Loading...

NHTSA ID Number: 10133447

Manufacturer Communication Number: Emissions Recall

TSB/Document Date: 2018-04-16


Summary

3.0L TDI vehicles were equipped with undisclosed Auxiliary Emission Control Devices which are not permitted by emissions regulations. Install updated engine control module (ECM) software, transmission control module (TCM) software and hardware to bring affected vehicles into regulatory compliance. Updated resale information included.


Emissions Recall
Code: 23V7
REVISION
Subject
Release Date
Revision Summary
Affected Vehicles

3.0L TDI Engine Emissions System Modification
November 29, 2017
Updated resale information included.
U.S.A.:

2015-2016 MY VolkswageneBay logo Touareg 3.0L TDI Generation 2.2

Check Campaigns/Actions screen in Elsa on the day of repair to verify that a VIN qualifies for repair under this
action. Elsa is the only valid campaign inquiry & verification source.

Campaign status must show “open.”

If Elsa shows other open action(s), inform your customer so that the work can also be completed at
the same time the vehicle is in the workshop for this campaign.

Problem Description

3.0L TDI vehicles were equipped with undisclosed Auxiliary Emission Control Devices which
are not permitted by emissions regulations.

Corrective Action

Install updated engine control module (ECM) software and transmission control module (TCM)
software to bring affected vehicles into regulatory compliance.

Code Visibility

On or about November 6, 2017, affected vehicles will be listed on the Inventory Vehicle Open
Campaign Action report under My Dealership Reports. A list will not be posted for dealers who
do not have any affected vehicles. The campaign code will show open on affected vehicles in
Elsa and affected vehicles will be identified with this campaign code in the VIN Lookup tool at
www.vw.com.

Owner Notification
Loaner/Rental Vehicle
– REQUIRED!

Owner notification will take place on or about November 6, 2017.
To remain compliant with the Settlement Agreement, Service Consultants must complete a
Loaner/Rental label and it must be signed by the customer. This documents each customer’s
decision to accept or decline the offer for a loaner or rental vehicle while the Approved
Emissions Modification was being performed on their vehicle.

Affix the completed label to the Repair Order and follow the new photo documentation
requirements for this label in the IN-FORM tool.

The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized VolkswageneBay logo dealer. 2017 VolkswageneBay logo Group of America, Inc. All Rights Reserved.
November 2017

23V7 Page 1 of 25

Emissions Campaigns
Requirements
(CALIFORNIA ONLY)

The California Air Resources Board and the Department of Motor Vehicles (DMV) require
emissions-related campaigns to be completed prior to vehicle registration renewal. When
campaign work is done you must provide the owner with a signed “Vehicle Emission Recall –
Proof of Correction” certificate (RC EMISCAVWAU). Order certificates online via the
Compliance Label Ordering portal at www.vwhub.com.

Additional Information

Please alert everyone in your dealership about this action, including Sales, Service, Parts
and Accounting personnel. Contact Warranty if you have any questions.
Fill out and affix the appropriate TDI Recall Proof of Completion label and the appropriate
Supplemental Vehicle Emissions Control Information Label after work is complete. Additional
shipments will be released based on the volume of completed repairs claimed through
SAGA. The parts will not be available for order through the website at this time.

The information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These procedures
are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To determine whether
this information applies, contact an authorized VolkswageneBay logo dealer. 2017 VolkswageneBay logo Group of America, Inc. All Rights Reserved.
November 2017

23V7 Page 2 of 25

Claim Entry Instructions
After campaign has been completed, enter claim as soon as possible to help prevent work from being duplicated
elsewhere. Attach the Elsa screen print showing action open on the day of repair to the repair order.
If customer refused campaign work:
 U.S. dealers: Submit request via WISE under the Campaigns/Update/Recall Closure option.
Service Number

23V7

Damage Code

0099

Parts Vendor Code
Claim Type
Causal Indicator
Vehicle Wash/Loaner
Criteria I.D.

WWO
Sold vehicle: 7 10
Mark labor as causal
Do not claim vehicle wash or loaner under this action
01
Perform software update, *install TDI Recall Proof of Completion label and install
Supplemental Vehicle Emissions Control Information Label; complete TDI IN-FORM
Validation Tool requirements; top off AdBlue tank.
Labor operations:
2360 25 99

90 T.U.

Quantity
Up to 11.00

Part Number
G 052910A2

Description
AdBlue (one bottle = 0.5 gallon/ 1.89 Liter)

*Labels are sent free of charge. They cannot be charged to this campaign.
– LOANER/RENTAL MUST BE CLAIMED ON A SEPARATE LINE –
DO NOT PUT ON CAMPAIGN CLAIM
LOANER/RENTAL

Claim Type: A1A
Service #: CU01
Damage Code: 0010
Removed Part : MOB
Outside LO Number : CU010000
DO NOT PUT LOANER/RENTAL ON CAMPAIGN CLAIM

The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized VolkswageneBay logo dealer. 2017 VolkswageneBay logo Group of America, Inc. All Rights Reserved.
November 2017

23V7 Page 3 of 25

Campaign Work Procedure

23V7 Emissions Recall

At this time, affected new and used vehicles in dealer inventory are not
included in this emissions modification release.

