NHTSA ID Number: 10162639
Manufacturer Communication Number: NTB17-034i
TSB/Document Date: 2019-07-15
Summary
2013-2017 SENTRA AND VERSA SEDAN, AND 2014-2017 VERSA NOTE; CVT JUDDER AND/OR P0746/P0965/P17F0/P0846 STORED This bulletin applies only to vehicles equipped with a Continuously Variable Transmission (CVT). This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
31214-3JX9A
1
31214-X429B
31340-X429E
999MP-LT5460P
1
(1) (3)
Control Valve
Replacement
KIT-CONTROL VALVE
(For Sentra)
KIT-CONTROL VALVE
(For Versa Sedan and NOTE)
3170E-X428C
1
3170E-X428B
1
CVT
Replacement
CVT Assembly (6)
(7)
1
Applies to all
repairs
Nissan
NS-3 CVT Fluid (1) (4)
Additional Engagement Tool O-Rings (5)
WASHER-DRAIN
(CVT Oil Pan Drain Plug Gasket)
Lens Swab packet
999MP-CV0NS3 As needed
11440
As needed
11026-JA00A
1
J-51963
(8)
(1) Nissan NS-3 CVT Fluid and Loctite 5460 Sealant can be ordered through the Nissan
Maintenance Advantage program: Phone: 877-NIS-NMA1 (877-647-6621) or Website:
Order via link on dealer portal www.NNAnet.com and click on the “Maintenance
Advantage” link.
(2) One container of Loctite 5460 Sealant is good for approximately 5 repairs. This sealant
is not included in any kit.
(3) Bill out Loctite 5460 Sealant (or equivalent) under expense code 008. Do not include
the Loctite 5460 Sealant part number on the claim.
(4) For warranty repairs, Nissan NS-3 CVT Fluid and Loctite 5460 Sealant must be used.
For customer pay repairs, Nissan NS-3 CVT and Loctite 5460 Sealant Fluid or their
equivalents are recommended.
(5) Engagement tool will initially come with 10 O-rings. Additional O-rings are available from
Tech•Mate online: www.nissantechmate.com, or by phone: 1-800-662-2001.
(6) If the CVT is being replaced, no other parts in the table above, except NS-3 CVT fluid or
equivalent, are needed.
(7) Refer to the Electronic Parts Catalog for the correct part number.
(8) Shop supplies.
131/138
NTB17-034i
CLAIMS INFORMATION
Submit a Primary Part (PP) type line claim using the following claims coding:
If P17F0 is NOT stored, belt inspection is performed, and Sub-assembly is replaced (belt
inspection shows signs of belt slip, NG)
OPERATION
PFP
OP CODE
SYM DIA FRT
JD01AA
JD023A
CVT R&R
(2)
(1)
Inspect CVT Belt, Belt = NG (Includes
ZE 32
JX36AA
1.2
control valve R&I)
Replace CVT Sub-assembly
JX45AA
3.0
Reprogram TCM
JE99AA
(2)
(1) Reference the Parts Information Table and use the Kit-Pulley Part Number as the
Primary Failed Part (PFP).
(2) Reference the current Nissan Warranty Flat Rate Manual and use the indicated Flat
Rate Time (FRT).
OR
If P17F0 IS stored and Sub-assembly is replaced (no belt inspection required)
OPERATION
PFP
OP CODE
SYM DIA FRT
JD01AA
(2)
JD023A
(1)
Replace Valve Body with P17F0 stored
ZE 32
JX56AA
0.8
Replace CVT Sub-assembly
JX45AA
3.0
Reprogram TCM
JE99AA
(2)
(1) Reference the Parts Information Table and use the Kit-Pulley Part Number as the
Primary Failed Part (PFP).
(2) Reference the current Nissan Warranty Flat Rate Manual and use the indicated Flat
Rate Time (FRT).
CVT R&R
EXPENSE CODE
EXPENSE CODE
008
DESCRIPTION
Sealant
MAX AMOUNT
$12.46
CLAIMS INFORMATION continued on next page.
132/138
NTB17-034i
CLAIMS INFORMATION (continued)
OR
Submit a Primary Part (PP) type line claim using the following claims coding:
If pan inspection shows excessive large debris and CVT is replaced
OPERATION
PFP
OP CODE
SYM DIA FRT
Inspect CVT Pan for Excessive Debris = NG
JX49AA
0.3
(1)
ZE 32
JD01AA
Replace CVT
(2)
JD023A
(1) Reference the Electronic Parts Catalog and use the applicable CVT assembly part
number as the Primary Failed Part (PFP).
