NHTSA ID Number: 11032735
Manufacturer Communication Number: B012016
TSB/Document Date: 2026-05-18
Summary
The Footwell Module (FRM) limited warranty for defects in materials and / or workmanship has been supplementarily increased to 15 years / 186,000 miles as determined from the original first in-service / delivery date.
Please be sure to also perform any additional before and/or after work (including attaching labels) as
required by the open campaigns on the vehicle. Close any other open programming and encoding
Campaign repairs as outlined in the corresponding Service Information Bulletin.
Vehicle Programming and Encoding – Additional Work (RO and Claim Comments Required)
This procedure automatically reprograms and encodes any vehicle control modules that do not have
the latest software I-level.
If one or more control modules fail during the reprogramming procedure, claim the required
consequential repair work procedures to address this issue (including performing the IRAP Control
Unit Recovery first as required, refer to the SIB in AIR) under the Repair Code in this bulletin together
with the corresponding labor operation codes and their flat rate unit (FRU) allowance(s), including the
diagnosis* that applies.
Please explain the additional work procedures that were performed (The why and the what) on the
repair order and in the claim comments.
For covered repairs that address control module failures that occurred prior to performing this
reprogramming procedure, claim this work with the appliable Repair Code listed in AIR together with
the corresponding labor operation codes and their flat rate unit (FRU) allowance(s), including the
diagnosis* that applies.
(*) Based on which one applies to your center, please refer to SI B01 01 20 or B01 07 20 for the
applicable procedure for documenting, claiming, and explaining, on the RO and in the claim
comments, your diagnosis work time (WT), job/repair work time (WT), and the vehicle repairs your
center performed, unless otherwise required by State law.
Previous Customer-Pay Repairs – Limited Warranty Extension Reimbursement
BMW of North America, LLC (BMW NA) will reimburse certain costs for qualifying customer-pay
repairs that were performed on an eligible vehicle prior to the release of this updated componentspecific extended limited warranty coverage.
Note: The footwell module’s extended limited warranty coverage period has been increased to
15 Years / 186,000 Miles from 10 Years /156,000 Miles with the posted update of this bulletin
dated March 2025.
A qualifying customer pay repair must primarily be for a covered FRM repair for the issues
described in this Service Information Bulletin. Also, the repair facility ‘s procedures to address
the above situation must have been performed correctly, adequately, and completely, as
required by the applicable BMW Group approved repair standards and instructions.
Customer-pay repairs are subject to the same vehicle eligibility requirements, limitations, and
exclusions that apply to the BMW New Vehicle Limited Warranty for Passenger Cars and Light
Trucks.
Repairs That Do Not Qualify for Reimbursement
Repairs performed on ineligible vehicles, eligible vehicles operated and repaired outside the United
States and Puerto Rico, or the diagnosis and repair of issues that are outside the intended scope of
this extended coverage, engine damage is not covered, other unrelated issues, and/or that are due to
outside influences are not covered by this limited warranty extension. This exclusion also applies to
repairs that were performed using (including those repairs that result from using) non-genuine BMW
parts and/or used BMW passenger car or light truck parts.
Requesting Reimbursement for a Previous Repair That Qualifies
For a customer to request reimbursement for a qualifying customer-pay repair performed either by an
authorized BMW center or independent repair shop located in the United States (including Puerto
Rico), please have him/her submit his/her reimbursement request online at www.BMW-RP.com under
the following reference:
•
BMW ELW Footwell Module
Reimbursement Request Procedure
The online process is initiated by attaching/sending PDF files of the supporting documentation for the
prior repair.
The letter also includes alternative methods to request reimbursement, either through the mail or by
fax as described below:
BMW Customer Reimbursement Center
Attention: BMW ELW Footwell Module
P.O. Box 54067
Hurst, Texas 76054
Fax number: 877-434-2992
Please allow 4-6 weeks for processing your request.
Should you have any questions concerning this reimbursement process, please call 1-844-857-0341.
FEEDBACK REGARDING THIS BULLETIN
Technical Feedback
Warranty Feedback
Parts Feedback
To submit feedback for the technical topic of this bulletin: Submit your
feedback in the rating box at the top of this bulletin
To submit feedback for the CLAIMS section of this bulletin: Submit an IDS
ticket to the Warranty Department, or use the chat available in the Warranty
Documentation Portal
To submit feedback for the PARTS section of this bulletin: Submit an IDS
ticket to the Parts Department
Attachment 1 to SI B01 20 16
March 2025
BMW
March 2025
Footwell Module (FRM) Extended Limited Warranty (ELW) Increase To 15 Years/186,000 Miles
Certain applicable Model and Model Year BMW E7x, E84 SAVs/SACs, E8x, E9x Sedans, Coupes,
Convertibles, E89 Roadsters, and E91 Sports Wagons may be affected.