NOTE
Damages resulting from improper repair or failure to follow these work instructions are the dealer’s responsibility
and are not eligible for reimbursement under this action.

Required Parts
Quantity

Part Description
AdBlue

Up to 19.5L

Part Number
Any, as required

IMPORTANT!
AdBlue Ordering Information

Any AdBlue part number in any quantity/volume is acceptable for use.

For claiming purposes, for every 0.5 gallons of AdBlue used, one unit of G 052910A2 should be
entered onto the SAGA claim regardless of which AdBlue part number was used.

Required Labels
Quantity
1

Part Description
TDI Proof of Completion Label

1

VECI Label

1

VECI Label

Part Number
7P0 010 023 A
--AND-059 010 533 BF
--OR-059 010 533 BG

Vehicle
MY 2015 and 2016 Touareg
MY 2015 Touareg
MY 2016 Touareg

IMPORTANT!
Maintaining Your TDI Campaign Label Supply

SAGA claims count! Warranty Administrators should enter TDI claims promptly to ensure
labels can be allocated to support future repairs.

TDI Labels are allocated daily, free of charge, based on the count of TDI claims entered in
SAGA.

TDI labels cannot be ordered through the Compliance Label Ordering Portal. If you have
questions, please email labelrequest@vweBay logo.com.

The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized VolkswageneBay logo dealer. 2017 VolkswageneBay logo Group of America, Inc. All Rights Reserved.
November 2017

23V7 Page 4 of 25

Required Tools

VAS6150X - Diagnostic
Tester (or equivalent)

GRX3000VAS – Battery
Tester/Charger (or
equivalent)

VAS6154 - Vehicle
Communication
Interface (or equivalent)

Service Modification Validation Web App

tdi-inform.track360.com

TIP
This web application is compatible with desktops,
laptops, Apple and Android mobile devices running the
most current versions of FireFox, Chrome, Safari, or
Explorer as well as iOS 9+ on iPads and iPhones.
NOTE
RISK of Non-payment!
Not using the IN-FORM tool to document and validate
the modification will stop the processing of payment for
your dealership even if the modification has been
completed. Look for the image below to indicate labor
operations, parts, or labeling that requires
IN-FORM tool image documentation.

The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized VolkswageneBay logo dealer. 2017 VolkswageneBay logo Group of America, Inc. All Rights Reserved.
November 2017

23V7 Page 5 of 25

Emissions Modification Instruction
Section A - Check for Previous Repair

Enter the VIN in Elsa and proceed to the
“Campaign/Action” screen.

TIP
On the date of repair, print this screen and keep a copy
with the repair order.

Confirm the Campaign/Action is open .
If the status is closed, no further work is required.

Note the Applicable Criteria ID for use
in determining the correct work to be done and
corresponding parts associated.

Check for other Open campaign actions .

Other Open campaign actions must be completed
prior to releasing the vehicle to the customer.

Proceed to Section B

Section B – Check for Service Initiation
NOTE
RISK of Non-payment!
Not using the IN-FORM tool to document and validate
the modification will stop the processing of payment
for your dealership even if the modification has been
completed. Look for the image below to indicate
labor operations, parts, or labeling that requires
IN-FORM tool image documentation.

The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized VolkswageneBay logo dealer. 2017 VolkswageneBay logo Group of America, Inc. All Rights Reserved.
November 2017

23V7 Page 6 of 25

NOTE
RISK of Non-payment!
Ensure that the “check mark” is present
prior to beginning any repair.

Check the Service Initiation Form for the
presence of the “check mark” .
o

If “check mark” is NOT present,
DO NOT proceed with any repair.

o

If “check mark” is present,
initiate Service Modification
Documentation Form and continue work

DO NOT proceed with any work unless you can initiate
the Service Modification Documentation Form.