(2) Reference the current Nissan Warranty Flat Rate Manual and use the indicated Flat
Rate Time (FRT).
OR
If P17F0 is NOT stored, belt inspection is performed, and only Control Valve is replaced
(belt inspection shows NO signs of belt slip, OK)
OPERATION
PFP OP CODE SYM DIA FRT
Inspect CVT Belt, Belt = OK
JX37AA
0.4
(1)
ZE 32
Replace Valve Body
JD48AA
(2)
Reprogram TCM
JE99AA
(2)
(1) Reference the Parts Information Table and use the Kit-Control Valve Part Number as
the Primary Failed Part (PFP).
(2) Reference the current Nissan Warranty Flat Rate Manual and use the indicated Flat
Rate Time (FRT).
NOTE: FRT allows adequate time to access DTC codes. No other diagnostic
procedures subsequently required. Do NOT claim any diagnostic OP Codes with this
claim.
133/138
NTB17-034i
KIT PARTS REFERENCE TABLE
NOTE:
This Table is for reference only. Part numbers listed cannot be ordered individually.
These part numbers are for identification of the correct part within the kit (part
number is listed on the bag for each individual part).
Some parts have more than one part number listed. In this case, one of the part
numbers listed will be in the kit.
KIT-CONTROL VALVE (3170E-X428B or 3170E-X428C) PARTS REFERENCE
(Kit Content)
REFERENCE
#
1
2
3
DESCRIPTION
PART NUMBER
QTY:
VALVE ASSY – CONTROL (Control valve)
(For Sentra)
31705-X428C
or 31705-X429E
or 31705-X422C
1
VALVE ASSY – CONTROL (Control valve)
(For Versa Sedan or Versa NOTE)
GASKET-OIL PAN (Oil pan gasket)
STRAINER ASSY-OIL, AUTO TRANS
(Oil pan strainer)
31705-X428B
31397-3JX0A
31728-3XX0A
or 31728-3XX0B
or 31728-3JX0B
1
1
KIT-PULLEY (31214-3JX9A or 31214-X429B) PARTS REFERENCE (Kit Content)
REFERENCE
#
DESCRIPTION
5
PULLEY ASSY
(Sub assembly: Belt & Pulley)
(For Sentra)
PULLEY ASSY
(Sub assembly: Belt & Pulley)
(For Versa Sedan or Versa NOTE)
SNAP RING KIT (Snap ring kit)
6
7
SEAL-O RING (Input shaft O ring)
8
4
134/138
PART NUMBER
QTY:
31209-3JX9A
or 31209-X429C
1
31209-X429B
31506-3JX8B
31377-3JX0E
or 31377-X420B
or 31377-3XX2B
or 31377-X424C
31526-3MX0A
or 31526-X420C
or 31526-3XX0C
31526-8E000
or 31526-28X0C
1
11
1
2
NTB17-034i
KIT PARTS REFERENCE TABLE (Continued)
KIT-OIL PUMP (31340-X429E) PARTS REFERENCE (Kit Content)
REFERENCE
#
DESCRIPTION
9
BOLT (Torque converter case bolts)
10
11
12
PIN-RET (Manual shaft roll pin)
13
14
GSKT-OIL PUMP (Oil pump gasket)
15
SEAL-O RING (Oil filter cover O ring)
16
FLTR ASSY-OIL,AUTO TRANS (Oil filter)
17
18
20
SEAL ASSY-OIL (Torque converter Seal)
SEAL-OIL,DIFF (Axle seals)
SEAL-O RING
(Primary/Secondary/Output Sensor O-ring)
SLEEVE-OIL DIST
21
RING-SEAL
19
135/138
PART NUMBER
31377-X420B
or 31377-3JX0E
or 31377-3XX2B
or 31377-X424C
31528-1XZ0A
or 31528-1XA01
or 31528-1XX0A
31526-X420B
or 31526-50X0D
or 31526-3JX0B
or 31526-3XX0B
31906-1XF0A
31340-X420B
or 31340-3JX0D
or 31340-X420A
or 31340-3XX0B
31366-3JX0B
or 31366-3JX0A
or 31366-3XX0A
31526-3JX3A
or 31526-3JX1B
31726-28X0A
or 31726-3JX0A
or 31726-3XX0A
31375-3JX1A
38342-3VX0A
QTY:
19
1
1
1
1
1
1
1
1
2
31526-1XG0C
3
31374 80X01
31525 3JX0B
or 31525 X420A
1
2
NTB17-034i
PART KITS VISUAL REFERENCE
The following Figures show the smaller components of individual kits.