What is the specific issue?
Either while preforming diagnosis and/or a vehicle software update procedure, or after a 12-volt battery
disconnect, or a 12-volt power supply interruption on an affected vehicle, the Footwell Module (FRM) may fail
(Consequential).
This can be caused by either a compatibility issue with certain combinations of vehicle software i-Levels and
the version of the Footwell Module's hardware that is installed in the vehicle.
Or, the Footwell Module (FRM) itself failed prior to performing any vehicle diagnosis, or any other related
repair work procedures.
Have you previously paid for this type of FRM repair?
Prior to the release of this latest update to this component-specific extended limited warranty, if you
previously paid for a repair that addressed / corrected an issue like the ones described above, you may be
eligible to be reimbursed for certain previously paid repair costs that qualify.
Addressing and repairing other vehicle issues and/or issues caused by installed non-genuine BMW
parts
and/or used BMW passenger car or light truck parts are not covered under this extended limited warranty.
To request a reimbursement review of your previous customer pay repair invoice (Authorized BMW center or
an independent repair shop), please submit your request on-line at www.BMW-RP.com under the following
reference:
• BMW ELW Footwell Module
Reimbursement Request Procedure
The on-line process is initiated by attaching/sending legible PDF files of the required supporting
documentation for the previously paid repair. Please refer to page two (2) of this document and BMWRP.com for additional information about what repair order (RO)/invoice documentation is required.
Please include a copy of the completed page two (2) reimbursement request checklist together with the
other applicable required documentation.
The alternative method to request a reimbursement with the required documentation, either through the mail
or by fax, is described below:
BMW Customer Reimbursement Center
Attention: BMW ELW Footwell Module
P.O. Box 54067
Hurst, Texas 76054
Company
BMW of North America, LLC
BMW Group Company
Website
www.bmwusa.com
Fax number: 877-434-2992
Please allow 4-6 weeks for processing your request.
Should you have any questions concerning this reimbursement process, please call 1-844-857-0341.
Sincerely,
BMW of North America, LLC
B01 20 16 FRM ELW (2025 Update)
183
1
Attachment 1 to SI B01 20 16
March 2025
BMW Footwell Module (FRM) Extended Limited Warranty (ELW)
Previous Customer-Pay Repair Reimbursement – Required Documentation Checklist
Reimbursement for a qualifying customer pay repair is available to the BMW owner/lessee who incurred the expense. The
questions below will assist you in reviewing your repair order/invoice documentation.
Prior Repair Review Questions
Answers - One per Row
Did a prior repair to your vehicle address an issue with the FRM like the ones
that are described in this letter?
Yes, next
No
Did you pay for this repair?
Yes, next
No
Does the repair facility's documentation confirm that the FRM was the cause of
the issue with your vehicle?
Yes, proceed to the
checklist
No
When a Prior Repair Review Question’s result is a “No” response, no further action is required.
Note: Within the applicable BMW models and model years, there are affected and non-affected vehicles.
A qualifying customer pay repair must primarily address an FRM-related issue that is described in this letter.
Also, the repair facility ‘s procedures to correct the issue must have been performed correctly, adequately, and
completely as required by the applicable BMW Group approved repair standards and instructions.
Required Repair Order (RO) or Invoice Documentation - Checklist
For a previous repair reimbursement request, please include a completed copy of this page 2 Required Documentation
Checklist (one per repair/request) together with legible copies (either a scan, photo, PDF, and/or screenshots) of the
following documentation with your name, address, and your preferred contact telephone number(s) and email
address(es).
This documentation must include the following information:
Customer name and address
Vehicle Identification Number (“VIN”)
The date of repair
The mileage when the repair was performed
Itemized list of labor charges for all repairs* including diagnosis
Itemized list of parts (Part numbers), including any miscellaneous items, billed for all repairs*
(*) For repair orders containing multiple repair line items, reimbursement consideration will only be given to those line-item
expenses that are directly related to the specific repair that is now covered by this component issue and repair-specific
extended limited warranty.
