NHTSA ID Number: 10120718
Manufacturer Communication Number: Campaign Circula
TSB/Document Date: 2017-10-25
Summary
Certain vehicles were produced with 19-inch wheels that do not meet Audi
appearance requirements. In the event an owner wishes to replace a wheel, four new wheels would need to be purchased because a matching replacement for the existing factory wheel would not be available. This can result in considerable expense to the owner and lead to customer dissatisfaction. In order to ensure continued customer satisfaction, Audi has obtained a set of four brand new 19-inch wheels for each affected vehicle and will install them in place of the factory-installed wheels free of charge. The new wheels meet Audi appearance specifications, and are also available for replacement ordering by Audi dealers.
IMPORTANT INFORMATION
Please inform and provide a copy of this document to every person in your dealership with campaign-related responsibilities,
including Service, Parts and Accounting personnel. By law, dealers must correct, prior to delivery for sale or lease, any vehicle that
fails to comply with an applicable Federal Motor Vehicle Safety Standard or that contains a defect relating to motor vehicle safety.
If you have questions regarding this or any other campaign, please contact Warranty.
Customer Satisfaction Campaign
Code: 44L6
Subject:
2015 MY Audi A7 Equipped with 19-inch Wheels
Wheel Replacement
Problem Description
Certain vehicles were produced with 19-inch wheels that
do not meet Audi appearance requirements. In the event
an owner wishes to replace a wheel, four new wheels
would need to be purchased because a matching
replacement for the existing factory wheel would not be
available. This can result in considerable expense to the
owner and lead to customer dissatisfaction.
Corrective Action
In order to ensure continued customer satisfaction, Audi
has obtained a set of four brand new 19-inch wheels for
each affected vehicle and will install them in place of the
factory-installed wheels free of charge. The new wheels
meet Audi appearance specifications, and are also
available for replacement ordering by Audi dealers.
Affected Vehicles
U.S.A. and CANADA:
2015 MY Audi A7 with 19-inch wheels
Verify the open Campaigns/Actions screen in Elsa to determine if
the VIN# applies to this Campaign/Action
NOTE:
•
•
•
•
Elsa is the only valid campaign inquiry/verification source. Check
Elsa on the day the campaign work will be performed to verify
vehicle eligibility for the repair in order to receive claim payment
consideration. Campaign status must show “open”.
If this repair appears to have already been performed on the
vehicle but the code still shows open in Elsa, contact Warranty
before proceeding further, e.g. a dealer may have recently
performed this repair but not yet entered a claim for it in the
system.
Elsa may also show additional open action(s); if so, inform your
customer - this work can be done while the vehicle is in for this
campaign.
Contact Warranty if you have any questions.
February 3, 2015
Parts Information and Allocation
Due to the small number of affected vehicles, parts will
only be allocated for affected vehicles in dealer new-car
inventory. Dealers scheduling this repair with customers
should ensure that the replacement parts are ordered
and on-hand to coincide with the customer’s scheduled
service appointment.
If you have exceeded your weekly Upper Order Limit,
please submit your requests for additional parts via
email to upperorderlimits@vw.com.
If you have questions regarding parts, please contact the
Parts Helpline at 800-767-6552.
Owner Notification Mailing
On or about February 3, 2015, the customer mailing will
take place. A sample copy of the owner letter is
enclosed.
Customer Satisfaction Campaign Expiration Date
• This campaign will be available for customers free of
charge only until February 28, 2016. Vehicles
repaired under this action must have this service
completed on or before February 28, 2016 to be
eligible for payment.
• Inspections/repairs performed after February 28,
2016 will not be eligible for payment. Dealers
should keep this expiration date in mind when
scheduling customers for this action.
• If a customer wishes to have this service performed
after the expiration date, your dealerships normal
parts and labor cost associated with this repair will
apply.
Inventory Vehicle Open Campaign/Action Report
(AIM)
On or about February 3, 2015, affected vehicles will be
listed on the Inventory Vehicle Open Campaign Action
report under My Dealership Reports (found on
www.accessaudi.com & AIM). A list will not be posted for
dealers who do not have any affected vehicles.
