Pressure Relief Devices May Not Vent – EMER Pressure Relief Device – Agility

“This site contains affiliate links for which OEMDTC may be compensated”

April 8, 2020 NHTSA CAMPAIGN NUMBER: 20E019000

Pressure Relief Devices May Not Vent

If the fuel system ruptures from being exposed to heat, there would be an increased the risk of injury.

 

NHTSA Campaign Number: 20E019

Manufacturer Agility Fuel Solutions

Components FUEL SYSTEM, OTHER

Potential Number of Units Affected 2,015

 

Summary

Agility Fuel Systems (Agility) is recalling certain CNG Pressure Relief Devices, CNG Valves and CNG Fuel Systems that include an EMER pressure relief device. The thermally activated pressure relief devices (PRDs) installed on CNG fuel systems may not vent the system when exposed to heat, potentially resulting in the system rupturing.

 

Remedy

Agility will work with OEM’s and distributors to notify customers, and replace the PRDs, free of charge. The recall began on April 28, 2020. Owners may contact Agility customer service at 1-949-267-7745.

 

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

 


* * * IMPORTANT SAFETY RECALL * * *

NHTSA Recall 20E019

This notice applies to your vehicle(s):  See attached vehicle list.

Your Vehicle Identification Number(s) (VIN):  See attached VIN list.

This notice is being sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act (NHTSA).  Agility Fuel Solutions LLC (Agility) has determined that a defect which relates to motor vehicle safety exists in Agility-supplied compressed natural gas (CNG) fuel systems equipped with certain EMER S.p.A. (EMER) pressure relief devices (PRDs) (EMER Part Numbers PRD2302T-004, PRD2322T-001, PRD2322T-004, PRD2102T, PRD212 and PRD 210OR) and EMER valves that contain EMER PRDs (EMER Part Numbers MARK147007 and MARK147-008).  The CNG fuel system installed on your vehicle(s) (identified in the attachment) may be affected.  Agility is conducting a safety recall to address this condition. This recall also includes any of the above-listed PRDs and valves that you may have purchased as service and/or replacement parts.

 

What is the issue?

The EMER-supplied thermally activated PRDs and valves identified above and installed on the subject CNG fuel systems may not vent the fuel system as intended when exposed to heat.  If a PRD, including a PRD within a valve, does not release, or is slow to release, during a fire on a fuel system, one or more system components may rupture, potentially causing equipment damage and/or personal injury.

 

What will Agility do?

Agility and its authorized representatives will inspect your vehicle to determine whether it is equipped with one of the defective PRDs and/or valves.  If so, we will replace the PRDs and/or valves free of charge (parts and labor) with PRDs and/or valves that meet applicable specifications. Replacement parts are currently available. Installation of the replacement PRDs and/or valves is expected to take approximately one hour.  However, because the CNG fuel system needs to be defueled in order to install the replacement PRDs and/or valves, each vehicle may need to be available for a longer period of time.  We will do our best to minimize the time that the vehicle needs to be available.

If you purchased the PRDs and/or valves listed above as service or replacement parts, please contact Agility to arrange for return of any new (uninstalled) parts remaining in your inventory for credit. For parts that have been installed on vehicles, Agility will inspect and repair the vehicles in the same manner as above.

 

What should you do?

Please call Agility at your earliest opportunity at (949) 267-7745 to schedule a service appointment.  Please mention Recall No. 20E019 and the VIN of the vehicle as shown in the attached.  If you no longer own this vehicle and have an address for the new owner, please forward a copy of this letter to the new owner and provide Agility with updated contact information at (949) 267-7745.

Note:  Federal law prohibits the delivery of affected vehicles or equipment under a sale or lease until the defect has been remedied.  Federal law also requires that any vehicle lessor receiving this recall notice forward a copy of the notice to the lessee with 10 days.

 

Can we assist further?

Please call Agility at (949) 267-7745 or send us an email at support@agilityfs.com if you have any questions or need further assistance.  Owners that are an unable to get their vehicles repaired in a reasonable time may write to the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Ave., S.E., Washington, DC 20590 or call the free Vehicle Safety Hotline at 1-888-327-4236 (TYY: 1-900-424-9153) or go to www.safercar.gov (reference NHTSA Safety Recall No. 20E019).