Required Proof of Payment Documentation
Please provide a copy of at least one of the following items as valid proof of payment:
Repair order (RO)/invoice stamped and dated as “PAID”
Cancelled check
Signed credit/debit card receipt
Credit/debit card statement
BMW of North America, LLC (“BMW NA”) reserves the right to review and adjust/reduce the amount that will be
reimbursed based on what is normally recognized as customary, fair, and reasonable, to diagnose, perform a repair,
or replace a component (including the applicable and scope of replacement parts, and related materials) to address an
operational issue with the vehicle.
Except for reasonable account number protection measures, illegible, altered/modified, incomplete, non-authentic
and/or fabricated repair order/invoice documentation will not be accepted.
B01 20 16 FRM ELW (2025 Update)
2
Attachment 2 to SI B01 20 16
BMW
September 2025
7600 S GRANT STREET
BURR RIDGE, IL 60527
DO NOT MAIL REPAIR ORDERS TO THIS ADDRESS
1
€=E"q'AA!N rHB+
€TB B1?&_A_D7V
yi)9Yy yyiIIYII)
Sample
Sample
Sample
„„ƒ‚‚„„‚‚„ƒ‚‚‚„ƒ„ƒ„‚‚ƒƒ„ƒ‚„„‚ƒ„„ƒ‚‚„‚ƒƒƒ‚ƒƒ‚„‚‚
September 2025
Effective with the date above, this Important Vehicle Limited Warranty Information applies to the BMW
model with the Vehicle Identification Number (VIN) WBADW3C59DJ123456.
Dear BMW Owner/Lessee:
For the above-referenced vehicle, BMW of North America, LLC (“BMW NA”) is extending the limited warranty
for your vehicle's:
•
Footwell Module (FRM) to 15 years / 186,000 miles, whichever occurs first, as determined from
your vehicle's original first in-service / delivery date.
•
Many applicable vehicles will be eligible for both a qualifying prior repair reimbursement, and the
remainder of the FRM extended coverage period going forward. While some other applicable
vehicles will only be eligible for a qualifying prior FRM repair reimbursement when it was
performed during the extended coverage active period.
Due to vehicle software and hardware compatibility issues with a correctly fitted vehicle, either while
performing electronic system diagnosis, a vehicle software update procedure, or after a 12-volt battery
disconnect / power supply interruption, the Footwell Module (FRM) may fail consequentially, or the Footwell
Module itself (FRM) may have failed.
This component-specific extended limited warranty (ELW) applies to defects in materials and/or
workmanship. This coverage is subject to the same vehicle eligibility requirements and limitations that apply
to the BMW New Vehicle Limited Warranty for Passenger Cars and Light Trucks.
This is a notice of a “component-specific" limited warranty extension. This is not a notice of a Recall
or Service Action.
If your vehicle is experiencing a situation like the one described above, please contact your authorized BMW
center to schedule an appointment to have the issue with your vehicle diagnosed.
After the BMW center confirms that the scope of your vehicle’s issue, and that this extended limited warranty
coverage corresponds and applies to the required vehicle repair, and your vehicle qualifies, the authorized
BMW center will perform the applicable covered FRM replacement repair, or a BMW approved reset
procedure (when available) free of charge.
Company
BMW of North America, LLC
BMW Group Company
Mailing Address
PO Box 1227
Westwood, NJ
07675-1227
Website
www.bmwusa.com
Repairs performed on ineligible vehicles, eligible vehicles operated and repaired outside the United States
and Puerto Rico, or the diagnosis and repair of issues that are outside the intended scope of this extended
coverage, other unrelated issues, and/or that are due to outside influences are not covered by this limited
warranty extension. This exclusion also applies to repairs that were performed using (including those repairs
that result from using) non-genuine BMW parts and/or used BMW passenger car or light truck parts,
especially those parts that have embedded vehicle / version information that does not match and/or is not
compatible with the vehicle being repaired.
BMW NA will also reimburse certain costs for qualifying customer-pay repairs that were performed prior to
the release of this component-specific extended limited warranty coverage as described in this letter.
We are determined to exceed your expectations, and we hope that this focused extended limited warranty
coverage will further enhance your ownership experience.