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Audi dealer. 2015 Audi of America, Inc. and Audi Canada. All Rights Reserved.
February 2015
44L6/A1 Page 1 of 6
Claim Entry Procedure
Immediately upon completion of the repair work, enter the Applicable Criteria ID and Repair Operation from
the following chart. The Applicable Criteria ID is shown in Elsa. Claims will only be paid for vehicles that
show this campaign open in Elsa on the day of the repair. To help ensure prompt and proper payment, attach
the screen print to the repair order.
Saga Claim Entry Procedure
Check Elsa to determine if this campaign is open.
Service No.:
Damage Code:
44L6
0099
Parts Manufacturer
Removed part: Use vendor code 002
Sold vehicle = 7 10
Unsold vehicle = 7 90
Accounting Instructions
Criteria I.D. 4G
Replace all 4 wheels on vehicle.
Repair operation:
Quantity
4.0
Outside Material
Amount
$5.00
4412 56 99
140 T.U.
Part Number
Part Description
4H0 601 025 BS
Alloy wheel*
Part Number
Part Description
Wheel Weights
Wheel Weights
*Causal Indicator: Select “alloy wheel” as causal part
There is NO reimbursement for Vehicle Wash or Loaner
If customer refused repairs
U.S. dealers: Submit the request through Audi Warranty Online under the Campaigns/Update option.
Canadian dealers: Fax the Repair Order to Warranty at (905) 428-4811 and provide VIN, applicable
Service Number, Customer Information, Dealer Number and Date.
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Audi dealer. 2015 Audi of America, Inc. and Audi Canada. All Rights Reserved.
February 2015
44L6/A1 Page 2 of 6
Customer Letter Example (USA)
Subject:
Customer Satisfaction Campaign 44L6 – Wheel Replacement
Certain 2015 Model Year Audi A7 Equipped with 19-inch Wheels
Dear Audi Owner,
As part of Audi's ongoing commitment to customer satisfaction, we are informing you of our decision to conduct a
customer satisfaction campaign on certain 2015 model year Audi A7 vehicles equipped with 19-inch wheels. Our records
show that you are the owner of a vehicle affected by this action.
What is the issue?
Certain vehicles were produced with 19-inch wheels that do not meet Audi appearance
requirements. In the event an owner wishes to replace a wheel, four new wheels would need
to be purchased because a matching replacement for the existing factory wheel would not be
available. This can result in considerable expense to the owner and lead to customer
dissatisfaction.
What will we do?
In order to ensure your continued satisfaction, Audi has obtained a set of four brand new 19inch wheels for your vehicle and will install them in place of the factory-installed wheels free
of charge. The new wheels meet Audi appearance specifications, and are also available for
replacement ordering by your Audi dealer.
What should you do?
In order to limit any possible inconvenience, please contact your authorized Audi dealer as
soon as possible to schedule this service. This work will take approximately two hours to
complete, and, as stated above, will be performed at no cost to you. Please keep in mind that
your dealer may need additional time for the preparation of the repair, as well as to
accommodate their daily workshop schedule.
This customer satisfaction campaign will be available for you free of charge only until
February 28, 2016. If you wish to have this service performed after that date, your dealer’s
normal parts and labor cost associated with this repair will apply.
Lease vehicles and
address changes
If you are the lessor and registered owner of the vehicle identified in this action, please
forward this letter immediately via first-class mail to the lessee within ten (10) days of receipt.
If you have changed your address or sold the vehicle, please fill out the enclosed prepaid
Owner Reply card and mail it to us so we can update our records.
Reimbursement of
Expenses
If you have previously paid for repairs relating to the condition described in this letter, the
enclosed form explains how to request reimbursement. We would be pleased to review your
reimbursement request.
Can we assist you
further?