Proceed to Section C

Section C – Check for Pre-existing MIL ON conditions and Vehicle Modifications

Perform a visual inspection of the intake,
exhaust, and emissions systems.
o If the visual inspection of the intake, exhaust,
or emissions equipment reveals damage or
concerns, STOP, create a VTA ticket and
contact the VolkswageneBay logo Technicians
Helpline.
o If the visual inspection of the intake, exhaust,
or emissions equipment reveals no damage
or concerns, continue the work procedure.

Check for vehicle modifications from original
equipment.
o If vehicle modifications from original
equipment related to emissions components
are found, STOP, create a VTA ticket and
contact the VolkswageneBay logo Technicians
Helpline.
o If vehicle modifications from original
equipment related to emissions components
are not found, continue the work procedure.

Check for illumination of the MIL .
o If MIL is illuminated, STOP, create a VTA
ticket and contact the VolkswageneBay logo
Technicians Helpline.
o If MIL is not illuminated, continue the work
procedure.
TIP

VTA cases regarding MIL ON conditions require a GFF
diagnostic log to be uploaded at the time of first contact.
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized VolkswageneBay logo dealer. 2017 VolkswageneBay logo Group of America, Inc. All Rights Reserved.
November 2017

23V7 Page 7 of 25

NOTE
RISK of Non-payment!
The purpose for this step is to document vehicle
condition prior to initiation of this action and does
not authorize the repair of any pre-existing
conditions.
Proceed to Section D

Section D – Refill AdBlue

Lift the rear compartment carpet and slide it
back.

123

SaleBestseller No. 1
TOPDON RLink J2534 Pass-Thru Programmer, OEM Reprogramming and Diagnostic Tool, Enhanced J2534 VCI, Supports J2534/D-PDU/CAN-FD/DoIP, Compatible with 18+ Vehicle Brands, No OE Software Provided
289 Reviews
TOPDON RLink J2534 Pass-Thru Programmer, OEM Reprogramming and Diagnostic Tool, Enhanced J2534 VCI, Supports J2534/D-PDU/CAN-FD/DoIP, Compatible with 18+ Vehicle Brands, No OE Software Provided
  • J2534 Pass-Thru Programmer: TOPDON RLink J2534 is an...
  • All-in-One OEM Diagnostics: This J2534 ECU programming tool...
  • Proven Performance You Can Trust: Backed by over 10000 real...
  • Integrated Excellence, Always Up-to-Date: Featuring the...
  • Efficiency Meets Versatility: Engineered to support three...
SaleBestseller No. 2
TOPDON RLink J2534 Reprogramming Tool, High-Speed J2534 Pass-Thru Programmer, OEM Reprogramming and Diagnostic Tool, Supports J2534/D-PDU/CAN-FD/DoIP, 17+ Vehicle Brands Supported
  • Advanced VCI Box, Industry-leading J2534 Pass-Thru...
  • High-Speed OEM-Level Diagnostics & Programming: Unlock true...
  • Coverage for 17 Car Brands & Ultra Reliability: Works...
  • User-Friendly RLink Platform & Expert Support: TOPDON’s...
  • 6.6 ft USB-C Cable & Portable Storage Case: The RLink J...

Last update on 2026-06-23 / Affiliate links / Images from Amazon Product Advertising API


 


If the PDF is very large, it may not load in the preview below.

Download PDF [887.20 KB]


Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.

If the TSB PDF does not show, download or view it on the NHTSA Website.

Click on the (+) Plus Sign

Then Click on Associated Document(s)


Search NHTSA Database for Recalls

View Latest Recalls


Search NHTSA Database for Vehicle Investigations

View Latest Vehicle Investigations


Search NHTSA Database for Vehicle Complaints

View Latest Vehicle Complaints


TSB/Document ID: Emissions Recall

Replacement Service Bulletin Number:

MFR Communication Date: 2017-11-29

MFR Internal Campaign ID/Software Version:

Communication Type: Service Bulletin/Repair Instructions

NHTSA Components: ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL

MFR Component System:

MFR Component Subsystem:


