Installation and Conversion Instructions

982
25 / 19 ENU

9122

9

Apple CarPlay Interface 9WT

Information:

Retrofitting

Model Year:

As of 2017

Note:

•
•

For vehicles that already have UI2 installed, order parts kit 982.044.900.07.
For vehicles without UI2, order parts kit 982.044.900.06.

The installation of the Apple® CarPlay interface (I-no. 9WT) provides the hardware required in the vehicle
for using iPhone® apps even in the vehicle via the Porsche Communication Management (PCM ) system.
The following requirements must be met:
•
•

iPhone 5 or higher with iOS 7.1 or higher
Availability of Apple® CarPlay

You will find information about the available regions at https://support.apple.com.
Different work must be carried out and/or additional parts must be ordered, depending on vehicle
equipment.

Figure 1
Parts Info:

982.044.900.06

 Apple® CarPlay interface, set Figure 2

982.044.900.07

 License key

Depending on vehicle equipment, the following additional parts must be ordered:
Vehicle WITHOUT Navigation (I-no. 7Q0).
9A7.035.50.401

1x

GPS antenna

9P4.979.005

1x

GPS antenna line

999.513.076.40

10 x

Tie-wrap

Tequipment

Mar 5, 2020
Page 1 of 18

9

982

Installation and Conversion Instructions

ENU 25/19

9122

955.606.838.00

5x

Tie-wrap with fixing clip

999.507.195.40

1x

Expanding spring, 10.7 x 26.4

Vehicle WITHOUT Voice control (QH0).
N .910.207.011

1x

Internal serration screw, M18 x 1.5 x 26 - self-locking

N .907.991.021

1x

Internal serration screw, M18 x 1.5 x 18 - self-locking

9xx.613.xxx.xx

1x

Steering-column switch (see table)

1

Before ordering: Activate the vehicle identification number (VIN) filter in the Porsche Electronic Parts
Catalogue (PET) and select the relevant Item No.
Installed steering-column switch

Required steering-column switch

Part No.

Part No.

991.613.043.50

991.613.051.50

970.613.043.50

970.613.051.50

991.613.045.50

991.613.053.50

970.613.045.50

970.613.053.50

970.613.047.50

970.613.055.50

970.613.049.50

970.613.057.50

991.613.011.50

991.613.019.50

970.613.011.50

970.613.019.50

991.613.013.50

991.613.021.50

970.613.013.50

970.613.021.50

970.613.015.50

970.613.023.50

970.613.017.50

970. 613.025.50

Alternatively, the following instructions will help you to identify the required steering-column switch.
1.
2.
3.

2

Mar 5, 2020
Page 2 of 18

Look for the standard steering-column switch in the Porsche Electronic Parts Catalogue (PET). To
do this, activate the VIN filter in the PET2 .
Take note of the I-nos.
Replace the I-no. 9WC (Without Rear Seat Entertainment and without Mirrorlink) with the
I-no. 9WT (Mirrorlink/GAL).

If the VIN filter in the PET does not work, the standard steering-column switch must be identified based
on the I-no. in the vehicle information (PIWIS information system).

Tequipment

Installation and Conversion Instructions

982
25 / 19 ENU

9122

9

Parts list:

Figure 2

Tools:

Power supply wire harness with five socket contacts  Figure 2
-1Connecting line (USB interface → connection point in center
console)  Figure 2 -2Connecting line (PCM → USB/iPod control unit)  Figure 2 -3-

982.044.900.06

1x

9P1.979.002

1x

9P4.979.022

1x

9P1.979.018

1x

9P1.979.004

1x

9A7.642.953.00

1x

Connecting line (USB/iPod control unit → connection point in
center console)  Figure 2 -4Connecting line (USB/iPod control unit → glove box)  Figure 2
-5USB/iPod control unit  Figure 2 -6-

9A7.642.222.00

1x

Multimedia interface  Figure 2 -7-

9P1.035.222

1x

USB interface  Figure 2 -8-

9P1.035.925.A

1x

USB/iPod control unit holder  Figure 2 -9-

999.073.498.01

1x

Screw

N 020.904.4

15 x

Tie-wrap (not shown)

955.606.838.00

5x

Tie-wrap with plug-in socket (not shown)

–––

1x

Licence key (not shown)

9900 - PIWIS Tester 3
Nr.32 - Multiple-tooth socket-wrench insert

Installing:

1

Preparatory work:
1.1

Connect battery charger.  Workshop Manual '2X00IN Battery trickle charging'

1.2

Only for vehicles without Navigation (I-no. 7Q0):
Open the convertible top.

Tequipment

Mar 5, 2020
Page 3 of 18

9

982

Installation and Conversion Instructions

ENU 25/19

9122

2

1.3

Remove glove compartment.  Workshop Manual '681519 Removing and installing glove
compartment'

1.4

Remove PCM.  Workshop Manual '911019 Removing and installing PCM display and
operator control unit'

1.5

Remove center console.  Workshop Manual '681719 Removing and installing centre
console'

Only for vehicles without Navigation (I-no. 7Q0):
2.1

2.2

Carry out preparatory work for installing GPS antenna and GPS antenna line.
2.1.1

Remove sun visors and sun visor holders.  Workshop Manual '682319 Removing
and installing sun visor'

2.1.2

Remove center roof trim panel.  Workshop Manual '708319 Removing and
installing front roof trim panel'

2.1.3

Remove front lock.  Workshop Manual '610519 Removing and installing front
lock'

2.1.4

Remove front roof trim panels at the sides.  Workshop Manual '708319
Removing and installing front roof trim panel'

2.1.5

Remove A-pillar trim panel at the right.  Workshop Manual '705719 Removing
and installing A-pillar trim panel'

Install GPS antenna.
2.2.1

Attach angled antenna connector

 Figure 3 -1- to the GPS antenna
 Figure 3 -2- until the antenna
connector engages securely.

Figure 3

Mar 5, 2020
Page 4 of 18

Tequipment

Installation and Conversion Instructions
2.2.2

2.3

982
25 / 19 ENU

9122

9

Insert GPS antenna  Figure 4 -1into the mounting  Figure 4 -aand clip it in  Figure 4 -b-.

Route GPS antenna line as follows:
Front roof trim panel → along wire harness
for sun visor → A-pillar → along wire harness
for dashboard (glove compartment) → PCM
installation slot

Figure 4
2.3.1

Route GPS antenna line  Figure 5
-1- along the standard wire harness
for the sun visor and A-pillar.

Figure 5