NHTSA ID Number: 11032730
Manufacturer Communication Number: B010224
TSB/Document Date: 2026-05-18
Summary
The EVAP systems purge (vent) valve limited warranty for defects in materials or workmanship has been extended to 15 years / 150,000 miles as determined from the original in-service date.
61 21 528
And, as needed:
61 00 006*
Or
00 58 500*
And:
13 90 500
Description
Carrying out vehicle test (Main work)
Labor Allowance
As applicable
Carrying out vehicle test (Plus work)
As applicable
Supporting voltage of the vehicle electrical system /
recharging vehicle battery
As applicable
Carrying out vehicle diagnosis, ABL (Work time)
WT FRU
Diagnosis Worktime Flat Rate (See below)
2 FRU
Replacing tank venting valve
As applicable
If you are using a Main labor code for another repair, use the Plusposition labor operation 00 00 556
instead of 00 00 006, or exclude them (including 61 21 528) when the Vehicle Test is included in
another repair.
Work time labor operation codes 61 00 006 and 00 58 500 are not considered Main labor operations.
And only if it was needed to diagnose the above issue (Corresponding Documented RO Time Support
Required):
Labor Operation
16 00 500
Description
Checking tightness of fuel tank and fuel tank
ventilation system (SI B16 01 07)
Labor Allowance
5 FRU
(*) Based on which one applies to your center, please refer to SI B01 01 20 or B01 07 20 for the
applicable procedure for documenting, claiming, and explaining, on the RO and in the claim
comments, your diagnosis work time (WT), job/repair work time (WT), and the vehicle repairs your
center performed, unless otherwise required by State law.
BMW Group’s AIR Application Resource for Flat Rate Labor Operation Codes
To obtain the corresponding flat rate unit (FRU) allowance information from the BMW
Group AIR
application resource, start by entering the the Chassis Number (last seven (7) characters of the VIN),
and click on the “Search” icon. If two or more model vehicle choices show, select the applicable
Model, or enter the full VIN (17 characters) instead. Click on the “Flat Rate Units” button and enter a
flat rate labor operation code number in the field to the right, click on the “Search” icon to display the
corresponding listing of “Flat rate unit group details” that are available.
Previous Customer-Pay Repairs – Extended Limited Warranty Reimbursement
BMW of North America, LLC (BMW NA) will reimburse certain costs for qualifying customer-pay
repairs that were performed on eligible vehicles prior to the release of this component-specific
extended limited warranty.
A qualifying customer pay repair must primarily address this Service Information Bulletin’s
identified vehicle issue and repair. Also, the repair must have been correctly, adequately, and
completely performed as required by the applicable BMW
Group approved standards, repair
procedure, processes, and policy instructions.
Eligible 2020 and newer model year vehicles as identified and added with the April 2026 SIB
update.
Customer-pay repairs are subject to the same vehicle eligibility requirements, limitations, and
exclusion criteria that apply to the BMW New Vehicle Limited Warranty for Passenger Cars and Light
Trucks.
Repairs that Do Not Qualify for Reimbursement
Repairs performed on ineligible vehicles, eligible vehicles operated and repaired outside the United
States and Puerto Rico, and/or the diagnosis and repair of other unrelated issues, or issues due to
outside influence are not covered by this extended limited warranty. This exclusion also applies to
repairs, including consequential, that were performed using non-genuine BMW parts and/or used
passenger car or light truck parts.
Requesting Reimbursement for a Previous Repair that Qualifies
For a customer to request reimbursement for a qualifying customer-pay repair performed either by an
authorized BMW center or independent repair shop located in the United States (including Puerto
Rico), please have him/her submit his/her reimbursement request online at www.BMW-RP.com
under the following reference:
•
BMW Purge Valve (ELW) 15YR.150MI
Reimbursement Request Procedure
The online process is initiated by attaching/sending PDF files of the supporting documentation for the
prior repair.
The letter also includes alternative methods to request reimbursement, either through the mail or by
fax as described below:
BMW Customer Reimbursement Center
Attention: BMW Purge Valve (ELW) 15YR.150MI
P.O. Box 54067
Hurst, Texas 76054
Fax number: 877-434-2992
Please allow 4-6 weeks for processing your request.
Should you have any questions concerning this reimbursement process, please call 1-844-857-0341.
