C type
REGISTRATION MANUAL FOR IMMOBILIZER

13) Smart ECM registration is then automatically
executed. When the registration ends normally,
the following screen appears. Click the [OK]
button.

12) The dialog box to confirm already registered
access keys appears. Hold one of those access
keys over the push engine switch (push-button
ignition switch). After the buzzer sounds once,
move the access key away from the push
engine switch (push-button ignition switch) and
go to the next step.

IM-00451

14) After confirming that the keyless access with
push button start system operates normally,
quit the registration operation.

IM-00450

Note:
• When holding the access key up to the push
engine switch (push-button ignition switch), bring
the access key close to the push engine switch
(push-button ignition switch) as shown below.

SL-00717

(1) Let the mechanical key insertion opening of
the access key face down.
(2) Hold the Subaru ornament side to the push
engine switch (push-button ignition switch)
side.
(3) Bring it close until it touches the push
engine switch (push-button ignition switch).
• The procedure to hold an access key over the
push engine switch (push-button ignition switch)
has to be done within 30 seconds after the
screen above appears.

48

Vehicle-id:
SIE-id::
Å`

S1001BE.fm

49 ページ

２０１４年４月３０日

水曜日

午後２時９分

C type
REGISTRATION MANUAL FOR IMMOBILIZER

6-4 Registering the Engine ECM

5) On the next screen, confirm the system is
keyless access with push button start system.
Click the [YES] button.

1) Start the PC application according to section
"Starting Up the System" and display the Main
Menu screen. (Refer to "PC application help for
Subaru Select Monitor".)
2) On the Main Menu, select [All other models].

IM-00437

Note:
The term [smart system] that appears on this screen
is synonymous with the term [keyless access with
push button start system] used in this text.
6) Input the teaching operation code, and then
click the [OK] button.

IM-00491

3) Select [Immobilizer] from the item selection
dialog box.

Note:
If the menu screen is displayed instead of the
command input screen, the vehicle is D type. See
the procedures for D type vehicle.

IM-00492

4) Click the [YES] button if the System Check
screen is displayed.
IM-00408

Note:
When you wish to return to the Main Menu screen,
click the [QUIT] button.
7) The registration mode selection dialog box
appears. Click the [Engine ECM Registration]
button.
IM-00404

Note:
Audio System is the specification only for the U.K.

IM-00452

49

Vehicle-id:
SIE-id::
Å`

S1001BE.fm

50 ページ

２０１４年４月３０日

水曜日

午後２時９分

C type
REGISTRATION MANUAL FOR IMMOBILIZER

12) The screen shown below will appear if
registration ends normally. Click the [OK]
button.

8) On the registration mode confirmation dialog
box that appears, click the [OK] button.

IM-00453
IM-00446

9) Input the security ID and then click the [OK]
button.

13) After the screen shown below appears, wait
until the Main Menu screen shows up again.

IM-00410
IM-00454

10) Stand by as the security ID is being collated.

14) After confirming that the keyless access with
push button start system operates normally,
quit the registration operation.

IM-00411

11) Wait until the engine ECM is then being
registered.

IM-00445

50

Vehicle-id:
SIE-id::
Å`

S1001BE.fm

51 ページ

２０１４年４月３０日

水曜日

午後２時９分

C type
REGISTRATION MANUAL FOR IMMOBILIZER

6-5 Readout the Number of Access
Key Registration

5) On the next screen, confirm the system is
keyless access with push button start system.
Click the [YES] button.

1) Start the PC application according to section
"Starting Up the System" and display the Main
Menu screen. (Refer to "PC application help for
Subaru Select Monitor".)
2) On the Main Menu, select [All other models].

IM-00437

Note:
The term [smart system] that appears on this
screen is synonymous with the term [keyless
access with push button start system] used in this
text.
6) Input the teaching operation code, and then
click the [OK] button.

IM-00491

3) Select [Immobilizer] from the item selection
dialog box.

Note:
If the menu screen is displayed instead of the
command input screen, the vehicle is D type. See
the procedures for D type vehicle.

IM-00492

4) Click the [YES] button if the System Check
screen is displayed.

IM-00408

Note:
When you wish to return to the Main Menu screen,
click the [QUIT] button.

IM-00404

Note:
Audio System is the specification only for the U.K.

51

Vehicle-id:
SIE-id::
Å`

S1001BE.fm

52 ページ

２０１４年４月３０日

水曜日

午後２時９分

C type
REGISTRATION MANUAL FOR IMMOBILIZER

6-6 Delete the Access Key ID

7) The registration mode selection dialog box
appears. Click the [Readout the number of
mobile key registration] button.

1) Start the PC application according to section
"Starting Up the System" and display the Main
Menu screen. (Refer to "PC application help for
Subaru Select Monitor".)
2) On the Main Menu, select [All other models].

IM-00455

8) The confirmation dialog box to carry out the
registered access key number reading mode is
shown. Click the [OK] button.

IM-00491

3) Select [Immobilizer] from the item selection
dialog box.

IM-00456

9) The number of access keys currently registered
will be displayed. After clicking the [OK] button,
the screen will return to the main menu.

IM-00492

4) Click the [YES] button if the System Check
screen is displayed.

