan tool sends commands directly to your vehicle’s ECU to actively test components like fuel pump, valves, wipers, windows, doors, sunroof, and headlamps right from your smartphone. See component responses in real time without disassembly—perfect for brake jobs, electrical issues, and hard-to-find problems. This bidirectional obd2 scanner helps pinpoint faults faster, reduce guesswork, and avoid replacing good parts. An efficient, easy-to-use car scanner diagnostic tool built for DIYers, home garage users, and small-shop technicians who want real two-way scanner, not just codes
- 19 Reset Functions for Routine Maintenance: The A30D car diagnostic scanner provides 19 relearn functions without extra charges, including EPB Reset for parking brake replacement, TPMS Reset after tire changes, ABS Auto Bleeding, Oil Reset, SAS Reset, BMS Reset, Throttle Relearn, Injector C0ding, Gear Learning, Crank/Crankshaft/Cam/Ckp Sensor Relearn Tool, Transmission Match, Seat Calibration, Airbag Repair and more. This XTOOL A30D automotive scanner diagnostic tool supports preventive care, helping extend vehicle life and reduce costly shop visits. Functions vary by vehicle make and year—plz confirm compatibility before purchase
- Stable BT Connection & All-System & 8 Pids Live Data: The A30D wireless OBD2 scanner delivers a fast and stable wireless connection up to 33 feet, letting you move freely around the vehicle without tangled cables. Pair with with Android 9.0+ and iOS 10.0+ devices to turn your phone into a mobile auto scanner—perfect for home garages, driveways, or on-the-spot repairs. This full system scanner for cars provides real-time access to all major modules, including Engine, Gearbox, ABS, SRS, AC and more. with clear graphs, meters, and up to 8 PIDs displayed at once. This car code reader makes system monitoring visual, simple, easy to understand, and offering data logging for playback and deeper
- Wide Compatibility with CAN-FD & FCA Support: The A30D car computer diagnostic reader works with most 1996 and newer vehicles with a standard OBD2 port, including for Ford, for GM, for Toyota, for Honda, for Nissan,for Hyundai etc, with ongoing updates covering more car models and functions later. It also supports newer communication protocols like CAN-FD and FCA AutoAuth (Personal AutoAuth account and active subscription required, not included with the device!for Chrysler, for Dodge, for Jeep, for Fiat models). It is a future-ready automotive scanner diagnostic tool for households with multiple vehicles or part-time techs. Coverage vary by cars, plz check the compatibility first
Last update on 2026-06-23 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.