FEEDBACK REGARDING THIS BULLETIN
Technical Feedback
Warranty Feedback
Parts Feedback
To submit feedback for the technical topics of this bulletin: Submit your
feedback in the rating box at the top of this bulletin
To submit feedback for the CLAIMS section of this bulletin: Submit an IDS
ticket to the Warranty Department, or use the chat available in the Warranty
Documentation Portal
To submit feedback for the PARTS section of this bulletin: Submit an IDS ticket
to the Parts Department
Attachment to SI B01 02 24
April 2024
47911 HALYARD DRIVE
STE. 200
PLYMOUTH
, MI 48170
DO NOT MAIL REPAIR ORDERS TO THIS ADDRESS
Sample
Sample
Sample
066558-T74-P1-020866
%m*QAA!N rFB+
CP>2MMu;x}2V
y 99I9) iI YIi)
Sample
Sample
Month 2024
Sample
This “Important Limited Warranty Information,” effective with the date listed above, applies to the
BMW
model with the Vehicle Identification Number (VIN) of AAAAAAA1234567890.
April 2024
Dear BMW Owner/Lessee:
This “Important Limited Warranty Information,” effective with the date listed above, applies to the
BMW of North
America,
NA”)
is committed
to delivering
ultimate in product satisfaction
BMW
modelLLC
with (“BMW
the Vehicle
Identification
Number
(VIN) ofthe
.
WBXHT3C5XA1234567
to our customers, toward that end, BMW is extending the limited warranty for the:
Dear BMW Owner/Lessee:
• Evaporative
Control
(EVAP)
Purge Valve,
on the
BMW
Emission
of North America,
LLC
(“BMWSystem’s
NA”) is committed
to delivering
theabove-referenced
ultimate in product satisfaction
vehicle to:
to our customers, toward that end, BMW is extending the limited warranty for the:
•
15 years/150,000
miles,
as determined
your
vehicle’s
original
in-service
date.
• Evaporative
Emission
Controlfrom
(EVAP)
System’s
Purge
Valve,
on the above-referenced
vehicle to:
• 15 years/150,000
determined
your
vehicle’s
original in-service
date.
This component-specific
extended miles,
limited as
warranty
(ELW) from
applies
to defects
in materials
and/or
workmanship.
This
coverage
is
subject
to
the
same
vehicle
eligibility
requirements
and
limitations
that
This component-specific extended limited warranty (ELW) applies to defects in materials and/or
apply to the BMW
New Vehicle
Limited Warranty
Passenger
Cars eligibility
and Lightrequirements
Trucks.
workmanship.
This coverage
is subjectfor
to the
same vehicle
and limitations that
apply to the BMW New Vehicle Limited Warranty for Passenger Cars and Light Trucks.
This is not a notice of a Recall or Service Action. This is a notice of a “component-specific
extended limited
This iswarranty.”
not a notice of a Recall or Service Action. This is a notice of a “component-specific
extended limited warranty.”
Over time, the EVAP system’s vent (purge) valve may develop material and operational issues, this can
Over time,
system’s
(purge)
valve may
and operational
issues, this can
cause hard starting,
andthe
theEVAP
engine
to run vent
rough,
especially
whiledevelop
idling. material
Additionally,
the Malfunction
cause
hard
starting,
and
the
engine
to
run
rough,
especially
while
idling.
Additionally,
the
Malfunction
Indicator Lamp (MIL) may also illuminate.
Indicator Lamp (MIL) may also illuminate.
If your vehicleIf your
is experiencing
a situation like
the onelike
described
above, please
contact
authorized
vehicle is experiencing
a situation
the one described
above,
pleaseyour
contact
your authorized
BMW centerBMW
to schedule
an
appointment
to
have
the
issue
with
your
vehicle
diagnosed.
center to schedule an appointment to have the issue with your vehicle diagnosed.
After
the BMW
center
confirms
that of
thethe
scope
of the “component-specific”
limited warranty
After the BMW
center
confirms
that
the scope
“component-specific”
extendedextended
limited warranty
coverage corresponds
to vehicle
a required
vehicle
and your
vehicle qualifies,
the authorized
coverage corresponds
and applies and
to aapplies
required
repair,
andrepair,
your vehicle
qualifies,
the authorized
center will
thepurge
“covered
repair
free of charge.
BMW centerBMW
will perform
theperform
“covered
valvepurge
repairvalve
work”
freework”
of charge.