KIT- CONTROL VALVE is not shown.
KIT-PULLEY. Sub-assembly not shown
Figure M
KIT-OIL PUMP
Figure N
136/138
NTB17-034i
CVT Assembly Replacement Approval Procedures
If CVT inspection indicates CVT assembly replacement is required:
a. Complete the PCC CVT Preauthorization Form in ASIST.
b. Attach the required video (15 seconds or less) to the CVT Preauthorization
Form.
Failure to submit a continuous video showing evidence of abnormalities
and the VIN will cause immediate denial of request for CVT unit
replacement.
c. Call the PCC for authorization at 800-973-9992 (opt 2).
IMPORTANT: Make sure the video has a clear image of the VIN on the F.M.V.S.S.
certification label (VIN label).
137/138
NTB17-034i
AMENDMENT HISTORY
PUBLISHED DATE
REFERENCE
DESCRIPTION
April 26, 2017
NTB17-034
Original bulletin published.
June 2, 2017
NTB17-034a
Changes on pages 22, 27, 34, 43, 63, 91, and
103.
August 14, 2017
NTB17-034b
Changes on pages 2, 3, 9, 17, 23, 34, 35, 43,
44, 45, 83, 86 and 89 through 126.
October 10, 2017
NTB17-034c
APPLIED VEHICLES, PARTS INFORMATION,
and CLAIMS INFORMATION sections revised,
and changes on pages 94, 103, 116, 125, and
126.
November 20, 2017
NTB17-034d
Table B revised, and changes on pages 2, 6, 9
and 10.
February 1, 2018
NTB17-034e
APPLIED VEHICLE section and Table B
revised, and changes to page 116.
August 10, 2018
NTB17-034f
Table B revised, and DTC added to If You
Confirm.
November 14, 2018
NTB17-034g
Special tool added to page 6, and procedure to
use the tool added to pages 77-79.
February 15, 2019
NTB17-034h
Title, Repair Overview, Table B, and IF YOU
CONFIRM and CLAIMS INFORMATION
sections revised. CONTROL VALVE
REPLACEMENT and ERASE LEARNING
VALUE procedures added. ERASE MEMORY
DATA procedure removed. Change on page
11.
June 26, 2019
NTB17-034i
Table B revised.
138/138
NTB17-034i
- REDUCED - oxidation and lower volatility at high temperature
- ALLOWS - high-temp operation without varnishing valves and...
- IMPROVED THERMAL STABILITY - maintains viscosity levels, and...
- POPULAR TRANSMISSION FLUID FOR - Dexron-VI, MerconSP...
- WHY RED LINE - Established in 1979, Red Line Products...
- CUTTING EDGE TECHNOLOGY - Shockproof technology designed to...
- QUIET SMOOTH SHIFTING - V-Twin Transmission oil dampens...
- IMPROVES PERFORMANCE - Transmission fluid that dramatically...
- POPULAR POWESPORTS OIL FOR - UTVs & Side by Sides, ATVs...
- WHY RED LINE - Established in 1979, Red Line Products...
Last update on 2026-06-12 / Affiliate links / Images from Amazon Product Advertising API
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: NTB17-034i
Replacement Service Bulletin Number:
MFR Communication Date: 2019-06-26
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: POWER TRAIN
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [2026 Top-Tier Hardware and Software Upgrade]: Topdon ArtiDiag900 Lite scanner has enhanced hardware and latest features, including Android 11.0, 5x faster CPU, 10000mAh battery for 12 hours of continuous operation, stable wireless diagnosis with Bluetooth 5.0, 8-inch touchscreen. Added bi-directional control, wireless diagnosis, battery testing (optional), and DTC repair guide
- [TOPDON Bidirectional Scan Tool]: This bidirectional obd2 scanner sends commands to the vehicle's ECU for active testing, enabling users to accurately and quickly locate faulty components such as injectors, coolant pumps, windows, wipers, headlights, mirrors, etc. The bidirectional control scanner is the ideal choice for workshops/automotive repair shops as it significantly reduces mechanic's diagnostic time.
