Oil Pressure Tester

Best Selling Oil Pressure Tester


Bestseller No. 1
Abn Engine Oil Pressure and Transmission Fluid Diagnostic Tester Tool Kit – 500 PSI / 35 Bar Gauge, Hose, and Adapters
  • EASILY DIAGNOSE YOUR VEHICLE: The ABN Engine Oil Pressure and Transmission Fluid Diagnostic Tester Tool Kit – 500 PSI / 35 Bar Gauge, Hose, and Adapters makes diagnosing a possible major engine, oil pressure, or transmission fluid pressure problem easy on most vehicles including both American domestic and imported cars and small pickup trucks
  • EASY TO USE: Threads into the same hole where you have your oil sending unit placed; Simply remove the oil sending unit or oil pressure switch and thread this in the hole, then start the engine and read your oil pressure; Dual gauge is easy to read up to 500 PSI and 35 Bar
  • BUILT TO LAST: Fittings, extension tube, and adapters constructed from solid brass; 60-inch (152.4cm) extra-long hose constructed from durable rubber and rated for 500 PSI (35 Bar); Gauge includes a black protective coating for added strength and longevity
  • EASY STORAGE: Heavy-duty 13” x 10” x 2.3” inch (33cm x 25.4cm x 5.8cm) plastic blow-molded carrying case for easy transportation, safe storage, and quick organization
  • CONTENTS: Package includes (6) brass fittings, (4) adapters, (1) brass extension tube, (1) pressure gauge, (1) rubber hose, and (1) carrying case for your convenience
Bestseller No. 2
OTC Tools 5610 Trans-Eng Oil Press Tester
  • Large 3-1/2 inch gauges feature a chrome bezel and rugged protective outer boot
  • High pressure gauge reads 0-400 psi and 0-2800 kPa
  • Low pressure gauge reads 0-100 psi and 0-700 kPa
  • Both gauges include rear hook to allow gauge to be hung conveniently out of the way
  • Gauges and hose assembly incorporate quick couplers for easy disconnect
SaleBestseller No. 4
Bestseller No. 5
Partol High Pressure Oil Rail Ball Tube Repair Kit For Ford 6.0L Powerstroke 2004 2005 2006 2007 2008 2009 2010, With Tool&O-Rings
  • Complete Set Of Ball Tubes And High Temperature Seals and Tool Fit for Ford F-250/F-350 6.0L 2004-2010.
  • High quality aluminum alloy material for enhancing its strength and durability. Each Component Is 100% Brand New And Treated For High Heat And High Pressure. Anti-corrosion, high temperature resistance, durable in use.
  • Over The Time The Seals Commonly Leak Causing Hart Start ,Or Not Start Conditions. Replacing The Ball Valves And Seals Saves Money And Time By Eliminating The Need To Replace The Entire The Oil Rail
  • This Repair Kit Allows Technicians And Vehicle Owners To Repair Expensive High-Pressure Oil Issues In Minutes.
  • This Product are Tested and Meet Or Exceed OEM Performance Requirements.
Bestseller No. 6
yjracing High Pressure Oil Pump HPOP Quick Disconnect Tool Fit for 6.0L 7.3L Powerstroke
  • This is the quick release tool is a must have for removing the 7.3 high pressure oil pump and the early 6.0 high pressure oil pump
  • Angle cut prongs for easy use, will speed up the time it takes to remove injectors
  • Also good for disconnecting the turbo oil feed line & the under-valve cover oil rails that feed the injectors
  • Diesel Care reviews the quality of all its product to insure the highest quality standards
  • Fitment: F250 F350 F450 F550 E250 E350 E450 T444E FSD ESD 6.0L 7.3L
Bestseller No. 7
BETOOLL 9pcs Wire Long Reach Hose Clamp Pliers Set Fuel Oil Water Hose Auto Tools
  • Pliers can be locked, feeing up your hands and making your job easier and faster.
  • Long reach hose clamp plier with wire flexible wire shaft.
  • Convenient for working hidden areas and long distance
  • For replacement of fuel, oil, and water hose.
  • For the removal and locking of clamps into open position.
Bestseller No. 8
Bentolin High Pressure Oil Pump HPOP Quick Disconnect Tool for Ford 6.0L 7.3L Powerstroke
  • Fitment: F250 F350 F450 F550 E250 E350 E450 T444E FSD ESD 6.0L 7.3L
  • Designed to disconnect high-pressure oil rail supply line from the fuel rail when removing the fuel injectors
  • Fuel Line Disconnect Tool Will Speed up the time it takes to remove injectors;
  • Metal construction for durability , STC Disconnect, Easy To Use
Bestseller No. 9
Lisle 13250 Oil Pressure Switch Socket
  • Works on both gauge and combination light-gauge oil pressure switches
Bestseller No. 10
OTC Tools 7219 Oil Pressure Adapter
  • Allows for engine oil pressure to be measured
  • Installs in place of oil filter providing ports to attach oil pressure tester
  • Dual port for bottom or side tester connection
  • Installs with 11/16" (17mm) hex drive socket
  • Fits GM 4.8L, 5.3L, 5.7L, 6.0L engines, 1996-2006, similar to J-42907

 

Last update on 2019-12-03 / Affiliate links / Images from Amazon Product Advertising API