channel 0.

42

The radio preset list is lost completely.

43

(Specifications) If a music was being played via USB when the audio system was turned
off at the last time, the audio system is to resume playing the same music automatically
when the same USB is plugged in at the next time. (Trouble Symptom) The system does
not resume playing from the previously played music and starts to play from the first
music in the USB.
When resuming a USB audio playing after editing the folder structure and/or the order
of the music in the USB by PC, a mismatch between the played tracks and the displayed
track names occurs.
After indicating "Play Artist ******" via voice recognition, the user selects a specific
music on the displayed list to start USB audio playback. Then, instead of the music on
the list, the specific music from the first album of that artist will be played.
After all music has been played by USB audio with the repeat function in “off” position,
music cannot be played after pressing search to switch the playing mode (folder, artist,
album, etc.) and selecting a music.
Voice recognition does not recognize certain SXM channel names.

44
45
46
47
48

When starting hands-free call using voice recognition commands, a warning message
"Please wait a minute" appears on the meter display and the call cannot be initiated.

49

When using the voice recognition feature while playing audio or radio, the speaker may
not sound.

50

When updating the CCU software from Dealership Mode, a progress bar for the
installation stops in the middle of the process and the update is not completed.

Continued...
Bulletin Number: 15-261-20R; Revised: 05/15/26

Page 42 of 68

List of New Functions and Enhancements Included in Update #9:
Number

New Functions and Enhancements

1

To improve the chance of reestablishing the connection in case of connection failure of
Bluetooth and/or Android Auto due to error in the smartphone side, the CCU sends a
request to the smartphone device again as additional attempt.

2

CCU Support vertical screen displays for Android Auto, but the actual display screen
size differs depending on the Android device's OS version.

3

Update against vulnerability in security of Bluetooth connection.

4

When getting CCU USB logs at the Diagnostics Recorder screen in the Dealership
Mode, it was necessary to turn off ""Begin Recording"" to ""Export Data to USB.""
And after the log acquisition, it was necessary to turn ""Begin Recording"" ON again.
The system interface is improved so that ""Begin Recording"" is automatically switched
ON after log acquisition has been accomplished.

Symptoms Addressed By Update #8:
Number

Symptoms to be Improved:

1

Unexpected CP1 system reboot resulting from an inter reset to sync internal
communication with Bluetooth module.

2

CID restarts itself right after engine is started.

3

CID resets and reboots.
Continued...

Bulletin Number: 15-261-20R; Revised: 05/15/26

Page 43 of 68

Number

Symptoms to be Improved:

4

Right after starting up, the CID is blank only displaying the background without icons.

5

Loss of audio output for AM/FM

6

Loss of audio output from all sources. Voice from telematics, meter buzzer or beep
sound are not affected.

7

Sound is lost when playing Bluetooth audio even though the screen is displayed without
problem. It can occur when the audio source is switched repeatedly between the Bluetooth and others.

8

SXM radio output is lost after terminating a handsfree phone call.

9

No audio played back when using CarPlay.

10

Sound volume control does not work while using Android Auto.

11

Cyclic short noise like a drilling or vibration is heard from speakers.

12

After the engine is started, a message of “Loading Navigation...” continues to be displayed, but the map is not displayed.

13

Vehicle position on navigation map erroneously moves to zero degrees latitude and zero
degrees longitude (0°N 0°E or west of Africa in the Atlantic ocean).

14

Navigation map scale is changed to the lowest setting (globe is displayed).

15

When “Call” button is pressed in “Confirm Destination” screen of Navigation system
(to call the destination site,) the call can be made but the screen does not transit to phone
call screen.
Continued...

Bulletin Number: 15-261-20R; Revised: 05/15/26

Page 44 of 68

Number
16

Symptoms to be Improved:

When selecting “Phone-”>”Message,” message received time is displayed incorrectly as
“1/1/0.”
It can occur with an Android phone with a specific Android OS (Pixel 6, Pixel4a, Pixel4XL, Xperia etc. ) in which time zone data is attached to the message receiving time.

17

Even when using the same mobile device that was paired previously, a message of “Are
you sure you want to activate this profile?” is prompted and confirmation is needed to
activate the device.

18

Cover art of previous music is displayed when playing music without cover art in USB
audio. It can occur when music with and without cover art is mixed and stored together
a single USB.

19

Command “Play Artist <Artist name>”” to play all music of particular artist in USB
music mode, only the first item listed for the artist is played.

20

While playing music from USB, the music title displayed on the screen differs from
what is being played. It can occur by the following sequence of operation:
1. Display a list of music on the USB audio screen.
2. Change the screen to other screen than the music list.
3. The music play is continued and moved on to a music in a different music list.
4. Change the screen back to the music list in the USB audio screen.