Previous TSB

Next TSB



SaleBestseller No. 1
OBD2 Scanner Diagnostic Tool XTOOL A30M V2.0, 2026 Wireless Bidirectional Code Reader, 26 Reset, All System, Crank Sensor Relearn, EPB, Throttle Relearn, Lifetime Free Updates, Android & iOS
  • Stay Updated with Lifetime Access: This obd2 scanner includes lifetime free software updates for all app service functions. With a single payment, enjoy full access to diagnostics, reset tools, and maintenance features — zero subscription fees. A budget-friendly choice for weekend mechanics, home car owners, and DIYers, supporting vehicles from 1996 onward. Come to us with your VIN to check compatibility.
  • Full Bidirectional Control/Active Tests & Stable Wireless Connectivity: This car code reader features full bidirectional control, allowing you to send commands to the vehicle's ECU for active tests on components such as fuel pumps, injectors, A/C clutches, windows, sunroofs, and more. This car scanner diagnostic tool helps DIYers quickly diagnose and test vehicle parts, cutting down troubleshooting and repair time. With BT 4.0 wireless connectivity, you can enjoy cable-free diagnostics up to 33 feet. Stand in your garage and test windows, wipers, or even engine components—all without needing to move around your car.
  • Portable Car Scanner with 26 Special Functions: Scheduled vehicle maintenance with the A30M car diagnostic scanner can keep your vehicle in peak condition and save you big on dealership trips. The XTOOL A30M obd2 scanner diagnostic tool features essential reset and relearn functions, such as Oil Reset, EPB Reset (Electronic Parking Brake Release), SAS, ABS Brake Bleeding, Throttle Body Relearn, Injector Coding, Crank Sensor Relearn, Headlight Adjustment, and Tire Size Reset. Note: Service functions may vary by vehicle model – check compatibility beforehand!
  • Wide Compatibility CAN FD & FCAeBay logo Autoauth: This obd2 scanner diagnostic tool is compatible with over 85+ car brands from the U.S., Europe, and Asia, providing extensive coverage through a BT connection with your smartphone or iPad. Now upgraded to support the latest protocols, it includes FCAeBay logo AutoAuth access for ChryslereBay logo, JeepeBay logo, DodgeeBay logo, and FiateBay logo (2018+), and supports CAN FD for GM (2020+) models, giving you greater access to newer vehicles and systems. Note: The FCAeBay logo AutoAuth account is not included with the device. Users must register and pay separately through the official FCAeBay logo AutoAuth website to access diagnostic functions for vehicles that require it.
  • Up to 8 Live Data Streams Graphing – Real-Time Graphing for Deeper Insight: This car scanner supports up to 8 live data streams simultaneously with intuitive, real-time graphing. Gain comprehensive insights into your vehicle’s performance, making it easier to spot issues, detect trends, and make informed diagnostic decisions with confidence.
SaleBestseller No. 2
XTOOL D5S OBD2 Scanner, 16 Resets, Car Scanner for Engine ABS SRS Transmission, Crank Sensor Relearn, Throttle Relearn, EPB, Code Reader for Cars and Trucks, CAN FD&FCA Scan Tool, Lifetime Free Update
  • Comprehensive OBD2 Scanner with 16 Resets: The XTOOL D5S car code reader and vehicle reset tool provides an advanced diagnostic solution with 16 commonly needed reset functions, including Electronic Parking Brake Reset (EPB Reset), SAS, BMS Reset (Battery Test), Throttle Body Relearn, TPMS Reset, ABS Bleeding, Injector Coding, Gearbox Match, Suspension Adjustment, Headlight, Window Initialization, Crank Sensor Relearn and more. Equipped with CAN FD Protocol and FAC AutoAuth, the D5S obd2 scanner diagnostic tool ensures compatibility with a broad range of modern vehicles, allowing users to address common maintenance needs quickly. NOTE: Please Check the Compatibility before ordering.
  • 4 Main System Car Scanner & Full OBD2 Diagnostics: The XTOOL D5S car code reader is ideal for home mechanics, DIYers, and professionals, providing access to Transmission/Engine/ABS/SRS systems to read DTCs, Live data can be displayed in text or up to 4 PID data graphs, along with full OBD2 diagnostics to check the engine light on, other obd2 issues and routine maintenance. This car diagnostic scanner ensures you can keep your vehicles in top condition, avoiding costly repairs or unexpected breakdowns. NOTE: Some vehicles display three systems after connection because the transmission and engine of some vehicles are integrated into one.
  • Check Engine Code Reader & Real-Time Engine Monitoring: Whether you're a car owner, a DIYer, or run a repair shop, the XTOOL D5S obd2 scanner diagnostic tool makes engine diagnostics fast and frustration-free, reading and explaining trouble codes in seconds—no confusion. Check live data like fuel trim, 02 sensor voltage, RPM, and coolant temp to pinpoint mis~fires, rough idle, or sensor issues. After repairs, simply use the D5S check engine code reader and reset tool to turn off the check engine light and confirm the problem’s fixed—saving time, money, and unnecessary shop visits. - Note: If the check engine light comes back on, it indicates the original problem still exists.