Sincerely,
BMW of North America, LLC
€=E"q'AA!N rHB+
€TB B1?&_A_D7V
yi)9Yy yyiIIYII)
BMW ELW FRM 15Y/186M (B01 20 16 - 2025)
64194
1
Attachment 2 to SI B01 20 16
September 2025
BMW FRM - Extended Limited Warranty (ELW)
Previous Customer-Pay Repair – Required Documentation Checklist
VIN: WBADW3C59DJ123456
Reimbursement for a qualifying customer pay repair is available to the BMW Owner/Lessee who incurred the expense. The
questions below will assist you in reviewing your repair order/invoice documentation. When all your responses below are
“Yes,” and after completing the Checklist, proceed to page three (3) for further instructions.
Prior Repair Review Questions
Answer - One per Row
Was the the FRM replaced to correct an issue like the ones described in this letter?
Yes, next
No
Did you pay for this repair?
Yes, next
No
As determined by your vehicle’s original first in-service / delivery date (age) when the repair
was performed, was the vehicle still within 15 years (180 Mths)/186,000 miles?
Within 15/186,
Yes, next
No
Did the repair facility's diagnosis confirm an issue with the FRM? (It did not fail because of
an outside influence).
Yes, proceed to the
checklist
No
When a Prior Repair Review Question’s result is a “No” response, no further action is required.
Required Repair Order (RO) or Invoice Documentation - Checklist
For a previous repair reimbursement request, please include a copy of your completed page 2 document (one per
repair/request) together with legible copies (either a scan, photo, PDF, and/or screenshots) of the following documentation
with your name, address, and your preferred contact telephone number(s) and email address(es).
This documentation must include the following information:
Customer name and address
Vehicle Identification Number (“VIN”)
The date of repair
The mileage when the repair was performed
Itemized list of labor charges for all repairs* including diagnosis
Itemized list of parts (Part numbers), including any miscellaneous items, billed for all repairs*
(*) For repair orders containing multiple repair line items, reimbursement consideration will only be given to those line-item
expenses that are directly related to the specific repair that is now covered by this component issue and repair-specific
extended limited warranty.
Required Proof of Payment Documentation
Please provide a copy of at least one of the following items as valid proof of payment:
Repair order (RO)/invoice stamped and dated as “PAID”
Cancelled check
Signed credit/debit card receipt
Credit/debit card statement
BMW of North America, LLC (“BMW NA”) reserves the right to review and adjust/reduce the amount that will be
reimbursed based on what is normally recognized as customary, fair, and reasonable, to diagnose, perform a repair,
or replace a component (including the applicable and scope of replacement parts, and related materials) to address an
operational issue with the vehicle.
Except for reasonable account number protection measures, illegible, altered/modified, incomplete, non-authentic
and/or fabricated repair order/invoice documentation will not be accepted.
€=E"q'AA!N rHB+
€TB B1?&_A_D7V
yi)9Yy yyiIIYII)
BMW ELW FRM 15Y/186M (B01 20 16 - 2025)
18302
64194
2
Attachment 2 to SI B01 20 16
September 2025
BMW FRM ELW
Previous Customer-Pay Repair - Reimbursement Request
VIN: WBADW3C59DJ123456
Eligible and Qualifying Previous Customer Pay Repairs
BMW of North America, LLC (BMW NA) will reimbursement certain costs for qualifying customer-pay repairs that were
performed on eligible vehicles prior to the release of this component-specific extended limited warranty.
A qualifying customer pay repair must primarily be for a repair to address a covered issue with the the vehicle's FRM.
Also, the repair facility‘s procedures to address the situation described must have been performed correctly,
adequately, and completely, as required by the applicable BMW Group approved repair standards and instructions.
Customer-pay repairs are subject to the same vehicle eligibility requirements, limitations, and exclusion criteria that applies to
the BMW New Vehicle Limited Warranty for Passenger Cars and Light Trucks (Including that the vehicle's true mileage can
be determined).
Repairs that Do Not Qualify for Reimbursement
Repairs performed on ineligible vehicles, eligible vehicles operated and repaired outside the United States and Puerto Rico,
or the diagnosis and repair of issues that are outside the intended scope of this extended coverage, other unrelated issues,
and/or that are due to outside influences are not covered by this limited warranty extension. This exclusion also applies to
repairs that were performed using (including those repairs that result from using) non-genuine BMW parts and/or used BMW
passenger car or light truck parts, especially those parts that have embedded vehicle information that does not match and/or
is not compatible with the vehicle being repaired.