If your authorized Audi dealer fails or is unable to complete this work free of charge within a
reasonable time, please call or write to:
Audi of America, Inc.,
Attn: Customer Experience (44L6)
3800 Hamlin Road, Auburn Hills, MI 48326
1-800-253-2834
www.audiusa.com
Checking your vehicle
for open Recalls and
Service Campaigns
To check your vehicle’s eligibility for repair under this or any other recall/service campaign,
please visit the Recall/Service Campaign Lookup tool at www.audiusa.com and enter your
Vehicle Identification Number (VIN). As always, if you have any questions or if you need
additional assistance, please contact Customer Experience or your authorized Audi dealer.
We apologize for any inconvenience this matter may cause; however we are taking this action to help ensure your vehicle
continues to meet and exceed your expectations. Thank you for your continued loyalty!
Sincerely,
Audi Customer Protection
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Audi dealer. 2015 Audi of America, Inc. and Audi Canada. All Rights Reserved.
February 2015
44L6/A1 Page 3 of 6
Customer Letter Example (CANADA)
Subject:
Customer Satisfaction Campaign 44L6 – Wheel Replacement
Certain 2015 Model Year Audi A7 Equipped with 19-inch Wheels
Dear Audi Owner,
As part of Audi's ongoing commitment to customer satisfaction, we are informing you of our decision to conduct a
customer satisfaction campaign on certain 2015 model year Audi A7 vehicles equipped with 19-inch wheels. Our records
show that you are the owner of a vehicle affected by this action.
What is the issue?
Certain vehicles were produced with 19-inch wheels that do not meet Audi appearance
requirements. In the event an owner wishes to replace a wheel, four new wheels would need
to be purchased because a matching replacement for the existing factory wheel would not be
available. This can result in considerable expense to the owner and lead to customer
dissatisfaction.
What will we do?
In order to ensure your continued satisfaction, Audi has obtained a set of four brand new 19inch wheels for your vehicle and will install them in place of the factory-installed wheels free
of charge. The new wheels meet Audi appearance specifications, and are also available for
replacement ordering by your Audi dealer.
What should you do?
In order to limit any possible inconvenience, please contact your authorized Audi dealer as
soon as possible to schedule this service. This work will take approximately two hours to
complete, and, as stated above, will be performed at no cost to you. Please keep in mind that
your dealer may need additional time for the preparation of the repair, as well as to
accommodate their daily workshop schedule.
This customer satisfaction campaign will be available for you free of charge only until
February 28, 2016. If you wish to have this service performed after that date, your dealer’s
normal parts and labor cost associated with this repair will apply.
Lease vehicles and
address changes
If you are the lessor and registered owner of the vehicle identified in this action, please
forward this letter immediately via first-class mail to the lessee within ten (10) days of
receipt. If you have changed your address or sold the vehicle, please fill out the enclosed
prepaid Owner Reply card and mail it to us so we can update our records.
Reimbursement of
Expenses
If you have previously paid for repairs relating to the condition described in this letter, the
enclosed form explains how to request reimbursement. We would be pleased to review
your reimbursement request.
Can we assist you
further?
If your authorized Audi dealer fails or is unable to complete this work free of charge within
a reasonable time, please call or write to:
Audi Canada
Attn: Customer Relations (44L6)
PO Box 842, Stn. A
Windsor, ON N9A 6P2
1-800-822-2834
www.audi.ca
We apologize for any inconvenience this matter may cause; however we are taking this action to help ensure your
vehicle continues to meet and exceed your expectations. Thank you for your continued loyalty!
Sincerely,
Audi Customer Protection
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Audi dealer. 2015 Audi of America, Inc. and Audi Canada. All Rights Reserved.
February 2015
44L6/A1 Page 4 of 6
Campaign Work Procedure
44L6 Customer Satisfaction Campaign
Required Tools:
•
Torque Wrench 1332 40 – 200 Nm or
equivalent
Required Parts:
Quantity
4
Part Number
Part Description
4H0 601 025 BS
Alloy wheel
Work Procedure
Section A – Check for Previous Repair
•
Enter the VIN in Elsa and proceed to the
“Campaign/Action” screen
Tip: On the date of repair, print this
screen and keep a copy with the
repair order
⇐ Ensure that the Status is “Open”
⇐ Note the Applicable Criteria ID
for use in determining the
correct work to be done and
corresponding parts associated
Proceed to Section B
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Audi dealer. 2015 Audi of America, Inc. and Audi Canada. All Rights Reserved.