  • Portable Car Scanner for ABS and SRS: XTOOL D5S gives you peace of mind when ABS or airbag warning lights come on. It reads and clears ABS codes to help you fix brake sensor, traction control, or wheel speed issues, and supports ABS bleeding after repairs like caliper or master cylinder replacement. For airbag systems, it scans and clears SRS codes related to airbags, seatbelt tensioners, and crash sensors. Whether you're doing repairs at home or running a small shop, the D5S is a cost-effective solution for safety diagnostics. Note: If a fault code returns after clearing, it usually means the issue hasn’t been fully resolved. Please check the compatibility before ordering.
  • Transmission Warning Light ON? Here’s the Transmission Diagnostic and Reset Tool You Need: The XTOOL D5S is more than just a basic car scanner—it’s an easy-to-use transmission diagnostic tool. From rough shifts to slipping gears, the D5S lets you read and clear transmission trouble codes, monitor real-time TCM data, and perform transmission resets after fluid changes or repairs. Whether you’re a hands-on car owner or a pro running a busy shop, this OBD2 scanner with transmission functions helps you catch problems early—saving you time, money, and future headaches.. Note: Clearing fault codes is equivalent to a reset on some vehicles, but not all. For help, contact XTOOL Tech Support.
SaleBestseller No. 3
XTOOL Anyscan A30D OBD2 Scanner Diagnostic Tool - Bidirectional Scan Tool Wireless - Lifetime Updates & 19 Resets Crank Sensor EPB Throttle Relearn - Full System Car Code Reader for iPhone & Android
  • Save $500+/Year with Pro-Level Diagnostics -No Subscriptions: The Portable XTOOL Anyscan A30D OBD2 scanner diagnostic tool includes free lifetime software updates for all app service functions, without extra cost. With a single payment, enjoy full access to diagnostics, relearn scan tools, and maintenance features. A cost-effective, smart choice for car owners and DIY enthusiasts, compatible with vehicles from 1996 onward. Please provide the car VIN and the special functions you need in advance so that we can confirm compatibility
  • Bi-Directional Control for Faster Troubleshooting: Unlike a basic code reader, the A30D bi directional scan tool sends commands directly to your vehicle’s ECU to actively test components like fuel pump, valves, wipers, windows, doors, sunroof, and headlamps right from your smartphone. See component responses in real time without disassembly—perfect for brake jobs, electrical issues, and hard-to-find problems. This bidirectional obd2 scanner helps pinpoint faults faster, reduce guesswork, and avoid replacing good parts. An efficient, easy-to-use car scanner diagnostic tool built for DIYers, home garage users, and small-shop technicians who want real two-way scanner, not just codes
  • 19 Reset Functions for Routine Maintenance: The A30D car diagnostic scanner provides 19 relearn functions without extra charges, including EPB Reset for parking brake replacement, TPMS Reset after tire changes, ABS Auto Bleeding, Oil Reset, SAS Reset, BMS Reset, Throttle Relearn, Injector C0ding, Gear Learning, Crank/Crankshaft/Cam/Ckp Sensor Relearn Tool, Transmission Match, Seat Calibration, Airbag Repair and more. This XTOOL A30D automotive scanner diagnostic tool supports preventive care, helping extend vehicle life and reduce costly shop visits. Functions vary by vehicle make and year—plz confirm compatibility before purchase
  • Stable BT Connection & All-System & 8 Pids Live Data: The A30D wireless OBD2 scanner delivers a fast and stable wireless connection up to 33 feet, letting you move freely around the vehicle without tangled cables. Pair with with Android 9.0+ and iOS 10.0+ devices to turn your phone into a mobile auto scanner—perfect for home garages, driveways, or on-the-spot repairs. This full system scanner for cars provides real-time access to all major modules, including Engine, Gearbox, ABS, SRS, AC and more. with clear graphs, meters, and up to 8 PIDs displayed at once. This car code reader makes system monitoring visual, simple, easy to understand, and offering data logging for playback and deeper
  • Wide Compatibility with CAN-FD & FCAeBay logo Support: The A30D car computer diagnostic reader works with most 1996 and newer vehicles with a standard OBD2 port, including for FordeBay logo, for GM, for ToyotaeBay logo, for HondaeBay logo, for NissaneBay logo,for HyundaieBay logo etc, with ongoing updates covering more car models and functions later. It also supports newer communication protocols like CAN-FD and FCAeBay logo AutoAuth (Personal AutoAuth account and active subscription required, not included with the device!for ChryslereBay logo, for DodgeeBay logo, for JeepeBay logo, for FiateBay logo models). It is a future-ready automotive scanner diagnostic tool for households with multiple vehicles or part-time techs. Coverage vary by cars, plz check the compatibility first

Last update on 2026-06-23 / Affiliate links / Images from Amazon Product Advertising API


 


This product presentation was made with AAWP plugin.

Share to...