Repairson
performed
ineligible
vehicles,
eligibleoperated
vehicles and
operated
and outside
repairedthe
outside
the United
Repairs performed
ineligibleon
vehicles,
eligible
vehicles
repaired
United
States
and
Puerto
Rico,
or
the
diagnosis
and
repair
of
issues
that
are
outside
the
intended
States and Puerto Rico, or the diagnosis and repair of issues that are outside the intended scope ofscope
this of this
extended
coverage,
otherissues,
unrelated
issues,
and/or
that
are
due toinfluences
outside influences
are not covered
by
extended
coverage,
other
unrelated
and/or
that
are
due
to
outside
are
not
covered
by
Company this extended limited warranty. This exclusion also applies to repairs that were performed using (including
this extended
limited warranty. This exclusion also applies to repairs that were performed using (including
BMW
of North America,
LLC those
repairsfrom
that using)
result from
using) non-genuine
parts
- 🔥🔥🔥🚀 【2026 Professional All-System Diagnostic...
- 🛠【28+ Essential Service Resets & Special Functions...
- ⚡ 【Advanced Bidirectional Active Test for Precise Fault...
- 🌐 【Wide Vehicle Coverage & 2026 New Car Support with...
- 💻 【Powerful Hardware & FCA
SGW Bypass for Enhanced...
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: B010224
Replacement Service Bulletin Number:
MFR Communication Date: 2026-05-05
MFR Internal Campaign ID/Software Version: 1390900300
Communication Type: Warranty Program/Extension
NHTSA Components: ENGINE
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
- Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
- 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
- Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission, ABS, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
- Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCA
Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU coding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations - 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCA
AutoAuth: Now supports FCA
SGW module for Chrysler
, for Jeep
, for Dodge
(2018+), for Fiat
(2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Programming): Allows for Ford
, for Lincoln
, and for Mazda
ECU programming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order - Cost-effective ECU Coding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMW, for Benz and offline for BENZ, for MIT, along with PMI functions for Ford
, for Mazda
, and for Lincoln
. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase - OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
- 3 Years Software Update, Value for Money: With 3 years of software updates and 22+ languages(no IP restrictions), XTOOL D7S auto scanner code scanner ensures ongoing compatibility for the latest car models and improved diagnostic functions. This all system vehicle diagnostic scanner comes with a 30-day return policy and a 24-month repair for dependable performance. XTOOL are dedicated to your satisfaction, so enjoy seamless support and lifetime expert assistance. Should you encounter any issues or concerns, don’t hesitate to reach out XTOOL. D7S with newest update with 22 languages freely transfer without authorization, check details from setting-language or from XTOOL
- 🔥 Historical lowest pr-ice now on sa-le--hot se-lling.
- 【🎈𝗜𝗙𝟳𝟰𝟱 𝗽𝗲𝗿𝗳𝗼𝗿𝗺𝘀 𝟲 𝗲𝘀𝘀𝗲𝗻𝘁𝗶𝗮𝗹 𝗿𝗲𝘀𝗲𝘁 𝗳𝘂𝗻𝗰𝘁𝗶𝗼𝗻𝘀—𝗔𝗕𝗦 𝗕𝗹𝗲𝗲𝗱𝗶𝗻𝗴, 𝗢𝗶𝗹 𝗥𝗲𝘀𝗲𝘁, 𝗘𝗣𝗕, 𝗦𝗔𝗦, 𝗧𝗵𝗿𝗼𝘁𝘁𝗹𝗲 𝗥𝗲𝗹𝗲𝗮𝗿𝗻, 𝗮𝗻𝗱 𝗕𝗠𝗦—𝗽𝘂𝘁𝘁𝗶𝗻𝗴 𝗽𝗿𝗼𝗳𝗲𝘀𝘀𝗶𝗼𝗻𝗮𝗹-𝗴𝗿𝗮𝗱𝗲 𝗺𝗮𝗶𝗻𝘁𝗲𝗻𝗮𝗻𝗰𝗲 𝗯𝗮𝗰𝗸 𝗶𝗻 𝘆𝗼𝘂𝗿 𝗵𝗮𝗻𝗱𝘀.】Spongy brakes? Stuck oil light? Parking brake won't release? Off-center steering? Rough idle after battery disconnect? Draining battery? IF745 handles all with a few taps. One tool covers six dealer-level resets, saving hundreds in labor costs. ❗ NOTE: Does NOT support bidirectional control, coding, or programming.