*           *           *

We apologize for the inconvenience, but we are taking this step in the interest of our customers’ safety and satisfaction with our products.  Our commitment, together with that of our authorized service representatives, is to provide you with the highest level of product service and support.

Thank you for your attention to this important matter.

Sincerely,

 

Kurt Nielsen
SVP of Corporate Operations
Agility Fuel Solutions LLC

 

Enclosures:     List of Vehicles and VINs

 


* * * IMPORTANT SAFETY RECALL * * *

NHTSA Recall 20E019

This notice is being sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act (NHTSA).  Agility Fuel Solutions LLC (Agility) has determined that a defect which relates to motor vehicle safety exists in certain pressure relief devices (PRDs) manufactured by EMER S.p.A. (EMER) (EMER PRD Part Numbers PRD2302T-004, PRD2322T001, PRD2322T-004, PRD2102T, PRD212, PRD 210OR) and EMER valves that contain these PRDs (EMER Valve Part Numbers MARK147-007 and MARK147-008).  Agility is conducting a safety recall to address this condition.  Our records indicate that you may have purchased some of the above-listed PRDs and/or valves as service and/or replacement parts.

 

What is the issue?

The EMER-supplied thermally activated PRDs and valves identified above may not vent a fuel system as intended when exposed to heat.  If a PRD, including a PRD within a valve, does not release, or is slow to release, during a fire on a fuel system, one or more system components may rupture, potentially causing equipment damage and/or personal injury.

 

What will Agility do?

If you the purchased PRDs and/or valves listed above, Agility will send you a free replacement PRD or valve that meets applicable specifications.  Replacement parts are currently available. For PRDs or valves that have been installed on vehicles, Agility will provide work instructions describing appropriate replacement procedures.

 

What should you do?

Please call Agility at your earliest opportunity at (949) 267-7745 to request replacement PRDs and/or valves.  If you no longer own the vehicle(s) on which one of the recalled PRDs or valves was installed and have an address for the new owner, please forward a copy of this letter to the new owner and provide Agility with updated contact information at (949) 267-7745.

Note:  Federal law prohibits the delivery of new motor vehicles or motor vehicle equipment under a sale or lease until the defect has been remedied.  Federal law also requires that any vehicle lessor receiving this recall notice forward a copy of the notice to the lessee with 10 days.

 

Can we assist further?

Please call Agility at (949) 267-7745 or send us an email at support@agilityfs.com if you have any questions or need further assistance.  Owners that are an unable to obtain the recall remedy within a reasonable time may write to the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Ave., S.E., Washington, DC 20590 or call the free Vehicle Safety Hotline at 1-888-327-4236 (TYY: 1-900-424-9153) or go to www.safercar.gov (reference NHTSA Safety Recall No. 20E019).

*           *           *

We apologize for the inconvenience, but we are taking this step in the interest of your safety and satisfaction with our products.  Our commitment, together with that of our authorized service representatives, is to provide you with the highest level of product service and support.

Thank you for your attention to this important matter.

Sincerely,

 

Kurt Nielsen
SVP of Corporate Operations
Agility Fuel Solutions LLC


* * * IMPORTANT SAFETY RECALL NOTICE* * *

NHTSA Recall 20E019

 

Dear Mr.

We are writing to inform you that Agility Fuel Solutions LLC (Agility) has determined that a defect relating to motor vehicle safety exists with respect to certain pressure relief devices (PRDs) manufactured by EMER S.p.A. (EMER) (EMER Part Numbers PRD2302T-004, PRD2322T-001, PRD2322T-004, PRD2102T, PRD212, PRD 210OR) and EMER valves that contain these PRDs (EMER Valve Part Numbers MARK147-007 and MARK147-008), which were supplied to you by Agility.  Agility is conducting a safety recall to address this condition.  Our records indicate that you may have purchased some of the above-listed PRDs and/or valves as service and/or replacement parts.

A copy of Agility’s amended Part 573 Defect Notification is enclosed for your convenience. This notification was initially submitted to the National Highway Traffic Safety Administration (NHTSA) on April 8, 2020 and amended on April 23, 2020.

 

What is the issue? 

The EMER-supplied thermally activated PRDs and valves identified above may not vent a fuel system as intended when exposed to heat.  If a PRD, including a PRD within a valve, does not release, or is slow to release, during a fire on a fuel system, one or more system components may rupture, potentially causing equipment damage and/or personal injury.