Requesting Reimbursement
To request reimbursement for a qualifying customer pay repair performed either by an authorized BMW center or
independent repair shop located in the United States (including Puerto Rico), please submit your reimbursement request online at www.BMW-RP.com under the following reference:
•
BMW ELW Footwell Module
Reimbursement Request Procedure
The on-line process is initiated by attaching/sending PDF files of the supporting documentation for the prior repair (A copy of
a completed page two (2) checklist, together with the other required documentation).
The alternative method to request reimbursement, either by mail, or by fax, is provided below:
BMW Customer Reimbursement Center
Attention: BMW ELW Footwell Module
P.O. Box 54067
Hurst, TX 76054
Fax number: 877-434-2992
Please allow 4-6 weeks for processing your request.
Should you have any questions concerning this reimbursement process, please call 1-844-857-0341.
€=E"q'BA!N rFB+
€SCKP=XY~ WcV
y yYy9 9Yyi )y)Y)
BMW ELW FRM 15Y/186M (B01 20 16 - 2025)
64194
3
- 🔥🔥🔥🚀 【2026 Professional All-System Diagnostic...
- 🛠【28+ Essential Service Resets & Special Functions...
- ⚡ 【Advanced Bidirectional Active Test for Precise Fault...
- 🌐 【Wide Vehicle Coverage & 2026 New Car Support with...
- 💻 【Powerful Hardware & FCA
SGW Bypass for Enhanced...
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: B012016
Replacement Service Bulletin Number:
MFR Communication Date: 2026-05-06
MFR Internal Campaign ID/Software Version: 6135901000
Communication Type: Warranty Program/Extension
NHTSA Components: ELECTRICAL SYSTEM
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
- Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
- 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
- Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission, ABS, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
- Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCA Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU coding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations
- 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCA AutoAuth: Now supports FCA SGW module for Chrysler, for Jeep, for Dodge (2018+), for Fiat (2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Programming): Allows for Ford, for Lincoln, and for Mazda ECU programming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order
- Cost-effective ECU Coding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMW, for Benz and offline for BENZ, for MIT, along with PMI functions for Ford, for Mazda, and for Lincoln. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase
- OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
- 3 Years Software Update, Value for Money: With 3 years of software updates and 22+ languages(no IP restrictions), XTOOL D7S auto scanner code scanner ensures ongoing compatibility for the latest car models and improved diagnostic functions. This all system vehicle diagnostic scanner comes with a 30-day return policy and a 24-month repair for dependable performance. XTOOL are dedicated to your satisfaction, so enjoy seamless support and lifetime expert assistance. Should you encounter any issues or concerns, don’t hesitate to reach out XTOOL. D7S with newest update with 22 languages freely transfer without authorization, check details from setting-language or from XTOOL
- 🔥 Historical lowest pr-ice now on sa-le--hot se-lling.
- 【🎈𝗜𝗙𝟳𝟰𝟱 𝗽𝗲𝗿𝗳𝗼𝗿𝗺𝘀 𝟲 𝗲𝘀𝘀𝗲𝗻𝘁𝗶𝗮𝗹 𝗿𝗲𝘀𝗲𝘁 𝗳𝘂𝗻𝗰𝘁𝗶𝗼𝗻𝘀—𝗔𝗕𝗦 𝗕𝗹𝗲𝗲𝗱𝗶𝗻𝗴, 𝗢𝗶𝗹 𝗥𝗲𝘀𝗲𝘁, 𝗘𝗣𝗕, 𝗦𝗔𝗦, 𝗧𝗵𝗿𝗼𝘁𝘁𝗹𝗲 𝗥𝗲𝗹𝗲𝗮𝗿𝗻, 𝗮𝗻𝗱 𝗕𝗠𝗦—𝗽𝘂𝘁𝘁𝗶𝗻𝗴 𝗽𝗿𝗼𝗳𝗲𝘀𝘀𝗶𝗼𝗻𝗮𝗹-𝗴𝗿𝗮𝗱𝗲 𝗺𝗮𝗶𝗻𝘁𝗲𝗻𝗮𝗻𝗰𝗲 𝗯𝗮𝗰𝗸 𝗶𝗻 𝘆𝗼𝘂𝗿 𝗵𝗮𝗻𝗱𝘀.】Spongy brakes? Stuck oil light? Parking brake won't release? Off-center steering? Rough idle after battery disconnect? Draining battery? IF745 handles all with a few taps. One tool covers six dealer-level resets, saving hundreds in labor costs. ❗ NOTE: Does NOT support bidirectional control, coding, or programming.