February 2015
44L6/A1 Page 5 of 6
Section B – Remove Wheels and Install New
Wheels
•
Remove all 4 wheels from vehicle.
•
Remove tires from current wheels and
install on new wheels, 4H0 601 025 BS.
•
Balance new tire and wheel assembly.
•
Reinstall tire and wheel assembly on to
the vehicle and torque to 120 Nm.
•
Drill hole in old rims so they are not able to
hold pressure.
Proceed to section C
Section C – Campaign Stamp
⇐ Once the campaign has been completed,
the technician should stamp the repair
order.
•
Stamps are available for ordering through
the Compliance Label Ordering Portal
(item# AUD4927ENG).
Item#: AUD4927ENG
OR
Item # AUD4927FRE
Proceed to Section D
Section D - Parts Return/Disposal
Properly destroy or dispose of removed parts in
accordance with all state and local requirements,
unless otherwise indicated and/or requested
through the Warranty Parts Shipping Portal
(WPSP) for U.S. and SAGA for Canada.
ALL WORK IS COMPLETE
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Audi dealer. 2015 Audi of America, Inc. and Audi Canada. All Rights Reserved.
February 2015
44L6/A1 Page 6 of 6
Frequently Asked Questions (FAQ)
Customer Satisfaction Campaign 44L6
SUMMARY
Campaign Code: 44L6
Affected Vehicles: Certain 2015 MY Audi A7 equipped with 19-inch wheels
Problem Description: Certain vehicles were produced with 19-inch wheels that do not meet Audi appearance
requirements. In the event an owner wishes to replace a wheel, four new wheels would need to be purchased
because a matching replacement for the existing factory wheel would not be available. This can result in
considerable expense to the owner and lead to customer dissatisfaction.
Corrective Action: In order to ensure continued customer satisfaction, Audi has obtained a set of four brand
new 19-inch wheels for each affected vehicle and will install them in place of the factory-installed wheels free of
charge. The new wheels meet Audi appearance specifications, and are also available for replacement ordering
by Audi dealers.
What is the parts allocation plan for this action?
•
A small parts allocation will take place prior to customer notification.
•
If additional parts are required for critical cases, please contact the Parts Specialists at 800-767-6552.
Is a loaner vehicle being covered under this action?
No. A loaner vehicle is not being covered under this action.
Is towing being covered under this action?
No. Towing is not covered under this action.
What should dealers do if they have any affected vehicles in inventory?
Dealers can use their most current AIM report to identify any affected vehicles that may be in their inventory. In
the interest of customer satisfaction, affected vehicles should be kept in a secure area where they cannot be
made available for sale, lease, trade or demo use until this repair has been performed.
What is the expiration date for this customer satisfaction campaign?
This campaign will be available for customers free of charge only until February 28, 2016. Vehicles repaired
under this action must have this service completed on or before February 28, 2016 to be eligible for payment.
Work performed after February 28, 2016 will not be eligible for payment.
expiration date in mind when scheduling customers for this action.
Dealers should keep this
If a customer wishes to have this service performed after the expiration date, your dealerships normal parts and
labor cost associated with this repair will apply.
Who should dealers contact if they have additional questions?
Dealers with additional questions about this or any other campaign should contact Warranty. Press inquiries
should be directed to Audi Public Relations.
IMPORTANT!
This FAQ is intended to provide supplementary information regarding this action. For additional information, please refer to the campaign circular posted on ElsaWeb and ServiceNet. To
ensure that ALL of your personnel are aware of this action before receiving questions from any customer, please share this information with ALL personnel who have campaign-related
responsibilities, including service writers, technicians, parts employees, warranty administrators, etc.
Page 1 of 1
44L6/A1
- 【Looking for More Professional Vehicle Scan...
- 【OE-Level 4 Systems OBD2 Scanner】iCarsoft E...
- 【4 Systems Diagnosis for 10000+ Vehicles】 iCarsoft E...