 

What should you do? 

  1. Recalled products in inventory. For any new PRDs and/or valves listed above that remain in your inventory, please contact Agility to arrange for return of the product for credit or free replacement.
  2. Recalled product in the hands of your customers and owners. It is critical that downstream resellers and end users be advised of this recall.  Accordingly, please do the following:

Reselling Customers:  You must forward copies of this letter within five (5) business days of receipt to each of your reselling customers who may have purchased the recalled products from you.  They should contact Agility for a refund or free replacement.

End Users:  Please check your records to identify any end-user purchasers of the recalled products and forward the enclosed end-user (owner) letter to them as soon as possible.  Alternatively, you can provide their contact information to Agility at support@agilityfs.com so that we can notify them of this recall and provide return instructions.

Federal law prohibits the delivery of affected new vehicles or equipment under a sale or lease until the defect has been remedied.

 

Can we assist further? 

Please call Agility at (949) 267-7745 or send us an email at support@agilityfs.com if you have any questions or need further assistance.

We apologize for the inconvenience, but we are taking this step in the interest of our customers’ safety and satisfaction with our products.  Our commitment, together with that of our authorized service representatives, is to provide you with the highest level of product service and support.  Thank you for your attention to this important matter.

Sincerely,

 

Kurt Nielsen
SVP of Corporate Operations
Agility Fuel Solutions LLC

Enclosures:
Copy of 573 Defect Notification (Amendment 1)
End User Letter


LETTER TO INTERMEDIATE- AND FINAL-STAGE MANUFACTURERS

* * * IMPORTANT SAFETY RECALL NOTICE* * *

NHTSA Recall 20E019

 

We are writing to inform you that Agility Fuel Solutions LLC (Agility) has determined that a defect relating to motor vehicle safety exists in Agility-supplied compressed natural gas (CNG) fuel systems equipped with certain EMER S.p.A. (EMER) pressure relief devices (PRDs) (EMER Part Numbers PRD2302T-004, PRD2322T-001, PRD2322T-004, PRD2102T, PRD212 and PRD 210OR) and EMER valves that contain EMER PRDs (EMER Part Numbers MARK147-007 and MARK147-008).  Agility is conducting a safety recall to address this condition.  Our records indicate that some of the affected CNG fuel systems were shipped to you. This recall also includes any of the above-listed PRDs and valves that you may have purchased as service and/or replacement parts.

A copy of Agility’s Part 573 Defect Notification is enclosed. This notification was submitted to the National Highway Traffic Safety Administration (NHTSA) on April 8, 2020.  An amendment was submitted to NHTSA on April 23, 2020.

 

What is the issue? 

The EMER-supplied thermally activated PRDs and valves identified above and installed on the subject CNG fuel systems may not vent the fuel system as intended when exposed to heat.  If a PRD, including a PRD within a valve, does not release, or is slow to release, during a fire on a fuel system, one or more system components may rupture, potentially causing equipment damage and/or personal injury.

 

What should you do? 

For affected fuel systems that remain in your inventory, please call Agility to schedule a repair. For any PRDs and/or valves listed above that you purchased as service or replacement parts, please contact Agility to arrange for return of any new (uninstalled) parts remaining in your inventory for credit.

For fuel systems installed in vehicles that have left your control (including those in which you installed one of the suspect PRDs or valves listed above), we encourage you to make a safety defect determination in accordance with 49 USC 30118 et seq. and, as appropriate, to submit a Defect Notification to NHTSA in accordance with 49 CFR Part 573. Agility and its authorized representatives will work with you to arrange owner notifications in accordance with 49 CFR Part 577 and replacement of the potentially defective PRDs on affected vehicles.  The defective PRDs will be replaced with PRDs that meet applicable specifications. Installation of the replacement PRDs is expected to take approximately one hour.  However, because the CNG fuel system needs to be defueled in order to install the replacement PRDs, each vehicle may need to be available for a longer period of time.  We will do our best to minimize the time that the vehicle needs to be available.

