21. Select Start.

Step
21

Figure 9
22. When COMPLETED is displayed, select Next.

Step
22

Figure 10

12/40

NTB15-037e

23. Operate the ignition per the on screen instructions.

Ignition status

Timer

Progress display

Figure 11

24. When OK is displayed, select Next.

Step
24

Figure 12

13/40

NTB15-037e

25. Move the shift selector to P, then select Next.

Step
25

Figure 13
26. Operate the shift selector per the on-screen instructions.
a. Move the shift selector; P>R>N>D>P
b. Confirm the center display meter indicates the correct selector position.
27. Select Next.

Step
26

Step
27

Figure 14

14/40

NTB15-037e

28. Find the TCM Part Number
(see Figure 15) and write it on
the repair order.
NOTE: This is the current Part
Number (P/N).
Step
28

29. Compare the P/N you wrote
down to the numbers in the
Current TCM Part Number
column in Table A below.

Figure 15
30. Comparison results:


If there is a match, continue with the reprogramming procedure.



If there is not a match, reprogramming is not needed. Skip to ERASE MEMORY
DATA on page 29.

Table A
MODEL

MODEL YEAR
2013
2014

Sentra

Versa Sedan

Versa NOTE

2015

CURRENT TCM PART NUMBER: 31036 3SG0A, 3SG0B, 3SG0C, 3SG9B, 3SG9C,
3SR0A, 3SR0B, 3SR0C, 3SR9B, 3SR9C
9AM2A, 9AM2B, 9AM2C, 9AM9B, 9AM9D, 9AM9E
4AT0A, 4AT0B, 4AT0C, 4AT0D, 4AT9A, 4AT9D,
4AT9E

2016

4AF6A, 4AF6B, 4AF9D

2017

4FY0A, 4FY0B, 4FY0C

2013

9KB1B, 9KB1C, 9KB1D, 9KB9E, 9KJ9E

2014

3BE0A, 3BE0B, 3BE9A, 3BE9C

2015

9KE0A, 9KE0B, 9KE0C, 9KE9C, 9KE9E

2016

9KN0A, 9KN0B, 9KN0C, 9KN8D, 9KN8E

2017
2014

9KN2A, 9KN2B, 9KN2C
3VB2A, 3VB2B, 3VB2C, 3VB8C, 3VB9D

2015

3VB6A, 3VB9A, 3VB9B, 3VB9C, 3VB9E, 3WC9D

2016

3VB4A, 3VB4B, 3VB4C, 3VB4D, 3VB7A, 3WC9E

2017

9ME0A, 9ME0B, 9ME0C

31. Select Save.

15/40

NTB15-037e

32. Use arrows (if needed) to view and read all precautions.
33. Check the box confirming the precautions have been read.
34. Select Next.

Step
32

Step
33

Step
34

Figure 16

NOTE: If you get the screen in Figure 17 and it is blank (no reprogramming listed), it
means there is no reprogramming available for this vehicle. Close C-III plus and refer
back to ASIST for further diagnosis.

TRANSMISSION

Figure 17

16/40

NTB15-037e

35. Read the Current Part Number and Part Number After Reprogramming. They
should be different.

36. Select Next.

Step 35
These numbers
should be
different

Step
36

Figure 17a

17/40

NTB15-037e

37. Make sure OK is highlighted green (battery voltage must be between 12.0 and 15.5
Volts).
38. Select Next.
IMPORTANT: Battery voltage must stay between 12.0 and 15.5 Volts during
reprogramming or TCM reprogramming may be interrupted and TCM may be damaged.

Monitor battery
voltage here

Step
37
Step
38

Figure 18

39. Make sure OK is highlighted green for all Judgements then select Start.

Monitor battery
voltage here

EXAMPLE

Step
39

Figure 19
18/40

NTB15-037e

40. Select USA/CANADA Dealers.
41. Select OK.

Step
40

Step
41

Figure 20
NOTE:


The above screen may not display if the CONSULT PC has remained ON since the
last reprogramming.



If the CONSULT PC is not connected to the Internet, the screen in Figure 21 will
display.

Figure 21

19/40

NTB15-037e

42. Enter Username and Password.


Before reprogramming will start, you will be required to enter your User Name and
Password.



The CONSULT PC must be connected to the Internet (Wi-Fi or cable).
 If you do not know your User Name and Password, contact your Service
Manager.

43. Select Submit.
 There will be a short pause while the username and password are
authenticated.
 Once authentication completes, TCM reprogramming will automatically begin
and the screen in Figure 23 on the next page will be displayed.

Step
42
Step
43

Figure 22

20/40

NTB15-037e

44. Wait for both progress bars to complete.

Step
44

Figure 23
45. When the screen in Figure 24 displays, the reprogramming is complete.
NOTE: If the screen in Figure 24 does not display (which indicates reprogramming did
not complete), refer to the information on the next page.
46. Disconnect the battery charger (GR8) from the vehicle.
47. Select Next.

Step
47

Figure 24
NOTE: Additional steps/operations are required before C-III plus will provide the final
reprogramming confirmation report. Continue with the reprogramming procedure on
page 23.
21/40

NTB15-037e

If reprogramming does not complete and the “!?” symbol displays as shown in
Figure 25:


Check battery voltage (12.0 –
15.5V).



Ignition ON, engine OFF.



External Bluetooth® devices are
OFF.



All electrical loads are OFF.



Select Retry and follow the on
screen instructions.
NOTE: Retry may not go
through on first attempt and can
be selected more than once.

Figure 25

If reprogramming does not complete and the “X” symbol displays as shown in
Figure 26:


Do not disconnect the plus VI
or shut down C-III plus if
reprogramming does not
complete.



Check battery voltage (12.0 –
15.5V).



CONSULT A/C adapter is
plugged in.



Ignition ON, engine OFF.



Transmission in Park.



All C-III plus / plus VI cables are
securely connected.



All C-III plus updates are
installed.



Select Home, and then restart
the reprogram procedure from
the beginning.

Figure 26

22/40

NTB15-037e

48. Confirm the Transmission Fluid temperature judgment is OK, then select Next.


If the judgment is NG, drive the vehicle to warm the transmission until the judgment
changes to OK.

Step
48

Figure 27

23/40

NTB15-037e

49. Follow the on-screen
instructions; maintain
the following conditions:
a. Parking brake set.
b. Ignition ON, with the
engine OFF.
c. Press the Brake.
d. Press accelerator
between ¼ and ½.
e. Put shift selector in
R.

Step
50

Figure 28

50. Select Erase DTC.

51. Follow the on-screen
instructions; maintain
the following conditions:
a. Parking brake set.
b. Ignition ON, with the
engine OFF.
Step
52

c. Fully depress the
accelerator.
d. Put shift selector in
R.
52. Select Start.
Figure 29

24/40

NTB15-037e

53. When COMPLETED is displayed, select Next.

Step
53

Figure 30

54. Operate the ignition per the on-screen instructions.