- 【✨ 𝗜𝗙𝟳𝟰𝟱 𝗴𝗼𝗲𝘀 𝗯𝗲𝘆𝗼𝗻𝗱 𝗯𝗮𝘀𝗶𝗰 𝗰𝗼𝗱𝗲 𝗿𝗲𝗮𝗱𝗶𝗻𝗴 𝘄𝗶𝘁𝗵 𝟭𝟬 𝗶𝗻𝘁𝗲𝗴𝗿𝗮𝘁𝗲𝗱 𝗳𝘂𝗻𝗰𝘁𝗶𝗼𝗻𝘀—𝗗𝗧𝗖 𝗟𝗼𝗼𝗸𝘂𝗽, 𝗜/𝗠 𝗥𝗲𝗮𝗱𝗶𝗻𝗲𝘀𝘀, 𝗙𝗿𝗲𝗲𝘇𝗲 𝗙𝗿𝗮𝗺𝗲, 𝗟𝗶𝘃𝗲 𝗗𝗮𝘁𝗮, 𝗢𝟮𝗦, 𝗢𝗕𝗠, 𝗘𝗩𝗔𝗣, 𝗮𝗻𝗱 𝗺𝗼𝗿𝗲. 】Pulling a code tells you something is wrong. IF745 tells you what the code means, when the fault happened, and what data surrounds it. Pass emissions with one I/M Readiness tap. Freeze the fault moment with Freeze Frame. Monitor live sensor data in real time. Turn cryptic codes into clear answers.
- 【🛒 𝗜𝗙𝟳𝟰𝟱 𝗽𝗲𝗿𝗳𝗼𝗿𝗺𝘀 𝗳𝘂𝗹𝗹-𝘀𝘆𝘀𝘁𝗲𝗺 𝗱𝗶𝗮𝗴𝗻𝗼𝘀𝘁𝗶𝗰𝘀 𝗮𝗰𝗿𝗼𝘀𝘀 𝗮𝗹𝗹 𝗺𝗼𝗱𝘂𝗹𝗲𝘀—𝗲𝗻𝗴𝗶𝗻𝗲, 𝗔𝗕𝗦, 𝗮𝗶𝗿𝗯𝗮𝗴, 𝘁𝗿𝗮𝗻𝘀𝗺𝗶𝘀𝘀𝗶𝗼𝗻, 𝘀𝘁𝗲𝗲𝗿𝗶𝗻𝗴, 𝘀𝘂𝘀𝗽𝗲𝗻𝘀𝗶𝗼𝗻, 𝗯𝗼𝗱𝘆 𝗲𝗹𝗲𝗰𝘁𝗿𝗼𝗻𝗶𝗰𝘀, 𝗮𝗻𝗱 𝗺𝗼𝗿𝗲. 】Warning lights on but you don't know why? Skip the $100+ diagnostic fee at the shop. Run a complete self-check from your driveway. IF745 reads and clears fault codes, retrieves ECU info, and displays live data from every accessible module—delivering a full vehicle health report in minutes, without leaving home.
- 【✅𝗜𝗙𝟳𝟰𝟱 𝗳𝗲𝗮𝘁𝘂𝗿𝗲𝘀 𝗮 𝟳-𝗶𝗻𝗰𝗵 𝗱𝗶𝘀𝗽𝗹𝗮𝘆, 𝗲𝗿𝗴𝗼𝗻𝗼𝗺𝗶𝗰 𝗱𝗲𝘀𝗶𝗴𝗻, 𝗪𝗶-𝗙𝗶 𝘂𝗽𝗱𝗮𝘁𝗲𝘀, 𝗮𝗻𝗱 𝘇𝗲𝗿𝗼 𝘀𝘂𝗯𝘀𝗰𝗿𝗶𝗽𝘁𝗶𝗼𝗻 𝗳𝗲𝗲𝘀 𝗳𝗼𝗿 𝗵𝗮𝘀𝘀𝗹𝗲-𝗳𝗿𝗲𝗲 𝗱𝗶𝗮𝗴𝗻𝗼𝘀𝘁𝗶𝗰𝘀.】Large screen means no squinting. Intuitive navigation and customizable data displays put key info at your fingertips. Wi-Fi delivers lifetime free updates without a computer. No recurring fees. No hidden costs. Just a reliable tool that works as hard as you do.
This product presentation was made with AAWP plugin.