Agility aims to have this recall service completed on all affected vehicles as soon as possible and needs your assistance in locating them.  Therefore, please provide a copy of this letter and the attached owner letter to your affected customers and send the name, address and VIN information for the affected vehicle(s) to Agility Fuel Solutions at 3335 Susan St. Ste 100, Costa Mesa, CA 92868; Attention: Kurt Nielsen or electronically to support@agilityfs.com.  Agility will follow up with owners to arrange the repair.  If you were an intermediate-stage manufacturer and do not have VIN or owner contact information, we request that you obtain that information from your customers and forward it to us to follow up.

Federal law prohibits the delivery of affected vehicles or equipment under a sale or lease until the defect has been remedied.

 

Can we assist further? 

Please call Agility at (949) 267-7745 or send us an email at support@agilityfs.com if you have any questions or need further assistance.

We apologize for the inconvenience, but we are taking this step in the interest of our customers’ safety and satisfaction with our products.  Our commitment, together with that of our authorized service representatives, is to provide you with the highest level of product service and support.  Thank you for your attention to this important matter.

Sincerely,

 

Kurt Nielsen
SVP of Corporate Operations
Agility Fuel Solutions LLC

Enclosures:
Copy of 573 Defect Notification (Amendment 1)
Owner Notification Letter


2 Affected Products

Equipments

BRAND PART NO. PRODUCTION DATES
AGILITY FUEL SYSTEMS CNG FUEL SYSTEM
AGILITY FUEL SYSTEMS CNG PRESSURE RELIEF DEVIC

 


22 Associated Documents

Remedy Instructions and TSB

RCRIT-20E019-1538.pdf 1718.247KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [1.64 MB]

 


Remedy Instructions and TSB

RCRIT-20E019-2015.pdf 637.781KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [622.83 KB]

 


Remedy Instructions and TSB

RCRIT-20E019-4793.pdf 1743.947KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [1.66 MB]

 


Remedy Instructions and TSB

RCRIT-20E019-3666.pdf 1061.11KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [1.01 MB]

 


Remedy Instructions and TSB

RCRIT-20E019-1981.pdf 1136.086KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [1.08 MB]

 


Remedy Instructions and TSB

RCRIT-20E019-1325.pdf 2283.888KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [2.18 MB]

 


Remedy Instructions and TSB

RCRIT-20E019-1440.pdf 1767.966KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [1.69 MB]

 


Remedy Instructions and TSB

RCRIT-20E019-1681.pdf 2298.288KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [2.19 MB]

 


Remedy Instructions and TSB

RCRIT-20E019-3057.pdf 1135.574KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [1.08 MB]

 


Manufacturer Notices(to Dealers,etc) – Customer Letter – OEMs

RCMN-20E019-0248.pdf 160.008KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [156.26 KB]

 


Manufacturer Notices(to Dealers,etc) – Customer Letter – Loose Parts

RCMN-20E019-7523.pdf 154.776KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [151.15 KB]

 


ISSUED Owner Notification Letter(Part 577) – End User Letter – Parts

RCONL-20E019-6823.pdf 153.545KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [149.95 KB]

 


ISSUED Owner Notification Letter(Part 577) – End User Letter

RCONL-20E019-3830.pdf 158.277KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [154.57 KB]

 


Defect Notice 573 Report

RCLRPT-20E019-9721.PDF 225.477KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [220.19 KB]

 


Recall 573 Report – Amendment 1

RCLRPT-20E019-5748.PDF 234.194KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [228.71 KB]

 


Recall Acknowledgement

RCAK-20E019-4849.pdf 245.115KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [239.37 KB]

 


Remedy Instructions and TSB

RCRIT-20E019-4852.pdf 2601.497KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [2.48 MB]

 


Remedy Instructions and TSB

RCRIT-20E019-1731.pdf 1308.664KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [1.25 MB]

 


Remedy Instructions and TSB

RCRIT-20E019-1388.pdf 2654.504KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [2.53 MB]

 


Recall Quarterly Report #1, 2020-2

RCLQRT-20E019-7331.PDF 211.133KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [206.18 KB]

 


Recall Quarterly Report #2, 2020-3

RCLQRT-20E019-7430.PDF 211.229KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [206.28 KB]

 


Recall Quarterly Report #3, 2020-4

RCLQRT-20E019-2795.PDF 211.323KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [206.37 KB]

 


Latest Recalls Documents

For the Latest and Most Recent Recalls Information Visit the link below…

https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=20E019&docType=RCL

 


 