- 【6 Reset Services】iCarsoft E660 2026 Upgrade Version is...
- 【118+ Real Time Record & Live Graph View】iCarsoft E...
Last update on 2026-06-21 / Affiliate links / Images from Amazon Product Advertising API
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: Campaign Circula
Replacement Service Bulletin Number:
MFR Communication Date: 2015-02-03
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: WHEELS
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- 【OE-Level Full System Diagnostics-Lifetime F*REE Software Updates】The VDIAGTOOL D200 OBD2 Scanner for cars is a all system bidirectional scan tool that enjoy lifetime f*ree software updates, delivers complete system coverage. reading/clearing codes across engine, transmission, ABS, SAS, EPB, TPMS plus full access to body, chassis, powertrain and all control modules. This D200 Bidirectional car scanner works with most 1996+ OBD2 gasoline and hybrid
cars and light trucks. It does NOT support pure electric and heavy-duty trucks. PLEASE CHECK COMPATIBILITY BEFORE ORDERING or Contact us with VIN to confirm compatibility. - 【Supports OBD2 Full Functions-ZERO Subscription Fees】D200 Bidirectional OBD2 Scanner is a upgarde of universal car code reader. It supports OBD2 full functions to help you turn off the annoying instrument fault indicator, such as read/clear codes, O2 sensor test, I/M readiness, on-board monitor test, datastream, freeze frame, E-VAP system test, and retrieve vehicle information. This professional obd2 scanner diagnostic tool can full access to diagnostics, reset tools and maintenance features with a single payment. NOTE: The fault code can only be cleared after the vehicle's malfunction has been repaired; please ensure the vehicle issue is fixed before clearing the code.
- 【D200 Hidden 2 Advantages: 1. $169 Expandable 49+ Advanced Resets. 2. $199 Get J2534 P*a*s*s-Thru Programming】Your core car diagnostics and 26 reset remain lifetime f*ree for everyday maintenance. When you need deeper repair capability, upgrade with 3-year access for $169 in Store on VDIAGTOOL App, gaining 49+ advanced resets. D200 configured with J2534 hardware, upgrade only when you need without replacing the entire device. You also can Lifetime Unlock for $199 in Store one-time, perform module programming, software re~flashing and ECU data updates directly. Supports 17+ major brands, including for BMW, for Audi, for GM, for Ford and more. Note:D200 does‘t provide any OE software.
- 【Full Bidirectional Control / Active Tests】The D200 car scanner diagnostic tool is a true bidirectional scan tool that lets you send commands directly to the vehicle’s ECU for active tests. Quickly test fuel pumps, relays, solenoids, injectors, cooling fans, windows, sunroofs and more to verify operation instantly. Get dealership-level diagnostic control at a fraction of the cost (ofter $100-200$ per diagnostic visit), reduce guessworkand confirm repairs faster, avoid unnecessary parts replacement, towing fees and wait times.
- 【26 F*ree Essential Reset & Relearn Functions – Everyday Maintenance Made Easy】Handle common maintenance and repair jobs without visiting the shop. The D200 code readers & scan tools includes 26 f*ree high-demand reset functions, including Oil Reset, EPB Service, SAS Calibration, ABS Brake Bleeding, Throttle Relearn, Injector Coding, Headlight Adjustment, Tire Size Reset and more. Perfect for home car owners, mechanics and DIYers – just plug and diagnose anytime, anywhere! Note: Service functions vary by vehicle model—please confirm compatibility.
- 【A MUST-HAVE TOOL FOR DIYERS】 - VDIAGTOOL VD10 car code reader is an incredibly useful obd scanner for each car owner or hobbyist, even for those with little to no experience when it comes to vehicle mechanics! Similar to a fixd car diagnostic tool, using this car diagnostic scanner is extremely easy. All you have to do is attach it to your car OBDII port and you can diagnose car problems in seconds! Read Codes (DTCs); Clear Codes; Live Data; View Freeze Frame; I/M Readiness; Vehicle Information.