IM-00457
IM-00404

Note:
Audio System is the specification only for the U.K.

52

Vehicle-id:
SIE-id::
Å`

S1001BE.fm

53 ページ

２０１４年４月３０日

水曜日

午後２時９分

C type
REGISTRATION MANUAL FOR IMMOBILIZER

5) On the next screen, confirm the system is
keyless access with push button start system.
Click the [YES] button.

8) The confirmation dialog box to carry out the
access key ID deletion mode appears. Click the
[OK] button.

IM-00437

IM-00459

Note:
The term [smart system] that appears on this
screen is synonymous with the term [keyless
access with push button start system] used in this
text.
6) Input the teaching operation code, and then
click the [OK] button.

9) Input the security ID and then click the [OK]
button.

Note:
If the menu screen is displayed instead of the
command input screen, the vehicle is D type. See
the procedures for D type vehicle.
IM-00410

10) Stand by as the security ID is being collated.

IM-00408

Note:
When you wish to return to the Main Menu screen,
click the [QUIT] button.
7) The registration mode selection dialog box
appears. Click the [Delete the mobile key ID]
button.

IM-00411

11) Please wait for deleting registered access key
ID.

IM-00460
IM-00458

53

Vehicle-id:
SIE-id::
Å`

S1001BE.fm

54 ページ

２０１４年４月３０日

水曜日

午後２時９分

C type
REGISTRATION MANUAL FOR IMMOBILIZER

13) The screen shown below will appear if access
key ID deletion ends normally. Click the [OK]
button.

12) As the number of access keys confirmation
screen will be displayed, place one of the
access keys, the key, which you do not want to
delete the ID, over the push engine switch
(push-button ignition switch). After the buzzer
sounds once, move the access key away from
the push engine switch (push-button ignition
switch) and go to the next step.

IM-00462

14) Complete this procedure after confirming if the
keyless access with push button start system
works properly by using an access key, which
has the ID not deleted.
IM-00461

Note:
• The ID of an access key placed over the push
engine switch (push-button ignition switch) will
not be deleted.
• When holding the access key up to the push
engine switch (push-button ignition switch), bring
the access key close to the push engine switch
(push-button ignition switch) as shown below.

SL-00717

(1) Let the mechanical key insertion opening of
the access key face down.
(2) Hold the Subaru ornament side to the push
engine switch (push-button ignition switch)
side.
(3) Bring it close until it touches the push
engine switch (push-button ignition switch).
• The procedure to hold an access key over the
push engine switch (push-button ignition switch)
has to be done within 30 seconds after the
screen above appears.

54

Vehicle-id:
SIE-id::
Å`

S1001BE.fm

55 ページ

２０１４年４月３０日

水曜日

午後２時９分

C type
REGISTRATION MANUAL FOR IMMOBILIZER

6-7 Registering Remote Control
Engine Starter

5) On the next screen, confirm the system is
keyless access with push button start system.
Click the [YES] button.

1) Start the PC application according to section
"Starting Up the System" and display the Main
Menu screen. (Refer to "PC application help for
Subaru Select Monitor".)
2) On the Main Menu, select [All other models].

IM-00437

Note:
The term [smart system] that appears on this
screen is synonymous with the term [keyless
access with push button start system] used in this
text.
6) Input the teaching operation code, and then
click the [OK] button.

IM-00491

3) Select [Immobilizer] from the item selection
dialog box.

Note:
If the menu screen is displayed instead of the
command input screen, the vehicle is D type. See
the procedures for D type vehicle.

IM-00492

4) Click the [YES] button if the System Check
screen is displayed.

IM-00408

Note:
When you wish to return to the Main Menu screen,
click the [QUIT] button.

IM-00404

Note:
Audio System is the specification only for the U.K.

55

Vehicle-id:
SIE-id::
Å`

S1001BE.fm

56 ページ

２０１４年４月３０日

水曜日

午後２時９分

C type
REGISTRATION MANUAL FOR IMMOBILIZER

11) Wait until the remote control engine starter is
then being registered.

7) The registration mode selection dialog box
appears. Click the [Remote Control Engine
Starter Registration] button.

IM-00465
IM-00463

12) The screen shown below will appear if remote
control engine starter registration ends
normally. Click the [OK] button.

8) On the registration mode confirmation dialog
box that appears, click the [OK] button.

IM-00466

IM-00464

13) After confirming that the keyless access with
push button start system and remote control
engine starter operate normally, quit the
registration operation.

9) Input the security ID and then click the [OK]
button.

IM-00410

10) Stand by as the security ID is being collated.

IM-00411

56

Vehicle-id:
SIE-id::
Å`

S1001BE.fm

57 ページ

２０１４年４月３０日

水曜日

午後２時９分

C type
REGISTRATION MANUAL FOR IMMOBILIZER

6-8 Registering Body Integrated Unit
or Combination Meter
Refer to the parts replacement table in "6-9 Keyless
access with push button start system (except for
North America): Correspondence table at the time
of parts failure" and perform the measure that
corresponds to each failure/lost state.
Note:
When replacing both the body integrated unit and
combination meter at the same time or just one of
them, refer to the procedure described in "6-1
Adding Access Keys" when executing smart
immobilizer registration.

57