“This site contains affiliate links for which OEMDTC may be compensated”
Bestseller No. 1
MENSI 𝑴𝑬𝑵𝑺𝑰 Replacement of 3030 CNG 4.0" & LP 10" for Kitchen-Aid 710-0003 Gas Grill Natural Gas Conversion Kit Regulator with Hose 1/2" Male Flare Fitting 𝐏𝐫𝐞𝐬𝐞𝐭𝐬 𝐰𝐢𝐭𝐡 𝐋𝐏
  • ❤ Same as Origina Replacement Parts of Kitchen Aid NATURAL GAS CONVERSION KIT 710-0003 Natural Regulator Inside Not Including the Qucik Connect Hose. 𝐓𝐡𝐞 𝐏𝐫𝐞𝐬𝐞𝐭 𝐨𝐟 𝐠𝐚𝐬 𝐢𝐬 𝐟𝐨𝐫 𝐋𝐏 𝐏𝐫𝐨𝐩𝐚𝐧𝐞, If you want to use for Natural, Please adjust the top of regulator according our description steps by hand.
  • ❤ This conversion kit turns your KitchenAid liquid propane grill into a natural gas grilling machine by swapping out the existing components with an NG regulator and your current Natural hose.
  • ❤ Converts these KitchenAid grill models to NG: 720-0709, 720-0709B, 720-0709C, 720-0733, 720-0733A, 720-0745, 720-0745A, 720-0745B, 720-0787, 720-0787D, 720-0819, 720-0819A, 720-0891B, 720-0826, 720-0891R, 720-0893
  • ❤ Converts your dual-gas propane grill to natural gas ( You need an existed Natural Hose to Use with this NG Regulator Kit) . The Regulator is Adjustable. When the LPG gas regulating valve is used: LP inlet pressure is 2.74Kpa(11"w.c), outlet pressure is 2.45~2.55 kpa(10"w.c), and gas flow rate is 30L/min; When the natural gas regulating valve is used: LP inlet pressure is 1.74Kpa(7"w.c). Outlet pressure is 0.95~1.05 kpa(4"w.c), flow rate: 50L/min
  • ❤ The 1/2 PSI gas regulator of the 102-B model is compatible with natural gas and liquefied gas valves. The Fitting on the Regulator with 1/2" Male Thread and 3/8" Female Flare Fittings on the Hose.
Bestseller No. 2
TEENGSE Natural Gas Conversion Kit Regulator with Hose, 1/2" Natural Gas and Liquefied Interchange Pressure Regulator Replacement for 3030 CNG 4.0" & LP 10" for Kitchen-Aid 710-0003 Gas Grill
  • 【TWO MODES】: The 1/2 PSI gas regulator have both propane and natural gas mode. The factory setting of the nature pressure regulator is propane mode, if you need natural gas mode, please open the knob on the cover to convert the screw to natural gas mode, please refer to our picture for details.
  • 【SPECIFICATIONS】:The therad on the Regulator is 1/2" Male Thread and the end of house is 3/8" Female Flare. When using LPG regulating valve: LP inlet pressure is 2.74Kpa(11 "w.c), outlet pressure is 2.45~2.55 kpa(10 "w.c), gas flow rate is 30L/min; When using natural gas regulating valve: LP inlet pressure is 1.74Kpa(7 "w.c). Outlet pressure is 0.95~1.05 kpa(4 "w.c), flow rate is 50L/min.
  • 【FUNCTIONS】: This 102-B model rugulator converts your equipment that uses propane to one that uses natural gas. You can use it to replace the Kitchen Aid Natural Gas Conversion Kit 710-0003.Functions the same as the original part contents.
  • 【CONVERSION MODEL】: This natural gas pressure regulator can converts these KitchenAid grill models to NG: 720-0709, 720-0709B, 720-0709C, 720-0733, 720-0733A, 720-0745, 720-0745A, 720-0745B, 720-0787, 720-0787D, 720-0819, 720-0819A, 720-0891B, 720-0826, 720-0891R, 720-0893.
  • 【WARM TIPS】: The natural gas conversion Kit is rated to operate from -32°F to 225°F (0°C to 107°C) Do not install the regulator too close to heating equipment or use it in very cold environments. Heat and cold will change the resistance of the spring inside the regulator. The gas pressure regulator will not shut off the gas flow.
Bestseller No. 3
Hourleey RV Water Pressure Regulator, Adjustable Handle Brass Water Pressure Regulator, Water Pressure Reducer with Gauge and Inlet Screened Filter for RV Camper Travel Trailer
  • Upgraded Adjustable Handwheel: In contrast to conventional screw-adjustable RV water pressure regulators, this regulator features an enhanced adjustable hand wheel. No tools are required; simply use your hand to pull up the knob and turn it to adjust the water pressure.
  • Lead-free Brass: The regulator is crafted from high-quality lead-free brass, containing less than 0.13% lead, which is significantly lower than the lead-free standard required by NSF. This ensures a healthier and safer RV experience.