- 【KEEP ENGINE IN GOOD STATUS】 - VDIAGTOOL check engine code reader brings a fast access to scan, read the car fault code, show its definition on the screen instantly, troubleshooting to find the root causes of problems, erase the engine fault code and turn off the MIL (Malfunction Indicator Light). Similar to a fixd car diagnostic tool, this car code reader helps ensure your engine stays in top condition.
- 【READ/CLEAR CODES & DTC LOOKUP】- No search online & saving your time, this vehicle car code reader retrieves generic (P0, P2, P3, and U0), manufacturer specific (P1, P3, and U1) codes, pending codes and displays DTC definitions based on the built-in database(more than 3000 codes) on the TFT screen, find out the root causes and clear the codes after fixed.
- 【LIVE DATA & RETRIEVE FREEZE FRAME】 - This diagnostic scan tool for accurate diagnosis enables you to retrieve data from vehicle sensors, such as Engine RPM, Intake air temperature, Short/Long term fuel, Misfire data and etc. The freeze frame is stored in the PCM together with the diagnostic trouble code (DTC) related to the fault. Comparable to a fixd car diagnostic tool, the VD10 car code reader car scanner can be a valuable & practical diagnostic aid and also greatly help when diagnosing intermittent problems.
- 【I/M READINESS for THE S-nn-0-g CHECK】- OBDII vehicle may not pass the annual inspection unless the required monitors since reset are complete. So you should at least read the readiness monitors and make sure they are ready. This car obd2 scanner diagnostic tool is equipped with I/M readiness function to check the operations of the e-m-issi0n system on OBD2 compliant vehicles, run I/M monitor readiness test, checking if the pass vehicle s-m-0-g inspection.
- 【Professional Diagnostics】 The VD80 BT Lite bidirectional obd2 scanner is a professional OBD2 scanner diagnostic tool, delivering vehicle diagnostics right in your own garage. It supports 4,000+ active diagnostic tests, 28+ maintenance service functions, ECU coding, PMI calibration, brake service reset, and OEM-grade full-system vehicle scanning—perfect for DIYers and pros looking for powerful automotive tools. The available function tests vary by model—please to confirm compatibility.
- 【ADVANCED ECU CODE, CUSTOMIZE OE-SETTINGS】As a complete car code reader and reset tool, the VD80 BT Lite bidirectional obd2 scanner supports ECU coding for VW, for Audi, for BMW, for Benz, for Mitsubishi and more. PMI function for Ford/for Lincoln/for Mazda, supports copy data into new module. Step-by-step Guided Diagnostics makes complex jobs easier—making this one of the most reliable code readers & scan tools on the market.
- 【100000+ Vehicles Compatibility – CAN FD/DOIP】 VD80 BT Lite Auto Scanner Compatible with 100,000+ vehicles worldwide, this bidirectiona car scanner works with all OBD2-compliant vehicles manufactured after 1996, covering more than 100 brands worldwide. It also supports CAN FD, DOIP and FCA Secure Gateway protocols, boost 2X faster data transfer, covers 99% of U.S., EU and Asian cars. With 22 languages and 2 years of f*ree updates—future-proofing your car reader diagnostic for all cars.
- 【28+ Maintenance Services & Calibration Functions】VD80 BT Lite scanner for car Supports 28 maintenance services, including resetting oil and service lights after routine maintenance, registering new batteries for proper system operation, and clear clogged filters and restore performance. Additionally, it calibrates TPMS sensors after tire rotations, resets brake systems after pad replacements, relearns steering angle sensors after alignments, and more. These functions help your vehicle quickly and accurately return to peak performance—without the costly dealer visits.
- 【True Bidirectional Control – Diagnose with Confidence】Standing out with full-system coverage and extensive active test capabilities, the VD80 BT Lite bidirectional scan tool retrieves data from electronic control units and performs a wide range of active tests. You can real-time control over modules like fuel pumps, windows, A/C clutches, and relays. Perform 100+ advanced functions including throttle adaptation, injector coding, VIN write, idle relearn, and ABS bleed—helping you fix it right the first time with this all-in-one car diagnostic scanner.
Last update on 2026-06-21 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.