TIS Service Bulletin

Page 1 of 8

SI B01 05 18
Warranties

July 2018
Technical Service

N63T ENGINE FUEL INJECTORS: LIMITED WARRANTY
EXTENSION TO 10 YEARS/120,000 MILES
New information provided by this revision is preceded by this symbol

.

This Service Information bulletin supersedes SI B01 05 18 dated January 2018
What’s New:
• ALPINA B7 Models are now listed separately
• Warranty Information section updated

MODEL
F01 (750i) (N63T
Engine) Model Years
2013 and 2014
produced 7/1/2012 to
6/30/2014

F01 (ALPINA B7 SWB)
(N63T Engine) Model
Years 2013 and 2014
produced 7/12/2012 to
6/28/2014

F01 (750i xDrive)
(N63T Engine) Model
Years 2013 and 2014
produced 7/2/2012 to
6/25/2014

F01 (ALPINA B7 xDrive
SWB) (N63T Engine)
Model Years 2013 and
2014 produced
7/9/2012 to 6/23/2014

F02 (750Li) (N63T
Engine) Model Years
2013 and 2014
produced 7/2/2012 to
6/26/2014

F02 (750Li xDrive)
(N63T Engine) Model
Years 2013 and 2014
produced 7/2/2012/to
6/27/2014

F02 (ALPINA B7 LWB)
(N63T Engine) Model
Years 2013 and 2014
produced 7/6/2012 to
6/16/2014

F02 (ALPINA B7 xDrive
LWB) (N63T Engine)
Model Years 2013 and
2014 produced
7/9/2012 to 6/24/2014

F06 (650i Gran Coupe)
(N63T Engine) Model
Years 2013, 2014 and
2015 produced
7/2/2012 to 6/30/2014
only

F06 (650i xDrive Gran
Coupe) Model Years
2013, 2014 and 2015
produced 7/2/2012 to
6/30/2014 only

F07 (550i Gran
Turismo) (N63T
Engine) Model Years
2013 and 2014
produced 7/2/2012 to
6/13/2014

F07 (550i xDrive Gran
Turismo) (N63T
Engine) Model Years
2013 and 2015
produced 7/2/2012 to
6/20/2014

F10 (550i xDrive
F10 (550i Sedan)
Sedan) (N63T Engine)
(N63T Engine) Model
Model Year 2014
Year 2014 produced
produced 7/24/2013 to
6/27/2013 to 6/30/2014
6/25/2014

F12 (650i Convertible)
(N63T Engine) Model
Years 2013, 2014 and
2015 produced
7/2/2012 to 6/30/2014
only

F12 (650i xDrive
Convertible) (N63T
Engine) Model Years
2013, 2014 and 2015
produced 7/2/2012 to
6/30/2014

F13 (650i Coupe)
(N63T Engine) Model
Year 2013, 2014 and
2015 produced
7/2/2012 to 6/30/2014
only

F15 (X5 xDrive50i)
(N63T Engine) Model
Year 2014 produced
5/8/2013 to 6/28/2014

F13 (650i xDrive
Coupe) (N63T Engine)
Model Year 2013, 2014
and 2015 produced
7/1/2012 to 6/30/2014
only

https://www.bmwtis.net/tiscode/cgi-bin/bulletin.aspx?sie_path=/tsb/bulletins/htm_store/467... 8/1/2018

TIS Service Bulletin

Page 2 of 8

Note: The “Model” information above is for informational purposes only, it is not the only deciding
factor.
To determination vehicle eligibility and that this coverage applies, always perform a VIN-specific DCSnet
Warranty Inquiry first; please refer to the “Eligible Vehicles” section of this bulletin for further details.

INFORMATION
For the eligible vehicles, BMW of North America, LLC (“BMW NA”) is extending the limited warranty for the
vehicle’s engine fuel injectors to:


10 years/120,000 miles as determined by the vehicle’s original in-service date





This “component-specific” limited warranty extension applies
to defects in materials or workmanship.
This coverage is subject to the same vehicle eligibility
requirements, limitations, and exclusions that apply to the
BMW New Vehicle Limited Warranty for Passenger Cars and
Light Trucks.

Note: This bulletin is notice of a “limited warranty extension.” This is NOT a notice of a Recall
or Service Action.
There is no immediate repair required unless the BMW vehicle is currently experiencing this problem.
Customer Notification Letter
Even though this is NOT a Recall, BMW NA will be sending VIN-specific customer notification letters in a
phased release.