  • Easy to Use: With the ability to adjust pressure up to 160 PSI, this regulator allows for easy customization of water pressure settings. The pressure gauge provides clear visibility of the water pressure. Say goodbye to potential damage caused by excessive water pressure on your RV's pipes.
  • Standard Size: Designed with a 3/4" hose female inlet and 3/4" hose male outlet, this regulator is compatible with all American water sources and RV hoses. Please note that leaks may occur due to faulty or missing gaskets.
  • Wide Application: Equipped with a screened filter that effectively removes particles and prevents impurity blockage, this regulator is suitable for various applications such as home use, travel trailer camping, gardening, plumbing systems, etc.
Bestseller No. 4
Renator RV Water Pressure Regulator for RV Camper. Brass Lead-free Adjustable RV Water Pressure Regulator with Gauge. RV Water Regulator for Camper Travel Trailer, Reducer Valve W Filter. M11-0660R.
  • Best quality regulator on the market. Get the only regulator that is quality tested in the US using American standards, comes with a 1-year warranty and lifetime US-based support (available on packaging), and is made with superior quality brass and a more durable, liquid-filled gauge.
  • Easy to install, easy to use. Effortlessly adjust and monitor your water pressure, and enjoy strong showers and good water flow, while having the peace of mind knowing your RV is protected from high water pressure. Installation is as easy as attaching a water hose (each product comes with an illustrated guide).
  • 1-year warranty and U.S.-based phone and email support. Renator is one of the only companies based in the US; we do both secondary quality control in our Florida warehouse, and offer lifetime local phone and email support because we stand behind our product. The regulator is made out of heavy duty brass, the gauge is made of stainless steel and contains silicone oil to reduce friction of internal components and significantly increases the life of the product.
  • Low Lead. This regulator was modified to contain lowest amount of lead of any regulator on the market. Each batch of regulators is tested to contain less than .13% lead, well under the NSF requirements of .25%. The regulator's inlet screen also helps to filter out debris and other impurities.
  • Ready to use and universally compatible. The regulator is compatible with all US water sources, including 3/4" garden hose threads and NH threads, and is preset at 45 PSI. It is adjustable up to 160 PSI- we recommend referring to your RV’s manual for optimal settings. Contact us for any questions by clicking on our store name, "Cartlee", and clicking on the ask a question button.
Bestseller No. 5
Renator RV Water Pressure Regulator for RV Camper. Brass Lead-free Adjustable RV Water Pressure Regulator with Gauge. RV Water Regulator for Camper Travel Trailer, Reducer Valve W Filter. M22-0660R.
  • Best quality regulator on the market. Get the only regulator that is quality tested in the US using American standards, comes with a 1-year warranty and lifetime US-based support (available on packaging), and is made with superior quality brass and a more durable, liquid-filled gauge.
  • Easy to install, easy to use. Effortlessly adjust and monitor your water pressure, and enjoy strong showers and good water flow, while having the peace of mind knowing your RV is protected from high water pressure. Installation is as easy as attaching a water hose (each product comes with an illustrated guide).
  • 1-year warranty and U.S.-based phone and email support. Renator is one of the only companies based in the US; we do both secondary quality control in our Florida warehouse, and offer lifetime local phone and email support because we stand behind our product. The regulator is made out of heavy duty brass, the gauge is made of stainless steel and contains silicone oil to reduce friction of internal components and significantly increases the life of the product.
  • Low Lead. This regulator was modified to contain lowest amount of lead of any regulator on the market. Each batch of regulators is tested to contain less than .13% lead, well under the NSF requirements of .25%. The regulator's inlet screen also helps to filter out debris and other impurities.