- 【✨ 𝗜𝗙𝟳𝟰𝟱 𝗴𝗼𝗲𝘀 𝗯𝗲𝘆𝗼𝗻𝗱 𝗯𝗮𝘀𝗶𝗰 𝗰𝗼𝗱𝗲 𝗿𝗲𝗮𝗱𝗶𝗻𝗴 𝘄𝗶𝘁𝗵 𝟭𝟬 𝗶𝗻𝘁𝗲𝗴𝗿𝗮𝘁𝗲𝗱 𝗳𝘂𝗻𝗰𝘁𝗶𝗼𝗻𝘀—𝗗𝗧𝗖 𝗟𝗼𝗼𝗸𝘂𝗽, 𝗜/𝗠 𝗥𝗲𝗮𝗱𝗶𝗻𝗲𝘀𝘀, 𝗙𝗿𝗲𝗲𝘇𝗲 𝗙𝗿𝗮𝗺𝗲, 𝗟𝗶𝘃𝗲 𝗗𝗮𝘁𝗮, 𝗢𝟮𝗦, 𝗢𝗕𝗠, 𝗘𝗩𝗔𝗣, 𝗮𝗻𝗱 𝗺𝗼𝗿𝗲. 】Pulling a code tells you something is wrong. IF745 tells you what the code means, when the fault happened, and what data surrounds it. Pass emissions with one I/M Readiness tap. Freeze the fault moment with Freeze Frame. Monitor live sensor data in real time. Turn cryptic codes into clear answers.
- 【🛒 𝗜𝗙𝟳𝟰𝟱 𝗽𝗲𝗿𝗳𝗼𝗿𝗺𝘀 𝗳𝘂𝗹𝗹-𝘀𝘆𝘀𝘁𝗲𝗺 𝗱𝗶𝗮𝗴𝗻𝗼𝘀𝘁𝗶𝗰𝘀 𝗮𝗰𝗿𝗼𝘀𝘀 𝗮𝗹𝗹 𝗺𝗼𝗱𝘂𝗹𝗲𝘀—𝗲𝗻𝗴𝗶𝗻𝗲, 𝗔𝗕𝗦, 𝗮𝗶𝗿𝗯𝗮𝗴, 𝘁𝗿𝗮𝗻𝘀𝗺𝗶𝘀𝘀𝗶𝗼𝗻, 𝘀𝘁𝗲𝗲𝗿𝗶𝗻𝗴, 𝘀𝘂𝘀𝗽𝗲𝗻𝘀𝗶𝗼𝗻, 𝗯𝗼𝗱𝘆 𝗲𝗹𝗲𝗰𝘁𝗿𝗼𝗻𝗶𝗰𝘀, 𝗮𝗻𝗱 𝗺𝗼𝗿𝗲. 】Warning lights on but you don't know why? Skip the $100+ diagnostic fee at the shop. Run a complete self-check from your driveway. IF745 reads and clears fault codes, retrieves ECU info, and displays live data from every accessible module—delivering a full vehicle health report in minutes, without leaving home.
- 【✅𝗜𝗙𝟳𝟰𝟱 𝗳𝗲𝗮𝘁𝘂𝗿𝗲𝘀 𝗮 𝟳-𝗶𝗻𝗰𝗵 𝗱𝗶𝘀𝗽𝗹𝗮𝘆, 𝗲𝗿𝗴𝗼𝗻𝗼𝗺𝗶𝗰 𝗱𝗲𝘀𝗶𝗴𝗻, 𝗪𝗶-𝗙𝗶 𝘂𝗽𝗱𝗮𝘁𝗲𝘀, 𝗮𝗻𝗱 𝘇𝗲𝗿𝗼 𝘀𝘂𝗯𝘀𝗰𝗿𝗶𝗽𝘁𝗶𝗼𝗻 𝗳𝗲𝗲𝘀 𝗳𝗼𝗿 𝗵𝗮𝘀𝘀𝗹𝗲-𝗳𝗿𝗲𝗲 𝗱𝗶𝗮𝗴𝗻𝗼𝘀𝘁𝗶𝗰𝘀.】Large screen means no squinting. Intuitive navigation and customizable data displays put key info at your fingertips. Wi-Fi delivers lifetime free updates without a computer. No recurring fees. No hidden costs. Just a reliable tool that works as hard as you do.
This product presentation was made with AAWP plugin.