ELIGIBLE VEHICLES
To assist you in identifying those vehicles that have this “component-specific” extended limited warranty
coverage, the DCSnet Warranty Vehicle Inquiry has been updated with the VIN and Component-specific
“Vehicle Comment” shown below:

For this vehicle, the engine fuel injectors limited warranty for defects in materials or
workmanship has been extended to 10 year/120,000 mile as determined from the original inservice date. This coverage is subject to the same vehicle eligibility requirements,
limitations, and exclusions that apply to the BMW New Vehicle Limited Warranty for
Passenger Cars and Light Trucks. Please see SI B01 05 18 (DC 13 53 90 02 00).
Note: Before performing a repair and submitting a claim under this extended coverage, first confirm
that the vehicle has the above “Notice of Limited Warranty Extension” in the DCSnet Warranty Inquiry “Vehicle
Comments” section.
If the vehicle has the above flag, the vehicle was determined to be eligible and included by meeting all of the
applicable criteria, for example:

https://www.bmwtis.net/tiscode/cgi-bin/bulletin.aspx?sie_path=/tsb/bulletins/htm_store/467... 8/1/2018

TIS Service Bulletin

Page 3 of 8



Series;



Models;



Model Years;



Engine type; and



Production date (strictly by the mm/dd/yyyy version, in AIR dd/m/yyyy).

Based on applying all of the above criteria, if you have ELW eligibility and/or coverage questions, please
contact the Warranty department through IDS by selecting “Coverage, Policy and Coding” prior to performing
any repairs.

PARTS INFORMATION
Note: Please refer to the Electronic Parts Catalog (ETK/EPC), using the customer’s VIN to locate the
applicable replacement part numbers.






Only order these parts in the quantities needed to address customers’ vehicles that have confirmed
failures.
“Only in conjunction with” parts: When applicable, if ETK/EPC item identifies additional part(s) that
must also be replaced/installed “in-conjunction” with performing a covered repair, these “required”
additional items are also covered under the terms of this extended limited warranty.
Also refer to ETK/EPC and the ISTA repair instructions for onetime-use fasteners/screws and
other information regarding repair-related gaskets, seals, fluid and/or lubricants that also need to be
replaced/used and claimed.

WARRANTY INFORMATION
The engine fuel injectors component-specific limited warranty extension to 10 years/120,000 miles applies to
“eligible US-specification BMW vehicles” that are registered, operated and have their covered repair performed
by an authorized BMW center in the United States (including Puerto Rico).
The existing limited warranty coverage for the whole vehicle and other components has not changed.
This coverage supersedes the coverage that is provided under the BMW Certified Pre-Owned Program or any
BMW Group Vehicle Service Contract that applies to the vehicle.
Should the engine fuel injector(s) fail again, these component are covered by the remaining portion of the
extended limited warranty coverage period.
Non-Qualifying Repairs
Non-US specification vehicles, ineligible vehicles, eligible vehicles operated and repaired outside the United
States and Puerto Rico and/or the diagnosis and repair of other unrelated issues are not covered under the
terms of this limited warranty extension.
Qualifying Repairs - Claim Submission
Claim this work with the defect code and the applicable labor operations provided below.

Defect Code:

1353900200

F0x F1x N63T US version, injector

https://www.bmwtis.net/tiscode/cgi-bin/bulletin.aspx?sie_path=/tsb/bulletins/htm_store/467... 8/1/2018

TIS Service Bulletin

Page 4 of 8

All except the ALPINA Models

Labor Operation:

Labor Allowance:

Description:

00 00 006

Refer to KSD2/AIR

Performing “vehicle test” (with vehicle diagnosis
system – checking faults) (Main work)

Refer to KSD2/AIR

Performing “vehicle test” (with vehicle diagnosis
system – checking faults) (Plus work)

Refer to KSD2/AIR

Connect an approved battery charger/power
supply (indicated in KSD2 as “Charging battery”)

Work time (WT)

Performing vehicle diagnosis – test module

Or:
00 00 556
And:
61 21 528
And, as necessary
61 00 006

If you are using a Main labor code for another repair, use the Plus code labor operation 00 00 556 instead of 00
00 006.
And:
Replacing Injector(s) on Cylinder Bank 1 (Cylinders 1 to 4)

Labor Operation:

Labor Allowance:

Description:

00 65 556

Refer to KSD2

Replace one injector in cylinder bank 1

2 FRU

Replace one additional injector (Two total)

2 FRU

Replace two additional injectors (Three total)

2 FRU

Replace three additional injectors (Four total)

And, if applicable:
00 65 558
And, if applicable:
00 65 558
And, if applicable:
00 65 558
And/or:
Replacing Injector(s) on Cylinder Bank 2 (Cylinders 5 to 8)

Labor Operation:

Labor Allowance:

Description:

00 65 557

Refer to KSD2

Replace one injector in cylinder bank 2

2 FRU

Replace one additional injector (Two total)

2 FRU

Replace two additional injectors (Three total)

And, if applicable:
00 65 558
And, if applicable:
00 65 558

https://www.bmwtis.net/tiscode/cgi-bin/bulletin.aspx?sie_path=/tsb/bulletins/htm_store/467... 8/1/2018

TIS Service Bulletin

Page 5 of 8