  • Ready to use and universally compatible. The regulator is compatible with all US water sources, including 3/4" garden hose threads and NH threads, and is preset at 45 PSI. It is adjustable up to 160 PSI- we recommend referring to your RV’s manual for optimal settings. Contact us for any questions by clicking on our store name, "Cartlee", and clicking on the ask a question button.
Bestseller No. 6
8ft 0-30PSI Adjustable High Pressure QCC1 Propane Regulator Hose with Gauge 0-60PSI Gas Flow Indicator,3/8 Female Flare to 1/8 MNPT,3/8 MP and Street Elbow for Fire Pit,Turkey Fryer,Burner,Heater etc
  • Upgrade Adjustable Propane Regulator with Gauge: Simply connect QCC-1 connector to a 5-50LB propane tank and the 3/8" female flare fitting to the burning appliance.Switching the red knob could control the firepower from 0-30PSI,Upgrade pressure gauge can easily determine and regulate propane PSI.Measuring from 0-60 psi (as well as 1-4 100xKPA).
  • Stainless Steel Braided Hose: 8 ft (96") QCC-1/type hose is made of durable stainless steel braided with anti corrosion, anti-aging, air tightness, heat-resistance, flexibility features.This propane Regulator hose with CSA Certification,ensures air tightness and stability.
  • Wide Range of Applications: We match a 3/8 FLARE MNPT X 1/8 MNPT connector, and the matching with Propane hose 3/8" female flare connections can be widely used in turkey fryers, fire pits, smokers, propane forges, camp stoves, cookers, etc. as long as your appliance connection is 3/8" male flare connector.
  • Extended Application: This 8 ft Propane Regulator hose assembly with 3/8in MP x 3/8in MF Fitting, 3/8in Female x 3/8in Male Street Elbow Compatible with mr heater F273684 buddy heaters.The scope of diversified application makes your life more convenient and rich.
  • Packaging & Satisfaction Guarantee: 8 Feet Propane Regulator Hose; 1 Brass Orifice Connector 3/8 Flare MNPT x 1/8 MNPT; 3/8in MP x 3/8in MF Fitting, 3/8in Female x 3/8in Male Street Elbow; 1 Roll Yellow Sealing Tape and 420D Waterproof, Dustproof Storage Bag.If you are dissatisfied with the product, we guarantee a full refund or free replacement.Our customer service will solve your problem within 24 hours,please feel free to contact us.
SaleBestseller No. 7
KIBOW 0~60PSI High Pressure Adjustable Propane Regulator w/4FT Stainless Steel Braided Hose-Type1 (QCC1) and 3/8 Female Flare Swivel Fitting
  • 0~60PSI adjustable propane regulator w/ 4FT long stainless steel braided hose.
  • Built-in Excess Flow Protection and Thermal Protection for your safety. When your propane gas left in your tank too low, or the capacity flow of your appliance exceeds this regulator's Max. flow capacity too much, it will shutoff the gas flow automatically. The regulator can still work when those problems improved, unless it's defective itself.
  • Easy and quick to install. Type 1(QCC 1) tank end connector & 5/8"-18 UNF outlet connection-3/8 inch female flare fitting has an outside diameter of 5/8 inch. NO PTFE TAPE NEEDED FOR CONNECTION SEAL.
  • Perfect for furnace/forge/foundry.
  • Please DO NOT apply this regulator to an appliance which supposed to equipped with a LOW PRESSURE regulator.
Bestseller No. 8
5FT 0-30 PSI Adjustable High Pressure Propane Regulator with Gauge 0~60PSI Gas Flow Indicator Stainless Propane QCC1 Hose with 3/8 Flare x 1/8 MNPT Fits for LP Gas Cooker, Burner, Turkey Fryer, Smoker
  • ❤【Upgrade QCC1 Adjustable Propane Regulator】 This Propane Hose Adapter. Measure Your Pressure-Use the pressure gauge to determine and regulate your propane PSI. Measuring from 0-60 psi (as well as 1-4 100xKPA). This Pressure Gauge lets users control their heat with a precise level of accuracy Free with a brass orifice connector 3/8 Flare MNPT x 1/8 MNPT. This orifice can be for pipe fitting, grill, propane burner, propane heaters and all propane appliances that share the fittings