- [Wireless Bluetooth Diagnostic Experience]: The AD900 Lite scan tool comes with a Bluetooth 5.0 VCI, supporting a wireless diagnostic range of up to 33 feet (10 meters), allowing you to diagnose without being confined to cables or tight spaces. Stable and fast wireless diagnosis provides a comfortable repair environment. It also offers VCI cables to increase connectivity options.
- [DTC Repair Guide Function]: Easily diagnose issues with your vehicle and receive guidance on repairs with the topdon scan tool's fault code definitions for all systems,maximize your diagnostic capabilities. This function is compatible with Chrysler
/Dodge/Jeep/Fiat 2010-2014 and expanding with continual updates,the AritDiag 900 Lite car diagnostic scanner is the must-have tool for any technician or DIY enthusiast. - [OE-Level Full System Diagnostics]:AritDiag900 Lite full system diagnostic scanner can scan ALL available modules(Engine, Transmission, Airbag, ABS, ESP, TPMS, Gateway, Steering, Radio, Air conditioning, ect.) to✔read ECU info, ✔read/clear codes, ✔view live data stream, ✔retrieves freeze-frame, ✔perform active tests, and more. With just a simple click, it provides you with accurate and in-depth diagnostics.
- Bi-Directional Control, Quickly Locate Problems: Turn your phone into a professional diagnostic tool. You can send commands from your phone to the ECU to test injectors, cooling fans, headlights, A/C clutch, windows, wipers, and more. See which one doesn't respond. Helps you quickly locate the problem and save time. No need to tear things apart, avoid blind disassembly.
- Flexible Subscription, Choose Advanced Features as Needed: TopScan Lite provides free-for-life access to core diagnostics, including full system scan, code reading, performance tests, and repair information. After purchase, advanced features (bi-directional control, service operations, live data, code clearing, and AI functions) are free-for-the-first-year. After the first year, if you want to use advanced features, you need to subscribe on a monthly, quarterly, or yearly basis. As new models and reset functions are updated, the tool will also be continuously upgraded.
- Full System Diagnostics, No Fault Hides: Unlike basic diagnostic tools that only cover 4 systems, TopScan can scan all systems. Read and clear trouble codes, view live data streams, and generate a complete vehicle health report – all issues are clear at a glance. Covers 10,000+ vehicle models and is compatible with 99.99% of vehicles.
- AI Assistant - TopFix: Think of TopFix as your personal AI mechanic. It leverages a repair database and OEM data to deliver clear, step-by-step repair solutions. Features include AI Q&A, one-click translation, and a full repair log, making your diagnostic process simpler and more efficient.
- 8+ Hot Resets, Keep Your Car in Top Shape: One-tap resets for oil, throttle, EPB, steering angle, DPF, ABS, BMS, and airbag. It enables car owners to easily perform essential maintenance, ensuring the vehicle stays in optimal condition and extends its service life.
- Dual WiFi & 10.1" Touchscreen: Provides a stable, high-speed wireless link 3x faster than bluetooth, and a responsive, professional interface. Topdon ONE obd2 scanner diagnostic tool ensures smooth, non-lagging diagnostic scan, boosting mechanic efficiency
- J2534 Pass-Thru Support: The included ONE VCI supports the J2534 standard, allowing it to function as a pass-thru device when paired with OEM diagnostic software.Through TOPDON’s RLink platform, technicians can perform dealer-level coding, expanding in-house capabilities without investing in multiple factory automotive scan tools
- OE Topology Mapping: Visualize the vehicle’s ECU network exactly as it’s built.Zoom, pan, and highlight specific modules to pinpoint component issues with precision.Topology mapping displays real-time communication between modules
- 50 Plus Service Functions: Covers high-demand services like ADAS calibration, DPF regen, TPMS reset, ABS bleed, and throttle adaptation.Expands your service menu, allows you to charge premium rates, and turns away zero jobs due to lack of tooling. Vehicle-specific functionality may vary
- Advaned ECU Coding: 10 of the most serviced brands in North America, including full ECU coding and flash hidden support for BMW, VW, Au-di, Benz, Porsche, Toyota, Ni ssan and more. Enables module replacement, feature customization, and personal settings with automatic backup or restore.Lets your shop safely offer high-margin customization services, attracting more customers and boosting profit
Last update on 2026-06-12 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.