Continued...
Bulletin Number: 15-261-20R; Revised: 05/15/26

Page 45 of 68

Number
21

Symptoms to be Improved:

In USB music mode, some music is skipped and the music in the next folder is started.
Under following condition
1. Play USB music in “Folder” mode with repeat mode setting “Repeat All.”
2. Turn Ignition Switch off then open/close door and keep it locked for more than 5
minutes.
3. Turn Ignition Switch on and operate “Track Up/Down” on the audio system.

22

The mode does not switch to Media, after “Media” icon is selected.

23

When selecting shortcut for SXM channel on “Home” screen, the screen is changed to
SXM but no sound is coming or no channel name is displayed.

24

When using FOTA service to update the software by selecting “Setting” > “Software
Update,” a message of “A new software update is available. Would you like to download
it now?” is displayed but the downloading does not start after pressing “OK.” When this
symptom occurs, it comes back to the “Software Update” screen. The downloading can
be started by pressing the “Update” on the “Software Update” screen.
(Temporary solution.)

25

When Pre-Collision Braking System is activated, a message of “Obstacle Detected” is
displayed on the information bar and does not go away.

26

Preset SXM channel cannot be selected by satellite switch on the steering wheel.

27

Even after setting the date of next scheduled maintenance in Reminder screen, the date
is displayed as “--”. It can occur when only the date of schedule maintenance is set without entering distance.

Bulletin Number: 15-261-20R; Revised: 05/15/26

Page 46 of 68

Number

Symptoms to be Improved:

28

When pop up screen (like suggestion of taking a rest) is displayed on CarPlay screen,
the screen does not transit to proper screen (like destination search screen) and goes
back to CarPlay screen even after pressing “Yes.”

29

When selecting a music by <Artist> or <Album,> using voice recognition system, a
wrong music that had been played at the end of previous time is played. It can occur by
the following sequence of operation:
1. Play music in USB audio mode.
2. Change the source from USB to another one.
3. Turn Ignition Switch off then on.
4. Start to play music by pronouncing <Artist> or <Album> though voice recognition
system.

30

A wrong search location is used on TravelLink function. Example of the symptom.

Continued...
Bulletin Number: 15-261-20R; Revised: 05/15/26

Page 47 of 68

List of New Functions and Enhancements Included in Update #8:
Number
1

New Functions and Enhancements
New shortcut button(s) are added in button bar of “Home” screen.
1. AVH (Auto Vehicle Hold) ON/OFF Button.
2. Auto Start Stop ON/OFF Button. (If equipped)
For vehicle equipped with AVH and Auto Start stop:

For vehicle equipped with AVH (only):

2

Air conditioner control interface is changed to that of 23MY.
Current ( -22MY) screen transition:

23MY screen transition:

Continued...
Bulletin Number: 15-261-20R; Revised: 05/15/26

Page 48 of 68

Symptoms Addressed By Update #7:
Number

Symptoms to be Improved:

1

The CID stays black following reboot. Reset doesn’t always recover this condition.

2

The CID stays black or very dark even after the ignition switch is turned on due to back
light malfunction.

3

When using CarPlay, the screen goes to black and/or CID restarts. It occurs when the
CID processor falls under irregularly high load conditions.

4

The CID restarts about 3 minutes after turning on the Ignition Switch. It occurs when
the CID processor falls under irregularly high load conditions.

5

System reboot due to application failure. Software robustness has been imporved to
prevent CID and CCU from resetting whenever its individual function fails.

6

When the vehicle comes to a place on a highway where there are multiple exits with
combinations of alphabets and numbers (see example below) the CID cannot
process the information correctly for turn-by-turn navigation and restarts.
Example:

7

CID restarts when Navigation system is re-routing the route crossing the border of the
states.
When the customer veered off navigated route and the re-routed route includes the
roads across the boarder of states, the calculation is not properly processed and the CID
restarts.

8

CID restarts, while it is connected to Wi-Fi. It occurs when Wi-Fi signal includes illegible data.

9

CID restarts after the ignition switch is turned off and on again before the CID shuts off.

10

No functional response on touch screen in Radio mode even though the touch sound and
visual reaction are confirmed.

11

Reprogramming process takes extensive time (40 minutes or more.)
After the ignition switch is turned off and on again, the combination meter display mode
changes itself and shows the ECO gauge (Current fuel consumption/Driving range on
remaining fuel.) Both attribute to processing errors in CCU.

Continued...
Bulletin Number: 15-261-20R; Revised: 05/15/26

Page 49 of 68

Number

Symptoms to be Improved:

12

When conducting USB reprogramming, the screen transition to error screen instead of
confirmation screen.