  • ❤【Premium Material】This Propane Hose Adapter is made of durable stainless steel braided,it can effectively reduce damage caused by friction and animal bites. with weather resistance, anti-corrosion, anti-aging, air tightness, heat-resistance, flexibility features,Durable solid brass provides secured connections between grill and turkey fryer or burner and tank. This Propane Hose ensures secure, air tightness and stability. Defeat ordinary black rubber Hose
  • ❤【Compatibility】Use black part fitting is QCC-1 connector connect the 40 Pound propane tank to 100 Pound, Don't need to move your atmospheric bottle. This Regulator Hose 0-30 PSI adjustable output is must have item for your propane burners Gas Pressure Gauge allow you precisely control the heat output level and keep your outdoor cooker or any grill in optimal operating condition.
  • ❤【Wide Application】5 Feet 0-30 PSI High Pressure Stainless Steel Hose with 3/8” female flare fitting, fit for gas grills, gas stoves, burners, turkey fryers, cooker, smokers, fire pit and heater, hot water heater, as long as your appliance connection is 3/8’’ male flare connector. Comes with accessories 3/8 Flare MNPT x 1/8 MNPT Suitable for gas burners
  • ❤【Note】This Max.flow capacity:136000BTU . Equipped with Excess Flow Protection. When your propane gas left in your tank too low,or the capacity flow of your appliance exceeds this regulator's Max. Flow capacity too much, It will shutoff the gas flow automatically. The regulator can still work when those problems improved,unless it's defective itself. NOTE: Your equipment's volumetric flow rate exceeds the maximum value of this regulator and will result in shutting off the gas flow and Not work
Bestseller No. 9
Air Compressor Regulator with Gauge, 0-160 PSI Adjustable Air Regulator with Protected Gauge 1/4'' NPT Brass Construction Air Pressure Regulator for Spray Guns, Air Compressor & Air Tools -by Drixet
  • Highly Versatile Air Regulator: Our air regulator is designed with a 1/4'' NPT fitting. It's perfect for keeping your spray guns running effectively and fits any professional spray gun.
  • Adjustable Pressure Settings: The air regulator 1/4 npt can be adjusted from 0 to 160 PSI. This helps in regulating pressure for your air tools and air compressor, ensuring optimal performance.
  • Integrated Gauge: This air regulator comes with a built-in gauge that provides measurements in kg/sq.cm and lb/sq.cm. The gauge is easy to read, making pressure adjustments a breeze.
  • Durable Construction: The air regulator is made of an aluminum alloy material with brass, metaled housing gauge. The steel protected gauge is designed to withstand abuse, providing reliable and long-lasting service.
  • Easy Installation and Use: This air compressor regulator with gauge is easy to install and disassemble. It features an easy thumbscrew adjustment valve control for quick pressure changes.
Bestseller No. 10
SURIEEN POL Propane Low Pressure Regulator, 3/8" Female Flare 1/2" Female NPT 3/8" Male NPT 1/4" Male NPT Gas Adapter for Barbecue Grill Camp Stove Patio Heater Low Pressure LPG Appliances Regulator
  • 【Replacement Part Number】The Low Pressure Propane Regulator Kit Replacement for part # F276136 Mr Heater 11" WC Lp low pressure regulator.
  • 【Low Pressure Propane Regulator】Soft Nose POL plug adapter full flow for propane tanks regulator with 3/8" flare female thread outlet. Flow Capacity (Max)75,000 BTU/hr, Outlet pressure 11in W.C. It can easily converter to connect the LP tank to your burner.
  • 【Versitle connectors】POL Low Pressure Propane Regulator Fittings thread include: 3/8" Male Flare x 3/8" Flare Male, 1/2" NPT Female x 3/8" Male Flare, 3/8" NPT Male x 3/8" Male Flare, 1/4" NPT Male to 3/8" Male Flare.
  • 【Wide Application】 Propane Low Pressure Regulator Kit Suitable for barbecue grills, camp stoves, patio heaters and other low pressure appliances using LPG.
  • 【Buy with Confidence】The POL Propane Low Pressure Regulator Valve Kit have one year warranty. If you meet any questions, simply contact us to get a replacement or refund. We provide friendly 24/7 customer service.

Last update on 2024-04-12 / Affiliate links / Images from Amazon Product Advertising API

This product presentation was made with AAWP plugin.

Leave a Comment

Share to...