13

When “Software Update” is selected in the Dealership Mode, the following
initialization process does not end more than 20 minutes. *

14

Note* In case this USB update failure occurs, retry updating according to the instructions in “Appendix A
When the FOTA pop-up (new software availability notification) is displayed while the
CarPlay is being used, the display comes back to CarPlay screen even if the customer
tries to get into the FOTA screen.

Continued...
Bulletin Number: 15-261-20R; Revised: 05/15/26

Page 50 of 68

Number

Symptoms to be Improved:

15

Call function does not work in the Message List (after ignoring the incoming message
notification.). However, the call function can still be used after getting into the Message
Content screen by tapping the message list.

16

Message reading function of short mail does not resume and ends once it is interrupted
by barge-in voices for other functions.
After the Ignition Switch is turned on, the SI-DRIVE indicator starts blinking and the
derive mode cannot be changed.

17

18

CarPlay does not work when the ignition switch is turned on immediately after the
driver’s door is opened with the iPhone (iPad) cable connected to the AUX TERMINAL
(USB Hub.)

19

CarPlay drops off randomly after running without interruptions for an extended period
of time.

20

Steering wheel control switches don’t always work with Android Auto for audio streaming contol.

21

The Turn By Turn information is not displayed on the MID, when changing meter display modes with Steering wheel control switch, while using route navigation of Google
Map with Android Auto.
Android Auto stops working after calling to one of the STARTLINK support functions,
while there is an active navigation route with Google Map via Android Auto.

22
23

Soon after the cable has been removed from the AUX TERMINAL (USB Hub), icons
on Home Screen stop functioning.

24

Phone Book is displayed in the order of the First Name even though the display setting
was made in the order of Family Name.

Continued...
Bulletin Number: 15-261-20R; Revised: 05/15/26

Page 51 of 68

Number

Symptoms to be Improved:

25

No response when touching “Traffic & Weather Now (TWN)” on SMX screen.

26

SXM has blank screen and no sound when the SXM screen had been selected as
audio source at the previous ignition off timing.

Continued...
Bulletin Number: 15-261-20R; Revised: 05/15/26

Page 52 of 68

Number

Symptoms to be Improved:

27

About 30 seconds after starting the SXM the operation is paused with loading screen
and resume after another 30 seconds. This symptom occurs when the SXM screen had
been selected as audio source at the previous ignition off timing.

28

SXM has blank screen and no sound when the audio source is change to SXM.

29

“Fast forward” does not work in SXM replay function. (Fast Rewind works.)

30

The team logo is not displayed on Sports Flash screen when the SXM screen had been
selected as audio source at the previous ignition off timing.

Continued...
Bulletin Number: 15-261-20R; Revised: 05/15/26

Page 53 of 68

Number

Symptoms to be Improved:

31

The team logo is not displayed on Sports Flash screen when the SXM screen had been
selected as audio source at the previous ignition off timing.

32

No sound on Radio after changing to Radio screen.

33

Sudden interruption of the audio playback from audio system and/or voice guidance of
Navigation system.
The audio source change function and all icons become inoperative temporarily, after
the ignition turned off and on again while playing audio source.
HD Radio sub channel cannot be played after selecting a HD Radio station from the preset stations and selecting the HD sub channel 2 even though the HD radio information is
correctly displayed.

34
35

List of New Functions and Enhancements Included in Update #7:
Number

New Functions and Enhancements

1

Icons of home screen change to those of the US specifications even though the original
specification is not of the US.

2

Two ways of MOTA operations, i.e., by connect CCM to Wi-Fi or by transferring the
downloaded map data to CCM via smart phone are executed simultaneously by error.

Continued...
Bulletin Number: 15-261-20R; Revised: 05/15/26

Page 54 of 68

Number
3

New Functions and Enhancements
"One of the Pop-up Error Messages displayed during the FOTA operation in case of
weak Wi-Fi signal is not intuitive. Even if the customer tap “OK,” it does not transit to
another screen.

As the improvement for this inconvenience, the message is changed so that the customer
finds the reason why the FOTA operation has been paused. Also a “Resume” button is
prepared so that the customer can do the rest of operations after necessary action (moving the vehicle to another place with better Wi-Fi connection**, or tethering the CP1 to
a mobile phone, etc.)
Note** The FOTA operation can be paused when the Wi-Fi indicator at the upper right
corner of the CID is not in “Good” or “Excellent” as shown below."

4

To prevent the overall CID system (CCU) from being reset whenever its individual
function fails, the robustness of the software has been improved.

5

CD returns to CD deck too fast to pick it out after ejection button has been pressed. As
the countermeasure, the pausing time is extended to ease the operation.

6

Past DTC stored in the CCM cannot be captured by SSM when new current DTC is
detected. Both DTC’s can be captured by SSM after letting the system into sleep mode
and turning the Ignition Switch on again.
Music in the different folder in a USB stick can be selected by Track-UP/Down